# sign displayed in report
Hi,
In one of our report, # sign displayed in the plant column(not for all plants) for the selection only for material batch list 714.
I just checked in MB51 to find out the plant, but I can see only the plants which are assigned(around 7 plants). So how can I check the proper plant in R/3 and how to ensure the proper plant is coming through.
Please give me the solution
Regards
dyuthi
Hi,
I checked in the data target with the material and batch and I got the results with all the plants available in R/3 assigned to those materials and batch. And in the data target, I got two records in which no plant is displaying. So thats why in my report # sign is displayed if I am correct.
Why the plant doesnt contain the data. What is the reason behind this and how can I displayed the report correctly with the plant.
Regards
dyuthi
Similar Messages
-
Negative sign display for CURR field in ALV grid report
I have a field BETRG defined as CURR field of length 15, decimal places 2. The value may be negative or positive. In case of negative values I am using EDIT_MSK option in the field catalog to bring the negative sign to the left of the value as shown below.
Quote
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_internal_tabname = 'LT_FINAL'
i_inclname = sy-repid
CHANGING
ct_fieldcat = fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
LOOP AT fieldcat.
CASE fieldcat-fieldname.
WHEN 'BETRG'.
fieldcat-ctabname = ' '.
fieldcat-cfieldname = ' '.
fieldcat-edit_mask = 'RRV_______________.__'.
ENDCASE.
MODIFY fieldcat.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_buffer_active = 'X'
i_callback_program = sy-repid
i_grid_title = 'ABCD'
is_layout = gs_layout
it_fieldcat = fieldcat[]
i_save = 'A'
is_variant = gs_save
it_events = gs_events
TABLES
t_outtab = lt_final
EXCEPTIONS
program_error = 1
OTHERS = 2.
Unquote
On displaying the report using 'REUSE_ALV_GRID_DISPLAY' as shown above, when the value of BETRG is a smaller number like say 624, then the ALV output appears as '- 624.00' instead of '-624.00'.
Is there any way that I can remove the space in between the negative sign and the number before displaying the ALV output using 'REUSE_ALV_GRID_DISPLAY'?Hi Deepak,
I tried this and found that this doesn't work in case of currency field. Once you move back the char field (with negative sign to the left and condensed) to the currency field, the negative sign again moves back to the right.
I think that the only way a negative sign can be brought to the left of the currenct field is by using edit_mask of field catalog as I have shown above.
Regards,
Shayeree. -
Can not display BI report in Web ui
I created reporting profile with both bi and interactive reporting active and assigned to the business role functional profile
I gave the BI connection client in the report that I wanted. When I select the report in webu ui, it's taking me to a sign on pad. I assume this for BI sign on pad and When i enter sign on, it's not taking me any where.
This just a standard report in CRM My top 5 quotations. All necessary steps in basic bi connection, basic sales analytics are done too
How does the the connection between BI and crm works?
Please adviseHi Experts,
We are using Webiu 2007 with BI 7.
We linked our sandbox to RWT system to test the report output. In my CRS, I have source system RWT defined and the same way in BI also we have assigned CRS to link these systems together. It is my understanding that when we select the report, we are just calling the from BI into CRM. I have done the following steps in CRM
1) Created reporting profile in CRM analytics as both BI and CRM interactive reporting activated
2) Assigned this reporting profile to business role
3) I selected My-Top-5 quotation report and gave the BI system in display bi reports
4) I can see the report on webui.
Problem: When I selected the report, a logon pad appears and I enter RWT user id and password, it's doing nothing. But, I have another user who is logging in for the first time got an error "Error loading template "OTPLB_OCRM_QUTO_Q0001_1 notification number BRAIN276". When the same new user tried to login second or third time, it's not showing the error and nothing is happening when we enter userid and pass word. But, we can logon to GUI RWT.
We tried to pull a query view report and web template reports see if we can display data. The BI team gave me couple of info objects keys.
1) I created the report with object key and type as one for 3.x template and one for 3.x query view
2) Created logical links for these two reports and selected these two reports in business role. Now the reports are showing in webui
3) When I select any of these, it taking to a blank screen without any logon screen.
BW team says that these reports are running with data in their system.
Can someone please help? -
Removing # sign in the Report for Blank Value
Guys,
I was trying to use the below code VB, but i am getting error like Expected: End of statement.
I am new to VB, do anyone have step by step guide to implement the below macro for Excel and remove the # from BEx analyzer.
Do i need write this macro for each query? I totally dont understand the link.
Kindly guide to run the macro and avoid # in reporting.
Do I need to implement this macro on each end user client server ?
Removing '#' in Analyzer (Report)
In ODS, there are records having a value BLANK/EMPTY for some of the fields. EX: Field: `Creation Date' and there is no value for some of the records.
