Sign Body with a concrete certificate on Business Service in OSB

We want to use in our programs an external ws, and this require that the body of the message goes signed.
For make easier the use of this service in our programs, i would like this sign is made by OSB (Oracle Service Bus).
Then..
1.- I Have configured the keystore of OSB with the certificated.
2.- I have made the business service, with the end-point the external ws.
3.- I Have configured the sign-body ws-policy in business service.
4.- When i prove it with debug console of OSB, i select the keystore provider and it works fine.
The problem is:
when i make the proxie service from the business service, it seems that the business service give the requeriment to the proxi for sign the body.
and what i want is publish the proxie service, without this requirement, and sign the body en the same proxie with de determined key provider...
The problem is:
When i make the proxie service from the business service, it seems that the proxie service inherits the requeriment for sign the body.
and what i want is publish the proxie service, without this requirement, and sign the body en the same proxie with key provider...
In Other word, i would like the body message was signed by proxie service, and not by programs.
I don't know how configure it on OSB.. ¿Can anyone help me?
Thanks
I don't know how configure it in OSB.. ¿Can anyone help me?
Thanks

Hi 990437 ,
want to replace the directory path with a variable.. and i am calling this service in my proxy service using service callout.Inside service callout -- Request Actions -- use Routing Options action and assign variable in URI expressions
OR if you are using JCA File adapter
Inside service callout -- Request Actions -- use Set Transport Headers action
Set Transport Header for Outbound request and add Header.Browse to jca.file.Directory from dropdown box in header and assign the new new directory location
( variable ) in under Action -- Set Header --Expression
Regards,
Abhinav Gupta

Similar Messages

How to keep data integrity with the two business service in OSB 10.3.1.0

How to keep data integrity with the two business service in OSB 10.3.1.0
In our customer system, customer want to keep data integerity between two businness service. I thinks this is XA transaction issue.
Basing customer requirment, I created a testcase but I can't keep data integerity, For detail information, please refer the attached docs.

Can you please explain what you meant my data integrity in your use case?
Manoj

Best practices for Calling Multiple Business Services in OSB

Hi All,
I have a requirement where I need to call multiple business services in OSB. We are presently calling them sequentially in a proxy pipeline. I was wondering if we could accomplish the same task in a better way. Each of the business services are mutually exclusive.
Thanks in Advance,
Rudraksh

Hi Eric,
Thanks for the response. We figured that it is possible to call multiple services with Split Join. However, we ran into the issue you described. We had a blocking call and had to wait until each of the services returned a response.
However, we needed a Async model for our design and felt that this might not be a right fit.
We are now looking at implementing the publish option with QoS configured as this fits our usecase better. Thanks for the help again.
Rudraksh

Using a uddi key to create a business service in OSB

I want to be able to use a service registry key when creating a business service in OSB. I've found documentation on how to do this in Oracle ESB, but not in OSB.
From the documentation for OSB, I can only find a way to synchronize the business services imported from the service registry (when i search through the imported services there is no mention of the uddi key that i can see). I can choose to auto-import when setting up the registry, but I'm not sure exactly what this behavior does.
From the console documentation (http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/uddi.html)
"You can use the Auto-Import Status page to synchronize changes to a service with those present in the registry. Upon any changes to a service in the registry, Oracle Service Bus provides notification of the change on the Auto-Import Status page which lists all out-of-sync services. You can then synchronize the service in the Oracle Service Bus Console with the corresponding service in the UDDI registry."
This setting seems to automatically update the endpoint of the business service wihtout that administrator having to do anything, but what is actually being done? Is the service bus updating the endpoint as soon as it has been notified of a change or when i view/call the service is the endpoint being looked up?
Am I missing something??
Edited by: user498458 on Apr 27, 2009 11:30 AM

I took your advice and re factored the Receive class so it had all the functionality I needed except two methods which would then be overridden in the derived classes. What I had a hard time understanding is once an object of class say SpecialReceive extends Receive it can be referred to as Receive yet still maintain that it's a SpecialReceive.
What I mean is if I give a Receive object to some method and this method has no idea that this object is actually SpecialReceive and it calls a method say run() which gets overridden by the SpecialReceive. I thought that since this method has no idea what type of Receive this object is it will execute Receive's run(). But it actually does know what type of class it is and it executes the right run() method (the one that SpecialReceive overrides).
After I realized this there is no more need for casting.
Thanks everyone for your contributions.

