@ sign on 9500

Since last week I am seeing @ sign on my 9500. Any ideas why this is appearing
Sam

Nopes, I have configured POP as well as BB on my mobile. I hardly use POP, since BB keeps poping messages.
Even though i deleted all the messages from both, it still didn't help
Sam

Similar Messages

When trying to sign out of Hotmail the "back navigation button" remains green and I have to click sign out again and the same thing happens over and over and the only way to close Hotmail is to go to File and Close Frame, so what's my problem?

When I attempt to sign out of Hot Mail by clicking "Sign Out," I get the "Sign In" instruction as I always have, however, the green Firefox navigation button remains on bright green (not going to gray) and my MSN home page will not close automatically as usual. I click on the green arrow and I get an instruction to "Sign Out" again. I click on that and get the "Sign In" again but the arrow stays green. I can repeat this countless times and never get signed out and always remaining on the MSN home page. The only way I can close is to go to File and click on Close Window and then my homepage will close and go back to desktop. I've been using Firefox for a couple of years now (IE prior to that for ten years) and have never had this problem. After using "Close Window" I go back onto my home page, from the desktop, and the navigation button is grayed out normally until I sign in again and we start the cycle over again. Have I been hacked?
== This happened ==
Every time Firefox opened
== Approximately a month ago.

I was doing a side-by-side comparison of the new and old server (we backed up the server before the reformat) and I can see that, evidently, CR XI was installed. We have the directory C:\Program Files\Common Files\Business Objects\3.0 and all the versions match what is located in the project's bin directory. Does this confirm that I did have XI installed and licensed at one time?
If I purchase a more recent version, couldn't I update the reports to use the newer version? I have all the source code.
Thanks for your help, it is a nice sanity check for me after hours of reading forums and documentation.
Also, just a shot in the dark, but I'm assuming it wouldn't do me any good to simply restore the aforementioned folder to my C drive? Would that work if I registered all the dll's?
Edited by: Eric Hollering on Dec 2, 2009 6:40 PM
To be clear, I do have VS 2003 & 2005, and I have the source code. I just have never used Crystal Reports in any of my .NET apps because the need wasn't there, so recompiling is not out of the question.
Edited by: Eric Hollering on Dec 2, 2009 6:49 PM
Also, I looked at the CrystalDecisions.CrystalReports.Engine.dll that was in the C:\Program Files\Common Files\Business Objects\3.0\Managed folder and when I right-click and view the properties, then the Version tab, in addition to the 11.0.9500.2 version number, there is a property called Product Version that has the value .NET. Does that mean that this dll was bundled with Visual Studio?
I also found this directory on the old server...does this tell you anything?
C:\Program Files\Business Objects\BusinessObjects Enterprise 11
I did see that you can still buy XI from CDW. I have a call into them currently to check with Business Objects for any registrations from my company.
Edited by: Eric Hollering on Dec 2, 2009 8:27 PM

Formula & Nokia 9500

Dear Experts,
I need people who know are both expert of phones and computer software programs. I have a developed a file in excel which has some formulas and it's working properly in PC but when I transfer my file to my Nokia 9500 one portion of the formula is not working due to syntax error. means my mobile doesn't accept the sign of ( which we use it in excel file formulas for specifying a range of creteria. So can anyone tell me if I can use another sign in mobile format which will replace ( range sign. e.g. (A1:C6)?

what is the exact problem can you let us know in detail
tongue is too confused on what to speak

Error 400 when trying to sign-in to Adobe Photoshop 9 [was:Error]

Getting an Error 400 when trying to sign-in to Adobe Photoshop 9. What is the problem?

http://barbarabrundage.com/2013/09/16/pse-8-9-10-cant-sign-in-error-404/
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Adobe Bridge CS6 for mac: export modules, facebook export module gives an error every time i try to sign in

in the export module for facebook every time i click "sign in to facebook" it gives the following error: "An error occurred while request facebook connection"

"An error occurred while request facebook connection"
The export module has been discontinued in Bridge CC and as long as it has been there the option for social media has worked only for FB in a few countries. Due to rights management (as we where told) there where restrictions for most other countries. But if it did work for you in the past you should try click on FB in export module or use the tiny menu icon in the export panel for preferences and try to set up a new connection.

Can I suppress sign in dialog box?

