Sign on revenue items showing wrong.

while reconciling COPA to FI the sign on the revenue items (pricing conditions) is hitting COPA is not correct. It is not showing for all but only for some.

Hi,
check SAPNET note 33178 and note 52849 to understand whats going on.
Check your KE4I settings.
Best regards, Christian

Similar Messages

Why does my iPad store show wrong id

In my settings, it shows the right Id. When I go into store to get items or updates, it shows wrong id. How do I fix this?

If you purchased apps with a different Apple ID, you will always have to use that ID in order to update the apps.
If that's not what is happening to you, I don't know what the device would be showing an ID that does not belong to you, unless somebody else used their ID on your iPad. Try swiping to the bottom of the app store featured tab and tap on the Apple ID that is showing in there. Sign out of that ID and sign into yours.

Can't login, shows wrong password.

hello everyone,
I'm using my skype account many years, and 30 minutes ago my skype closes and i was try to login again, but it shows wrong password, than i was going to reset new password, but mistake.. there was message something about .. i need to contact with skype support... i realy need my skype account back, beacuse i have many business people there and do this without reason i think its not the best skype idea.
What i must do to get back my skype account...?
Thank you!

Greetings,
Password-related matters must be resolved by Skype Customer Service; we here in the Community are not authorized to access Skype accountholder data. Although it may seem silly to do so, if you are locked out of your account, you will need to create a new account in order to contact Skype Customer Service.
Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
You will need to proceed through each step, one at a time. Sign on to the Skype website as requested. Choose the subject and topic which most closely matches the item you need assistance with. Then, continue past Step 2 of the instruction where several articles from the FAQ library will appear for you to review, and proceed to Step 3, Continue Support Request (the blue "button" appears at the lower right corner of the website page). You may also skip through Step 4 where you will be referred back here to the Community; no need to do this as the Community is where you started. When you complete the webform and click Submit, your information is relayed to Skype and you will receive a reply via e-mail.
If you are a Skype Premium or other eligible customer, you will be routed to start an instant message chat session with a Customer Service agent.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

HT5622 I wrongly entered my apple id into my new i phone . It was my e mail address with a letter wrong I have registered right on the i cloud account but when I go to get apps it still shows wrong e mail How do I delete this incorrect e mail Thanks Mike

I wrongly entered my apple id into my new i phone . It was my e mail address with a letter wrong
I have registered correctly on the i cloud account but when I go to get apps it still shows wrong e mail
How do I delete this incorrect e mail? Thanks Mike

settings - app/itunes store - sign out - sign back in.

FBL5N t code and BSEG table is showing wrong contract number

Hi,
The proces flow is contract number>sales order>DMR-->Invoice
Now when I am checking the VBFA table it's showing correct contract number against invoices but FBL5N t code and BSEG table are showing wrong contract numbers.
Why FBL5N and BSEG table is showing wrong contract number?
Currently we are using one enhancement and user exit is used to incorporate one customized field as identifier for bill type.
1. During the billing document release to accounting VFX3, The user exit triggering and it is update the customized fields and Net settlement indicator.
2. Using the Invoice number, get the fields VGBEL(Document number of the reference document) and VGPOS (Item number of the reference item) from VBRP and read table VBAP with VBELN and POSNR, to get DMR number (Sales Document) that created for the Invoice.
3. Use fields VGBEL and VGPOS on table VBAP to get the sale order number.
4. By using the Sales order number, get the Distribution channel to update Net indicator field
In accounting table BSEG-UZAWE = JF must be updated on the customer line.
5. Retrieve the sale order number and item level to get customized field from table VBAP
Any pointers.
Thanks
Ashu