Problem in creating JMS business service in OSB

Hi all
I am creating a JMS business service in osb:request /response is TEXT
It write to "*QueueSend*"-which is my URI endpoint
I have a MDB which read from "*QueueSend*" and write to "*QueueReceive*"
i have given the *"Response Endpoint*" in jms business service to point to "*QueueReceive*"
When i send the msg, it write to QueueSend and mdb writes it to QueueReceive but JMS business service doesn't read from QueueReceive,it just wait a long .......
What is the problem??
Thanks
Rohan

Hi Rohan,
Are you able to see consumers on "QueueReceive"?
If no, then your BS is not listening on this queue. Check the end-point again. Check server logs to know if any error occured while BS tried to connect with Queue. Restart your server which has this queue and then the OSB, and try again.
Regards,
Anuj

Having multiple Stored procedure in a single Business Service in OSB

Hi,
Please let me know is it possible to have multiple Stored Procedure inside one business service in OSB.
Regards,
Abdul

Hello Abdul,
It is not possible to serve multiple stored procedures/functions with one business service because one business service can be based on one adapter only and one DB adapter can interface one DB component only. You may have one stored procedure which internally makes call to all other procedures as per your requirement and from OSB, call this single stored procedure using one business service.
Regards,
Anuj

Dynamic csf-key to Business service of OSB?

We have created single Business Service which is getting called from one proxy service to execute different Web Service end points.
For different end point execution I want to pass different authentication parameters.
Currently we have configured User Id and Password through single csf-key through policy.
Since csf-key is secured option to pass authentication parameters to end point, is it possible to configure dynamic csf-key to Business service of OSB?

Create a business service using file transport and type "Text".
Obtain the file name and assign to $body in ur proxy service stage and publish to the business service u just created.

Provide authenticated username as parameter to a business service in OSB 12c

Dear OSB/OSB experts,
I have the following issue:
1. I have a web service that would accept username as a parameter in the SOAP request in order to do some internal authorization checks (filtering database rows, tables, etc.)
2. I want to connect that web service as business service in OSB 12c
3. The proxy service should NOT accept username as parameter
4. The proxy service should be protected via OWSM policy for authentication (either against the WLS authentication providers or through SAML tokens validation)
Based on the above is there any mechanism in the implementation of the proxy service to get the authenticated username from the security context and provide it as a parameter to the business service?
The authentication policy could use SAML tokens between two WLS domains - one will be running the WLS where proxy service clients will be running and the other - for the SOA 12c.
Many thanks in advance,
Anatoli

HI,
u can use Conditional Branching
http://docs.oracle.com/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1061670
Split join would be used in case u need to split your request and call your Business Service in Serial/parallel & then gather resposnes from multiple callouts to have single response
http://docs.oracle.com/cd/E13159_01/osb/docs10gr3/userguide/splitjoin.html#wp1137258
Abhinav

Read Timeout is not working with business service in OSB 11.6

HI All,
We have set below configuration in "Http Transport Configuration" of a business service.
Read Timeout- 8
Connection Timeout - 8
Authentication - None
Proxy Serve
Follow HTTP redirects - Disable
Use Chunked Streaming Mode - Enable
Even though backend is taking more than the configured value in Read Timeout but timeout is not happening in OSB, Connection time out also not worked, when we tested with wrong backend URL.
Any help for this configuration would appreciated.
Thanks,.

Hi,
Have you invoked any Services before calling the Business Service.
If Yes, then the problem with the Invoked service.In this scenario even if you set the time out period it will not work..
If No, your request payload is high
Regards,
Kiran

No port binding available with 11.1.1.8 business services

I am creating DBAdapter services in jdev and then trying to create Business Services in OEPE. I was using the 11.1.1.4 with no issues, but had to upgrade so the server and dev tools were in sync for easy deployment.
Basically when you select the WSDL in the business service it does not see the port binding so you can't complete the creation of the service. It appears the new version does not import things correctly. In the previous version it referenced the WSDL but the new import WSDL looks nothing a like the previous version. I have a fair amount of experience doing this so I am kinda scratching my head as to the deltas and it not recognizing the port binding in the wsdl. Not sure if I need to upgrade jdev 10 11.1.1.6 as I am using 11.1.1.5.
Any help would be appreciated.

