Sigil won't run after boost-libs update

sigil 0.8.6-1
boost-libs 1.58.0-1
/usr/share/sigil/sigil-real: error while loading shared libraries: libboost_filesystem.so.1.57.0: cannot open shared object file: No such file or directory

Open a bug report, somehow this package missed the boost rebuild list. Probably because libs are installed in /usr/share instead of /usr/lib as they should

Similar Messages

AE CS6 won't run after the Mavericks 10.9.3 update

My AE CS6 won't run after the Mavericks 10.9.3 update the other day. I was prompted that the current version of my AE was 11.0, so I searched and found the seemingly most up-to-date here: Adobe - After Effects : For Macintosh : Adobe After Effects CS6 11.0.4 Update : Thank You
My question is this: since I'm new to Mac, should I download the update and install it to my existing instance of AE and it will allow AE CS6 to run as normal? And the way to install the update is simply to double-click the .dmg?
Thanks!

Instructions for installing the update are on the download page here:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5696

ITunes won't open after downloading software update. Macbook Pro OSX10.6.8 Simple solution?

iTunes won't open after downloading software update. Macbook Pro OSX10.6.8 Simple solution? And by the way, this is apparently a common problem and Apple has completely failed to warn in advance or offer a quick straightforward solution - used to be a good company, but it's becoming just another crappy screw-the-consumer corporation.

It would help to know versions here. I'm guessing your update put an older version of something into a place where a newer version of something iTunes put in there existed. Updating an earlier OSX version to 10.6.8 is still only updating to system software that was issued several years ago. If you are running some slightly newer version of iTunes issued subsequent to 10.6.8 and you just updated to 10.6.8 you may have put in an older version of something iTunes uses. Anyway, I'm guessing here until we know exactly what you did.

Mac won't boot after the latest update. It is loading the update and suddenly shuts down

My MacBook Pro won't boot after a minor update. The update was all fine and my Mac acted like it used to but when I tried to boot my Mac it just loads the the update then goes back to the Apple logo and then shuts down.
I hope that someone has got a solution because I do not want to restore my Mac for the 4th time.....

Hello JonasHallund,
We've an article that contains information and steps that can help get your MacBook Pro to boot again.
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Cheers,
Allen

Video won't run. telling me to update flash player. click on update for mac won't load?

video won't run, telling me to update flash player, click on update for mac won't update. do i need to load flash player and is it ok for mac?

Yes, it's fine for your Mac ...
Most sites such as YouTube require the Flash plugin.
Flash isn't a player per se, but a plugin.
Sometimes uninstalling the current plugin then reinstalling new can help.
Troubleshoot Flash Player | Mac OS
Make sure and uninstall the old plugin first then restart your Mac.
If you use Safari to view videos, from the Safari menu bar click Safari > Empty Cache
Now try a video.
edited by: cs

Itunes won't run after download

itunes won't run after download. simply asks to acknowledge agreement which I did. help

You appear to be able to backup your contacts without iTunes. Google "backup iphone contacts without itunes".
The way to avoid having to get a tech person in is to get past the idea that your problem (which you still haven't defined) is "beyond my ability to fix". ;-)

Programs won't run after update to 10.6.7

Hi
I have just inherited an early 2008 iMac following my Dad's death a few months ago. So I have no Mac experience at all. On receiving it, I booted it up and a list of recommended software updates appeared which I ran, and by all accounts successfully installed. One of them was an update to 10.6.7
Previous to the update I could access the installed programs. Now I can access barely any of them.
Error message reads:
Application name cannot open.
Check with the developer to ensure this version of application name works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS.
There aren't any further updates needed. Every time I check, I'm advised everything is uptodate. So last night I reinstalled iTunes, downloading the latest version. That won't run. Same error message.
I'm unsure what to do now. I don't have any disks etc at the moment as Mum is still trying to locate them (they had more than one property and this has come out of one that has been boxed up and put onto the market).

This is a typical error report. The section I have bolded out seems to be common in all the errors.
Process:         iTunes [500]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         ??? (???)
Build Info:      iTunes-10221201~1
Code Type:       X86 (Native)
Parent Process: launchd [105]
Date/Time:       2011-05-11 06:38:32.490 +0100
OS Version:      Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report:          15167 sec
Crashes Since Last Report:           305
Per-App Crashes Since Last Report:   6
Anonymous UUID:                      DCCD367C-006F-4EEF-8457-3885D045DBBE
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: no suitable image found. Did find:
          /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
          /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.9)
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDP725032GLA380, 298.09 GB
Parallel ATA Device: MATSHITADVD-R   UJ-875
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000

Java won't run after latest update

I just installed the latest update for Mountain Lion and now my java won't run. I have tried all of the hints from Java's site and am stumped.
Any ideas?

This explains why. You need to download the latest Java from Oracle's site.