Hi Reazuddin,
Thanks for your reply,
I am concercerned about BSEG table and using user exit EXIT_SAPLV60B_008 to post the document in FI.
Now in we have enhanced this user exit for contracts and included in this way.
SELECT SINGLE ZZ_CONTRACT FROM VBAK INTO (LC_CONTRACT) WHERE VBELN EQ cvbrp-vgbel.
Endloop.
*Moving the values to final accounting table
loop at xaccit.
xaccit-vertn = lc_contract.
xaccit-VBEL2 = xaccit-AUBEL.
xaccit-xref3 = lc_vbel2.
MODIFY xaccit .
ENDLOOP.
Clear: lc_contract,lc_vgbel,lc_vgpos,lc_vbel2.
But I am getting correct data when checked other clients( development and quality), this problem I am getting in production.
Do I need to ask the ABAP'er to debug this enhancement in production?
Thanks
Ashutosh

Prime shows wrong cli credentials but they are good

Hey!
Prime discovered both Nexus 7k Core Router. All fine...
On the first one Prime is getting all informations with entered CLI credentials in the device work centre.
On the second Nexus it always shows "wrong cli credentials" but they are 100% correct.
Login into the second Nexus via putty and the same credentials is also fine.
I can't convince Prime tocollect the Informations from the second Nexus.
Even ssh from prime cli to this device ist ok...
Any ideas?

ok, tried all that was said here. Nothing worked ... I do have banners, but no # sign ... removed them anyways ... then thinking about the banners might be causing issues for what PI expects ... (i do have my prompts changed to mask the platform) ... so i defaulted back to regular prompts ... WORKED !!!!
So here is what works for me ... no banners, no custom prompts AND device added through the 'classic theme'.
I presume the expectation is that the device begins with minimal config ... the rest is pushed through the config templates deployment. But have the developers thought of existing devices ? is it IOS version related (target device) or simply a bug.
BTW, PI v2.1
Edit --- needing to clarify, for some models (namely UC520) ... removed banner, custom prompts and i could add it comfortably through the Lifecycle interface.
Others (3550), could be inserted easily with banners and custom prompts ... rather inconsistent, though at least , i have working recipes.
Thanks for the help all :)

Problems with Sharepoint 2010 view if group by and collapsed is activated - all items show up within each group!

Hi there,
we have a Sharepoint 2010 Enterprise environment where we use some lists for new feature ideas.
These lists should be grouped by a certain coloums. If we keep the default view with expanded groups, only the items which should be inside a certain group will be displayed (the count is for example 7 and inside the group there are only 7 items).
As there are a lot of groups inside the list we would like to create a new standard view with all groups collapsed. But as soon as we change the view, all groups contain ALL items from the list (what makes it really strange is that the count is still 7 but
a couple of hundred items are inside the group even the ones which should have been filtered by the "group by" settings.
I enclosed two pictures where you can see the difference between "collapsed" and "expanded" view (Group by settings!)
Is this a bug or is there something wrong with our views/installation?
Thanks for any help (by the way: i just installed the CU from April 2012 which didn't make any difference!)
Greetings
Jens
"Collapsed View":
"Expanded View":

Hi ,
I understand that when you create a new standard view with group by BDE ,and all items show up when collapse is activated .I cannot reproduce your issue .This is not a bug .You should try to edit the view in browser multiple times to have a test whether
it is showing correctly now .If this view is still not working ,you can try the workaround below :
Open the Site in SharePoint Designer .
Open the list and create a new view .Make the view as the default view .
Edit the view in Advanced Mode . Click in the xsltlistview web part and Click Sort&Group in the ribbon .
You can add Group by here .After making all the changes ,save and preview the view in browser .
Thanks
Entan Ming
TechNet Community Support

Issue: - FBL1N - is showing wrong values

Issue: - FBL1N - is showing wrong values
Hi SAP experts,
We are executing T Code FBL1N and selecting all open enteries, and select all items like special normal items, G/L Transaction, noted items, parked items and customer items, we found that the balance is showing wrong for intercompany vendors.
For Ex, if vendor is not created in company Code A and customer items are available in Company Code A then that items are coming for some line items and for some line items it is not?
I have attached one example for the same. for all vendors data is coming properly but for indivisual vendor is it not.
Please suggest why?
Regards,
Vijay

