Sign in has failed. Network failure.
Hi All,
We are half way through updating an iPad issue and after rebooting because the upload was hanging in the Folio Builder we cannot log in due to network failure. Cannot sign into https://digitalpublishing.acrobat.com either under any log in.
http://status.adobedps.com/ is saying everything is fine, is anyone else having the same problem? Was working, if not a little slow, this morning but now we cannot access anything. Our internet connection seems fine and can access everything else.
Any help would be appreciated.
Thanks.
You're not alone, check http://forums.adobe.com/message/5988644#5988644
Similar Messages
-
Upload failed "network failure"
Why is it that I get upload failed "network failure" msg on folio builder, immedieatly hit retry and it goes thru, or after several trys it goes thru? Or sometimes it goes on the first try, and then I make a small change and the upload will not work again? My upload speed is 20 Mbps.
I am getting the same error message - I just updated the Folio producer tools that were released on OCT 10 for 5.5
-
Oh lordy, it's 'Sign In has failed. [svr.Unknown] again
OK, I have managed to downgrade to DPS 1.1.1 by uninstalling 1.8, re-installing InDesign 5.5 and then running the DPS 1.1.1 installer.
However, it won't let me sign in to Folio Builder. All I get is the dreaded 'Sign In has failed. [svr.Unknown]' message. I can sign in to CS services and Acrobat.com without problem using any of my Adobe IDs but Folio Builder will have none of it.
How do I get around this, again? Someone please remind me.
AliThere's no 'Downgrade' button or option, Bob. Just 'Uninstall', which appears to wipe everything DPS out of InDesign, including the original bits that are supposed to be part of InDesign 5.5. Thanks anyway.
I remembered the answer just after I posted my question: http://forums.adobe.com/thread/895566?tstart=0
It was in the forum FAQ, but I got sidetracked by the fact that the same error message appears when folio components use silly characters in filenames and folders. So again I have answered my own question. This isn't a forum, it's a psychiatrist's couch.
Ali -
ISE 1.1 - 24492 Machine authentication against AD has failed
We implement Cisco ISE 802.1X and Machine Authentication With EAP-TLS.
Authentication Summary
Logged At:
March 11,2015 7:00:13.374 AM
RADIUS Status:
RADIUS Request dropped : 24492 Machine authentication against Active Directory has failed
NAS Failure:
Username:
[email protected]
MAC/IP Address:
00:26:82:F1:E6:32
Network Device:
WLC : 192.168.1.225 :
Allowed Protocol:
TDS-PEAP-TLS
Identity Store:
AD1
Authorization Profiles:
SGA Security Group:
Authentication Protocol :
EAP-TLS
Authentication Result
RadiusPacketType=Drop
AuthenticationResult=Error
Related Events
Authentication Details
Logged At:
March 11,2015 7:00:13.374 AM
Occurred At:
March 11,2015 7:00:13.374 AM
Server:
ISE-TDS
Authentication Method:
dot1x
EAP Authentication Method :
EAP-TLS
EAP Tunnel Method :
Username:
[email protected]
RADIUS Username :
host/LENOVO-PC.tdsouth.com
Calling Station ID:
00:26:82:F1:E6:32
Framed IP Address:
Use Case:
Network Device:
WLC
Network Device Groups:
Device Type#All Device Types,Location#All Locations
NAS IP Address:
192.168.1.225
NAS Identifier:
WLC-TDS
NAS Port:
4
NAS Port ID:
NAS Port Type:
Wireless - IEEE 802.11
Allowed Protocol:
TDS-PEAP-TLS
Service Type:
Framed
Identity Store:
AD1
Authorization Profiles:
Active Directory Domain:
tdsouth.com
Identity Group:
Allowed Protocol Selection Matched Rule:
TDS-WLAN-DOT1X-EAP-TLS
Identity Policy Matched Rule:
Default
Selected Identity Stores:
Authorization Policy Matched Rule:
SGA Security Group:
AAA Session ID:
ISE-TDS/215430381/40
Audit Session ID:
c0a801e10000007f54ffe828
Tunnel Details:
Cisco-AVPairs:
audit-session-id=c0a801e10000007f54ffe828
Other Attributes:
ConfigVersionId=7,Device Port=32768,DestinationPort=1812,RadiusPacketType=AccessRequest,Protocol=Radius,Framed-MTU=1300,State=37CPMSessionID=c0a801e10000007f54ffe828;30SessionID=ISE-TDS/215430381/40;,Airespace-Wlan-Id=1,CPMSessionID=c0a801e10000007f54ffe828,EndPointMACAddress=00-26-82-F1-E6-32,GroupsOrAttributesProcessFailure=true,Device Type=Device Type#All Device Types,Location=Location#All Locations,Device IP Address=192.168.1.225,Called-Station-ID=e0-d1-73-28-a7-70:TDS-Corp
Posture Status:
EPS Status:
Steps
11001 Received RADIUS Access-Request
11017 RADIUS created a new session
Evaluating Service Selection Policy
15048 Queried PIP
15048 Queried PIP
15048 Queried PIP
15048 Queried PIP
15004 Matched rule
11507 Extracted EAP-Response/Identity
12500 Prepared EAP-Request proposing EAP-TLS with challenge
11006 Returned RADIUS Access-Challenge
11001 Received RADIUS Access-Request
11018 RADIUS is re-using an existing session
12502 Extracted EAP-Response containing EAP-TLS challenge-response and accepting EAP-TLS as negotiated
12800 Extracted first TLS record; TLS handshake started
12805 Extracted TLS ClientHello message
12806 Prepared TLS ServerHello message
12807 Prepared TLS Certificate message
12809 Prepared TLS CertificateRequest message
12505 Prepared EAP-Request with another EAP-TLS challenge
11006 Returned RADIUS Access-Challenge
11001 Received RADIUS Access-Request
11018 RADIUS is re-using an existing session
12504 Extracted EAP-Response containing EAP-TLS challenge-response
12505 Prepared EAP-Request with another EAP-TLS challenge
11006 Returned RADIUS Access-Challenge
11001 Received RADIUS Access-Request
11018 RADIUS is re-using an existing session
12504 Extracted EAP-Response containing EAP-TLS challenge-response
12505 Prepared EAP-Request with another EAP-TLS challenge
11006 Returned RADIUS Access-Challenge
11001 Received RADIUS Access-Request
11018 RADIUS is re-using an existing session
12504 Extracted EAP-Response containing EAP-TLS challenge-response
12505 Prepared EAP-Request with another EAP-TLS challenge
11006 Returned RADIUS Access-Challenge
11001 Received RADIUS Access-Request
11018 RADIUS is re-using an existing session
12504 Extracted EAP-Response containing EAP-TLS challenge-response
12571 ISE will continue to CRL verification if it is configured for specific CA
12571 ISE will continue to CRL verification if it is configured for specific CA
12811 Extracted TLS Certificate message containing client certificate
12812 Extracted TLS ClientKeyExchange message
12813 Extracted TLS CertificateVerify message
12804 Extracted TLS Finished message
12801 Prepared TLS ChangeCipherSpec message
12802 Prepared TLS Finished message
12816 TLS handshake succeeded
12509 EAP-TLS full handshake finished successfully
12505 Prepared EAP-Request with another EAP-TLS challenge
