Sign on and off AIM then error message
I am trying to to sign on to AIM (it has worked many times before) and suddenly it started signing me on and off really fast like a couple times in a row and then an error message would come up saying "you have attempted to login too often in a short period of time. Wait a few minutes before trying to login again". I read another post similar to mine but I tried changing the port to 443 like the reply said but it is still not letting me sign on. Please Help!!
Hi Tomas,
Two DHCP Servers = Bad Networking
That Model does not get listed on the UK Site http://www.thomson-broadband.co.uk/codepages/content3.asp?c=7
The DHCP server should be Off in the Speedtouch and the Netgear should be asking for a Specific (Static IP) from the Speedtouch
This means you will need the DNS servers from the ISP.
Hopefully you have firmware that gives you a screen like this
Also go here http://flickr.com/photos/90943061@N00/97303888/in/photostream/ Click the far right pic of the two on the right to move them through those tabs opened up and the UPnP setting it should also be doing.
You will see I had a 500 series and that it was at firmware 4.2.5
The Netgear I have has the settings for how it connects to the previous device in the Basic Setting menu item. It lists os has a place to list the DNS svers here as well.
10:01 PM Tuesday; November 13, 2007
Similar Messages
-
HT201274 Everything deleted off iphone/then error message/ how to restore as new iphone?
everything deleted off iphone / then got error message / how do I restore iphone? as if from new?
hi go into "settings"
"general" scroll down to the bottom of page were you see option to "reset"
you then have several options:
reset all settings (this optionmwill reset your phone to like new)
erase all contents and settings ( this option gives you the option to put your apple id & retrieve data you may have backed up). -
This is a question for a mini iPad...
I am trying to download an app and keep getting this error message: "Could not sign in. An unknown error has occurred. I have tried shutting down and restarting. I've tried changing the password. I get the error message with free and not free apps. Any suggestions on how to fix?Reports are that this is a problem with the iTunes Store that they're working on. Some people have had success after signing out of their account and back in. If that doesn't work for you, wait a few hours or perhaps until tomorrow and by then they may have the problem sorted out.
Regards. -
Installing the latest update on my iPad - error message saying the iPad couldn't synchronize because of an internal error, and then - error message (OxE8004017) when trying to save, and then (2003) when trying to restore - nothing works anymore - On my iPad the only thing I see is a connector cord to iTunes and nothing else.
What can I do ???Same issue for me, recently I started having issues with apps no longer being able to access my Facebook account. But the iPad Facebook account settings will not accept my password, even though the Facebook app and Safari can access my account fine. The only significant events I recall that have occurred that may have triggered this have been that via my Facebook account I killed off a lot of so called authorised connections and I changed my user name, but still have the same email address and password.
I have tried just about every solution put forward on the net, short of a factory restore, back to new, on my iPad.
I have also; deleted my iCloud account, deleted the Facebook app and account, deleted Safari data.
One would think that after I have deleted my account from the iPad that it would ask for both username/email address and password, but it only asks for password, so the username is still stored somewhere that I am unable to delete.
I also see that no one seems to have been able to get an answer from Apple. So I'm guessing they have absolutely no idea themselves.
I am hesitant to put my username on Facebook back to what it was as Facebook only give you a few chances to change your username, then you are locked.
I have iOS 7.1.1 installed.
I did have a lot of respect for Apple and their devices as they just worked, but they are becoming tarnished by ignoring what seems to be a growing issue. -
pls help my iphone 4 was on activation "required". i jailbroke it then it worked but some of the applications were crashing down,won't open. i tried a lot of tutorials and then error message 3194 came out. stucked in recovery mode,and then i use snowbreeze and then it worked!!!! but another problem came, i turned off my iphone then i switched it on again then it stucked in apple logo,.after doing some thing again 1604, 1600 bla bla bla came out..pls help me fix my iphone.
no help for jailbroken phones here-it's not allowed. good luck.
-
Trying to sign into my account, it cannot sign me in and it gives me error message 5002
HELP. when trying to sign into my account, it tells me it cannot sign me in and it gives me error message 5002
go to
https://iforgot.apple.com/password/verify/appleid?language=US-EN&returnURL=https ://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa&app_id=93&app_type=ext
and anter your apple is and then go to your main id and reset -
I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?
Same issue here, previously did work perfectly
-
hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!
That's definitely enough to start.
It sure seems like it should work...and then I saw that you're using a router. It could very well be that the router is the weak link here.
Instead connecting to your network router, try using a direct USB connection from your MBP. If that doesn't work, you read this post, which may be relevant to your problem:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Scanning-from-Mac-10-7-fa ils-after-all-recommendations-Not-ready/td-p/1287003
It seems you're up to date with software. Post with your results. -
Trying to load photos off a SD Card and I get an error message "Unreadable files: 185.
Question-- Trying to load photos off a SD card and I get an error message "Unreadable files: 185"
Also an error message previously "Your start up disk is almost full . Where do I go to delete some files?How big is your HD? How much free space on it?
