Sign in issue with Lync Mobile client

Hi guys,
I'm trying to deploy a reverse proxy for mobile and external users, but I am having issues with the mobile client for android. It keeps saying "an unknown error occurred". Please try again.
I've got the log zip file outputted by the client here if someone could have a look and point me in the right direction? I've set
up server farms for the webservices, meet, and dialin.
Desktop clients can log in without any issue btw.
Cheers,
Gareth L. Armstrong

Verify from DNS Configuration and Check what is causing this issue from
Lync Connectivity analyzer
Also to troubleshooting Lync mobility, you can refer below link
http://blogs.technet.com/b/nexthop/archive/2012/02/21/troubleshooting-external-lync-mobility-connectivity-issues-step-by-step.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Similar Messages

Can't send im to lync mobile client after a period of chating

Thanks for your help first.
I'm setting Lync 2013 server, all internal lan function are working fine, except mobile client.
I've setup edge, reverse proxy (using IIS), FE, BE server.
For IM between between desktop lync client, it is working fine.
For IM between mobile lync client and mobile client with desktop lync cleint, I found the following issue:
- between mobile lync client and lync desktop client: The IM function is working sent between both party, no matter it is initial send from mobile or desktop client, but after a random period of time, may be 5 mins or 7 mins or 10 mins, the desktop client
will not able to send IM to the mobile client but the mobile client still able to send IM to desktop client.
- for between lync mobile client
the issue as above.
- between desktop lync client
no such issue found
I've trouble shoot this issue a lot but still can't the root cause?
Do you have any idea?
Many thanks for your help?
I know that when I testing using my mobile phone, my 3G network provider will continuous change my mobile ip address after a period time, does this behaviour will affect Lync server to find the mobile device?
are there any method will Lync server know what the mobile client status and ip address that let Lync server can find the mobile device effectively?
Patrick

I know that when I testing using my mobile phone, my 3G network provider will continuous change my mobile ip address after a period time, does this behaviour will affect Lync server to find the mobile device?
Hi,
Would you please tell us which edition of mobile did you use (Android, IOS or Windows Phone)?
As IPhone and Windows Phone need push notification function but Android Phone doesn’t need.
If possible, you can test with two Android Phone to check if the issue happen with push notification function.
From your description above, it seems that you use 3G network on mobile to connect Lync mobile client. Please check if the issue cause by IP address of mobile, you can change network to a WIFI to have a test.
Also, please double check if the needed ports open as Edwin provided above.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Telephone numbers (officePhone and homePhone) are missing in a contact card in a Lync Server 2013-based Lync mobile client

In my opinion, the error has not completely fixed in KB2967628. After I install the latest November 2014 cumulative
update. I see the following behavior. User A searches for user B. User B never sign in to the Link. There are three fields in the active directory for User B: officePhone, mobilePhone and homePhone (these fields contain different numbers). When searching on
the mobile client (Android/IOS) for user B – as result user A see only mobile number. If User B At least once will go to Link (sign in) when his search will work, (find officePhone). If User B will change, the privacy settings for user A is in the search will
be displayed homePhone field.
On the Desktop client,
I can find all the fields without those actions performed in the example. If I make a request
to the service UCWA manually like this (below
the text) before
actions, which I performed in example, I did not receive officePhone and homePhone – only mobilePhone field.
GET "https://lync.domainname:443/ucwa/oauth/v1/applications/XXXX/people/search?query=$usename$&limit=200" -H "Content-Type: application/json" -H "Accept: application/json" -H "Authorization: $USENAMETOKEN$"

Hi,
Based on your description, I’m sorry I’m a little confused about the following you mentioned. I understand the issue is we can only see the mobile number in the contact card on Lync mobile client and that we can search for users based on their office number,
we can see the home phone field in the contact card but there isn’t number showing. I anything I have misunderstood, please feel free to let us know.
“When searching on the mobile client (Android/IOS) for user B – as result user A see only mobile number. If User B At least once will go to Link (sign in) when his search will work, (find officePhone). If User B will
change, the privacy settings for user A is in the search will be displayed homePhone field.”
According to the KB29677628, this issue is caused by UCWA only sending the work number, and we need to install the update for web components server
http://support.microsoft.com/kb/2967628/en-us
August 2014 Cumulative Update 5.0.8308.738 for Lync Server 2013, web components server
https://support.microsoft.com/kb/2937297/en-us?wa=wsignin1.0
Could you please run the following command to check if the web components server version is
5.0.8308.738?
Get-WmiObject
–query 'select * from win32_product' | where {$_.name
–like "Microsoft Lync Server*"} | ft Name, Version
–AutoSize >c:\User\name\Desktop\version.txt
Best Regards,
Cindy

Work flow from Lync client to Lync mobile client

Hi,
How does call flow from Lync client to Lync mobile client happens , how sign-in happens? how call flow both A/V happens and IM happens...?
Please explain me i have some confusions.
Thanks!!