For the same, when I execute the query in Analyzer, the value `#' is displaying in place of `BLANK' value for DATE and other Characteristic fields. Here, I want to show it as `BLANK/SPACE' instead of `#'. How to do this?
I had a similar problem and our client didn't want to see # signs in the report. And this is what I did. I created a marco in Workbook as SAPBEXonRefresh and run my code in Visual Basic editor. You can run same code in query also as when you will refresh query this # sign will be taken care. You can see similar code in SAP market place.
I will still suggest not to take out # sign as this represent no value in DataMart. And this is SAP standard. I did convince my client for this and later they were OK with it.
The codes are below:
Sub SAPBEXonRefresh(queryID As String, resultArea As Range)
If queryID = "SAPBEXq0001" Then
resultArea.Select
'Remove '#'
Selection.Cells.Replace What:="#", Replacement:="", LookAt:=xlWhole, _ SearchOrder:=xlByRows, MatchCase:=False, MatchByte:=True
'Remove 'Not assigned'
Selection.Cells.Replace What:="Not assigned", Replacement:="", LookAt:=xlWhole, _ SearchOrder:=xlByRows, MatchCase:=False, MatchByte:=True
End If
' Set focus back to top of results
resultArea(1, 1).Select
End Sub
Regards,
Anand
Edited by: araj123 on Oct 19, 2010 4:51 PM
Edited by: araj123 on Oct 19, 2010 4:58 PMAnand,
This is what I have used in the past and works just fine
Sub HashRemoval()
Application.ScreenUpdating = False
Cells.Replace What:="#", Replacement:="", LookAt:=xlWhole, SearchOrder:= _
xlByRows, MatchCase:=False, SearchFormat:=False, ReplaceFormat:=False
Application.ScreenUpdating = True
End Sub
But I have this as a separate macro that can be called any time.
Cheers
Craig -
Budget is not getting displayed in Report S_ALR_87013558
Hi Friends,
For project the budget is not getting displayed in Report S_ALR_87013558 though the budget is planned by TCode: CJ30 and released also by TCode: CJ32
Is there any setting in customising in information systems to display in the report.
Please treat this as quite urgent.
Regards,
Manohar NHi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva -
Complete data not displayed in Report
Hi forum,
I have a cube based on data source 0FI_AR_4,which is updated via an ODS.I have created a query for ageging analysis.The query uses Referrence number ( invoice number) to display the receivables of various customers and number of days from due date.
To my surprise many invoice numbers are not being displayed in the query, but when i restrict the query to the invoice numbers which are not being displayed the report generated is able to display all the doccuments.
I have checked the data in the cube and all the invoice numbers are flowing well fro R/3.
My only way of saying thanks to the people who solve the issue or provide helpful answers is by assigining points.
Regds
Suhelhello
This is simple problem
The result the query fetches is not able to display in the number of cells provided in the excel sheet
So when you restrict the data, the query is able to show all the data fetched by accomadating in the columns available in the excel.
Here in your case , there are not enough columns in the excel sheet to display all data
Regards
N Ganesh -
Text data is not displaying at Report level for an Infoobject Item name
Hi All,
Texts data is maintained at Info object level but text information is not displaying at Report level for an object. I have set the property at query level as "Text", but at report level it is displaying key values of the object, not displaying texts information. This problem occured in QA(Quality) system but not replicated in Production system. I have checked all properties at backend and query level and compared the same between QA and Production system didn't find any difference.
Please suggest what might be the cause: at report level it is displaying key values instead of the textual information even text data is mainintained at backend. In production it is displaying textal data for the IO.
Thanks in advance.Hi All,
Thanks for your valuable information. I have changed the setting under Advanced tab as "Master data" for Access type for results values, but didn't solved the problem still it showing key information for the IO.
In Production system the report displaying texts information for the IO, but in QA its displaying key information. The problem exits only in QA, its working fine in DEv and Production.
As per my understanding might be the issue with Patches will be checking with Basis team on the same.
Please suggest if you have any alternatives to fix the issue. -
I need to display a Report which contain -- del QTY and INV QTY in one
Hi ALL,
I need to display a Report which contain
<b>Customer , Material , Order No, Delivery No, Billing No , Order Qty , Dev Qty, Bill Qty , Invoiced Qty and There Values in One Line .</b>
How can I Display, When I am executing the report against the Delivery Number Bill Qty and Invoiced Qty is showing Hash ( # ).
Do I need to right any Routines for this, if I am correct, where I have to write that code and what is the code ,
What are the Consolidation routines ?????
I am working on BI 7.
Regards ,
Shaik
Message was edited by:
shaikFrst check in backend, which all cubes have got data for each of three..
