Signal analysing program faces different signal processing errors while the mentioned settings in the error solutions are correct!!

I am trying to get 4 signals from my bluetooth which is connected to a sensor. later on I need to analyze the signals for calculating heart beat and blood oxygen saturation. when the labview reads the data it has no errors but anyway the peak detecor doesnt work. my sampling rate is 100. anyway I get different signal processing errors like 20023 and 20037 and 20041, 20015. but when i check the solutions for the errors, they dont help me at all. like error 20023 complains about low and high cut of frequency while mine is set correctly could you please check it for me
Attachments:
shift final - Copy.vi ‏458 KB

Mistaken wiring here- after BD Cleanup (Ctrl-U)
Error -20037 occurred at an unidentified location
Possible reason(s):
Analysis: The number of data points in the Y value array must be greater than the order value.
Jeff

Similar Messages

My Mail program has gone south on Leopard on my 27-month old Macbook. I can't send, even though the server details are correct. I tried reinstalling from the install DVD - but no go: no longer compatible, evidently.. What to do?

My Mail program has gone south on Leopard on my 27-month old Macbook. I can't send, even though the server details are correct. I tried reinstalling the Mail program from the install DVD, but no go; apparently that two-year old Mail is no longer compatible with my up-to-date Leopard. I tried deleting the account (hotmail) from Mail and setting up a different account (Yahoo). After loading all the inbox two things happened: first, I still couldn't send, and second, when I closed the Mail window the whole inbox then disappeared and doesn't come back. Although I couldn't reinstall the Mail program from the install DVD, would it still be possible to reinstall the whole system from that DVD? If I do, will I lose files or will there be another problem since that DVD is now over two years old?
Thanks for any suggestions; they will be much appreciated.
P.S. I've just noticed that now I can't change the desktop picture: I go through the motions in Preferences, but the new picture doesn't appear on the desktop. Is there a systemic problem?

You are waiting for an apology to something that happened over a year ago? Really? This is why there is a manager in the store. You have a problem with an employee you speak to the manager. Just like you did on the phone. You would have gotten your apology in July 2013.
Here is the information about your upgrade fee.
Upgrade Fee
It is because when you have a problem you (customers) go running to the store and want to take up the time of the reps to fix it. Other carriers have third parties that deal with technical support and those locations are few and far between. VZW provides this directly through their stores. Also, when you subsidize a $650 and pay $200 VZW has to pay $400. Your monthly service fee doesn't begin to scratch the surface of paying that back. Not with all the money that is put into the network and its improvements.
Then over a year later you get someone on the phone who apologized and offered to waive the fee on your phone and you didn't take it? That offer won't come down the pike again.
One thing you should know is that all these employees are people and as such they sometimes come off cross. I doubt that you speak to everyone so sweetly all the time. Cut them a little slack and put this whole thing behind you after 15 months. Either upgrade with VZW or move on.

I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

Which operating system?
If I recall, some features were not fully supported on XP.
Nancy O.

What causes signal processing error 20352 and how can I get rid of it?

I'm using a lowpass filter express vi with a dynamic data input and have been getting a warning number 20352 from the error output node. The documentation states the following about this warning number: Current and previous waveforms are not contiguous. Can someone tell me what this means, if it is significant and how I can eliminate the warning?

Are you trying to filter just one waveform or are you combining multiple waveforms together before passing it through the filter? A discontinuous waveform would be one with missing time information...like a skip in the data that could result from adding two together. OR...Possibly it is two waveforms with different delta T's that have been added together and "coerced".
-Brett

What is the difference between signal processing tooklit and the advanced signal processing tooklit

Hi
I am work on a project with Labview 7.1 now and want to calculate the FFT based on
the Welch method. In my full version Labview, there is a signal processing tooklit
I install it but did not found that welch.vi. Is it means that except for signal processing
tooklit, there is another advanced one and I should pay more money for it, Or,
Should I update my Labview version to 8.0 and the software will support the tooklit?
Thanks a lot!