The following blog describe Lync mobile call scenarios:
http://blog.schertz.name/2013/11/lync-mobility-media-paths/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or
suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
A/V call goes through Lync Edge Server while IM doesn’t.
For Lync mobile sign in process, you can refer to the picture in the following link.
http://technet.microsoft.com/en-us/library/hh690030.aspx
Lisa Zheng
TechNet Community Support

Directory Caching issue with Cisco Jabber client for Windows

Hi ,
I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
Is there any automated way to remove the cache file?
Here is the detail of CUCM,Presence and Jabber.
CUCM version: 9.1.x
Presence : 9.1.X
Jabber : 10.5 and 10.6

Hello
On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
Network Device Enrollment Service.
Our certificate for the CUPS were generated on this Certification Authority too.
I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
Enterprise Trust store for the users.
But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
Our partner left us alone with that unfortunately.
Florent
EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

Issue with pl/sql client

Hi All,
I am getting issue with pl/sql client saying readonly access to DMPROD(database).
could you help me out..what might be causing this problem or how to overcome it?
Thanks a lot.

tvenkatesh07 wrote:
Hi All,
I am getting issue with pl/sql client saying readonly access to DMPROD(database).
could you help me out..what might be causing this problem or how to overcome it?Well, it could be possible that your user, with whom you are trying to connect, is having only read-only access to the db? Did you try to change the user?
Aman....

Android Lync Mobile client authentication method

Good day dears,
I'm very interested in using passive authentication which is really an excellent method ,
and I wonder when will Andriod Lync Mobile client 2013 will support this method ?
or if there is any similar method that can be used currently
Regards.
Best Regards Bisher Shbib

Currently the passive authentication is not applied to Lync android client.
Lisa Zheng
TechNet Community Support

A problem with WAAS mobile client

The customer has a problem with WAAS mobile client. When he disabled WAAS mobile client - all is working, but http is not working.:-( On the server the accelerated networks are configured.The browser send the http request, but the response is not received:-( For other clients it is working. Thank you for help.

I have WAAS mobile server version 3.4.0.1460 on the Windows2003 server with SP1. Client OS is Windows XP. All clients who use WAAS mobile client have WinXP on their notebooks. All clients are on the same network. This client sees this problem when the waas client is active, disabled, and for now when the waas mobile client is uninstalled - it seems like waas mobile client changed registers for IE or FireFox - so all http answers are redirected to nonexisting waas mobile client:-(
Thank you
Roman

Lync Mobile client signs out - Error- IIS reset on Front End - WAS Errors

I have a very limited understanding of Lync dependency's & how to trace the issue I'm now seeing. Would appreciate any direction or information to assist.
We have Primary & Secondary Pools - both pools seem to be effected at different times. The Mobile Clients will error & not sign in until iisreset
is done on the effected Front End.
This issue has started a few weeks ago. Before that this has happened maybe twice in a year.
A few weeks ago we did move the FileStore location of the Primary Front End only (off a Siffs Application store to the local drive of the Primary Front End)– AV scan
exclusion was set for FileStore location.
Also some Windows 2008R2 patches were applied.
The Deployment Wizard has been rerun incase something was broken by MS updates.
The Window Event log is clean apart from:
WAS events: (1 to 4 are grouped)
5013 - A process serving application pool 'LyncUcwa' suffered a fatal communication error with the Windows Process Activation Service. The process id was '24076'. The data field
contains the error number.
5011- The Windows Process Activation Service failed to generate an application pool config file for application pool 'LyncExtFeature'. The error type is '7'.
5189 - A process serving application pool 'LyncIntFeature' suffered a fatal communication error with the Windows Process Activation Service. The process id was '17216'. The data
field contains the error number.
5011 - A process serving application pool 'LyncUcwa' exceeded time limits during shut down. The process id was '12520'.
The Windows Process Activation Service failed to generate an application pool config file for application pool 'LyncIntReach'. The error type is '7'. To resolve this issue, please
ensure that the applicationhost.config file is correct and recommit the last configuration changes made. The data field contains the error number.
Schannel: Same Error event happens twice within a few seconds
ID 36888 -
The following fatal alert was generated: 10. The internal error state is 1203.
ID 36888 -
The following fatal alert was generated: 10. The internal error state is 1203.
From What I’ve read SChannel doesn’t seem to be an issue.
Another set of WAS events:
5011 - A process serving application pool 'LyncUcwa' suffered a fatal communication error with the Windows Process Activation Service. The process id was '19132'.
5011 - A process serving application pool 'LyncIntFeature' suffered a fatal communication error with the Windows Process Activation Service. The process id was
'23876'.
5011 - A process serving application pool 'LyncIntReach' suffered a fatal communication error with the Windows Process Activation Service. The process id was
'9876'.
5011 - A process serving application pool 'LyncExtFeature' suffered a fatal communication error with the Windows Process Activation Service. The process id was
'21804'.
5138 -
A worker process '6620' serving application pool 'LyncUcwa' failed to stop a listener channel for protocol 'http' in the allotted time.
5013 - A process serving application pool 'LyncUcwa' exceeded time limits during shut down.
Our Exchange UM started to generate errors recently but not sure if that’s a result of the iisreset for WWW Pub – but these events don’t match any timing of Front End events:
Windows Process Activation Service
11/13/2014 04:06:37 PM
LogName=System
SourceName=Microsoft-Windows-Service Control Manager
EventCode=7031
EventType=2
Type=Error
ComputerName=Pxxx.xxx.com.au
TaskCategory=The operation completed successfully.
OpCode=The operation completed successfully.
RecordNumber=62445
Keywords=Classic
Message=The Windows Process Activation Service service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 0 milliseconds: Run the configured recovery program.
World Wide Web Publishing Service
11/13/2014 04:06:37 PM
LogName=System
SourceName=Microsoft-Windows-Service Control Manager
EventCode=7034
EventType=2
Type=Error
ComputerName= Pxxx.xxx.com.au
TaskCategory=The operation completed successfully.
OpCode=The operation completed successfully.
RecordNumber=62444
Keywords=Classic
Message=The World Wide Web Publishing Service service terminated unexpectedly. It has done this 2 time(s).
I’m not sure where to go with this now. Any direction would be appreciated.
Thank you

