Signal Bar issues with IOS7

Ever since I updated to IOS7 on my iphone 5 it seems I never get a full signal strength. Not losing any calls but was wondering if anyone else had the same issues and is there a fix for it?

Do you see any physical damage on the iPad's screen?
Was your iPad dropped?
You could try one more thing, do a restore using recovery mode:
http://support.apple.com/kb/HT1808
If that still does not fix things, take your iPad to an Apple store.

Similar Messages

Lightning SD card reader issue with iOS7

Hello,
I have updated yesterday to iOS7 and been impressed to the smooth finish and the handling. Way better then previous versions.
Only downside are the accessories.
I have had no issues with my lighning SD card reader on previous iOS Versions but today I tried to connect it and it said that it is not supported by iPad.
It is an original lightning adapter bought at an Apple shop in Singapore and I cannot imagine that it is not supported by Apple anymore.
I have already rebooted the system a few times and got it working once for a short while until it broke down again with the same error message. I tried as well different SD cards as I thought is might have been an issue with the SD card.
Can anyone help me to fix that issue. Did I miss any setting or does anyone had the same issue?
Thank you for your assistance in advance.

Hi
I am using lightning to SD card reader on my iPad mini with iOS 7.
Mine still works, and is surely genuine as I purchased from Apple retail store in Australia however, the reader is now extraordinarily slow to load image previews from the card. Where this was previously near instantaneous on iOS 6, the image previews take 1-2secs to load EACH which is completely ridiculous.
Very frustrating!!!
Apple please fix this.

Resolving issues with ios7 connecting to time capsule?

We upgraded our iPhone 4s and 5 to ios7. Now, they are having really random but frequent issues connecting to the wifi provided y a newish time capsule. A first generation iPad now has the most reliable connection! Although, frequently the speed is much less than was typical.
All was good before the OS upgrade and there have been no other changes in electronics in the house. We have only about three neighbors networks that infiltrate the house - at least visible ones.
I have tried taking the time capsule off auto channel select to no avail.
My best guess is our iPhone's are the cause of the network outages on the time capsule. Some form of interference or ??
Going to map my wifi coverage later this week .... But I am betting that will tell me the coverage is generally good.
Anyone with similar issues? Any thoughts on how to resolve? Can't downgrade the iPhone software.

Look around the forums here.. there are heaps and heaps of issues with iOS 7.. it has caused more problems for wireless networking than any of the earlier ones.
https://discussions.apple.com/message/23279758#23279758
Works better with the TC in router than bridge mode.
ll was good before the OS upgrade and there have been no other changes in electronics in the house. We have only about three neighbors networks that infiltrate the house - at least visible ones.
I would ring apple support.. after all, they caused the problem.

Syncing issues with iOS7

Having been an Apple user for years, since the first smartphone I ever purchased was an iPhone 3GS, I've generally been a very happy customer. I did have an issue with the 3GS once though when my handset got stuck in 'connect to iTunes' mode and was rendered useless after updating the software a couple of years back. Lately, since updating the software to version 11.1.1, I haven't been able to sync my music library correctly. I'm aware a LOT of other people have been having the same issues as well, so of course, when I saw there was a new update to 11.1.3, I got excited, thinking that finally, this issue would be resolved. Has it been resolved? NO!!
While it's syncing more tracks from my library than before, I've noticed that my playlists are only syncing ONE track from each album. This is beyond a joke. I've had it with Apple. Absolutely had it. It should not be that hard to sync my music library. I still have to click on the cloud symbol on a lot of my albums because they haven't downloaded to my phone. Why is it so hard? It never used to be complicated. I'd connect my iPhone to my laptop, and everything would sync without any issues.
As soon as my contract is up, I'm switching to Samsung. I have a lot of friends who've made the move and have said it's the best thing they've done. Goodbye Crapple.

Goodbye, just don't let the door hits you on your way out.

People who are having lag issues with ios7 on ipad mini

the lag issue on ipad mini is just because as it was updated to ios7 the ram availability on free ram has been to <150 mb which is over 220 for ios6 already mini is having very less 500mb so apple techies just work on it and make the ram availability as soon as possible because not only the games like temple run and others but also the interface is lagging.the multitasking is of no use because of it simply minimising one app and opening it within the seconds closing the app running and making it start again .so guys support this thread so that we will get an update asas.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Windows 7 icons disappear/reappear Green Progress folder bar issues with slow performance. HELP!!!

