Sign change in report
Hi
In a report I have a key figure (Total spend) Amount, my requirement is irrespective of the sign (+ve /-ve) of the value, I want to display all the vales as +ve. How can I achieve this? Please advice.
Thanks a lot
Sheetal
In The querythe field(Total spend) i have +ve as well as - ve sign values .In the Query i went to Total spent key figure properties and selected the check box for reverse +,- sign all the values got reversed, like + ve became -ne and -ve became +ve but my requirement is I want all values to be positive or all negative. Please advice how to go about this
Thanks a lot
Sheetal
Hi Sheetal,
You can remove the sign either positive or negative in query properties. Or else if you want to show one sign either negative or positive then you have to write a Macro to chenge the sign of +ve to -ve or vice versa, and activate it before running the query.
Hope it helps,
Sunil.
Similar Messages
-
+/- Sign Change (Transact FSE2 or OB58)_Change Financial Statement Version
Hi,
In transaction FSE2 there is a buttom +/- "Sign Change", but if I mark or not, nothing differente happens.
I need to display total of Assets with value negative (for example)
Someone can help me?
Tks.
SoraiaFinally, it is not posible to change the sign in FSV for S_ARL_87012284 report, but note 1842450 - Financial statement version +/- sign change in S_ARL_87012284 , proposes use the corresponding drill down reporting tool ( (e.g. in classic G/L: S_ALR_87012249, in new G/L: S_PL0_86000028).
The change sign flag takes effect on these reports. -
Hi Folks,
I have a problem in reporting.
We are getting a data from flat file and loaded in to ICELIM cube and later that will pull into Managerial Consolidation Cube.
P99T is account member and its ACCTYPE is EXP and its a parent member.
We created a one report based on ICELIM cube its showing negative values for the member P99T. Created another report based on Managerial Consolidation Cube, Here the same member showing Positive values.
Can any one please let me know what is the problem is?
I need Positive values in Both reports.
Regards,
G. Saida ReddyHi vadim,
Thank you for you response,
Recently I take over this project, Previously one guy is handled all those things.
But if "Descendants of P99T is Applicant count=EXP(ACCTYPE), FT=EXP(ACCTYPE), Applicant Rate= EXP(ACCTYPE)" then P99T is meaningless - how can you aggregate count, FT and rate????
Can you please let me know the what is the exact point your are saying from above.
we have positive signs for base members of ICELIM and Managerial Consolidation.
Now it is not possible to change moving data from ICELIM to Managerial Consolidation.
can you please let me now the issue for sign in the report?
Regards,
G. Saida Reddy -
Change the Report Title for XML Publisher, depending on the field value.
I want to change the Report Title as below.
if the field_A='B' then the report title as it is defined in report defination
else the report title is 'XXX"
Please let me know whether it is possible, if yes please guide me. how can we do it.
Thanks
VenkatTim covered the inline if statement, though not specifically regarding a title, in his blog recently:
http://blogs.oracle.com/xmlpublisher/2007/12/18#a723
The syntax is:
xdoxslt:ifelse(.//WM_FLAG='C’,'Canceled','Approved') -
How to change a report in Manager's Desktop?
Hi all,
i want to change a report in the Manager's Desktop Compensation Management.
Report name: Cost Center
You can see it under this link: [www.starbulls-fotos.de/1.jpg]
When i now run the report i can see the report, but with no selection screen. I only get a finished report with fixed selection parameters
You can see it under this link: [www.starbulls-fotos.de/2.jpg]
How can i change this selection parameters?
In this example i want to change the "Cost Element Group" to an other value.
When i run this report outside of the Manager's Desktop with the transaction code "S_ALR_87013611" i get the selection screen needed and can change the parameters.
It would be great if anyone could help me!
TIA!
strobbelHi Strobbel,
Execute your report via the transaction. Check the selection variants on that first selection screen. You will see the default one that came up for you and others that may have been created to default for Managers' Desktop. You can select the one that is appearing with the incorrect cost element group and change it to the correct one. Save the changed selection screen. We also have a transaction ZZBCVARIANT that can be used to change the selection screen variants.
Also, remember, the manager in Managers' Desktop may be limited due to authorizations to see data from only certain cost centers (his own).