Hi Davej006,
Web sites and Web applications depend on the availability of Internet Information Services (IIS) application pools. IIS application pools in turn depend on the Windows Process Activation Service (WAS). If WAS is not running or errors occur
during the startup or shutdown of an application pool, Web sites and Web applications may not be available.
And based on my understanding, if some program works sometime and does not in other times, RAM is the problem.
You could refer to the following article to troubleshoot your problem.
http://technet.microsoft.com/en-us/library/cc735271(v=ws.10).aspx
Hope it can be helpful.
Best regards,
Eric

Lync Mobile client signs out - Unknown Error- requires IIS reset on Front End

My Mobile clients are signing out on their own and do not sign back in until I reset the IIS on my front end server. i have a standard edition front end with IIS ARR as my reverse proxy.
Another issue that I have (this is sporadic) is that when a mobile device is connected to internal wifi it fails to sign and and the only way to get it back to work is to turn off wifi , sign in, and then you can turn on wifi and then it can sign in even
if wifi is on. This will work for sometime until the issue comes back again.
I would appreciate if anyone can help me resolve this issue.
Thanks

Hi,
Which version of IIS did you use? If you are deploying mobility, we recommend that you use IIS 7.5. The Lync Server Mobility Service installer sets some ASP.NET flags to improve performance. IIS 7.5 is installed by default on Windows Server 2008
R2, and the Mobility Service installer automatically changes the ASP.NET settings. If you use IIS 7.0 on Windows Server 2008, you need to manually change these settings.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Issue with Windows mobile accessing to Controller web authenticate page

I have an issue with my customer that use Windows mobile that can't access the web authentication page in the WLC using IE. The error message that it display is "The page can not be found. Website can not be authenticated". When the browser is trying to load the "https://1.1.1.1/login.html". It is workable with opera browser on the same mobile phone. I have try to regenerated the certificate in the WLC but it does not help.
WLC model is 4404, firmware version :4.2. Any one have a solution to this?

In version 4.2 on the controller SSLv2 is disabled by default. IE by default doesn't do SSLv3. Either enable SSLv2 on the controller or SSLv3 on the client.

Skype Sign In Issue with Nokia E5

Hi Friends,
I am facing skype log in problem in my mobile Nokia E5 where as via PC i can logged in successfully. Through mobile whenever i try to log in skype it shows skype sining and later on after few seconds it stop working. Plz suggest how can i resolve this issue with my Nokia E5 ?

Hi kishor12345,
To further verify, are you using the internet browser when trying to access the Skype? If so, have you tried browsing the other website wherein you need to sign in your account first before you can proceed? In case that you are using mobile data, please use Wi-Fi connection instead. You may also restart your phone by switching the phone off, take the battery out, put it back in after a few seconds and switch your phone on.
Let us know how it will go.