11006 Returned RADIUS Access-Challenge
11001 Received RADIUS Access-Request
11018 RADIUS is re-using an existing session
12504 Extracted EAP-Response containing EAP-TLS challenge-response
Evaluating Identity Policy
15006 Matched Default Rule
24433 Looking up machine/host in Active Directory - [email protected]
24492 Machine authentication against Active Directory has failed
22059 The advanced option that is configured for process failure is used
22062 The 'Drop' advanced option is configured in case of a failed authentication request
But the user can authenticated by EAP-TLS
AAA Protocol > RADIUS Authentication Detail
RADIUS Audit Session ID :
c0a801e10000007f54ffe828
AAA session ID :
ISE-TDS/215430381/59
Date :
March 11,2015
Generated on March 11, 2015 2:48:43 PM ICT
Actions
Troubleshoot Authentication
View Diagnostic MessagesAudit Network Device Configuration
View Network Device Configuration
View Server Configuration Changes
Authentication Summary
Logged At:
March 11,2015 7:27:32.475 AM
RADIUS Status:
Authentication succeeded
NAS Failure:
Username:
[email protected]
MAC/IP Address:
00:26:82:F1:E6:32
Network Device:
WLC : 192.168.1.225 :
Allowed Protocol:
TDS-PEAP-TLS
Identity Store:
AD1
Authorization Profiles:
TDS-WLAN-PERMIT-ALL
SGA Security Group:
Authentication Protocol :
EAP-TLS
Authentication Result
[email protected]
State=ReauthSession:c0a801e10000007f54ffe828
Class=CACS:c0a801e10000007f54ffe828:ISE-TDS/215430381/59
Termination-Action=RADIUS-Request
cisco-av-pair=ACS:CiscoSecure-Defined-ACL=#ACSACL#-IP-PERMIT_ALL_TRAFFIC-508adc03
MS-MPPE-Send-Key=5a:9a:ca:b0:0b:2a:fe:7d:fc:2f:8f:d8:96:25:50:bb:c8:7d:91:ba:4c:09:63:57:3e:6e:4e:93:5d:5c:b0:5d
MS-MPPE-Recv-Key=24:fa:8d:c3:65:94:d8:29:77:aa:71:93:05:1b:0f:a5:58:f8:a2:9c:d0:0e:80:2d:b6:12:ae:c3:8c:46:22:48
Airespace-Wlan-Id=1
Related Events
Authentication Details
Logged At:
March 11,2015 7:27:32.475 AM
Occurred At:
March 11,2015 7:27:32.474 AM
Server:
ISE-TDS
Authentication Method:
dot1x
EAP Authentication Method :
EAP-TLS
EAP Tunnel Method :
Username:
[email protected]
RADIUS Username :
[email protected]
Calling Station ID:
00:26:82:F1:E6:32
Framed IP Address:
Use Case:
Network Device:
WLC
Network Device Groups:
Device Type#All Device Types,Location#All Locations
NAS IP Address:
192.168.1.225
NAS Identifier:
WLC-TDS
NAS Port:
4
NAS Port ID:
NAS Port Type:
Wireless - IEEE 802.11
Allowed Protocol:Hello,
I am analyzing your question and seeing the ISE logs i can see that the machine credentials was LENOVO-PC. Do you have shure that these credentials has in your Active Directory to validate this machine ? The machine certificate has the correct machine credentials from the domain ? The group mapped in the ISE rule has the machine inside this group ?
Differently from the user authentication that happens with success because the domain credentials can be validate from the Active Directory and get access to the network. -
Upload has failed. Network failure
Hello.
Since i work with indesign cc, i have a trouble wit folio builder panel: Everytime the upload fails at first attempt, it appears this message:"Upload has failed. Network failure." Ever works when i retried, but not at first attempts. This is unworkable with large publications, with a lot of articles. I´ve wrote that this is a trouble with the acrobat.com service outage, i need a solution.
Thanks. Best regards.Was successfully re-linking indesign files to my dps producer dashboard. Files had been converted to CC (from CS6)-- and was switching from v26 to v 28. Everything was working just FINE, until about 6pm yesterday-- I had re-linked almost 3/4ths of my files, then I began getting the NETWORK FAILURE notice.
This morning, I tried creating a new folio-- managed to upload ONE new file into the new folio, then got the same 'network failure' message on the next one I tried to upload.
These files are from a successful app-- already in the app store, but it sure doesn't work right now! IOS 7 ... #!#*?
It is not about where your files are-- or how much memory -- Something else is going on.
I know you guys will figure it out...and will be standing by, anxious to fix my app!
THANKS.
nancy p -
Issues Updating Articles - The upload has failed. Network failure.
Not sure if the server is being unresponsive or if it is something my end but for the last couple of hours I've had problems updating my articles - it's very intermittent, sometimes working but more often than not I'm getting the error -
The upload has failed.
Network failure.
Very frustrating...Was successfully re-linking indesign files to my dps producer dashboard. Files had been converted to CC (from CS6)-- and was switching from v26 to v 28. Everything was working just FINE, until about 6pm yesterday-- I had re-linked almost 3/4ths of my files, then I began getting the NETWORK FAILURE notice.
This morning, I tried creating a new folio-- managed to upload ONE new file into the new folio, then got the same 'network failure' message on the next one I tried to upload.
These files are from a successful app-- already in the app store, but it sure doesn't work right now! IOS 7 ... #!#*?
It is not about where your files are-- or how much memory -- Something else is going on.
I know you guys will figure it out...and will be standing by, anxious to fix my app!
THANKS.
nancy p -
An error has occurred while saving your changes to the server. Network failure.
When I'm importing my articles I get this message. "An error has occurred while saving your changes to the server.
Network failure. Do you want to try again?"
Any Help would be great.I had several fails yesterday as well. Not sure what the issue was. Haven't tried today, but I know there were 1 or 2 other people posting the same issue.
-
Portal failed to access remote resource due to network failures
Hi,
We have a portlet that allows users to upload files to a SQL Server database and make it available for other users to access. The portlet code is on our remote servers. Everything works fine in dev environment, but certain files fail in pre-prod and prod within the portal, but work fine when the code is executed outside the portal.
I keep getting this error:
Error - Portal failed to access remote resource due to network failures. Try again later or contact your portal administrator.
What could the problem be?
Thank you for your help.
RadIf the Studio service looks good on the remote server where Studio is installed (check that
the service is started and look in the Studio logs for any warnings or errors), you should
also verify the configuration settings in the Studio remote server object. Is it properly
configured and pointing to the correct remote server?