Corresponding you can go ahead with Multi/Infoset..
Look for reference no in all three cubes and pick one order and track tht by reference no in all cubes,
Hope it helps..
Thanks for points assigned -
Report 6i/Webdb -Not able to display the report in the browser - rep- 3002 error.
Would someone tell what I missed, I have set up the following:
1) a report using report builder on NT
2) my database is in Unix
3) my report server is started in NT
4) I run webdb listener for the following code: http://myweb.com/cgi/rwcgi60.exe?server=repserver+report=myreport+userid=usid/pw/connect_string+destype=cache+desformat=html. Then, I receive this message:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job has terminated with error.
Reports Server Replies:
REP-3002: Error initializing printer. Please make sure a printer is installed.
Why is it thinking I want to use the printer whereas I want to display the report in the browser?. Any help would be appreciated.
nullIt sounds like that your Web CGI did not configure right. To test if your CGI configuration is correct, type:
http://hostname:port/cgi-bin/rwcgi60exe?
If you get a help screen, then you should be able to bring up your report.
Regards,
Xiaoling -
Field symbol has not yet been defined-ALV Grid Display in Report
Hi all,
Iam calling a Function module for ALV grid display in Report programming. Its throwing the Error message Field Symbol has not yet defined. Can any one suggest what i have to do regarding it?Hi,
<li> This is problem with fieldcatalog.
<li> Check field names or table name in small letters in quotes while building fieldcatalog internal table
<li> Check the fieldcatalog internal table , whether it has same fields as in data table which is shown using GRID_DISPLAY function module.
Thanks
Venkat.O -
Display of report in excel format.
Hi,
How to display a report in excel format?? I have the display details in an internal table.
Is it possible for the output to come in excel format as soon as we run the pgm other.than downloading from list or grid format..If so how to do it??Kindly help..
Thanks..Hi,
Once you have all the data in the internal table, just use function module 'Download' or 'WS_Download' and pass the parameters in function module like the below for example.
if not i_list[] is initial. " i_list is an internal table
call function 'WS_DOWNLOAD'
exporting
filename = filename1
filetype = 'DAT'
tables
data_tab = i_list
fieldnames = i_header "i _header has the field names
exceptions
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
endif.
Now, the excel will be created which has all the data.
Hope this helps.
Thanks,
Srinivasa -
Display Oracle Report on new window
Hi,
How can I display Oracle report from HTML DB on a new browser window? I have branch to this report. Thanks much for your help.
LakshmiSearch this forum for "new window". You should find it. Try:
checkbox and report page in new window -
Display @ interactive Report
Hello All,
In my interactive Report, there is couple column in the “Do Not Display Column”.
I would like to display them as other default column.
Anyone can lead me about this issue ?
EB NYHi,
Login to the application, and run the report as developer account. After running the page, click on interactive report Action menu --> select columns. Select the columns which you want to display in report and move them to Display in Report list box, arrange the order of the columns as per your requirement. Now Click on Apply. Now you should be able to see the new columns on the report page.
To make this report setting available for all the users, you have to save this layout as default report setting. To do that, click on Action menu -> Save report . Select default report setting and then click on apply. This will save the current report as default report for all the users and they can see the newly added columns.
Hope this helps.
Regards,
Manish -
How to display a report in tree format
hai can any one send me the code to display the report in a tree format
if i take example of customer numbers as tree branches and if i click each customer number the tree should expand showing all sales orders for a customer
ragrds
afzaluse FM HR_ALV_HIERSEQ_LIST_DISPLAY
there are 2 internal table , one for header and one for detail
below is code for reference
REPORT zinsd_quot_cont.
TYPES : BEGIN OF ty_vbak,
vbeln TYPE vbeln_va,
vkorg TYPE vkorg,
vtweg TYPE vtweg,
spart TYPE spart,
vkbur TYPE vkbur,
vkgrp TYPE vkgrp,
angdt TYPE angdt_v,
bnddt TYPE bnddt,
kunnr TYPE kunnr,
kwmeng TYPE kwmeng,
meins TYPE meins,
kunwe TYPE kunnr,
name1 TYPE name1_gp ,
name2 TYPE name1_gp ,
sel(1),
expand(1),
salesdocument TYPE bapivbeln-vbeln,
message TYPE bapi_msg,
END OF ty_vbak.
DATA : w_vbak TYPE ty_vbak,
t_vbak TYPE TABLE OF ty_vbak.
DATA : w_update TYPE ty_vbak,
t_update TYPE TABLE OF ty_vbak.
TYPES : BEGIN OF ty_kna1,
kunnr TYPE kunnr,
name1 TYPE name1_gp ,
END OF ty_kna1.