We are deploying Adobe CC in an enterprise setting...labs..ect. We are using the Packing Tools for deployment. However, when you start up a CC application it prompts you to sign into your creative account. We want to suppress that window when someone starts the application. We have attempted to use the Provisioning tool, however the option regsuppress=ss does not seem to disable the sign in window.
Here is the Prov command we are using:
adobe_prtk --tool=VolumeSerialize --generate --serial= --regsuppress=ss --eulasuppress --locales=en_US
No issues generating the XML file
Lab Environment
Windows 8.1
Adobe Creative Cloud Enterprise Edition

Team Installer http://forums.adobe.com/thread/1363686?tstart=0
http://helpx.adobe.com/creative-cloud/packager.html
http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

Deploying only Acrobat XI Pro CC package w/ Enterprise Serial # - Still getting "Sign In Required"

Downloaded Creative Cloud Packager to create a serialized package of only Acrobat XI Pro. I further customize the deployment via Adobe Customization Wizard XI, but did not re-enter the serial number (as suggested). I am able to deploy from the Exceptions folder with the following cmd, msiexec /i "%inst%AcroPro.msi" PATCH="%inst%Updates\AcrobatUpd11006.msp" TRANSFORMS="%inst%Transforms\en_US.mst" /qn. Upon launching Acrobat, I receive the a pop-up message, "Sign In Required. Siging in with an Adobe ID and registering Creative Cloud Membership Enterprise is required within 32767 days otherwise it will stop working." I don't understand why the serial number and Adobe ID I enterred when packaging did not carry over. Any insight would be appreciated.

Downloaded Creative Cloud Packager to create a serialized package of only Acrobat XI Pro. I further customize the deployment via Adobe Customization Wizard XI, but did not re-enter the serial number (as suggested). I am able to deploy from the Exceptions folder with the following cmd, msiexec /i "%inst%AcroPro.msi" PATCH="%inst%Updates\AcrobatUpd11006.msp" TRANSFORMS="%inst%Transforms\en_US.mst" /qn. Upon launching Acrobat, I receive the a pop-up message, "Sign In Required. Siging in with an Adobe ID and registering Creative Cloud Membership Enterprise is required within 32767 days otherwise it will stop working." I don't understand why the serial number and Adobe ID I enterred when packaging did not carry over. Any insight would be appreciated.

Can you sign a ipa created with adobe's DPS with a Apple's Enterprise developers

Now we have an app that we do not want to go through the apple store for approval and keep it in-house. And the Adobe’s enterprise is more then what any here can afford. I read somewhere that “Apple Enterprise customers can sign an app without the UDID binding”. I know here at work we have both Apple types of developer programs. So I do not understand why we cannot not use apple certifications and provisions from Apple Enterprise and make the app in the adobe cloud and then air deliver it. Has any one tried this? Any other options or thoughts are fine then the old stand by of “Join the Adobe’s enterprise”.

Have you found a workaround for this? I recently had to create one and set the ipad as a "test" ipad in order for delivery. Its the testing .ipa, but it works a temp solution. I dont understand why i need to be an enterprise user if i want to create and use my own app.

Partner application single sign-on and Oc4j

hello,
I'm trying to test portal's partner application single sign-on, following the examples inside the "Oracle9 iAS Single Sign-On Application Developers Guide":
With Tomcat as jsp engine everything works fine, but with Oc4j when I try to enter the protected jsp page i have this exception:
oracle.security.sso.enabler.SSOEnablerException: java.lang.IllegalStateException: OutputStream already retrieved
     at SSOEnablerBean.getSSOUserInfo(SSOEnablerBean.java:153)
     at SSOEnablerJspBean.getSSOUserInfo(SSOEnablerJspBean.java:57)
     at /protetta.jsp._jspService(/protetta.jsp.java:37) (JSP page line 4)
Any suggestion?
Thanks in advance.