Paul -
Format change when report open in report expert
Hi all,
I am using report builder 6i and I create invoice report I have attached it with oracle ebs 11i and run it from
concurrent manager. Now I have to open my invoice report into report expert software.
when it opens into report experts, It change our report builder fonts and format both.
suppose if item are 1 then invoice total depens upon number of items. so invoice total position is changed
according to the number of items. If 1 items total move up and if more than 1 item total moves down.
In this way my invoice format become changed and total did not maintain in same position.
ThanksThe Format is changed due to sizes of Repeating frames in the report layout as well as the fixed frames.
you can use the border color of the frames to design the report layout.
when your fixed frame is not in lined with the repeating frame objects and the anchor is not applied then the report output in PDF will not be disturbed
while in the Excel format it will be as per the no. of fixed frames/objects in the first line will come in first A1 column of the Excel file ans next in the second and so on... -
Change log report S_AHR_61016380 not picking IT0025
Hi Experts,
I need the change log report to capture the details of changes made in IT0025 (Appraisals).
I have made necessary configurations to the below tables by watching in other SDN threads, but still my problem is not solved.
Also made changes to master data (IT0025) and tested, but still no use.
Log report is not picking changes made to IT0025.
Please suggest
Thanks
VenkateshDear Expert,
for logged changes in infotype report we need to install crystal report.
please suggest. -
Unable to Change Main Report Page Orientation in Crystal 10
Hi,
My report has 8 sub reports and every sub report is placed in a report footer section. When I change the page orientation from portrait to landscape, no change in main report. but It does change the sub report paper orientation.
Is it because of the sub reports?
Any Ideas?
Thanks in Advance,
JyothiThanks for the reply.
But I was changing whole report to landscape. When I select Default margins, Main report changed to Landscape, earlier adjust aumomatically option was selected in Page setup dialog.That solved my problem. -
Question on changing the report template to display the images
I am trying to change the report template so that each table cell will display an image and a checkbox for the image. The column templatet for the new report template is like this:
<td #ALIGNMENT# headers="#COLUMN_HEADER#" class="t17data">
<table>
<tr height="90%"><td>
<img src= "&F101_GET_THUMB.#COLUMN_VALUE#" onmouseover="return onmouseover_img('#COLUMN_VALUE#');">
</td></tr>
<tr height="10%"><td align="center" valign="bottom">
<input type="checkbox" name="f01" value="#COLUMN_VALUE#"/>
</td></tr>
</table>
</td>
My questions are:
1. If the #COLUMN_VALUE# is null, the table cell will display a broken image icon and a checkbox. How could I avoid this? I could add condition to this template, such as when #COLUMN_VALUE# is not null, but how to refer to the value of #COLUMN_VALUE# in pl/sql?
2. I want to always put the checkbox at the center bottom, but no matter what I set "align='center' valign='bottom', it is always close to the image. Since the image sizes are different, the appearance of the checkbox are just up and down. How to fix this?
Thanks,
Fengtinghello,
at designtime the elements from the template are physically
imported into the report. the only way of re-applying a template
is to use the wizard, which will re-default the layout.
regards,
the oracle reports team --pw -
LMS 4.2 Change Audit Report
Hi,
The audit/compliance department at one of costumer wants to see the weekly config change audit report.
I have done many test with this feature and i found two problems:
1. The given report path is empty. Only the directories was made and there are not report files.
2. I can not send the report in attachment. How can i publish it automatically? Many reports have attachment option. It has not.
The immediately option is working but it does not make report. ( like .pdf )
How can i send audit change report autmatically to external costumer?
Regards,Hi,
Sorry for late answer!
I did not config report path, i use the default path! ( i have tried another path setting also )
The screens show the following.
1, job info
2. job report view
If i use the immediatly options the report is good! Only the scheduled job does not make report!
Regards, -
Hi Everyone,
If I just made a new automated action profile under Tools>Change audit and generate a 24 hour change audit report, will it immediately reflect any changes done in the configuration.
Thanks.The automated actions will take effect immediately and will be triggered based on matching criteria you have defined in the rules and the syslog received from the devices.
Ensure that the Automated Action is enabled for it to take effect:
Select Resource Manager Essentials > Tools > Syslog > Automated Actions, then select action and enable. -
User change log report in Console
Dear Experts,
We have one audit requirement. We need u2018change logu2019 for useru2019s role modification.