Example :
Vendor number 99 ans for the same customer nO is C12 is created in company code ABC but vendor is not created and customer C12 is in PQR, now i am executing fbl1n for Company Code PQR for open item selecting all options like normal items, special G/L transaction, customer items noted items and parked items, the line items related to Vendor number 99 for company Code PQR should not display, as vendor is not created but customer items are there, please let me know for some cases it is showing result and in same cases it is not why?
Regards,
Vijay

Resource Department is showing wrong in SharePoint 2010

Hello All,
I have one Application which is In-house application (created by our developers) and this is running and hosted on SharePoint 2010. My concern is this I have one user in my application and her Department and Title is showing wrong in site collection. I have
deleted the user from site collection (UIL) and then try to add her name again but still her information is showing wrong. I have checked in Active Directory and all the information is correct there.
Please help me to resolve this issue. Any help will be greatly appreciated.
Many Thanks

Thanks Devendra for your suggestion, but not that much good in codes. Can you please tell me what should I change in the below code to update the fields.
function Sync-SPUser([string]$userName, [string]$title) {
Get-SPSite -Limit All | foreach {
$web = $_.RootWeb
if ($_.WebApplication.UseClaimsAuthentication) {
$claim = New-SPClaimsPrincipal $userName -IdentityType WindowsSamAccountName
$user = $web | Get-SPUser -Identity $claim -ErrorAction SilentlyContinue
} else {
$user = $web | Get-SPUser -Identity $userName -ErrorAction SilentlyContinue
if ($user -ne $null) {
$web | Set-SPUser -Identity $user -SyncFromAD
$list = $web.Lists["User Information List"]
$query = New-Object Microsoft.SharePoint.SPQuery
$query.Query = "<Where><Eq><FieldRef Name='Name' /><Value Type='Text'>$userName</Value></Eq></Where>"
foreach ($item in $list.GetItems($query)) {
$item["JobTitle"] = $title
$item.SystemUpdate()
$web.Dispose()
$_.Dispose()
Appreciate your response on this.

Activity monitor shows wrong disc space

why does activity monitor shows wrong disc space after delating items still look as if they are there

See:
Where did my Disk Space go?
What are Local Snapshots?

LR 5.3 showing wrong thumbnails

I have been running LR 5.3 smoothly for a while but a couple of minutes ago LR started to show wrong thumbnails, it shows thumbnails from a delete Snapshot. I have tried purging my cache but nothing happens. I have upgraded from LR 3 to LR 3.5 Ideas ? This is my system:
Lightroom version: 5.3 [938183]
Operating system: Windows 7 Home Premium Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Logical processor count: 2
Processor speed: 1.9 GHz
Built-in memory: 3003.1 MB
Real memory available to Lightroom: 3003.1 MB
Real memory used by Lightroom: 912.9 MB (30.4%)
Virtual memory used by Lightroom: 901.7 MB
Memory cache size: 364.0 MB
Maximum thread count used by Camera Raw: 2
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1366x768
Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.3
Library Path: C:\Users\User\Pictures\Lightroom\Lightroom 5 Catalog.lrcat
Settings Folder: C:\Users\User\AppData\Roaming\Adobe\Lightroom
Installed Plugins:
1) 500px
2) Behance
3) Canon Tether Plugin
4) Facebook
5) Flickr
6) Leica Tether Plugin
7) Nikon Tether Plugin
8) SmugMug
Config.lua flags: None
Adapter #1: Vendor : 8086
    Device : 2a42
    Subsystem : 360b103c
    Revision : 7
    Video Memory : 64
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Speakers (Conexant High Definition SmartAudio 221)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: LR5x89
CardID: 10818
Direct2DEnabled: false
GPUDevice: D3D
MaxTexture2DSize: 8192
OGLEnabled: true
Renderer: Mobile Intel(R) 4 Series Express Chipset Family
ShaderModel: 10.0
Vendor: Intel
VendorID: 32902
Version: 8086:2a42:360b103c:0007

I have had this problem also ever since I updated to 5.3, I think it is a major bug!
At random the preview window on the left doesnt show the preview of the presets anymore when I hover them, and when I click back and forth to other images it suddenly starts working again, its a very annoying problem and I cannot believe that Adobe isnt aware of it yet!
Marcel