I found what the issue is but not sure what the fix is. I selected a sequence when on the last step of the wizard and that is causing issues with the wsdl file. If I remove that things work correctly
Edited by: sjackson on Mar 11, 2012 1:46 AM

Failed Calling A X.509 Certificate Secured Web Service From OSB

Hi,
I have wsdl resource, business service and proxy service setup in OSB 11.1.1.6 on Linux. The business service will consume a X.509 certificate secured web service running on a remote server.
Below is my approach:
The consumer of the proxy service of OSB signs its saop request header.
My OSB proxy service authenticates the signature and forward the request to business service.
The business service signs the outbound soap request header. (To do this I configured the keystore in Security Provider Configuration of my SOA_domain in Enterprise Manager. Also I applied Web Service Policy of Service Client type to the business service.)
This is not working yet. Not sure if my approach is correct or not?
Thank you,
Eric

I validated the keystore, all the certificates used and the value for keystore.sig.csf.key / value for keystore.recipient.alias. They are all as expected. Restarted the server. Still failed for OSB to invoke the remote secured web service, but worked if only use soapUI to invoke the same remote secured web service directly.
The error message is:
General security error (WSSecurityEngine: No crypto property file supplied for decryption); nested exception is org.apache.ws.security.WSSecurityException: General security error (WSSecurityEngine: No crypto property file supplied for decryption)
In the soap request / reponse message shown in the OSB Test Console, there seems to be two signature sections in the header and encryption section although I tried not to encrypt the soap request. I am using Web Service Client Policy "calpers/wss11_x509_token_with_message_integrity_client_policy_osb" which was created based on "oracle/wss11_x509_token_with_message_protection_client_policy". The difference between the two policies is my policy not to sign nor to encrypt entire body.
In the "Message Signing Setting" section, I unchecked the "Include Entire Body" and left the three default namespaces under the Header Elements.
In the "Message Encrypt Setting" section, I unchecked the "Include Entire Body" and also left the one default namespace under the Header Elements.
I don't know how to attach document here, so i add long saop message here.
     Business Service Testing - BookSec_Biz_Svc_52
     Request Document
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
<soapenv:Body>
<book:BookRequest xmlns:book="http://www.dortman.com/books/BookService">
<book:bookId>10</book:bookId>
<book:bookTitle>eric</book:bookTitle>
<book:bookAuthor>Z</book:bookAuthor>
</book:BookRequest>
</soapenv:Body>
</soapenv:Envelope>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<wsse:Security soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsu:Timestamp wsu:Id="Timestamp-eEud1RcUOPcnV0fDqd6gZQ22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsu:Created>2013-03-14T18:10:00Z</wsu:Created>
<wsu:Expires>2013-03-14T18:15:00Z</wsu:Expires>
</wsu:Timestamp>
<wsse:BinarySecurityToken ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" wsu:Id="BST-VnzMtSwHMI8THKi2hhG2SQ22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
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
</wsse:BinarySecurityToken>
*<dsig:Signature* Id="XSIG-oISn2AADumTdR86sONuz8g22" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#">
<dsig:SignedInfo>
<dsig:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
<dsig:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#hmac-sha1"/>
<dsig:Reference URI="#Timestamp-eEud1RcUOPcnV0fDqd6gZQ22">
<dsig:Transforms>
<dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
</dsig:Transforms>
<dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
<dsig:DigestValue>3LQ1IpQR3rKHvP6Ov/m9ZRoecZM=</dsig:DigestValue>
</dsig:Reference>
</dsig:SignedInfo>
<dsig:SignatureValue>X2BUn9TLL26Ay9A3HGEn/mnGCCE=</dsig:SignatureValue>
<dsig:KeyInfo>
<wsse:SecurityTokenReference>
<wsse:Reference URI="#EK-h7saqC1VyBKZw2n1IHz8GQ22" ValueType="http://docs.oasis-open.org/wss/oasis-wss-soap-message-security-1.1#EncryptedKey"/>
</wsse:SecurityTokenReference>
</dsig:KeyInfo>
+*</dsig:Signature>*+
*<dsig:Signature* xmlns:dsig="http://www.w3.org/2000/09/xmldsig#">
<dsig:SignedInfo>
<dsig:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