Hi dec04009 ,
When you say "Signal Processing toolkit", do you mean the Signal Processing Palette, that is included in LabVIEW Full?
LabVIEW has signal processing VI's, those are supported in later versions, like 8.0 or 8.2. Since LabVIEW 8.0 there were added many new mathematical functions. Take a look at this:
http://zone.ni.com/devzone/conceptd.nsf/webmain/bf49f9b8951a89f3862571840057b2c7
The Advanced Signal Processing Toolkit, has advanced features, like wavelets analysis, JTFA
http://sine.ni.com/nips/cds/view/p/lang/es/nid/1395
I'm not familiar with the Welch Method, but I found this in the functions of the LabVIEW 8.2:
http://zone.ni.com/reference/en-XX/help/371361B-01/lvanls/welch/
Hope this help.
Tania Lozoya

HT204408 Why is FaceTime telling me there is "an error processing registration" when the troubleshoot resolutions are irrelevant?

I am trying to use FaceTime on my MacBook with Lion and it lets me sign in, asks me to verify my email, and then bounces back, saying "there was an error processing registration. Try again later." I have even tried with a different AppleID and new email to have verified, still the same result.
The Apple resolutions are
Resolution
If third-party firewall software is installed, it needs to be configured to allow connections from apple.com and verisign.com.
If you have edited your /private/etc/hosts file, you will need to remove or comment out any entries containing apple.com or verisign.com. To comment them out, put a "#" character (without quotes) and a space at the start of any line containing apple.com or verisign.com. Note: Some third-party software installers may modify the hosts file without alerting you.
Make sure the date and time are set correctly on your computer. You can enable "Set date and time automatically" in the Date and Time preference pane to automatically keep this information accurate. FaceTime uses SSL connections in order to register, and SSL requires an accurate date and time for securely communicating with the registration server.
None of this is relevant because I have altered none of this, atleast not intentionally. Any suggestions?
FaceTime was working just fine on my Mac a few months ago, now it is only working on my iPhone.
link to apple troubleshoot for issue

While this may be a work around for you, it is most certainly NOT the case that you need a seperate, unique Apple ID for every Apple device you own. There is clearly a bug in FaceTime that is causing problems for users, but creating multiple Apple accounts will only lead to complications later — especially if you use different accounts to purchase apps or other content from iTunes.
I suggest you take the offending device(s) to your AppleStore and get someone to help you out. This is (usually) a free service offered by Apple.
Meanwhile, Apple might lend a hand by focusing on ironing out the bugs from their network services. Network / web services have always been an Achillies heel for Apple, which has consistently had problems with its web / cloud-based services. At hardware solutions Apple is pure genius, but at web and cloud services it truly *****! Lets hope they eventually wake up to the fact that this is detrimental to users' experience of their lovely hardware.

How to show processing screen while the submitted request is in progress?

Hi SIM Experts,
I have couple of requirements in SIM7.1.1.9, i.e.
1. Whenever i submit a request, i need to show a *'Processing Screen'* (i.e. form indicating that my request is in progress) when my request is in progress.
2. Once my request is completed, i need to switch back from *'Processing Screen'* to form from where request has been submitted.
For Example:
1. When i click on *'Search'* with some search criteria in say *'Search Users Form'*, system will take some time to fetch the search results. During this processing time, i need to show a *'Processing Screen'* to the end user.
2. Once *'Search Users Form'* is ready with its search results, i need to switch back from *'Processing Screen'* to *'Search Users Form'*.
I feel challenge is keeping track on the submitted request and switching back to the requested page.
FYI, i was trying to implement this using SIM7.1.1.9 Workflows & Forms and couldn't able to get a solution.
Any help makes my tasks to move ahead. Thanks in advance.
Mahi