Hi there, I hope someone can help me. This all started about a week ago. So I tried a fresh reinstall from my recovery disk. to no avail. Ok I have Home Premium 64bit and it seems my icons in my user folders and subfolders and the actual file icons are
blank stand ard or missing. after a while they reappear to normal. the green progress bar in the explorer folders always lags and never fully completes. It hangs. Now I see that it takes 30 secs to get a program to open. Currently my control panel screen is
blank and my connection between my ipod touch 5g and my desktop is very slow at data transfer. I'm going bonkers! The only things I altered was turning off WMM in my router, Installed a software someone gave me (only to find out it was a crack software) deleted
that first! and used CCleaner to clean my registry

Hi,
So a total reinstall didn’t fix the issue?
We may take a try with the following article to make Windows a better performance.
Optimize Windows for better performance
http://windows.microsoft.com/en-hk/windows/optimize-windows-better-performance#optimize-windows-better-performance=windows-7
Then, please check to see if any new updates available, also the related drivers, make sure they are up-to-date.
After that, if issue insists, please refer to the following article to run chkdsk command in CMD to check if there are disk issue.
http://technet.microsoft.com/en-us/library/bb491051.aspx
Best regards

Wifi bar issue with brand new iPhone 4S

My wifi bar was greyed out, and I just had to get a new iPhone 4s to solve the problem. That was today, and the issue has already returned after I updated from 7.0.1 to 7.1. Help?

Restore iPhone with iTunes on computer. If still problem after the Restore take it to Apple. Replacement iPhone still has Warranty. Make Genius reservation or set up service and take or send to Apple for resolution.

Issues with ios7

hi all
i've just uploaded ios7 and i can t receive notifications and imessage is not able to connect. what s the issue?
thanks

no i can't it stuck on a sreen with a picture of a ubs cable with a arrow pointing to itune throgh my main computer not sure what todo is it a apple problem or my own?..

HT1688 Is anyone having issues with iOS7 Siri? (iPhone 5s)

On multiple occasions during the day I'll ask Siri to remind me.... With a long pause she'll say "I'm really sorry but I can't take your request right now please try again later. Then I'll try right after and she'll work. Very frustrating. iOS6 worked like a charm. This happens on wireless and LTE networks.

Joe, I've been using Siri since it was an app on my iPhone 3G. I've had my 5 since a week after it was introduced. While on iOS 5.01, every now and then I would get a single message. However, since moving to iOS 7 I get multiple rejections in a row... and often. In the picture above you can see the signal strength is fine. This also happens when I'm 10 feet from my WiFi router at home too. This is an iOS problem.
Based on the number of messages I got from Siri in the picture above you can see that my request was rejected 5 times before I gave up and posted that message on this site.
(I think) I have found that if you get her attention first, it reduces the number of rejections. For example, I'll push the button and say "Siri?". Siri answers, "Yes? How may I help you?". Then I ask my question. This is NOT ideal. It's also quite embarassing trying to find an answer at a party and people see the rejection. Not good publicity for the iPhone.
Again, This is definitely an iOS issue and it NEEDS to be fixed!

Signal Handling Issue with OCI

Greetings.
I have a library using OCI with Oracle 10g.
I am not doing any signal handling inside the library.
I have realized after a connection is made to Oracle 10g server and successfully terminated, the ctrl+Z signal (SIGTSTP) would not be honored. If I use the same library and make no connection to database, then the signal is honored. Other signals such as SIGINT etc are OK even if I make connections to database server.
Operations that I do using OCI are simple:
1- initialization of context (standard env creation, set attributes, handle allocation etc)
2- making connection
3- inserting using SQL insert method (statement prep, defineByPos, execute)
4- simple selection of last value of a sequence (statement prep, defineByPos, execute)
5- clean up (OCISessionEnd, OCIServerDetach,and freeing handles)
Again, I have no signal handling inside the library. I am using this over Solaris OS and the functionality is correct except for this signal issue.
My questions:
1- Is this a known issue or is this something that has been seen before?
2- what sort of signal handling is in OCI that could potentially impact my app?
3- Is there any solution that you could suggest?
thank you in advance.