<dsig:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/>
<dsig:Reference URI="#BST-VnzMtSwHMI8THKi2hhG2SQ22">
<dsig:Transforms>
<dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
</dsig:Transforms>
<dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
<dsig:DigestValue>dau9qjB2lxIvlaoDIHuWVHqjulI=</dsig:DigestValue>
</dsig:Reference>
<dsig:Reference URI="#STR-QC3ZDBRwsXv8unEWVns9rQ22">
<dsig:Transforms>
<dsig:Transform Algorithm="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#STR-Transform">
<wsse:TransformationParameters>
<dsig:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
</wsse:TransformationParameters>
</dsig:Transform>
</dsig:Transforms>
<dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
<dsig:DigestValue>nPO9mKSC9cMg2fEkGZI+ujy5O1Q=</dsig:DigestValue>
</dsig:Reference>
<dsig:Reference URI="#XSIG-oISn2AADumTdR86sONuz8g22">
<dsig:Transforms>
<dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
</dsig:Transforms>
<dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
<dsig:DigestValue>qXkW/ZFFNc8Bu0VL9eF6c4np7IA=</dsig:DigestValue>
</dsig:Reference>
</dsig:SignedInfo>
<dsig:SignatureValue>
MuHCTh5cW8TiVKtkWFl+Of2EFAiHwuPTR7J9b4/n2KZtPy2OCrgi1lBpuzhFKLhoBxYNOK8TMOa/3b223Vv+CQUfUP7z0YVj5Ck7QETYngaQlS07KulnstJjsAgHBV8Zk3A0EafuWF2c3t5wBzEkgEC99v0EdY3mRiCzt7vh2qs=
</dsig:SignatureValue>
<dsig:KeyInfo Id="KeyInfo-0LT1QavoIVXOHesZfrxTwg22">
<wsse:SecurityTokenReference>
<wsse:Reference URI="#BST-VnzMtSwHMI8THKi2hhG2SQ22" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3"/>
</wsse:SecurityTokenReference>
</dsig:KeyInfo>
+*</dsig:Signature>*+
*<xenc:EncryptedKey* Id="EK-h7saqC1VyBKZw2n1IHz8GQ22" xmlns:xenc="http://www.w3.org/2001/04/xmlenc#">
<xenc:EncryptionMethod Algorithm="http://www.w3.org/2001/04/xmlenc#rsa-oaep-mgf1p">
<dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#"/>
</xenc:EncryptionMethod>
<dsig:KeyInfo xmlns:dsig="http://www.w3.org/2000/09/xmldsig#">
<wsse:SecurityTokenReference wsu:Id="STR-QC3ZDBRwsXv8unEWVns9rQ22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:KeyIdentifier ValueType="http://docs.oasis-open.org/wss/oasis-wss-soap-message-security-1.1#ThumbprintSHA1" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary">q9Z9yPxvNw4CvSLQNI4rxVlSF+w=</wsse:KeyIdentifier>
</wsse:SecurityTokenReference>
</dsig:KeyInfo>
<xenc:CipherData>
<xenc:CipherValue xmime:contentType="application/octet-stream" xmlns:xmime="http://www.w3.org/2005/05/xmlmime">
Tgdhxy6wMJBBrw23iq1GLCm0TYKBXSVQvBcN+7TXdXL6FPSjhcbfXqtoz7wzirbSwUZuu+DrYuWs
0BjRXqw3auUSCMlkm4IoT1ag3wFQQ/PEbB8HNlYhW3gp/At3toTw+k5p9wOUd4BMFAiXyeHQ8+dQ
8JUiohXhiHErTDn6fFQ=
</xenc:CipherValue>
</xenc:CipherData>
</xenc:EncryptedKey>
</wsse:Security>
</soap:Header>
<soapenv:Body>
<book:BookRequest xmlns:book="http://www.dortman.com/books/BookService">
<book:bookId>10</book:bookId>
<book:bookTitle>eric</book:bookTitle>
<book:bookAuthor>Z</book:bookAuthor>
</book:BookRequest>
</soapenv:Body>
</soapenv:Envelope>
     Response Document
The invocation resulted in an error: Internal Server Error.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Client</faultcode>
<faultstring xmlns:lang="en">
General security error (WSSecurityEngine: No crypto property file supplied for decryption); nested exception is org.apache.ws.security.WSSecurityException: General security error (WSSecurityEngine: No crypto property file supplied for decryption) </faultstring>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
     Response Metadata
<con:metadata xmlns:con="http://www.bea.com/wli/sb/test/config">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:user-header name="Accept" value="text/xml"/>
<tran:user-header name="Expires" value="Thu, 14 Mar 2013 18:10:01 GMT"/>
<tran:user-header name="SOAPAction" value=""""/>
<http:Cache-Control>max-age=0</http:Cache-Control>
<http:Connection>close</http:Connection>
<http:Content-Type>text/xml; charset=UTF-8</http:Content-Type>
<http:Date>Thu, 14 Mar 2013 18:10:01 GMT</http:Date>
<http:Server>Apache</http:Server>
<http:Transfer-Encoding>chunked</http:Transfer-Encoding>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">2</tran:response-code>
<tran:response-message xmlns:tran="http://www.bea.com/wli/sb/transports">Internal Server Error</tran:response-message>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">UTF-8</tran:encoding>
<http:http-response-code xmlns:http="http://www.bea.com/wli/sb/transports/http">500</http:http-response-code>
</con:metadata>