"Invoice History Report "show wrong balance for supplier invoice with USD

Invoice History Report show wrong balance for supplier invoice with USD Currency
After I run this report i see in the last of this report there is difference between the supplier total
USD (Currency ) and the open Balance USD , it is decreased the open balance
for supplier with 2300 USD with out any reasons
bellow is some data copy of the report
======================================================
Supplier Site Total: SAR 34,700.00
Supplier Site Total: USD 39,000.00
Supplier Total: SAR 34,700.00
Supplier Total: USD 39,000.00
Open Balance: SAR 34,700.00
Open Balance: USD 36,700.00
*** End of Report ***
==============================================
please advise me from where can this differenc ( 39000 - 36,700=2300 )COMMING
or it is bug in this report , becuase i compare this report with other report in account payable like
-supplier open balance letter
-invoice register report
-invoice aging report
all this report give me the amount for supplier USD =39000
BUT AGIN FROM WHERE THE SYSTEM DECREASED THE AMOUNT TO 36,700
thanks

Can you try running Create Accounting For payments just before you run the Invoice History Report and re-check .
Thanks

Iphone 4 showing wrong IP address for home wireless

2 days ago we reset our home wireless password and updated our devices (ipad, laptop, and two cell phones). Now my iphone 4 will no longer connet to the wireless. It accepts the new password to join the network but it never connects. It is showing wrong IP address. How can I change it to the correct IP ? Tried hard rest, forget network, and renew lease all trying to get it to automatically update the info. Out of ideas. Any suggestions?

I have the exact same router as you, I have Comcast, and I am having the exact same INFURIATING problem.
Comcast and Apple have no ideas. Linksys tells me I am having a router problem.
I even went so far as to buy a new router and modem from Linksys (as they claim they no longer make the router/modem combo because it doesn't work well). I still don't buy this... my PC, my PS3, my DS... all of them connect to the router perfectly.
I have the new modem and router here and planned to give that a whirl tonight but Comcast was being difficult and saying it could take 72 hours to activate my new modem. Totally unsat. I had them reconnect the WCG200 and I am still trouble shooting to no avail...
If anyone finds a fix (short of a new router and new modem)... please post!

I recently changed my e-mail address and have made the changes in my Apple account. But when I try to purchase an app from the App Store on my ipad, the sign in cue still shows my old e-mail address rather than my new one.

Hi there. I am having difficulty buying apps from the App Store. I recently changed my e-mail associated with my apple account. when i try to purchase an app, the cue to sign in does not show my new e-mail, but still shows my old e-mail. when I put in my password, it does not work because my password is no longer associated with the old e-mail address. i don't understand why my old e-mail still shows up. Can someone help me?

Hello there, loupar.
The following Knowledge Base article offers up just how to change your Apple ID for the App Store on your iOS device:
iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht1311
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Commitment item updated wrongly

Hi friends
I have a doubt in funds management budget control suystem
at the time of creating PO - No problem (FM account assignment is providing me correct commitment item and Fundscenter)
Below is the scenario
I have assigned commitment item - "INV" for the inventory FI-GL account and it is populated in PO - correctly
when i do the GRN i get
Inventory account Debited with commitement item "INV" (correctly)
GR/IR account credited with commitemnt item "INV" (wrongly)
for the GR/IR line item I want commitment "GR/IR" to get populated instead of commitment tem "INV"
In the GR/IR GL account I have assigned commitment item "GR/IR"
if so why am I getting commitment item "INV" instead of commitment item "GR/IR"
where is the problem please please can you help me by answering this
P.S
the commitment item "INV" is with 30/3 Combination
the commitment item "GR/IR" is with 40/3 combination
Thank you & Kindest Regards
Srikaanth

Hi, before posting use search, this question discussed.
\You can't substitute CI for GR/IR account during GR, it populate from Dr account(from PO)

Sign on revenue items showing wrong.

Similar Messages

Maybe you are looking for