If so, check the portal servers access to the Studio server via the port specified in the remote
server (default is 11935). You can test this by doing a telnet test on the portal server. In a cmd
prompt (Windows) or on the CLI (Unix), type 'telnet [studioserver] 11935', where "<servername> is
the name of your Studio remote server. The screen should just go blank, meaning that there is
something accepting connections on that port on the given server. (We would hope it's the Studio
app and not another service occupying that port.) If you get "Could not open connection to the host"
or some such similar result, check that the network between the portal and the Studio remote server
is open (ie, make sure there isn't any port blocking or a firewall in place that would hinder the
communication between the two servers). -
HP Photosmart C7280 All-in-one problem printing. Ink System Failure has failed unable to copy--
I'm having a problem printing on my HP Photosmart C7280 All-In-One. The following message is what came up on the printer screen: Ink System Failure has failed unable to copy, receive faxes or print. Refer to printer documentation Error O.cl9a0007.
Does anyone have any suggestions?
This question was solved.
View Solution.Hey Spider! First off welcome to the forum.
I would recommend removing all the ink cartridges, unplugging the USB cable from the computer that connects to the printer, and then shutting the printer off completely by removing the power cord. Then restart your computer. Turn the printer back on but leave it disconnected from the computer. After it has finished its power on cycle go ahead and insert the ink cartridges back into the printer and be sure to seat them properly.
After you have all the cartridges back in the printer properly then connect it to the computer. See if this resolves the issue. If not post back with any findings.
Thanks,
SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Pavilion dm4 failure "The recovery attempt has failed"
Laptop gave me the following Message: The recovery attempt has failed. Select one of the following buttons. Save Log Details Retry. Saved the Log and Retry (two times) with same issue:This is the Log,Please Help
P2PP BurnBoot Check Failed
Possible Causes:
1. Yellow-Bang occured at Device Manager
2. Some silent-install failure of applications
3. Found failed at PININST_BBV
4. Found failed at PININST_BBV2
5. Found Memory Dump file
Suggestion:
1. Checking REGDEV_BB.LOG for drivers
2. Checking BBApps.log for applications
3. Checking MEMDUMP_BBV.log for memory dump file
Note(for ODM):
If you know which component failed in preinstall process
after checking above files, please OTS it to the component owner.
Otherwise, suggest to contact TWN PDC NB-PreinPM or create PIN-Log and OTS it with OTS Category Image
[RegistryDevicesCheck]
Result=PASSED
[PININST_BBV]
PININST (Mini-FBI) starts at: 02:19:06 Sunday, April 12, 2015
[RunOnceThese_CMD#1]
LAUNCHED=> "CMD.exe /c C:\System.sav\Util\WMIWirelessOn.exe"
START=> 02:19:08 Sunday, April 12, 2015
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 02:19:14 Sunday, April 12, 2015
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunOnceThese_CMD#2]
LAUNCHED=> "c:\SwSetup\ocamrk\ocamrk.cmd"
START=> 02:19:14 Sunday, April 12, 2015
END=> 02:19:20 Sunday, April 12, 2015
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunOnceThese_CMD#3]
LAUNCHED=> "CMD.exe /c C:\System.sav\Util\Pre-BBV1.CMD"
START=> 02:19:20 Sunday, April 12, 2015
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 02:19:47 Sunday, April 12, 2015
RESULT=> Command finished in 26 seconds.
>==============================================================================
[RunThese_CMD#1]
LAUNCHED=> "CMD.exe /c cscript.exe /nologo C:\System.sav\Util\TDCTWKs\ChangeVol.vbs>>C:\System.sav\Logs\ChgVolBB.log"
START=> 02:19:48 Sunday, April 12, 2015
END=> 02:19:49 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#2]
LAUNCHED=> "CMD.exe /c C:\System.sav\Util\WMIDetectTest2.bat"
START=> 02:19:49 Sunday, April 12, 2015
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 02:19:50 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#3]
LAUNCHED=> "C:\SWSetup\ESUW7\ESURun.bat"
START=> 02:19:50 Sunday, April 12, 2015
END=> 02:20:21 Sunday, April 12, 2015
RESULT=> Command finished in 31 seconds.
>==============================================================================
[RunThese_CMD#4]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\imgtwk.cmd"
START=> 02:20:21 Sunday, April 12, 2015
END=> 02:20:22 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#5]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Chipset_s.CMD"
START=> 02:20:22 Sunday, April 12, 2015
END=> 02:20:43 Sunday, April 12, 2015
RESULT=> Command finished in 21 seconds.
>==============================================================================
[RunThese_CMD#6]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Chipset_r.CMD"
START=> 02:20:43 Sunday, April 12, 2015
END=> 02:20:45 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#7]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Chipset_L.CMD"
START=> 02:20:45 Sunday, April 12, 2015
END=> 02:20:46 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#8]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Video_s.CMD"
START=> 02:20:46 Sunday, April 12, 2015
END=> 02:22:37 Sunday, April 12, 2015
RESULT=> Command finished in 111 seconds.
>==============================================================================
[RunThese_CMD#9]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Video_r.CMD"
START=> 02:22:37 Sunday, April 12, 2015
END=> 02:22:38 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#10]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Video_L.CMD"
START=> 02:22:38 Sunday, April 12, 2015
END=> 02:22:39 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#11]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\VID1_L.CMD"
START=> 02:22:39 Sunday, April 12, 2015
END=> 02:22:40 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#12]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\VID164_s.CMD"
START=> 02:22:40 Sunday, April 12, 2015
END=> 02:22:41 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#13]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\WLAN_I.CMD"
START=> 02:22:41 Sunday, April 12, 2015
END=> 02:22:42 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#14]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\WLAN_B.CMD"
START=> 02:22:42 Sunday, April 12, 2015
END=> 02:24:03 Sunday, April 12, 2015
RESULT=> Command finished in 81 seconds.
>==============================================================================
[RunThese_CMD#15]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\WLAN_A.CMD"
START=> 02:24:03 Sunday, April 12, 2015
END=> 02:24:04 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#16]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\WLAN4.CMD"
START=> 02:24:04 Sunday, April 12, 2015
END=> 02:24:05 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#17]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\RalinkWF.cmd"
START=> 02:24:05 Sunday, April 12, 2015
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 02:24:06 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#18]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\RalinkBT.cmd"
START=> 02:24:06 Sunday, April 12, 2015
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 02:24:07 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#19]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BTooth.CMD"
START=> 02:24:07 Sunday, April 12, 2015
END=> 02:24:08 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#20]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\WWANG2K.CMD"
START=> 02:24:08 Sunday, April 12, 2015
END=> 02:24:09 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#21]
LAUNCHED=> "cscript.exe c:\SwSetup\powerset\sys_mem_check.vbs"
START=> 02:24:09 Sunday, April 12, 2015
END=> 02:24:10 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#22]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Net.CMD"
START=> 02:24:10 Sunday, April 12, 2015
END=> 02:24:11 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#23]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPProtSHD.CMD"
START=> 02:24:11 Sunday, April 12, 2015
END=> 02:24:22 Sunday, April 12, 2015
RESULT=> Command finished in 11 seconds.
>==============================================================================
[RunThese_CMD#24]
LAUNCHED=> "c:\System.sav\Util\CreateEFIPartition.cmd"
START=> 02:24:22 Sunday, April 12, 2015
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 02:24:38 Sunday, April 12, 2015
RESULT=> Command finished in 16 seconds.