ITunes won't open after latest OSX update

AFter latest OSX update iTunes won't open. Reinstalled iTunes. Reinstalled OSX update. When I click on icon in applications or in finder nothing happens.

This is what worked for me and others--original post found on this thread: Yosemite slow opening and cannot open itunes
This solved my question by Linc Davis.......
According to multiple reports on this site, Apple Support has given the following instructions to others who had a similar problem. I can't confirm that this procedure works or that it's necessary, but it won't leave you any worse off than you are now.
First, back up all data.
Select the iTunes icon in the Applications folder and open the Info window. Click the padlock icon in the lower right corner to unlock the settings.
In the Sharing & Permissions section, change the Privilege setting for each Name in the list to Read & Write. Close the window. If the settings aren't visible, click the disclosure triangle on the left so that it points down.
You should now be able to drag the iTunes application to the Trash and empty. Your iTunes data won't be affected.
Click the iTunes link at the top of this page, download the installer package and run it.
If iTunes still doesn't launch, or if you can't complete the procedure, reinstall the OS.

Calculation Script... won't run after restart of acrobat

I added a custom calculation script to a field. Works like a charm.
However if I restart acrobat the script refuses to run. I go in and confirm the script is there.
If i go in an just add a space or a comment to the script it will start running again.
Any ideas?
I also saved the PDF and opened it in reader on another machine. Won't run there.
So I attached it to an onfocus event and that seems to work fine after saving??
So I then tried adding a "simplified field notation" and the same behavior exists there. If i restart acrobat the only way i can get the simple notation to run is if I remove it and then re-add it. Otherwise it does nothing.
Am I missing something obvious?
Thanks in advance.

George,
I wasn't clear enough. The script does nothing. Editing values of text boxes that would trigger the calculation to occur will not run until after I have edited the script. (something as silly as just adding a comment will cause it to work again)
For the simple calculation I need to remove it completely and add it again before it will work
Here is an example for a net worth box:
Add to "simple field notation"
assets - liabilities
Then I hit ok and whenever I add in some liabilities or assets those 2 fields are updated and my networth field is updated. Thats works great
I save the file and then open it back up and add some liabilies/assets and the fields I used the built in "sum" function on continue to work (assets and liabilities) however my "simple field notation" does not update my networth field.
I go back into field designer and verify that the simple field calculation radio box is still selected and that it still says
assets - liabilities
It continues not to run. I then go back in and edit it to remove the calculation.
I then open it up again and select "simple field notation" and type in
assets - liabilities
This then works immediately and i am happy again until i save/restart acrobat (or try to open the PDF on another PC)
Then I am sad again because the script doesn't run.
I tried all these same steps with a JavaScript too. It will work until acrobat is restarted. If i edit the script by adding a space or comment it will start running again.
So frustrating! Any help is appreciated.

Safari 3.0.2 won't run after 3.0.1 worked fine

Safari 3.0.1 was working fine for me on win xp pro after copying fonts to address text problem. I downloaded 3.0.2 and installed. the install appeared to work fine, but when I try to run safari, i get no error and it won't run. I've turned off firewall & AV software, etc. I have uninstalled and re-installed. I even tried reinstalling 3.0.1 after uninstalling 3.0.2. all to no avail. any suggestions?
Windows XP Pro

just a suggestion but have you tried cleaning safari from your registry?? The reason I ask is because if you save bookmarks then uninstall safari and then reinstall it still has your bookmarks, so not all files are being deleted upon uninstall. Don't know if that helps you but its worth a try

Captivate 5.5 - SCORM Project won't run after Captivate 7 installation

Good afternoon,
I had completed a Captivate 5.5 project for a few months and as of about a month ago I have had Captivate 7 installed on the machine. Due to some widgets that are implemented in the project that only run in 5.5, I have not used Captivate 7.
I also have not had cause to reopen the project until recently to make some changes. However, now when I publish the files, package them in the MultiSCO Packager, and put them in CMS - it won't run.
I've verified that the CMS is not the issue: if I repost the pre-Captivate 7 version it works just fine and the only changes I made to the original files were cosmetic and minor.
Now when I republish the files in 5.5 and package them, the files look different, publishing all of the zips into a "Linear" subfolder. I couldn't help but notice that this is the same as Captivate 7 publishes except without any accompanying XML files. Why would Captivate 5.5 be affected by Captivate 7 being updated on the machine?
Is there any solution to this other than having to open the 5.5 files in 7 and replace every widget? This is a huge expenditure of time when I was under the impression that if 5.5 was still installed it would run completely independent of the Captivate 7 changes.
Any help would be appreciated,
Jaimeson