I checked in console logs. I found the log for delete user & modify user. In case of delete user it is giving details which are the users had been deleted. But in case of role modify in user, it is not giving which are the users had been modified or which newly role had been assign.
We need change log report from MDM console.
Regards,
GaurangHi Gaurang,
<repositoryAdmin><role action="modify" id="2"><functionRight>
<function>16777216</function><access>1</access>
</functionRight></role></repositoryAdmin>
In this case the role with ID 2 has been modified. The authorization with ID 16777216 (see function ID map below) has been set to 1 (Execute).
Below this section there is one table with function ID and Description.
Here in case of change in functions Tab
<access>X</access> will tell u if the function is set to Execute or None:
Legends:
Execute:1
None:0
and which function u will get from <function>16777216</function>
For decoding the function id there is a table given in section 4.2
and if there is any change in the table and fields tab:
then log will be as follows:
<repositoryAdmin><role action="modify" id="5"><objectRight> <object>1</object><type>0</type><access>2</access>
</objectRight></role></repositoryAdmin>
where access will tell u if its Read Write(3) or Read Only(2)
Which table u will get from <object>ID</object>
Now this role ID and Table ID is the Index values which u can get using API.
Try to write an api which will extract the Table ID ,Field ID and Role ID information in an Excel this u can use as reference the decode the Log.
Regards,
Neethu Joy -
Column name changed in reports
I have to do some changes on my existing report, its really a complex report with more number of columns and tables. now its really hard to fix the alias name changed by report builder automatically. any one could help me to fix this problem, means what i have alias name in query that i want to use in report.
Hi,
Could you pl clarify the Q? Do you mean that Reports Buider has automatically added an alias to a column name? This is not expected.
Or do you mean that you need to change the alias of the column without disturbing the report definition? You can alter the data model of the report using the feature "Customization at runtime using XML". For more information, refer to Chapter 16 in Publishing Reports Manual for 10g:
http://www.oracle.com/technology/documentation/reports.html
Navneet. -
Change CO report currency to USD (grr2)
I have a CO report done with GRR2 transaction with EUR as currency.Iwould like to change it in USD currency.
what i can do.Hi,
Check if below fields are active in your library:
SWZG - Costs in Target Currency
SWKG - Costs in reporting currency
Target currency will be used by the system as the translation basis.
Make sure, you have USD/EUR exchange rates are maintained in your system.
So, change your report to include these key fields. As a result of using SWZG, the translation section will appear at the bottom of your selection screen.
Hope this helps. -
Changes History Report in Fire Fighter
Hi,
We have assigned FF ID to end user. By using that FF ID,user did some changes.
Ex: End user has used SU01 transaction and he has assigned SAP_ALL to his own id and some other users via FF ID.
When we checked the Log Reports in FF 5.3, we are able to the see only transaction details which he has used. But we are unable to find the changes which he has done by using SU01.
Please check and advice me how me can get that change history report in Fire Fighter.
Thanks & Regards,
KKRao.Hi Harleen,
Retrieve Change Log option is already set as YES. But we are unable to get Changes History Report.
Please advice to me.
Thanks & Regards,
KKRao
Maybe you are looking for
-
Got the new Iphone 5c from Verizon today and was really happy with the phone until we realized it is unable to send or recieve text messages AT ALL. We've tried everything, searched the internet for hours, I've tried live chatting with Verizon and Ap
-
I have just upgraded from Windows XP to Windows 7 and then reinstalled CS4 (purchased a couple of years back and paid for) then input the unique code number. Now I get an error msg that says "Licencing has stopped working". What do I need to do?
-
DropDown in Online Interactive Forms Not working.
HI: I am working on Online Interactive Form for Purchase Requisition. I have a dropdown in the dynamic table and I am trying to populate the same in DoInit(). I am using the following code. But the drop down is displayed empty. DATA: lr_node_info typ
-
Hi all, I'm hoping to distribute a Java application I have written on CD but the majority of the people I will be giving it to won't have the Java Runtime Environment. Is it possible to burn the JRE onto a CD along with my class files so the user can
-
I accidentally defined a cross validation rule (CVR) wrongly. My intention was to ensure that cost centre values other than 999 couldnt be combined with balance sheet accounts. It appears to work initially, except that it prevents me from posting to