>==============================================================================
[RunThese_CMD#25]
LAUNCHED=> "cmd.exe /c C:\System.sav\Util\TDC\OOBE\CompName.cmd"
START=> 02:24:38 Sunday, April 12, 2015
END=> 02:24:39 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#26]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPQL.CMD"
START=> 02:24:39 Sunday, April 12, 2015
END=> 02:24:40 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#27]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\MEI_s.CMD"
START=> 02:24:40 Sunday, April 12, 2015
END=> 02:25:01 Sunday, April 12, 2015
RESULT=> Command finished in 21 seconds.
>==============================================================================
[RunThese_CMD#28]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\MEI_r.CMD"
START=> 02:25:01 Sunday, April 12, 2015
END=> 02:25:03 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#29]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\MEI_L.CMD"
START=> 02:25:03 Sunday, April 12, 2015
END=> 02:25:04 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#30]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\TBT_s.CMD"
START=> 02:25:04 Sunday, April 12, 2015
END=> 02:25:10 Sunday, April 12, 2015
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#31]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\TBT_r.CMD"
START=> 02:25:10 Sunday, April 12, 2015
END=> 02:25:11 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#32]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\TBT_L.CMD"
START=> 02:25:11 Sunday, April 12, 2015
END=> 02:25:12 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#33]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\RST_S.CMD"
START=> 02:25:12 Sunday, April 12, 2015
END=> 02:25:23 Sunday, April 12, 2015
RESULT=> Command finished in 11 seconds.
>==============================================================================
[RunThese_CMD#34]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\RST_r.CMD"
START=> 02:25:23 Sunday, April 12, 2015
END=> 02:25:24 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#35]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\RST_L.CMD"
START=> 02:25:24 Sunday, April 12, 2015
END=> 02:25:25 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#36]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\touchScr_L.CMD"
START=> 02:25:25 Sunday, April 12, 2015
END=> 02:25:26 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#37]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Touchpad_s.CMD"
START=> 02:25:26 Sunday, April 12, 2015
END=> 02:25:42 Sunday, April 12, 2015
RESULT=> Command finished in 16 seconds.
>==============================================================================
[RunThese_CMD#38]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Touchpad_r.CMD"
START=> 02:25:42 Sunday, April 12, 2015
END=> 02:25:43 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#39]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\TouchPad_L.CMD"
START=> 02:25:43 Sunday, April 12, 2015
END=> 02:25:44 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#40]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Network_s.CMD"
START=> 02:25:44 Sunday, April 12, 2015
END=> 02:26:20 Sunday, April 12, 2015
RESULT=> Command finished in 36 seconds.
>==============================================================================
[RunThese_CMD#41]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Network_r.CMD"
START=> 02:26:20 Sunday, April 12, 2015
END=> 02:26:21 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#42]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Network_L.CMD"
START=> 02:26:21 Sunday, April 12, 2015
END=> 02:26:22 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#43]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\FingerV_s.CMD"
START=> 02:26:22 Sunday, April 12, 2015
END=> 02:26:43 Sunday, April 12, 2015
RESULT=> Command finished in 21 seconds.
>==============================================================================
[RunThese_CMD#44]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\FingerV_L.CMD"
START=> 02:26:43 Sunday, April 12, 2015
END=> 02:26:44 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#45]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Card_s.CMD"
START=> 02:26:44 Sunday, April 12, 2015
END=> 02:26:55 Sunday, April 12, 2015
RESULT=> Command finished in 11 seconds.
>==============================================================================
[RunThese_CMD#46]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Card_r.CMD"
START=> 02:26:55 Sunday, April 12, 2015
END=> 02:26:56 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#47]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Card_L.CMD"
START=> 02:26:56 Sunday, April 12, 2015
END=> 02:26:57 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#48]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Audio_s.CMD"
START=> 02:26:57 Sunday, April 12, 2015
END=> 02:27:38 Sunday, April 12, 2015
RESULT=> Command finished in 41 seconds.
>==============================================================================
[RunThese_CMD#49]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Audio_r.CMD"
START=> 02:27:38 Sunday, April 12, 2015
END=> 02:27:40 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#50]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Audio_L.CMD"
START=> 02:27:40 Sunday, April 12, 2015
END=> 02:27:41 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#51]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\MyWLAN3.CMD"
START=> 02:27:41 Sunday, April 12, 2015
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 02:27:47 Sunday, April 12, 2015
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#52]
LAUNCHED=> "C:\System.sav\Util\VPC_QFE.cmd"
START=> 02:27:47 Sunday, April 12, 2015
END=> 02:27:48 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#53]
LAUNCHED=> "CMD.exe /c C:\System.sav\bbv\QFEList32.cmd"
START=> 02:27:48 Sunday, April 12, 2015
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 02:27:54 Sunday, April 12, 2015
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#54]
LAUNCHED=> "C:\System.sav\Util\_RTEND.CMD"
START=> 02:27:54 Sunday, April 12, 2015
END=> 02:27:55 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
PININST (Mini-FBI) exits at: 02:27:57 Sunday, April 12, 2015
[Mini-FBI]
Result=PASSED
[PININST_BBV2]
PININST (Mini-FBI) starts at: 02:29:08 Sunday, April 12, 2015
[RunOnceThese_CMD#1]
LAUNCHED=> "C:\SYSTEM.SAV\UTIL\CLEANFBI.CMD"
START=> 02:29:10 Sunday, April 12, 2015
END=> 02:29:11 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunOnceThese_CMD#2]
LAUNCHED=> "CMD.exe /c C:\System.sav\Util\Pre-BBV2.CMD"
START=> 02:29:11 Sunday, April 12, 2015
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 02:29:37 Sunday, April 12, 2015
RESULT=> Command finished in 26 seconds.
>==============================================================================
[RunThese_CMD#1]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BCBT7.CMD"
START=> 02:29:39 Sunday, April 12, 2015
END=> 02:29:40 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#2]
LAUNCHED=> "C:\System.sav\Util\RemoveEFIBits.cmd"
START=> 02:29:40 Sunday, April 12, 2015
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 02:29:41 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#3]
LAUNCHED=> "C:\System.sav\OSEnhReg\SETUP.cmd"
START=> 02:29:41 Sunday, April 12, 2015
END=> 02:29:42 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#4]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\MYWIMAXS.cmd"
START=> 02:29:42 Sunday, April 12, 2015
END=> 02:29:48 Sunday, April 12, 2015
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#5]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HpNavigator.CMD"
START=> 02:29:48 Sunday, April 12, 2015
END=> 02:29:49 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#6]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BWIMAXT.cmd"
START=> 02:29:49 Sunday, April 12, 2015
END=> 02:29:50 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#7]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPWA.CMD"
START=> 02:29:50 Sunday, April 12, 2015
END=> 02:29:51 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#8]
LAUNCHED=> "cscript.exe c:\System.sav\Util\webcam.vbs"
START=> 02:29:51 Sunday, April 12, 2015
END=> 02:29:52 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#9]
LAUNCHED=> "C:\SWSetup\ESUW7\ESUDelete.bat"
START=> 02:29:52 Sunday, April 12, 2015
END=> 02:29:53 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#10]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\LSPININST.CMD"
START=> 02:29:53 Sunday, April 12, 2015
END=> 02:29:54 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#11]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSF.CMD"
START=> 02:29:54 Sunday, April 12, 2015
END=> 02:29:55 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#12]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\MSDVD.CMD"
START=> 02:29:55 Sunday, April 12, 2015
END=> 02:30:51 Sunday, April 12, 2015
RESULT=> Command finished in 56 seconds.