Don't be too quick to write off the LMS/CMS as the issue. You need to be aware that with Cp6 Adobe totally revamped their SCORM drivers so there is now little similarity between output of 5.5 to 7 in this area. It is also no longer possible to use Cp7 SCORMs in the Cp5.5 era Multi-SCORM Packager tool. They are not compatible. You must make sure the CP7 SCORMs are matched with the Multi-SCORM Packager that came with Cp7.
Once you get compatible SCORMs published, try uploading them to SCORM Cloud LMS to test. If they work fine on SCORM Cloud then they should work on your CMS (if it is truly SCORM compliant).
Your issue with the widgets not working in Cp7 might be resolvable if you update the widgets. Have you checked with the original widget developer to see if they have updates available? If you have several widgets of the same type and version in each project file, then there is a trick to updating all of them in one go (per project file).
See the heading in the lower part of this page:
http://www.infosemantics.com.au/adobe-captivate-widgets/widget-updates
But be warned that this only works if the widget filename is exactly the same, and you are doing this from the same computer that was used to originally insert the same widgets, because the path to the external widget file must be replicated.

ITunes won't run after downloaded.

I downloaded iTunes to Windows XP successfully, but it won't run when I attempt to open it. Nothing happens. My iPod should arrive in a week and I want to have iTunes prepared to transfer songs ASAP!
Why won't iTunes open after I've successfully downloaded it??!!

...ok, I downloaded iTunes 6.0 and it worked fine until my iPod cam and it said I needed version 7.0 or higher to transfer songs[thanks a lot apple].

Audigy 2 ZS Diagnostics Won't Run After Driver Upd

Diagnostics worked fine until I updated mu Audigy 2 ZS drivers to the latest version; 02.08.0004. I'm running XP Pro SP2. Followed the Creative update instructions to the letter. Downloaded the update package to my machine. Nothing else was running when I executed the update package. Even disabled network and then my AV. Now Diagnostics gets as far as the hardware Wave test then just literally disappears. No error messages, no application or process hangs showing in task manager and no errors showing up in XP event viewer.
Tech Support says this shouldn't indicate that anything else is effected as long as the sound works, which it does. They couldn't explain why it won't run.
My question: is there some way to safely delete this program? Since it doesn't work anymore it's useless and just taking up space.
Thanks in advance for any help provided.

I had the same problem but here is the solution (at least it worked for me)
Click on Windows Start button. Select Run. Type in Regedit and click OK to run it. Navigate to to the node "HKEY_LOCAL_MACHINE\<EM>Software\Creative Tech\Software Installed</EM>" and delete the node. Then navigate to the node "HKEY_LOCAL_MACHINE\<EM>SOFTWARE\Microsoft\Windows\CurrentVersion\Unin stall\5CDDF96A-BC34-4D72-9ABA-EFFF0C39977</EM>" and delete the node.

HTML DB won't run after Install

I've installed htmldb twice using the htmldb_1.6.0.zip file. In both instances it won't run, with identical behavior. Here's my configuration:
dads.conf:
Alias /i/ "C:\oracle\product\10.1.0\MT\Apache\Apache\images/"
<Location /pls/htmldb>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDatabasePassword ######
PlsqlDatabaseConnectString localhost:1521:dev
PlsqlDefaultPage htmldb
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
</Location>
marvel.conf:
          <Location /pls/htmldb>
          SetHandler pls_handler
          Order deny,allow
          Allow from all
          AllowOverride None
          PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
          PlsqlDatabasePassword ######
          PlsqlDatabaseConnectString 127.0.0.1:1521:dev
          PlsqlDefaultPage htmldb
          PlsqlDocumentTablename wwv_flow_file_objects$
          PlsqlDocumentPath docs
          PlsqlDocumentProcedure wwv_flow_file_manager.process_download
          PlsqlAuthenticationMode Basic
          PlsqlNLSLanguage AMERICAN_AMERICA.WE8ISO8859P1
          </Location>
Error Log:
[Wed Apr 06 16:03:43 2005] [notice] FastCGI: process manager initialized
[Wed Apr 06 16:03:50 2005] [error] [client 127.0.0.1] [ecid: 1112825030:192.168.1.6:4040:3216:1,0] mod_plsql: DAD '/pls/htmldb' is disabled because of misconfiguration. Please refer to the log entries during server startup up for more information.
[Wed Apr 06 16:03:50 2005] [error] [client 127.0.0.1] [ecid: 1112825030:192.168.1.6:4040:552:1,0] File does not exist: c:/oracle/product/10.1.0/mt/apache/apache/htdocs/favicon.ico
The file favicon.ico does not exist anywhere in the oracle directory tree. I can log into my database using sqlplus and the username/password listed in the dads.conf. I don't see anything else that I should check...any ideas?

418849,
favicon.ico is not the issue
I see two issues:
1) If both dads.conf and marvel.conf are included in the Apache configuration, then that will be an error as you cannot have two Database Access Descriptors defined with the same name.
2) You're missing the 'ServiceNameFormat' string after your value for PlsqlDatabaseConnectString.
Joel

Sigil won't run after boost-libs update

Similar Messages

Maybe you are looking for