I get the same problem with my partner application. It runs fine on JServer but I get the following problem on oc4j:
oracle.security.sso.enabler.SSOEnablerException: java.lang.IllegalStateException: OutputStream already retrieved
at oracle.br.aerochain.sso.SSOEnablerBean.getSSOUserInfo(SSOEnablerBean.java, Compiled Code)
at oracle.br.aerochain.sso.SSOEnablerJspBean.getSSOUserInfo(SSOEnablerJspBean.java, Compiled Code)
at /jsp/papp.jsp._jspService(/jsp/papp.jsp.java, Compiled Code)
at com.orionserver[Oracle9iAS (9.0.2.0.0) Containers for J2EE].http.OrionHttpJspPage.service(OrionHttpJspPage.java, Compiled Code)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpApplication.serviceJSP(HttpApplication.java, Compiled Code)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.JSPServlet.service(JSPServlet.java, Compiled Code)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java, Compiled Code)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java, Compiled Code)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java, Compiled Code)     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java, Compiled Code)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java, Compiled Code)
Did anyone get a solution for this?
TIA

My phone wont let me download anything even free stuff or update.it keep saying something wrong with my billing info so i fix it but still cant download.I signed out sign back in still nothing please help i'm getting angry

My phone wont let me download anything even free stuff or update.it keep saying something wrong with my billing info so i fix it but still cant download.I signed out sign back in still nothing please help i'm getting angry

If it says your billing info is wrong that means that your credit card issuer is refusing to approve your account. You will have to solve the problem with your bank or credit card company.

Recently my phone updated itself to ios 7, it wont let me sign into my iphone app store to download apps,i click on an app i want it just clicks but doesn't start to download any help?

recently my phone updated to ios 7, it wont let me sign into my iphone app store to download apps,i click on an app i want and it just clicks but doesn't start to download, i can see thats its not signed in so i tried to re set up my account under the app store in settings , but its just a grey area and wont let me click to input any information. this happened right after i updated my phone, any help?

Hi SarahHannah,
If you are having trouble activating iMessage, this article contains relevant troubleshooting steps:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Take care,
- Ari

When I login on my When I sign in to a site on my ipad using my email address as ID a short cut of my email address comes up. How can I get rid of it?

When I sign in to a site on my iPad using my email address as ID a short cut of my email address comes up. How can I get rid of it?

You can edit keyboard shortcuts in Settings>General>Keyboard>Shortcuts>Edit.

How to sign in? (problem with username and/or password)

I created an account long ago for the Support Communities with an Apple ID: xxx.mac.com.
I created an account not so long ago for iTunes with an Apple ID: xxx.gmail.com.
Where they suppost to be the same? Wasn't sure. In any event, I've been using them both without a hitch. Then I realized that I could have a password recovery problem with my Support Communities account because I haven't had the xxx.mac.com email address for several years now.
Problem: When I use my older Apple ID for Support Communities, it will not allow me to change my email to my current xxx.gmail.com address. I suspect it recognizes the address is already being used with me newer Apple ID for iTunes. My solution was to simply ditch the older ID and try signing in with my newer ID. Unfortunately with that route, I get:
"We're sorry. Your account could not be created due to system issues. Please contact Apple Support Communities with the information below to create your account." [Which I've done, but no response.]
Questions: Are the ID support to be the same or different? Either way, it doesn't really matter to me, but I either need to update my address for the older ID or be able to use my newer ID in Support Communities. Because of this, I'm unable to use any type of email notification and I'm afraid I could have a problem with password recovery if I were in that position.
Thanks for any comments.

Problem solved and completely my error.
My login with the old Apple Discussions was [email protected] At some point, with the new Apple Support Communities, some time ago, I was prombed to create a new account and I did so. My username was simply "xxx" without the "@mac.com".
So that was the problem. My old [email protected] still had my old address. I kept logging in with this ID and kept trying to update my address. Where I thought it was recognizing that this address was already used with my iTunes account, it was because it was used with my newer Support Communities ID (xxx) that I didn't even remember I had created.
Turned out it was something so simple. (I hate when that happens.) I had to play my "idiot card".
Thanks to Apple support for the direct email correspondence that finally got me on the right track.

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

What file format did you export it to?

HT4623 while updating i ios7 in my ipad i counter a problem that it showed its ready to install and aftr 10 minutes a sign of itunes with usb plug in appears its there till 2 hr what to to do now i have open and close several times nuthing happens

please find the solution while updating every thing went smoothly untill aftr 20 mins a sign of itunes and usb port appear and its not going what to do ..even i have connected to my computer and switched off the antivirus and firwall as well

Something went wrong with your update; you are in Recovery Mode.
Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You need to be patient and repeat the above many times to recover your iPad

@ sign on 9500

Similar Messages

Maybe you are looking for