>==============================================================================
[RunThese_CMD#13]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPTSDVD.CMD"
START=> 02:30:51 Sunday, April 12, 2015
END=> 02:30:53 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#14]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\MSVideo.CMD"
START=> 02:30:53 Sunday, April 12, 2015
END=> 02:33:49 Sunday, April 12, 2015
RESULT=> Command finished in 176 seconds.
>==============================================================================
[RunThese_CMD#15]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\MSPhoto.CMD"
START=> 02:33:49 Sunday, April 12, 2015
END=> 02:35:10 Sunday, April 12, 2015
RESULT=> Command finished in 81 seconds.
>==============================================================================
[RunThese_CMD#16]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\MSMusic.CMD"
START=> 02:35:10 Sunday, April 12, 2015
END=> 02:36:01 Sunday, April 12, 2015
RESULT=> Command finished in 51 seconds.
>==============================================================================
[RunThese_CMD#17]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPTSVideo.CMD"
START=> 02:36:01 Sunday, April 12, 2015
END=> 02:36:02 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#18]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPTSRB.CMD"
START=> 02:36:02 Sunday, April 12, 2015
END=> 02:36:03 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#19]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPTSPhoto.CMD"
START=> 02:36:03 Sunday, April 12, 2015
END=> 02:36:04 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#20]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPTSMusic.CMD"
START=> 02:36:04 Sunday, April 12, 2015
END=> 02:36:05 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#21]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\MSMovieTV.CMD"
START=> 02:36:05 Sunday, April 12, 2015
END=> 02:36:12 Sunday, April 12, 2015
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#22]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\MSWebcam.CMD"
START=> 02:36:12 Sunday, April 12, 2015
END=> 02:37:48 Sunday, April 12, 2015
RESULT=> Command finished in 96 seconds.
>==============================================================================
[RunThese_CMD#23]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPTSWebCam.CMD"
START=> 02:37:48 Sunday, April 12, 2015
END=> 02:37:49 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#24]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\TSLC.CMD"
START=> 02:37:49 Sunday, April 12, 2015
END=> 02:37:50 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#25]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\MSMenu.CMD"
START=> 02:37:50 Sunday, April 12, 2015
END=> 02:37:56 Sunday, April 12, 2015
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#26]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\TPIt.CMD"
START=> 02:37:56 Sunday, April 12, 2015
END=> 02:38:02 Sunday, April 12, 2015
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#27]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\TouchPack.CMD"
START=> 02:38:02 Sunday, April 12, 2015
END=> 02:38:03 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#28]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\SLight.CMD"
START=> 02:38:03 Sunday, April 12, 2015
END=> 02:38:04 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#29]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\NYTimes.CMD"
START=> 02:38:04 Sunday, April 12, 2015
END=> 02:38:10 Sunday, April 12, 2015
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#30]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\IESearch.CMD"
START=> 02:38:10 Sunday, April 12, 2015
END=> 02:38:17 Sunday, April 12, 2015
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#31]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\IEHome.CMD"
START=> 02:38:17 Sunday, April 12, 2015
END=> 02:38:23 Sunday, April 12, 2015
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#32]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPHN.CMD"
START=> 02:38:23 Sunday, April 12, 2015
END=> 02:38:29 Sunday, April 12, 2015
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#33]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPBIOSUEFI.CMD"
START=> 02:38:29 Sunday, April 12, 2015
END=> 02:38:35 Sunday, April 12, 2015
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#34]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\EStar.CMD"
START=> 02:38:35 Sunday, April 12, 2015
END=> 02:38:36 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#35]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Digifish.CMD"
START=> 02:38:36 Sunday, April 12, 2015
END=> 02:38:37 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#36]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\CyberDVD.cmd"
START=> 02:38:37 Sunday, April 12, 2015
END=> 02:39:59 Sunday, April 12, 2015
RESULT=> Command finished in 81 seconds.
>==============================================================================
[RunThese_CMD#37]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\SSysBIOS.CMD"
START=> 02:39:59 Sunday, April 12, 2015
END=> 02:40:00 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#38]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\RSysBIOS.CMD"
START=> 02:40:00 Sunday, April 12, 2015
END=> 02:40:01 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#39]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\PZMSysBIOS.CMD"
START=> 02:40:01 Sunday, April 12, 2015
END=> 02:40:12 Sunday, April 12, 2015
RESULT=> Command finished in 11 seconds.
>==============================================================================
[RunThese_CMD#40]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\LSysBIOS.CMD"
START=> 02:40:12 Sunday, April 12, 2015
END=> 02:40:13 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#41]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\xpsVeriz.CMD"
START=> 02:40:13 Sunday, April 12, 2015
END=> 02:40:14 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#42]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Snfish.CMD"
START=> 02:40:14 Sunday, April 12, 2015
END=> 02:40:15 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#43]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\RoxCN.CMD"
START=> 02:40:15 Sunday, April 12, 2015
END=> 02:40:46 Sunday, April 12, 2015
RESULT=> Command finished in 31 seconds.
>==============================================================================
[RunThese_CMD#44]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\rmapinst.cmd"
START=> 02:40:46 Sunday, April 12, 2015
END=> 02:40:47 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#45]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\PowerDVD.CMD"
START=> 02:40:47 Sunday, April 12, 2015
END=> 02:40:48 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#46]
LAUNCHED=> "\System.sav\Util\TDC\MCPP\MyColors.CMD"
START=> 02:40:48 Sunday, April 12, 2015
END=> 02:40:49 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#47]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\LOKI.CMD"
START=> 02:40:49 Sunday, April 12, 2015
END=> 02:40:50 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#48]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\intelWD.CMD"
START=> 02:40:50 Sunday, April 12, 2015
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 02:40:51 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#49]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\InetSec.CMD"
START=> 02:40:51 Sunday, April 12, 2015
END=> 02:41:27 Sunday, April 12, 2015
RESULT=> Command finished in 36 seconds.
>==============================================================================
[RunThese_CMD#50]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\IEACC.CMD"
START=> 02:41:27 Sunday, April 12, 2015
END=> 02:41:34 Sunday, April 12, 2015
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#51]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSWFK.cmd"
START=> 02:41:34 Sunday, April 12, 2015
END=> 02:41:35 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#52]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSPIP.cmd"
START=> 02:41:35 Sunday, April 12, 2015
END=> 02:42:16 Sunday, April 12, 2015
RESULT=> Command finished in 41 seconds.
>==============================================================================
[RunThese_CMD#53]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPQWMM.CMD"
START=> 02:42:16 Sunday, April 12, 2015
END=> 02:45:02 Sunday, April 12, 2015
RESULT=> Command finished in 166 seconds.