DATA : w_kna1 TYPE ty_kna1,
t_kna1 TYPE TABLE OF ty_kna1.
TYPES : BEGIN OF ty_vbap,
vbeln TYPE vbeln_va,
posnr TYPE posnr_va,
matnr TYPE matnr,
matkl TYPE matkl,
werks TYPE werks_ext,
kwmeng TYPE kwmeng,
meins TYPE meins,
mvgr5 TYPE mvgr5,
maktx TYPE maktx,
END OF ty_vbap.
DATA : w_vbap TYPE ty_vbap,
t_vbap TYPE TABLE OF ty_vbap.
TYPES : BEGIN OF ty_makt,
matnr TYPE matnr,
maktx TYPE maktx,
END OF ty_makt.
DATA : w_makt TYPE ty_makt,
t_makt TYPE TABLE OF ty_makt.
TYPES : BEGIN OF ty_sum,
vbeln TYPE vbeln_va,
kwmeng TYPE kwmeng,
END OF ty_sum.
DATA : w_sum TYPE ty_sum,
t_sum TYPE TABLE OF ty_sum.
TYPES : BEGIN OF ty_vbpa,
vbeln TYPE vbeln,
posnr TYPE posnr,
parvw TYPE parvw,
kunnr TYPE kunnr,
END OF ty_vbpa.
DATA : w_vbpa TYPE ty_vbpa,
t_vbpa TYPE TABLE OF ty_vbpa.
TYPES : BEGIN OF ty_vbup,
vbeln TYPE vbeln,
posnr TYPE posnr ,
gbsta TYPE gbsta ,
END OF ty_vbup.
DATA : w_vbup TYPE ty_vbup,
t_vbup TYPE TABLE OF ty_vbup.
TYPE-POOLS slis.
DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv,
w_fieldcatalog TYPE slis_fieldcat_alv,
w_layout TYPE slis_layout_alv,
gs_keyinfo TYPE slis_keyinfo_alv.
DATA: g_tabname_header TYPE slis_tabname,
g_tabname_item TYPE slis_tabname.
data definition
Batchinputdata of single transaction
DATA: bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
messages of call transaction
DATA: messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
DATA : g_lines TYPE i.
*Selection Screen
TABLES : vbak,vbap.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS s_vkorg FOR vbak-vkorg. " Sales Org
SELECT-OPTIONS s_vtweg FOR vbak-vtweg. " Dist Channel
SELECT-OPTIONS s_spart FOR vbak-spart. " Division
SELECT-OPTIONS s_vkbur FOR vbak-vkbur. " Sales Off
SELECT-OPTIONS s_vkgrp FOR vbak-vkgrp. " Sales Grp
SELECT-OPTIONS s_matkl FOR vbap-matkl. " Mat Grp
SELECT-OPTIONS s_werks FOR vbap-werks. " Plant
SELECT-OPTIONS s_period FOR vbak-angdt. " Sales Off
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
PERFORM f_getdata.
PERFORM f_initdata.
END-OF-SELECTION.
PERFORM f_createalv.
PERFORM f_dispalv.
*& Form f_getdata
text
--> p1 text
<-- p2 text
FORM f_getdata .
*Sales Header
SELECT
vbeln
vkorg
vtweg
spart
vkbur
vkgrp
angdt
bnddt
kunnr
INTO TABLE t_vbak
FROM vbak
WHERE
vkorg IN s_vkorg " Sales Org
AND vtweg IN s_vtweg " Dist Channel
AND spart IN s_spart " Division
AND vkbur IN s_vkbur " Sales Off
AND vkgrp IN s_vkgrp " Sales Grp
AND angdt IN s_period
AND bnddt IN s_period
AND auart = 'ZQMO'
AND vbtyp = 'B'.
*CUST NAME
SELECT
kunnr
name1
INTO TABLE t_kna1
FROM kna1
FOR ALL ENTRIES IN t_vbak
WHERE
kunnr = t_vbak-kunnr
*Sales Item
SELECT
vbeln
posnr
matnr
matkl
werks
kwmeng
meins
mvgr5
INTO TABLE t_vbap
FROM vbap
FOR ALL ENTRIES IN t_vbak
WHERE
vbeln = t_vbak-vbeln
AND matkl IN s_matkl " Mat Grp
AND werks IN s_werks " Plant
*Partners
SELECT
vbeln
posnr
parvw
kunnr
INTO TABLE t_vbpa
FROM vbpa
FOR ALL ENTRIES IN t_vbak
WHERE
vbeln = t_vbak-vbeln.
IF t_vbpa[] IS NOT INITIAL.