Hi,
Did you managed to solve the issue? I am into the same issue.
The same question..Did you got any answer for this?
How to use <div id='processing' --- --- ----> tag info in IDM Form?
What I did so far is..
I defined a js function and copied to /includes folder and updated commonScripts.jsp to include the js function which I added.The following is the js function I am using (I googled it and got this function)
+function showLoad() {+
var num = 0;
var tim;
var txt = "Loading, please wait ........";
document.getElementById("a").innerHTML = txt;
num +;+
+if (num == 30) { // erase after 5 seconds, adjust to suit+
document.getElementById("a").style.display="none";
window.clearTimeout(tim);
+}+
+else {+
tim = window.setTimeout("showLoad()", 1000);
+}+
+}+
On the Button OnClick property I mentioned showLoad() function, but for some reason I am getting the following error..
getElementById() is null or not an object
I think the getElementById() is expecting a required parameter but I am not sure how we can pass that ID from the IdM form.
Please let us know how did you resolved the issue.
Thanks in advance.

TDMS data scrambling error: phase of the program is different than active phase of the project

Hello Colleagues,
wE are running TDMS 4.0, We have been stuck at this phase in TDMS for the 'Start Data Scrambling /Convertion' for our activity. When trying to click on execute button of the said phase in the process tree, we are getting the error attached. I have searched for other KBA's as well as sapnotes for the error message number but there is no documentations for that error. I would like to ask if any of you have exprerience this error specifically when trying to do a scrammbling activity in TDMS? The error is unknown to us.
Hoping for your responses. Thank you
Regards,
Meinard '

Dear
SAP TDMS Data scrambling options you can on
http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000095308&_SCENARIO=01100035870000000202&_OBJECT=01100035870000
This will help
Reagrds…

The different music genre pages in the itunes app are not appearing in ios 6

Has anyone else had this problem? The store works fine but the individual genre tabs appear blank

Yep. Looks like the function is down. And only for music. Movies, tv etc. work fine. Hadn't noticed until now since I never use genre as a filter.

Signal Processing and LabVIEW Expert Full Time Position – London, UK

1x Signal Processing and LabVIEW Expert - Full Time Position – London, UK
1.0      Description:
As a Signal Processing/Software Engineer, you'll be part of a team that is responsible for developing applications based on large high speed data analysis for a large green energy project. Your skills must include a knowledge of Waveform analysis and understand the concepts of cross correlation, Fourier Analysis, Spectral analysis and other similar items.
The position ideally requires someone of CLA level of LabVIEW program to act as the project lead on the programming and technical levels of the system.
2.0      Duties and Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦     Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦     Understanding of the data acquisition side of the system and previous experience using National Instruments hardware and DAQmx
◦     Knowledge of Power engineering, Volts, Amps, current, Power Factor etc.
◦     Providing timely, accurate and effective solutions to technical problems.
◦     Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦     Reproducing and troubleshooting problems and incompatibilities.
◦     Delivering technical presentations and demonstrations to customers, colleagues and partners.
◦     Ability to project manage and understand how to keep on track with a Microsoft project based externally monitored project.
3.0      Qualifications & Requirements:
◦     Minimum second class higher honours degree in engineering or science related field, such as electronic engineering, physics, mechatronics or computer science.
◦     Basic Knowledge of text based programming languages.
◦     Experience in either LabVIEW, minimum of three years full time and at CLA level, or capability to reach there in a short space of time with the relevant training.
◦     Experience in a second language such as JAVA, C and C++ is strongly preferred.
◦     Have a vast experience of signal processing, both digital and analog.
◦     Although not required, but must have skills to pass the Certified LabVIEW Developer exam and CLA within the year.
◦     Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦     Knowledge in instrumentation & control, and industrial automation, is strongly preferred.
◦     Must be able to handle multiple tasks and enjoy working with people.
◦     Strong problem solving skills to analyse the problem and think creatively to provide a solution.
◦     Excellent written, oral and presentation skills are key.
◦     Ability to deal effectively with customers to make them successful is essential.
◦     Ability to get along with others and function as a team player as well as work effectively alone.
◦     A proactive/can do attitude is vital and a positive outlook on problem solving.
◦     Legal right to live and work in the UK. Sponsorship is not available.
◦     Must hold a full valid UK driving license.
4.0      Location:
This role is located in London, UK
5.0      Reporting:
Signal Processing Engineers will report to the Technical Director.
6.0      Salary:
Competitive salary based on level of experience.
7.0      Application:
To apply for this position please send a copy of your CV to
[email protected]
Please state the job title of LabVIEW Signal Processing Engineer in the email subject.