-
Why won't my videos play? They start on the device that they are on, then stop and I get an error message...An error occured loading this content. This comes up on all of my computers. I reset the Apple TV to Factory Settings and still get the same message.
Hi There,
I had the same problem took me several hours to try and sort it out but nothing worked.
I then went to the following apple link
http://support.apple.com/kb/TS5376
Follow everything to a T and you will get the use of your Itunes again.
Hope this helps. Good luck (And remember to breath lol ) -
Help. I tried to open my Illustrator CS6 today and got the following error message, "To open Adobe Illustrator CS6 you need to install the legacy Java SE runtime". The window then states, "Click More info...to visit the legacy Java SE 6 download website." I do click on the More Info... button, but the webpage is blank. Please help.
Thanks,
LeoLeo,
Depending on your OS, you should be able to use;
Win:
http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase6-419 409.html
Mac:
http://support.apple.com/kb/DL1572
Some have found that the page may turn up blank to start with, so it may be necessary to reload the page.
Others have found that it may depend on browser. Specifically, a switch from Safari has solved it in one case. -
I have a macbook from early 2008, and when I sign onto safari I get an error message for fast browser search plugin. After that error comes up my computer freezes and I have to force it to shut down. Does anyone know what that means and how I can fix it?
Means you have an incompatible Safari extension installed. Look in the /Home/Library/Safari/Extensions/ folder for the offending plug-in and delete it.
-
Safari tries repeatedly to open a page. The page partially opens but then Safari reports that there's something wrong with page and I get an error message. This is happening at too many web sites for one site to be having issues.
I have a similar problem, Safari cannot load a complet page. It stalls e.g. ["38 of 42"]. sometimes it will complete loading after a long wait. just as often it will never complete the page,
The same thing happens in chrome and firefox but safari on my iPad works just fine.
I have the latest version of everything
I assume there is a system problem but cleaning up permissions does not help -
i'm trying to open samsung pc studio and it givesme an error message and windows then tells me my flash player is incompatible with my system...this after i've downloaded the flash player im told is compatible with my system
In general, when desktop software is using Flash Player, it's because they're embedding an Internet Explorer window in the application. If you don't have Flash Player for Internet Explorer (aka. the ActiveX Flash Player) installed, then the desktop application isn't going to work.
So, fire up Internet Explorer
Go here: http://get.adobe.com/flashplayer/
Follow the prompts, and then re-launch the application after you've completed the installation in IE. Hopefully that sorts it out for you. -
OS X Lion begins installing and then error message comes up that it can't be installed on MacIntosh HD because a recovery system can't be created. What do I do to fix this problem?
What to do if the installer warns that no Recovery HD can be created
Some disk partition configurations may result in the OS X Lion installer reporting that it could not create a Recovery HD. In these situations, even if you are permitted to continue the install, you should quit the install and create an external, bootable OS X Lion hard drive with a Recovery HD, first. You will be able to return to the upgrade to OS X Lion on your computer's boot drive after creating the external Recovery HD.
Important notes
Your storage device must have at least 13 GB available (after formatting) to install Lion and an Internet Restore partition.
These steps will erase and reformat the storage device. OS X Lion: About Lion Recovery will instruct you on setting up the storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install Lion and an Internet Restore partition on your external storage device. You should back up any important files that are on the device to a different drive.
This procedure will install a version of the OS X Lion that is compatible with the Mac it was created with. Using this Lion system with a different kind of Mac may produce unpredictable results.
Your computer's serial number will be sent to Apple to help authenticate your request to download and install OS X Lion.
Maybe you are looking for
-
"Alternate path to a folder containing the installation package 'iTunes.msi'"
Trying to upgrade my iTunes for my new IPod Touch(32GB). It needs a newer version than I have. When running the installer, it must remove the old iTunes first, I assume. This is what I receive: "The feature you are trying to use is on a network reso
-
HP C7280 all-in-one duplex printing problem - Long and short sided binding!
I use a HP 7280 all-in-one printer and have the duplexer attached. Up to installing snow leopard I have been able to print two sided documents from ipages no problems. But now every time I try to print a two sided document in flips the second side ve
-
Hi I am experiencing a strange issue with a text box, with text in it, was hoping that some one may have some idea's as to why? I create a new document that has a rectangle in it, I save the doc, then I add a text field and text via script , in this
-
ACs For Windows 4.1.(1) build 23
Hi. We´ve got two Windows 2003 Server R2 machines, with installed Cisco ACS For Windows 4.1.(1) Build 23 used for RADIUS users authentication and now days we´re trying to deploy now a TACACS+ configuration to the network device manage now from those
-
Does anyone know how I can make a script replace an entire batch of hyperlinks in MS Excel? Using the "Replace" command doesn't find them (although it would if I could figure out how to have my hyperlinks in a formula in the cell itself). I need hype