SELECT
kunnr
name1
APPENDING TABLE t_kna1
FROM kna1
FOR ALL ENTRIES IN t_vbpa
WHERE
kunnr = t_vbpa-kunnr
ENDIF.
*Status - Sales Doc
SELECT
vbeln
posnr
gbsta
INTO TABLE t_vbup
FROM vbup
FOR ALL ENTRIES IN t_vbap
WHERE
vbeln = t_vbap-vbeln
AND posnr = t_vbap-posnr
AND gbsta NE 'C'.
SELECT
matnr
maktx
INTO TABLE t_makt
FROM makt
FOR ALL ENTRIES IN t_vbap
WHERE
matnr = t_vbap-matnr
AND spras = 'E'.
ENDFORM. " f_getdata
*& Form f_initdata
text
--> p1 text
<-- p2 text
FORM f_initdata .
SORT t_vbap BY vbeln DESCENDING.
*delete all closed stat items
LOOP AT t_vbap INTO w_vbap.
READ TABLE t_vbup INTO w_vbup
WITH KEY
vbeln = w_vbap-vbeln
posnr = w_vbap-posnr.
IF sy-subrc <> 0.
DELETE t_vbap.
CONTINUE.
ELSE.
READ TABLE t_makt INTO w_makt
WITH
KEY matnr = w_vbap-matnr.
IF sy-subrc = 0.
w_vbap-maktx = w_makt-maktx.
MODIFY t_vbap FROM w_vbap.
ENDIF.
ENDIF.
ENDLOOP.
*find the total quantity
LOOP AT t_vbap INTO w_vbap.
w_sum-vbeln = w_vbap-vbeln.
w_sum-kwmeng = w_vbap-kwmeng.
COLLECT w_sum INTO t_sum.
CLEAR w_sum.
ENDLOOP.
*populate header
LOOP AT t_vbak INTO w_vbak.
Quantity - Total
READ TABLE t_sum INTO w_sum
WITH KEY
vbeln = w_vbak-vbeln.
IF sy-subrc = 0.
w_vbak-kwmeng = w_sum-kwmeng.
ELSE.
CLEAR w_vbak-kwmeng.
ENDIF.
UoM
READ TABLE t_vbap INTO w_vbap
WITH KEY
vbeln = w_vbak-vbeln.
IF sy-subrc = 0.
w_vbak-meins = w_vbap-meins.
ELSE.
CLEAR w_vbak-meins.
ENDIF.
Partner
READ TABLE t_vbpa INTO w_vbpa
WITH KEY
vbeln = w_vbak-vbeln
parvw = 'WE'.
IF sy-subrc = 0.
w_vbak-kunwe = w_vbpa-kunnr.
ELSE.
CLEAR w_vbak-kunwe.
ENDIF.
SHIP TO PARTY NAME
READ TABLE t_kna1 INTO w_kna1
WITH KEY
kunnr = w_vbak-kunwe.
IF sy-subrc = 0.
w_vbak-name2 = w_kna1-name1.
ENDIF.
CUST NAM - SOLD TO PARTY
READ TABLE t_kna1 INTO w_kna1
WITH KEY
kunnr = w_vbak-kunnr.
IF sy-subrc = 0.
w_vbak-name1 = w_kna1-name1.
ENDIF.
MODIFY t_vbak FROM w_vbak.
ENDLOOP.
DELETE t_vbak WHERE kwmeng IS INITIAL.
SORT t_vbak BY vbeln DESCENDING.
SORT t_vbap BY vbeln DESCENDING posnr ASCENDING.
ENDFORM. " f_initdata
*& Form f_createalv
Create Field Cat.
--> p1 text
<-- p2 text
FORM f_createalv .
g_tabname_header = 't_vbak'.
g_tabname_item = 't_vbap' .
CLEAR gs_keyinfo.
gs_keyinfo-header01 = 'VBELN'.
gs_keyinfo-item01 = 'VBELN'.
*VBAK
w_fieldcatalog-fieldname = 'VBELN'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Sales Document'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'VKORG'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Sales Org'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'VTWEG'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Dist Channel'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'SPART'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Division'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'VKBUR'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Sales Office'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'VKGRP'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Sales GRP'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'KUNNR'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Sold to Party'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'NAME1'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-outputlen = 35.
w_fieldcatalog-seltext_l = 'Sold to Party Code - Name'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'KUNWE'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Ship to Party'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'NAME2'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Ship Party Code - Name'.
w_fieldcatalog-outputlen = 35.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'KWMENG'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Quantity'.
w_fieldcatalog-outputlen = 25.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MEINS'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'UoM'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'SALESDOCUMENT'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Document'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MESSAGE'.
w_fieldcatalog-tabname = 't_vbak'.