I'm trying to migrate from oracle 9i HP unix to oracle 10G AIX5.3
I'm trying to create a connection pool. Then create Many threads, with each of these
performing an OCI Session Get at thread initialization.
Then handing the threads work to perform on their existing OCI session to the connectionpool.
Same thing was working fine in oracle 9i but if I try to do the same in oracle 10G seems to get locked up,
unless the sessionget/sessionrelease are in the same working
thread subroutine. I am trying to avoid getting a session and releasing for each unit of
work.Instead I'd like to acquire a bunch of session against the connection pool.And then have the threads (with persistent sessions) perform periodic work....
If utilizing a get/work/release all in the same thread and subroutine call.Then everything works, except performance is very poor.
please find the function I'm using to achive the same.
Experts please help me ,I'm totally struck here....
int ConnectionOpen (Connection conn, char username, char password, char server) {
** Functionality : Opens a new session with Oracle.
** Parameters : conn - pointer to the struct Connection. It is an output parameter
** returns the handle to the new session.
** username - pointer to the char array has username.
** password - pointer to the char array has password.
** server - pointer to the char array has database name.
** Returns 0 on success, 1 on success with information and non-zero value on error.
int status = 0;
boolean sesfnd;
text errbuf[512];
sb4 errcode = 0;
if (!conn) return OCI_INVALID_HANDLE;
if (!strcasecmp (USE_SESS_POOL, "YES"))
/* PLC44050021 Session Pool Changes*/
if (conopen==0)
status = OCIEnvCreate((OCIEnv **) &envhp, OCI_THREADED,
(dvoid *)0, (dvoid *(*)(dvoid *, size_t))0,
(dvoid *(*)(dvoid *, dvoid *, size_t))0, (void (*)(dvoid *, dvoid *))0,
(size_t)0, (dvoid**)0);
if (status != 0 && status != 1) return status; /*error in creating environment*/
status = OCIHandleAlloc((dvoid *)envhp,
(dvoid **)&errhp,
OCI_HTYPE_ERROR,
(size_t)0,
(dvoid **)0);
if ( status != 0 && status != 1 ) return status; /*error in allocating error handler*/
status = OCIHandleAlloc((dvoid *)envhp,
(dvoid **)&authp,
OCI_HTYPE_AUTHINFO,
(size_t)0,
(dvoid **)0);
if ( status != 0 && status != 1 ) return status; /*error in allocating error handler*/
status = OCIHandleAlloc((dvoid *)envhp,
(dvoid **) &poolhp,
OCI_HTYPE_SPOOL,
(size_t)0,
(dvoid **)0);
if ( status != 0 && status != 1 ) return status; /*error in allocating CPOOL Handler*/
status = OCISessionPoolCreate((OCIEnv*)envhp,
(OCIError*)errhp,poolhp,
&poolName, (ub4*)&poolNameLen,
(text*)server, (ub4)strlen(server),
sessMin, sessMax, sessIncr,
(text*)username, (ub4)strlen(username),
(text*)password, (ub4)strlen(password),
OCI_DEFAULT) ;
if ( status != 0 && status != 1 ) return status;
conn->envhp=(OCIEnv*)envhp;
conn->errhp=(OCIError*)errhp;
status=OCIAttrSet((dvoid *)authp,(ub4) OCI_HTYPE_AUTHINFO,
(text*)username, (ub4)strlen(username),
(ub4) OCI_ATTR_USERNAME, (OCIError*)conn->errhp);
if ( status != 0 && status != 1 ) return status;
status=OCIAttrSet((dvoid *) authp,(ub4) OCI_HTYPE_AUTHINFO,
(text*)password, (ub4)strlen(password),
(ub4) OCI_ATTR_PASSWORD, (OCIError*)conn->errhp);
if ( status != 0 && status != 1 ) return status;
status = OCISessionGet((OCIEnv*)conn->envhp,
(OCIError*)conn->errhp,
(OCISvcCtx**)&(conn->svchp),
authp,
(OraText *)poolName, (ub4)strlen((char*)poolName),
(OraText *)"", (ub4)0,
NULL, NULL,
0,
OCI_SESSGET_SPOOL);
if ( status != 0 && status != 1 ) return status;
conopen=1;
/******* if the session pool is already established, reuse sessions out of it ********** /
else
conn->errhp=(OCIError*)errhp;
conn->envhp=(OCIEnv*)envhp;
/******* Hanging in this call ********** /
status = OCISessionGet((OCIEnv*)conn->envhp,
(OCIError*)conn->errhp,
(OCISvcCtx**)&(conn->svchp),
authp,
(OraText *)poolName, (ub4)strlen((char*)poolName),
(OraText *)"", (ub4)0,
NULL, NULL,
0,
OCI_SESSGET_SPOOL);
if ( status != 0 && status != 1 ) return status;
else
status = OCIEnvCreate((OCIEnv **) &conn->envhp, (ub4)OCI_DEFAULT,
(dvoid *)0, (dvoid *(*)(dvoid *, size_t))0,
(dvoid *(*)(dvoid *, dvoid *, size_t))0, (void (*)(dvoid *, dvoid *))0,
(size_t)0, (dvoid**)0);
if (status != 0 && status != 1) return status; /*error in creating environment*/
status = OCIHandleAlloc((dvoid *)conn->envhp, (dvoid **)&conn->errhp, OCI_HTYPE_ERROR, (size_t)0, (dvoid **)0);
if ( status != 0 && status != 1 ) return status; /*error in allocating error handler*/
status = OCILogon((OCIEnv*)conn->envhp, (OCIError*)conn->errhp, (OCISvcCtx**)&(conn->svchp),
(text*)username, (ub4)strlen(username),
(text*)password, (ub4)strlen(password),
(text*)server, (ub4)strlen(server));
return status;
}