Calling Secured Business Service from OSB

Hi,
I am trying to call a Service which is secured.
the Request SOAP message is like :
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:ns="urn:crmondemand/ws/activity/10/2004"
xmlns:act="urn:/crmondemand/xml/activity"
xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
*<soapenv:Header>*
*     *<wsse:Security>**
*          *<wsse:UsernameToken>**
*               *<wsse:Username>USERX</wsse:Username>**
*               *<wsse:Password type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">PASSWORD</wsse:Password>**
**          </wsse:UsernameToken>**
*     </wsse:Security>*
*</soapenv:Header>*
<soapenv:Body>
========================
========================
</soapenv:Body>
</soapenv:Envelope>
I have created a business service and attached the service to Proxy service.
I am new to OSB.I am unable to change the header data.In the forums i found couple of responses pointing to create
Policy file or creating service account which were not clear to me.Dear expert , please guide me what exactly need to be done in this case.
Thanks in advance,
Regards,
Chandra

hi,
Finally i have done it with the help of documentation.
solution is :
In the service configuration --> Policy -->select OWSM policy bindings (your domain should be configured with OWSM extention))
select predefined oracle/wss_username_token_client_policy from in the OWSM configuration window
next login to the em console: http://localhost:7001/em
In the left hand side pane Go to Weblogic Domain -> select <your domain name>
In the central pallete Weblogic Domain drop down goto secutiry --> Credentials.
Here create a map with name : oracle.wsm.security (if not exists)
Create a key by selecting the map as :oracle.wsm.security
Key name : Sample_KEY
Type : password
Username: The username you are expecting in the soap header
Password: The password you are expecting in the soap header
Now go back to your service configuration -> Policy -> select the policy that you have added.
there you can see the properties button enabled.click on it...
there for the default_value = basic_credentials give the over_ride value as Sample_KEY (the key name you have mapped to the map)
Regards,
Chandra sekhar kommalapati

Combine response of two business services in OSB

Scenario:
I have a proxy service which ahs two business service call outs depending on the system name passed to it(e.g. 'ABC', 'XYZ')
1. If the request contains 'SysName' = 'ABC', service related to 'ABC' gets called. The response is generated. (This is working.)
2. If the request contains 'SysName' = 'XYZ', service related to 'XYZ' gets called. The response is generated. (This is working.)
3. If the request contains 'SysName' = 'ALL', both the services related to 'ABC' and 'XYZ' systems should get call. The generated reponse should contains response of both the services.
Please note that, the XSDs for reqeust/response of both 'ABC' and 'XYZ' services are same.
Could you guide on steps to combine response of two business services?
Thanks-
Sachin