w_fieldcatalog-seltext_l = 'Log'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
*VBAP
w_fieldcatalog-fieldname = 'POSNR'.
w_fieldcatalog-tabname = 't_vbap'.
w_fieldcatalog-seltext_l = 'POS'.
w_fieldcatalog-outputlen = 6.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MATNR'.
w_fieldcatalog-tabname = 't_vbap'.
w_fieldcatalog-seltext_l = 'Material'.
w_fieldcatalog-outputlen = 18.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MAKTX'.
w_fieldcatalog-tabname = 't_vbap'.
w_fieldcatalog-seltext_l = 'Material Desc'.
w_fieldcatalog-outputlen = 40.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MATKL'.
w_fieldcatalog-tabname = 't_vbap'.
w_fieldcatalog-seltext_l = 'Material Grp'.
w_fieldcatalog-outputlen = 9.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MVGR5'.
w_fieldcatalog-tabname = 't_vbap'.
w_fieldcatalog-seltext_l = 'MCNO'.
w_fieldcatalog-outputlen = 4.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'WERKS'.
w_fieldcatalog-tabname = 't_vbap'.
w_fieldcatalog-seltext_l = 'Plant'.
w_fieldcatalog-outputlen = 91.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'KWMENG'.
w_fieldcatalog-tabname = 't_vbap'.
w_fieldcatalog-seltext_l = 'Quantity'.
w_fieldcatalog-outputlen = 25.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
w_fieldcatalog-fieldname = 'MEINS'.
w_fieldcatalog-tabname = 't_vbap'.
w_fieldcatalog-seltext_l = 'UoM'.
APPEND w_fieldcatalog TO t_fieldcatalog.
CLEAR: w_fieldcatalog.
LAYOUT
w_layout-colwidth_optimize = 'X'.
w_layout-zebra = 'X'.
w_layout-expand_fieldname = 'EXPAND'.
w_layout-box_fieldname = 'SEL'.
w_layout-box_tabname = 't_vbak'.
ENDFORM. " f_createalv
*& Form f_dispalv
Call ALV
--> p1 text
<-- p2 text
FORM f_dispalv .
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
is_layout = w_layout
it_fieldcat = t_fieldcatalog
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
i_tabname_header = g_tabname_header
i_tabname_item = g_tabname_item
is_keyinfo = gs_keyinfo
TABLES
t_outtab_header = t_vbak
t_outtab_item = t_vbap
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
ENDIF.
ENDFORM. " f_dispalv
*& Form set_pf_status
PF stat
-->RT_EXTAB text
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZINSD_QUOT_CONT_ST'.
ENDFORM. "set_pf_status
*& Form user_command
Process List UCOMM
-->R_UCOMM text
-->RS_SELFIELD text
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
REFRESH t_update.
IF r_ucomm = 'EXIT'.
LEAVE PROGRAM.
ENDIF.
IF r_ucomm = 'EXECUTE'.
LOOP AT t_vbak INTO w_update
WHERE
sel = 'X'
AND salesdocument = ' '.
APPEND w_update TO t_update.
ENDLOOP.
IF t_update[] IS NOT INITIAL.
LOOP AT t_update INTO w_update.
PERFORM f_bapi_contract_createfromdata USING w_update.
PERFORM f_bdc_contract_from_quotation.
MODIFY t_update FROM w_update.
ENDLOOP.
ELSE.
ENDIF.
PERFORM f_dispalv.
ENDIF.
IF r_ucomm = '&IC1'.
IF rs_selfield-sel_tab_field = 't_vbak-VBELN'.
SET PARAMETER ID 'AGN' FIELD rs_selfield-value.
CALL TRANSACTION 'VA23' AND SKIP FIRST SCREEN.
ENDIF.
IF rs_selfield-sel_tab_field = 't_vbak-SALESDOCUMENT' AND
rs_selfield-value NE ' '.
SET PARAMETER ID 'KTN' FIELD rs_selfield-value.
CALL TRANSACTION 'VA43' AND SKIP FIRST SCREEN.
ENDIF.
ENDIF.
ENDFORM. "user_command
*& Form F_BAPI_CONTRACT_CREATEFROMDATA
BAPI CALL
-->P_W_UPDATE text
FORM f_bapi_contract_createfromdata USING p_w_update STRUCTURE w_update .
DATA : w_contract_header_in TYPE bapisdhd1 ,
w_contract_header_inx TYPE bapisdhd1x ,
t_contract_items_in TYPE TABLE OF bapisditm WITH HEADER LINE,
t_contract_items_inx TYPE TABLE OF bapisditmx WITH HEADER LINE,
t_contract_partners TYPE TABLE OF bapiparnr WITH HEADER LINE,
t_return TYPE TABLE OF bapiret2 WITH HEADER LINE.