>==============================================================================
[RunThese_CMD#54]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\hppm.CMD"
START=> 02:45:02 Sunday, April 12, 2015
END=> 02:45:18 Sunday, April 12, 2015
RESULT=> Command finished in 16 seconds.
>==============================================================================
[RunThese_CMD#55]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPCM.CMD"
START=> 02:45:18 Sunday, April 12, 2015
END=> 02:45:19 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#56]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HGUS.CMD"
START=> 02:45:19 Sunday, April 12, 2015
END=> 02:49:16 Sunday, April 12, 2015
RESULT=> Command finished in 236 seconds.
>==============================================================================
[RunThese_CMD#57]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HGTO.CMD"
START=> 02:49:16 Sunday, April 12, 2015
END=> 02:49:17 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#58]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\GPSDIEF.CMD"
START=> 02:49:17 Sunday, April 12, 2015
END=> 02:49:18 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#59]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BingBar.CMD"
START=> 02:49:18 Sunday, April 12, 2015
END=> 02:49:39 Sunday, April 12, 2015
RESULT=> Command finished in 21 seconds.
>==============================================================================
[RunThese_CMD#60]
LAUNCHED=> "C:\SWSetup\Wallpaper\Disk1\Wallpaper.exe"
START=> 02:49:39 Sunday, April 12, 2015
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 02:49:40 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#61]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BBYCM.CMD"
START=> 02:49:40 Sunday, April 12, 2015
END=> 02:49:41 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#62]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\AFLASH.CMD"
START=> 02:49:41 Sunday, April 12, 2015
END=> 02:49:42 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#63]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BTBSSEND.CMD"
START=> 02:49:42 Sunday, April 12, 2015
END=> 02:49:54 Sunday, April 12, 2015
RESULT=> Command finished in 11 seconds.
>==============================================================================
[RunThese_CMD#64]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\WINLive_BBV2.CMD"
START=> 02:49:54 Sunday, April 12, 2015
END=> 02:50:15 Sunday, April 12, 2015
RESULT=> Command finished in 21 seconds.
>==============================================================================
[RunThese_CMD#65]
LAUNCHED=> "cmd.exe /c c:\System.sav\Util\TDC\OOBE\BKG.cmd"
START=> 02:50:15 Sunday, April 12, 2015
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 02:50:16 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#66]
LAUNCHED=> "C:\System.sav\sysPar\RemoveMntDev.cmd"
START=> 02:50:16 Sunday, April 12, 2015
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 02:50:17 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#67]
LAUNCHED=> "C:\System.sav\Util\_RTEND.CMD"
START=> 02:50:17 Sunday, April 12, 2015
END=> 02:50:18 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#68]
LAUNCHED=> "C:\SYSTEM.SAV\FactoryUpdate\FU_6_65539_20100715_100A1\FU65539_BBV2.CMD"
START=> 02:50:18 Sunday, April 12, 2015
END=> 02:50:19 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#69]
LAUNCHED=> "C:\SYSTEM.SAV\FactoryUpdate\FU_6_65458_20100713_100A1\FU65458_BBV2.CMD"
START=> 02:50:19 Sunday, April 12, 2015
END=> 02:50:20 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#70]
LAUNCHED=> "C:\SYSTEM.SAV\FactoryUpdate\FU_6_65327_20100709_100A1\FU65327_BBV2.CMD"
START=> 02:50:20 Sunday, April 12, 2015
END=> 02:50:21 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#71]
LAUNCHED=> "C:\system.sav\Util\TDC\MCPP\DTICON_BBV.CMD"
START=> 02:50:21 Sunday, April 12, 2015
END=> 02:50:22 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#72]
LAUNCHED=> "C:\system.sav\Util\TDC\MCPP\HOTSTART_BBV.CMD"
START=> 02:50:22 Sunday, April 12, 2015
END=> 02:50:23 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#73]
LAUNCHED=> "C:\SWSetup\hpImgEnh\ImgEnh.cmd"
START=> 02:50:23 Sunday, April 12, 2015
END=> 02:50:29 Sunday, April 12, 2015
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#74]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\CTICON.CMD"
START=> 02:50:29 Sunday, April 12, 2015
Pre-Process=> disabled WOW64 File Redirection....
Post-Process=> enabled WOW64 File Redirection....
END=> 02:50:30 Sunday, April 12, 2015
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
PININST (Mini-FBI) exits at: 02:50:33 Sunday, April 12, 2015
[Mini-FBI]
Result=PASSED
[C:\System.sav\Logs\BB\AFLASH.log]
Result=PASSED
[C:\System.sav\Logs\BB\Audio_L.log]
Result=PASSED
[C:\System.sav\Logs\BB\Audio_r.log]
Result=PASSED
[C:\System.sav\Logs\BB\Audio_s.log]
Result=PASSED
[C:\System.sav\Logs\BB\BBYCM.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BCBT7.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BingBar.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BKG_XML.log]
Result=PASSED
[C:\System.sav\Logs\BB\BTBSSEND.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BTooth.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BWIMAXT.log]
Result=PASSED
[C:\System.sav\Logs\BB\Card_L.log]
Result=PASSED
[C:\System.sav\Logs\BB\Card_r.log]
Result=PASSED
[C:\System.sav\Logs\BB\Card_s.log]
Result=PASSED
[C:\System.sav\Logs\BB\Chipset_L.log]
Result=PASSED
[C:\System.sav\Logs\BB\Chipset_r.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Chipset_s.log]
Result=PASSED
[C:\System.sav\Logs\BB\CompName.log]
Result=PASSED
[C:\System.sav\Logs\BB\CustTweak.log]
Result=PASSED
[C:\System.sav\Logs\BB\CyberDVD.log]
Result=PASSED
[C:\System.sav\Logs\BB\Digifish.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\DTICON_BBV.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\EStar.log]
Result=PASSED
[C:\System.sav\Logs\BB\FingerV_L.log]
Result=PASSED
[C:\System.sav\Logs\BB\FingerV_s.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU63360.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU65327.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU65327_BBV2.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\FU65458.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU65458_BBV2.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\FU65539.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU65539_BBV2.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\FU65815.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU66424.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU68460.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU69608.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU70052.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU_Tweaks.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\GPSDIEF.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HGTO.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HGUS.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HOTSTART_BBV.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPBIOSUEFI.log]