What can IT do to my phone with Zenprise Mobile Client

My company has just announced that for continued access to company email from personal mobile devices such iPhones, that employees must install Zenprise mobile client. I can't find very specific information on what capabilities this software provides IT, and my IT group is ignoring my questions. What I can find out seems to indicate that my iPhone can be totallly wiped if they want, and that the software reports back what apps I have installed, and it allows the administrator to collect "personal data".
I don't mind company policies requiring that I secure my device, and I don't mind them wiping just the company email if they think my phone is not secure or lost, but this application seems to go far beyond those points, giving them total control and me no privacy on my iPhone. Does anyone have any more information on Zeprise?

As KiltedTim said, if you have a corporate Exchange account on your iPhone, IT likely already has the ability to wipe the whole thing. With Zenprise, though, they will have the added ability to wipe corporate data and apps while leaving your personal stuff alone.
Yes, Zenprise will allow greater visibility into your iPhone. It will identify apps, tell them if the device is jailbroken, report on usage, etc. It can block certain apps they deem undesirable, though I don't believe the current version can actually delete a specific app unless it is INSIDE the Zenprise "container". No telling about the next release. It can provide access to just about anything on the device.
I would recommend you go through your boss and\or HR department to find out if there is an internal policy for what IT (Zenprise) will be allowed to do and not do. Is IT restricted in any way by corporate policy or will they be able to exercise all of Zenprise's features as they see fit? I'm an IT guy and we have employees sign a document which spells out exactly what they are accepting when we put corporate stuff on a privately-owned device.
Once a company allows corporate data (email, documents, etc.) on a device, IT has a responsibility to keep it safe. It may end up that the policy is "there is no expectation of privacy if corporate data is on the device and we reserve the right to do anything we want". More likely, there may be no written policy, which is basically the same thing.
The bottom line, though, is that IT will have the ability to do a lot of stuff using Zenprise (just like IT has the ability to see any photos, browser history, etc. on your corporate PC). You will need to weigh whether you're satisfied with the company's policy covering your privacy or if it isn't worth having corporate email on your iPhone.

Issue with only one client - The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed.

Below issue is with only one client in that untrusted domain. So boundary is not the issue.
Env -
mydom.com has SCCM PRI site (MP, DP as well).
Client is in untrusted forest.
Please help.
Thanks
MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteCode:         pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteVersion:      5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="pri"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
    <ADSite Name="Default-First-Site-Name"/>
    <Forest Name="staging.local"/>
    <Domain Name="staging.local"/>
    <IPAddresses>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
    </IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Received header '<Msg SchemaVersion="1.1">
<ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
<SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
<SourceHost>pri1SCCM02</SourceHost>
<TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
PM 4816 (0x12D0)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)

Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
This line jumps out at me in the log file though: "An MP exists on this machine".
That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
Jason | http://blog.configmgrftw.com | @jasonsandys

SL Server Permission Issues with Windows XP Clients

I'm running into some permissions issues with Snow Leopard Server. I know it's specific to SL Server because I have two Leopard servers and neither one is affected. All servers are set up the same way.
I'm using this SL server as a file server in the golden triangle approach: AD for Users, OD for Groups that supply AD User membership. I have one volume per OD group, and that group has read/write privileges to that volume via the default Server Admin read/write ACL. POSIX permissions are 770 on the top level directory, and ownership is set to the AD user who owns the volume, and the OD group the volume belongs to.
The client is XP SP3. When the client accesses a share on the SL server, their access is correctly granted and they can browse the share and read any files inside the share. They can copy files to the share from wherever. They can open, edit, and save files. However, they cannot rename or delete files within the share. They cannot rename folders, but can delete them. This affects all AD users regardless of the OD group they're in.
I have a few Windows 7 and Vista clients on the network, and these two OS's are not affected by this so the problem is limited to XP. If I create a user in OD, and auth to the sever from the XP client as that user, the problem goes away, so it's something to do with AD and SMB.
I do have a ticket in with Apple support, which was escalated to Engineering. Still waiting on that.
Things I have tried that have not worked/helped:
-Modify the ACL to Full Privileges
-Tried removing/re-adding user to OD group.
-Remove darwin_streams from vfs_objects in smb.conf
stream support = no
ea support = yes/no (tried both ways)
darwin_streams:brlm = no
-Added nt acl support = no to smb.conf
per http://bit.ly/6aYycW
-Animal sacrifice..... ??
Help?

I need to do more testing, but I think the fix is to add "acl check permissions = no" to the bottom of /etc/smb.conf:
; Site-specific parameters can be added below this comment.
[global]
acl check permissions = no

Sign in issue with Lync Mobile client

Similar Messages

Maybe you are looking for