CLEAR : w_contract_header_in,
w_contract_header_inx.
REFRESH : t_contract_items_in,
t_contract_items_inx,
t_contract_partners,
t_return.
w_contract_header_in-doc_type = 'ZCNT'.
w_contract_header_in-sales_org = p_w_update-vkorg.
w_contract_header_in-distr_chan = p_w_update-vtweg.
w_contract_header_in-division = p_w_update-spart.
w_contract_header_in-ct_valid_f = p_w_update-angdt.
w_contract_header_in-ct_valid_t = p_w_update-bnddt.
w_contract_header_inx-doc_type = 'X'.
w_contract_header_inx-sales_org = 'X'.
w_contract_header_inx-distr_chan = 'X'.
w_contract_header_inx-division = 'X'.
w_contract_header_inx-ct_valid_f = 'X'.
w_contract_header_inx-ct_valid_t = 'X'.
LOOP AT t_vbap INTO w_vbap
WHERE
vbeln = p_w_update-vbeln.
t_contract_items_in-material = w_vbap-matnr.
t_contract_items_in-plant = w_vbap-werks.
t_contract_items_in-target_qty = w_vbap-kwmeng.
t_contract_items_in-target_qu = w_vbap-meins.
t_contract_items_in-ref_doc = w_vbap-vbeln.
t_contract_items_in-ref_doc_it = w_vbap-posnr.
t_contract_items_in-ref_doc_ca = 'B'.
t_contract_items_in-prc_group5 = w_vbap-mvgr5.
t_contract_items_inx-material = 'X'.
t_contract_items_inx-plant = 'X'.
t_contract_items_inx-target_qty = 'X'.
t_contract_items_inx-target_qu = 'X'.
t_contract_items_inx-ref_doc = 'X'.
t_contract_items_inx-ref_doc_it = 'X'.
t_contract_items_inx-ref_doc_ca = 'X'.
t_contract_items_inx-prc_group5 = 'X'.
APPEND t_contract_items_in.
APPEND t_contract_items_inx.
ENDLOOP.
LOOP AT t_vbpa INTO w_vbpa
WHERE
vbeln = p_w_update-vbeln.
AND posnr = w_vbap-posnr.
t_contract_partners-partn_role = w_vbpa-parvw.
t_contract_partners-partn_numb = w_vbpa-kunnr.
t_contract_partners-itm_number = w_vbpa-posnr.
APPEND t_contract_partners.
ENDLOOP.
CALL FUNCTION 'BAPI_CONTRACT_CREATEFROMDATA'
EXPORTING
SALESDOCUMENTIN =
contract_header_in = w_contract_header_in
contract_header_inx = w_contract_header_inx
SENDER =
BINARY_RELATIONSHIPTYPE = ' '
INT_NUMBER_ASSIGNMENT = ' '
BEHAVE_WHEN_ERROR = ' '
LOGIC_SWITCH =
TESTRUN =
CONVERT = ' '
IMPORTING
salesdocument = p_w_update-salesdocument
TABLES
return = t_return
contract_items_in = t_contract_items_in
contract_items_inx = t_contract_items_inx
contract_partners = t_contract_partners
CONTRACT_CONDITIONS_IN =
CONTRACT_CONDITIONS_INX =
CONTRACT_CFGS_REF =
CONTRACT_CFGS_INST =
CONTRACT_CFGS_PART_OF =
CONTRACT_CFGS_VALUE =
CONTRACT_CFGS_BLOB =
CONTRACT_CFGS_VK =
CONTRACT_CFGS_REFINST =
CONTRACT_DATA_IN =
CONTRACT_DATA_INX =
CONTRACT_TEXT =
CONTRACT_KEYS =
EXTENSIONIN =
PARTNERADDRESSES =
IF p_w_update-salesdocument NE ' ' .
p_w_update-message = 'SUCCESS'.
ELSE.
READ TABLE t_return INDEX 1.
p_w_update-message = t_return-message.
ENDIF.
READ TABLE t_vbak INTO w_vbak
WITH KEY
vbeln = p_w_update-vbeln.
IF sy-subrc = 0.
MODIFY t_vbak INDEX sy-tabix FROM p_w_update .
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
ENDFORM. " F_BAPI_CONTRACT_CREATEFROMDATA
*& Form f_bdc_contract_from_Quotation
BAPI CALL
-->P_W_UPDATE text
FORM f_bdc_contract_from_quotation.
DATA : l_date TYPE char10.
REFRESH : messtab, bdcdata.
CLEAR : messtab, bdcdata.
PERFORM bdc_dynpro USING 'SAPMV45A' '0101'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=COPY'.