Result=PASSED
[C:\System.sav\Logs\BB\HPCM.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPHN.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPNavigator.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\hppm.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPProtSHD.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPQL.log]
Result=PASSED
[C:\System.sav\Logs\BB\HPQWMM.log]
Result=PASSED
[C:\System.sav\Logs\BB\HPSF.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPSPIP.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPSWFK.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPTSDVD.log]
Result=PASSED
[C:\System.sav\Logs\BB\HPTSMusic.log]
Result=PASSED
[C:\System.sav\Logs\BB\HPTSPhoto.log]
Result=PASSED
[C:\System.sav\Logs\BB\HPTSRB.log]
Result=PASSED
[C:\System.sav\Logs\BB\HPTSVideo.log]
Result=PASSED
[C:\System.sav\Logs\BB\HPTSWebCam.log]
Result=PASSED
[C:\System.sav\Logs\BB\HPWA.log]
Result=PASSED
[C:\System.sav\Logs\BB\IEACC.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\IEHome.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\IESearch.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\imgtwk.log]
Result=PASSED
[C:\System.sav\Logs\BB\InetSec.log]
Result=PASSED
[C:\System.sav\Logs\BB\intelWD.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Loki.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\LSSS.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\LSysBIOS.log]
Result=PASSED
[C:\System.sav\Logs\BB\MEI_L.log]
Result=PASSED
[C:\System.sav\Logs\BB\MEI_r.log]
Result=PASSED
[C:\System.sav\Logs\BB\MEI_s.log]
Result=PASSED
[C:\System.sav\Logs\BB\MSDVD.log]
Result=PASSED
[C:\System.sav\Logs\BB\MSLight.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\MSMenu.log]
Result=PASSED
[C:\System.sav\Logs\BB\MSMovieTV.log]
Result=PASSED
[C:\System.sav\Logs\BB\MSMusic.log]
Result=PASSED
[C:\System.sav\Logs\BB\MSPhoto.log]
Result=PASSED
[C:\System.sav\Logs\BB\MSVideo.log]
Result=PASSED
[C:\System.sav\Logs\BB\MSWebcam.log]
Result=PASSED
[C:\System.sav\Logs\BB\MyColors.log]
Result=PASSED
[C:\System.sav\Logs\BB\MYWIMAXS.log]
Result=PASSED
[C:\System.sav\Logs\BB\MyWLAN3.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Net.log]
Result=PASSED
[C:\System.sav\Logs\BB\Network_L.log]
Result=PASSED
[C:\System.sav\Logs\BB\Network_r.log]
Result=PASSED
[C:\System.sav\Logs\BB\Network_s.log]
Result=PASSED
[C:\System.sav\Logs\BB\NYTimes.log]
Result=PASSED
[C:\System.sav\Logs\BB\OSEnhReg.log]
Result=PASSED
[C:\System.sav\Logs\BB\PowerDVD.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\PureOSSR.log]
Result=PASSED
[C:\System.sav\Logs\BB\PZMSysBIOS.log]
Result=PASSED
[C:\System.sav\Logs\BB\RalinkBluetooth.log]
Result=PASSED
[C:\System.sav\Logs\BB\RalinkWiFi.log]
Result=PASSED
[C:\System.sav\Logs\BB\rmapinst.log]
Result=PASSED
[C:\System.sav\Logs\BB\RoxCN.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\RST_L.log]
Result=PASSED
[C:\System.sav\Logs\BB\RST_r.log]
Result=PASSED
[C:\System.sav\Logs\BB\RST_s.log]
Result=PASSED
[C:\System.sav\Logs\BB\RSysBIOS.log]
Result=PASSED
[C:\System.sav\Logs\BB\SD68601.log]
Result=PASSED
[C:\System.sav\Logs\BB\SD70610.log]
Result=PASSED
[C:\System.sav\Logs\BB\Snfish.log]
Result=PASSED
[C:\System.sav\Logs\BB\SSysBIOS.log]
Result=PASSED
[C:\System.sav\Logs\BB\TBT_L.log]
Result=PASSED
[C:\System.sav\Logs\BB\TBT_r.log]
Result=PASSED
[C:\System.sav\Logs\BB\TBT_s.log]
Result=PASSED
[C:\System.sav\Logs\BB\TouchPack.log]
Result=PASSED
[C:\System.sav\Logs\BB\TouchPad_L.log]
Result=PASSED
[C:\System.sav\Logs\BB\Touchpad_r.log]
Result=PASSED
[C:\System.sav\Logs\BB\Touchpad_s.log]
Result=PASSED
[C:\System.sav\Logs\BB\touchScr_L.log]
Result=PASSED
[C:\System.sav\Logs\BB\TPIt.log]
Result=PASSED
[C:\System.sav\Logs\BB\TSLC.log]
Result=PASSED
[C:\System.sav\Logs\BB\VID164_s.log]
Result=PASSED
[C:\System.sav\Logs\BB\VID1_L.log]
Result=PASSED
[C:\System.sav\Logs\BB\Video_L.log]
Result=PASSED
[C:\System.sav\Logs\BB\Video_r.log]
Result=PASSED
[C:\System.sav\Logs\BB\Video_s.log]
Result=PASSED
[C:\System.sav\Logs\BB\WallpaperOk.log]
Log file...
Component: TDC Preinstall Diagnostic Tools for Windows 7 - TDC
Timing: Pininst_BBV2Post
Error: Wallpaper installation failed, did not find ResultCode=0
RESULT=FAILED
Standard Error information...
Standard Out information...
Result=FAILED
[C:\System.sav\Logs\BB\WINLIVE.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\WLAN4.log]
Result=PASSED
[C:\System.sav\Logs\BB\WLAN_A.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\WLAN_B.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\WLAN_I.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\WMIWirelessOn.log]
Result=PASSED
[C:\System.sav\Logs\BB\WWANG2K.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\xpsVeriz.LOG]
Result=PASSED
[LogFiles]
NumOfLogs=128.
[DumpFile]
Result=PASSED
[ 2:51:31.13] Sysprep_succeeded.tag does not exist ...
[ 2:51:31.13] ------------------------------------------------------------------------------------------
[ 2:51:31.13] BBVLast.cmd : [20x] CTOError.flg is detected at the end of BBV process...
[ 2:51:31.13] Suggest to Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[ 2:51:31.15] ------------------------------------------------------------------------------------------
This question was solved.
View Solution.Dear Customer,
Welcome to HP Support Forum and we are glad to assist you.
It looks like you are not able to Boot into the Operating System on your Notebook.
We will surely assist you with this.
Originally the Notebook will have the Recovery Partition and that would give you an option to create a set of Recovery Disk. If you have not created those Recovery Disks when the Notebook was in working condition we cannot do that right now
As of now if you need to recover your Notebook with the new Operating System you can check if the Recovery Partition
is in a working condition or not, If yes you can easily recover/restore your Notebook
If Recovery Partition is corrupted
You need to call HP Technical Support and request for a set of Recovery Disks , So you can recover/restore your Notebook at the earliest
OR
You need call up Microsoft and purchase an Operating System with the License Key, So you can recover/restore your Notebook at the earliest
I strongly recommend you to Contact HP Technical Support over the Phone for further assistance without any delay
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP -
Hi!
I'm using consume adapter service> sqlbinding > to connect to sql database in order to generate sql schemas.
I'm getting below error:
Connecting to the LOB system has failed.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified).
ChristianeHi,
As suggested earlier this seems to be a DTC related issue. It can only occur if the DTC settings are not proper or if firewalls don't allow the default ports to communicate.
Check DTC settings on both SQL and BizTalk Box and also check if MSDTC service is up and running.
Go to Start
à Run
à (type in) Dcomcnfg. You should be inside Component Services MMC.