Hi Sachin ,
Yes u can can combine any number of service responses by using service callouts in separate/indivisual stages as it would be better to debug and trace the message flow.
U can give explicitly user defined response variable names for the service callouts action and used them in ur pipeline (eg.response pipeline)where ever u want.
U can create an xml structure like this where u r variables $responsebody_1.responsebody_2 are those which u hv defined while configuring the service callout action against the SOAP Response Body/Response Document Variable what ever u r using for calling BS
<body>
<response_1>{$responsebody_1}<response_1>
<response_2>{$responsebody_2}<response_2>
</body>
and in the end use replace actionin the last stage of response pipeline to replace the entire body/node contents with the above mentioned xml structure to combiine both responses from BS
Regards ,
Abhinav

Having problem in passing the values in business service in OSB.

hi ,
in my requirement i have to write a string in AQ , i have created a AQ adapter and a business service related to that now i have a variable which contains the string i have to pass, how i can paas this variable in my business service using service callout or publish ??
Edited by: 990437 on Mar 6, 2013 1:36 AM

I checked the Business Service using the test console . It worked fine .
There is no listener on the AQ . The test messages and the messages sent using the service callout are still there.
I have logged the body variable and I can see its fine.
The thing is Service Callout works but at the end throws an error :
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884743> <BEA-000000> <Started Payload Translation...>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884744> <BEA-000000> <End of Payload Translation...>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884744> <BEA-000000> <Extracting Header Properties from XMLRecord...>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884744> <BEA-000000> <No recipients specified...>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884746> <BEA-000000> <Successfully completed outbound interaction to queue - JOB_QUEUE>
<[ACTIVE]ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884750> <BEA-000000> <Closing Interaction...>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884750> <BEA-000000> <Closing Interaction...>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-01FF0221C1FA5B53DDE4> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884751> <BEA-380003> <Exception on TransportManagerImpl.sendMessageAsync: unchecked exception:, java.lang.NullPointerException
java.lang.NullPointerException
at com.bea.wli.sb.transports.jca.codec.JCAAbstractMessage.getPart(JCAAbstractMessage.java:75)
at com.bea.wli.sb.transports.jca.codec.JCAAbstractMessage.getPart(JCAAbstractMessage.java:31)
at com.bea.alsb.ws.codec.internal.runtime.soap.SoapDocCodec.marshallBody(SoapDocCodec.java:67)
at com.bea.alsb.ws.codec.internal.runtime.soap.SoapCodec.marshall(SoapCodec.java:192)
at com.bea.alsb.ws.codec.internal.runtime.soap.SoapDocClientCodec.marshall(SoapDocClientCodec.java:58)
at com.bea.wli.sb.transports.jca.codec.JCAClientCodec.createResponse(JCAClientCodec.java:57)
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:168)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:574)
at sun.reflect.GeneratedMethodAccessor563.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)......................................
On the other hand the Publish Action with either QoS mode does nothing . No exception , No messages in the AQ . It does not do anything at all.

Regarding JMS-Queue/Topic in Proxy and Business service in OSB

Hi
I have one query regarding to the JMS-Queue/Topic.
I am published the message to the JMS-Queue/Topic.
----My Business-service configuration is---
General----Any xml
Tranport--jms://localhost:7001/MyConnectionFactory/RequestQueue
Response--None
I call this Business-service in proxy-service of Routing message was published successfully to thee Queue.
I try to dequeue the message from that queue for this
--- I take another proxy with---
General----Any xml
Tranport--jms://localhost:7001/MyConnectionFactory/RequestQueue
In meassage flow
Routing--second busines-service)
--- Second business-service configuration is---
General----Any xml
Tranport-File (C://temp)
Issue is when I publish the message to Queue,the message is also found in the file i.e C:temp. I don't now why this come to the file.*
Any suggestions
Thanks
Mani

Either I did not get an idea, but in your JMS proxy you are routing to File :)
If you don't want file, why route to 2nd BS ?

Sign Body with a concrete certificate on Business Service in OSB

Similar Messages

Maybe you are looking for