PERFORM bdc_field USING 'VBAK-AUART'
'ZCNT'.
PERFORM bdc_dynpro USING 'SAPLV45C' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=RANG'.
PERFORM bdc_dynpro USING 'SAPLV45C' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=UEBR'.
PERFORM bdc_field USING 'LV45C-VBELN'
w_update-vbeln.
PERFORM bdc_dynpro USING 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SICH'.
IF NOT w_update-angdt IS INITIAL.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
EXPORTING
date_internal = w_update-angdt
IMPORTING
date_external = l_date
EXCEPTIONS
date_internal_is_invalid = 1
OTHERS = 2.
PERFORM bdc_field USING 'VBAK-GUEBG'
l_date.
ENDIF.
IF NOT w_update-bnddt IS INITIAL.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
EXPORTING
date_internal = w_update-bnddt
IMPORTING
date_external = l_date
EXCEPTIONS
date_internal_is_invalid = 1
OTHERS = 2.
PERFORM bdc_field USING 'VBAK-GUEEN'
l_date.
ENDIF.
CALL TRANSACTION 'VA41' USING bdcdata
MODE 'E'
UPDATE 'S'
MESSAGES INTO messtab.
break abap.
READ TABLE messtab WITH KEY msgid = 'V1'
msgnr = '311'.
IF sy-subrc EQ 0.
w_update-message = 'SUCCESS'.
w_update-salesdocument = messtab-msgv2.
ELSE.
READ TABLE messtab WITH KEY msgtyp = 'E'.
IF sy-subrc EQ 0.
DATA : l_info TYPE einfo.
CLEAR l_info.
l_info-msgid = messtab-msgid.
l_info-msgty = messtab-msgtyp.
l_info-msgno = messtab-msgnr.
l_info-msgv1 = messtab-msgv1.
l_info-msgv2 = messtab-msgv2.
l_info-msgv3 = messtab-msgv3.
l_info-msgv4 = messtab-msgv4.
CALL FUNCTION 'MESSAGE_GET_TEXT'
EXPORTING
ieinfo = l_info
ilangu = sy-langu
IMPORTING
etext = w_update-message
EXCEPTIONS
no_t100_found = 1
OTHERS = 2.
ENDIF.
ENDIF.
READ TABLE t_vbak INTO w_vbak WITH KEY vbeln = w_update-vbeln.
IF sy-subrc = 0.
MODIFY t_vbak INDEX sy-tabix FROM w_update transporting message
salesdocument.
ENDIF.
ENDFORM. " f_bdc_contract_from_Quotation
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "bdc_dynpro
Insert field *
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM. "bdc_field -
Internal error when try to display Interactive Report
Hello Gurus
I'm facing problem with displaying Interactive Reports in Web GUI (CRM 2007). When I try to open existing report or new created one, I see on the display area error "Load failed, Internal error" (no other system errors)
I think all configuration is done well, I have checked it by reports: Z_OLTP_CONFIG_CHECK and Z_OLTP_CONFIG_CHECK_BI, and except error DataSource /CRMBW/BOOL_TEXT is not active, everything is ok.
By the way - how can active this data source, while I can't find it anywhere, even in repository (RSA5)?
I thought maybe problem is with my browser or Flash player, but other functionalities uses flash work good (ie. key figures).
Any hints?
Best regards
LukaszHi Łukasz ,
the answer: CRM Interactive Reporting- "Load failed, Internal error"
Pzdr,
Mateusz
Maybe you are looking for
-
Issue in MODVAT Clearing Account and Rounding off of Excise.
I have one issue in MODVAT Clearing Account and Rounding off of Excise. Example: Material cost 100Rs. Excise value 1. BED 10.5 Rs 2. ECes 2.1 Rs 3. HEces 1.3.Rs At the time of GR Material Ac Dr 100
-
Hi Everyone, Please guide me for the following query: In the month of Jun 2010, we had received some material against a po in the legacy system. But now we want to return some of the material back to the vendor as the quality was not good (now we are
-
How does "Select Ignore Suspected Duplicates" work?
During import, if I select "Ignore Suspected Duplicates" how does LR decide if a given picture is a duplicate? The on-line help doesn' say.
-
JPA2 / Hibernate on WL 10.3.5: exception in Bean Validation
Hi all, I am deploying on Weblogic 10.3.5. Our application uses JPA 2.0 and our provider is Hibernate 4.1.7. So far this has been working for us without a problem. My problems started when I tried to add Bean Validation (JSR-303) implemented by the H
-
Hi all, How should i create an interactive report with two radio buttons?. When i clicks the radio button it should retrive the corresponding row and display that in SQL report(should be editable-with in same page)- Should i use tabular form instead