Hi,
I am from india.I can able to complete the projects through the internet itself.
Please let me know if any demos required to show my expertation.

Driver needed for PCI Data Acquisition and Signal Processing Controller of HP 15- r247tu

Install the Windows 10 Intel IMEI Intel Management Engine Interface (MEI) Driverhttp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69593.exe The latest version of the Intel chipset driverhttp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69575.exe All Windows 10 drivers available from HP are at the following link.http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7486447/model/7693973#Z7_3054ICK0KGTE30AQO5O3KA30R1

Hi: Try the chipset driver directly from Intel...the second file is the auto install file. https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility- If that driver does not install the PCI Data Acquisition and Signal Processing Controller, which the chipset driver should install, download the first file listed above (zip file). Unzip and extract the contents to its folder. Go to the device manager and click on the above device needing the driver. Click on the driver tab. Click on Update driver. Select the Browse my computer for driver software option, and browse to the unzipped driver folder. Make sure the Include Subfolders box is checked, and see if the driver installs that way. Then reboot.

Ssis execute process task error: process exit code was 1 while the expected was 0

Hi Sir,
in my SSIS Package(2012) i am using Execute Process Task which will call bat file. bat file is located on UNC Path.i am having the below script in the batch file.
del \\servername\foldername\name.txt
rcmd \\servername D:\name1.bat
del \\servername\foldername\name2.txt
xcopy \\servername\foldername\file.txt \\server\foldername\outfilefolder
i am getting the below error message:
ssis execute process task error: process exit code was 1 while the expected was 0
i want know at what cases error exit code was 1?
Thanks for your time.

Hi prasad.alm,
The error is generic and can be caused by various factors. Here are some suggestions for your reference:
Manually run the executable to execute the batch file so that we can check whether the command lines in the batch file are correct or not.
Check there are no duplicate/existing files in the destination folder.
Try to run the package in 32-bit or 64-bit runtime mode.
If the issue occurs when running a job, try to create a CmdExec type job step to call the excutable. If this job also fails, it might be an issue between executable and SQL Server Agent rather than the SSIS package itself.
If the issue persists, enable logging for the package, and check if we can obtain more detailed error message for further analysis.
Regards,
Mike Yin
TechNet Community Support

ABAP PROGRAM to run a process chain

Hello all,
What is the ABAP program to run a process chain after a step that has failed but is manually corrected?
In short a std ABAP program to run a pc.
Regards,
NIKEKAB

Hi.
Plz see my answer to similar question in [this thread|Re: Manage a message at the end of process chain on Web planning Application].
Regards.

Transporting Process Chains-includes the ERROR DTPs in the Target System

Hello Gurus,
Iam facing an issue in version NW2004s while transporting the Process Chains from DEV to QA. The Process Chains in the Target system are including the ERROR Dtps as parallel loads along with the regular DTP.This happens when there exists an ERROR DTP in the Target system at the time of Transport.
This will cause a problem
1.these would run parallel to the regular DTPs.
2.no of back ground processes running at any point will be beyond our limit.
Let me know if you have faced the same issue and how you resolved it.
Thanks
Jagadish

Hi DPN,
Check oout this thread. This might solve yuor problem.
Errors in Transportation
Thanks and Regards
Subray Hegde

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

Signal analysing program faces different signal processing errors while the mentioned settings in the error solutions are correct!!

Similar Messages

Maybe you are looking for