Expand Component Services
à Computers
à My Computer (right click)
à Properties
à MSDTC tab
à Security Configuration button.
Select the checkboxes as following :
Check the below article from Microsoft Support Team, they have listed all the errors which may come during setting up a new system. They also have your MSDTC error listed.
Resolving the issues you may face during BizTalk Runtime Configuration
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful. -
hi ,
when generate the schema , i got the below error, please any one put your inputs:
Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).thaks shanky,
but facing another , after generate schema from WCF_SQL, im unable get elements in my schema.
this is schema generate from storeprocduer , but thru WCF-sql im unable get the elements like
id, name
<xsd:schema targetNamespace="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:schema="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
<xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
<xsd:element name="Test.dbo.sample">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="id" type="sqltypes:int" minOccurs="0" />
<xsd:element name="name" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="1000" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>19</id>
<name>sw</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>14</id>
<name>swe</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>13</id>
<name>se</name>
</Test.dbo.sample> -
Post Author: LeeCUK
CA Forum: Authentication
I have installed Enterprise XIR2 onto a Windows 2003 server and all services are running.I have installed the client on another windows 2003 server and I can connect to the console via the web.
Firstly desktop intel would not work and gave me the error below, however a new entry appeared in my server dropdown with servername (.Net Portal) and after selecting this Desktop intell worked.
When I try to run designer I dont get the extra server in the dropdown nor does it connect when tryped manually and gives me the same error I was getting for desktop intel.
Im using enterprise authentication
Has anyone figured this out please?
The error im getting is below[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Transport error: Communication failure.(hr=#0x80042a01)Post Author: jsanzone
CA Forum: Authentication
LeeCUK:
The [repo_proxy 13] error seems to be a catch-all for BO in that I've worked with this software (XI R2) for 1 1/2 years now and each time I've encountered [repo_proxy 13] it has been for a different reason, thus, you're going to have to apply troubleshooting checks all over the place until you find the problem. In my particular case I just resolved my [repo_proxy 13] error I've been working on this week, and here was my scenario. Our server in the lab died due to a hard drive failure, so we cut our losses and installed a new & more powerful server. When the rebuild was done I could not connect from my laptop to the repository via Designer (good old [repo_proxy 13] error). After much angst, etc, etc I found out that the servers in the CMC (/businessobjects/enterprise115/admin/en/admin.cwrwere">http://<server>/businessobjects/enterprise115/admin/en/admin.cwrwere) were all down except for one (even though CCM showed all servers "up"). When I went to start the servers in the CMC I was prompted for an account, and no matter what account I tried it won't work. So I went back to the CCM servers and stopped them all, then changed the default account it was using from LocalSystem to the administrator account, restarted all servers in CCM, went back to CMC and noted that all servers were now up as well. Then I went back to my laptop and used Designer and was able to successfully log in. Thus, the end of my story, however, it seems that many [repo_proxy 13] errors have different beginning and endings. For instance, a year ago I had the same [repo_proxy 13] error and brought it to BO tech support. They determined that I had to uninstall my client from my laptop, clean out the registry for any references to BO keys, and remove the c:\program files \Business Objects folder, then reinstall, and sure enough it worked in that case, but not in this case when I tried it again. By digging deeper I found out the root cause to my current problem, and voila, I'm in!
Good luck! -
CTI Warning: The call has failed because of network interruption
Hi, one of agents received incoming call and his call dropped within few seconds and error on CTIOS agent desktop was "CTI Warning: call has failed because of network interruption". I investigated and got info from icm database schema that this error is 26-U-Abort and caused due to network congestion. Network team shown the logs and no error regarding network found. What else could be the reason?
Hi Folks, I am facing the same issue with multiple Agents on random PCs. So it doesn't look PC issue or Phone issue. these Ip Phones not IP Comm.
-
Hello all,I am having some issues with APP-V 5.
I am having particular issues with starting a packaged SIMS.net. I keep recieving:
"Application Failed to Launch. This may be due to a network failure 0x0FD01B25-0000007B"
...within a second or two of clicking on the app-v created shortcut for this software.
To clarify, I had this software working perfectly previously. I recreated this package due to a software update, but it fails to launch now. I started a new package from scratch as this is a complex piece of software with multiple installers to run etc.
To be honest, I keep seeing this error on other applications. At one point, nearly every published app returned the same error. I spent a day trying to diagnose but the following day, everything mysteriously started working again.
I have had a look on kirks blog & Tim Magan, but to no avail.
Any help would be greatly appreciated, as this is a 'business critical application' (as they say).
Quick overview of my setup:
- Single Server configuration (Management, Publishing & SQL) on Server 2012 VM in 2012 Hyper-V
- Win 2000 Domain with 2003 DC
- Windows 7 Enterprise SP1
- SIMS.net Summer 2013 sequenced on 32bit following best practice guide
- Deploying to 32 bit machine
- Client settings pushed by GPO. Powershell execution policy set to allsigned.RESOLVED: This error is caused by the "Program Files" missing from the "C:\ProgramData\Microsoft\Windows\Start Menu\" folder.
Firstly, a big thank you Nicke. You may not have solved the problem, but you sent me down the road to resolve this issue.
After trying the step you mentioned, I placed the computer in an OU with inheritance disabled. From this point onwards, I deduced that it was actually a group policy issue.
In my environment, I redirect start menus to generated start menu. This is created using a powershell script to combine locally installed items and network items. This scripts deletes the content of the 'programdata' start menu (i.e all users start menu)
to prevent these items disrupting the start menu.
Now... The app-v packages were breaking because, the 'Start Menu > Programs' folder did not exist. If an empty 'Start Menu > Programs' exists, the packages work correctly.
I can only assume that the two packages that were working correctly - that I installed these for 'current user only', rather than 'all users'.
It seems a little silly to me that app-v should fall over for something so simple. However, you could argue that it serves me right for playing about with system files :)
Thanks again for the help.
Mark
Maybe you are looking for
-
I've been stuck on this for nearly a week, think I better ask here... After adding the following JAR file from MQ6 client to com.sap.aii.af.jmsproviderlib: CL3Export.jar CL3Nonexport.jar com.ibm.mq.jar com.ibm.mqjms.jar connector.jar dhbcore.jar rmm.
-
I want to digitize some material on an external drive then take this drive and go working on an another FCP. But, when i configure FCP to use only the external drive for capture, doesn't work. Capture stop after few seconds... Is there someone who ha
-
I turn on iTunes. Plug in iPod classic. iPod icon come up. Then freezes up iTunes. Tried tree USB ports and nothing. I've reinstalled iTunes. So why can I sync the iPod?
-
Video Performance On 2009 Mini Before And After Snow Leopard
When I ran Leopard on my 2009 Mac Mini, I could watch full screen video on one of my two monitors while surfing the web on the other. It wasn't flawless, I could see some latency issues, but it was entirely tolerable. With Snow Leopard, the full scre
-
How to take Screen shot on N97
guys please help me out, how to take screen shot in N97? Thanks Akshara N97 Black India Attending Nokia Discussion has become new hobby, Thanks to Nokia... for having so many bugs Solved! Go to Solution.