Ipad smart cover auto unlock clock and status bar issue after ios7

Im using an ipad mini with apples smart cover (auto lock/unlock enabled), it used to show the lockscreen(before swipe) whenever I opened the case, but after ios7,whenever I open the case,its already swiped and I have tu enter my code.
the bug is that you have no clock in the status bar on the code screen. whichs forces you to enter your code each time you open the cover just for checking the time! or swiping back to the lockscreen.
any fixes?

I know.. it was better in iOS 6..
To make the clock (time) appear without entering the code simply Tap the Screen once.
For example:
While holding the ipad in the landscape position peel the cover open just enough to get your thumb under the cover and tap just below the battery indicator.
See this related discussion too.. https://discussions.apple.com/message/23981258#23981258

How to debug signal related issues with mdb

I have a C++ application and occassionally it core dumps receiving a SIGABRT signal. We are not able to find the source of the SIGABRT signal. All we have is the core. Is there a way to find out who sent SIGABRT to our process? For that matter if someone sends our application a SIGABRT using kill cmd asynchronously, how does one find out who has sent the same? We can't keep truss'ing the process as it's a production env. Is there a way to find this out from the core file?

I don't have a specific suggestion, but these ideas might help you.
I assume by 'cannot be resumed' that you are able to launch the application, but after leaving the application and returning back to it, the app crashes? Or is it that you can run the app once but never a 2nd time (even after it fully closes)?
What kind of app is it? WP7, WP8, WP8.1? Silverlight or WinRT? It might not make a difference but it might make it easier to find a solution. I suggest looking up the application life cycle relevant to the version you are targeting.
Is your app.xaml.cs doing anything out of the ordinary or is it just the default code?
Here's what I would try: put a breakpoint at the start of every method in App.xaml.cs/VB and hope one is hit! Not very helpful, but you might get lucky. I'm not too well versed in app resuming, but is the app navigating back to the page it was on when tombstoned?
Perhaps the issue is in the page OnNavigatedTo or the Loaded event handler (if you have one).
When my apps fail to launch and don't hit any breakpoints it usually ends up being an issue in XAML, not code behind. But I don't think your problem fits that becuase you can clearly launch the app, just not resume it.
I'm sure you've probably tried most of those things, but hopefully I thought of something you missed and it turns out to help :)
Visit http://blog.grogansoft.com/ for Windows development fun.

Help with a vertical scroll bar issue with a List component

hi. i have a basic <s:list> that uses an XMLListCollection as it's data provider and a very basic itemrenderer. when a row in the list is clicked a function gets the list.selectedIndex then populates some text fields with more xml data. that all works fine.. the problem i have is that the vertical scroll bar on the list seems to be "clickable" - just like a row in the list. the scroll bar scrolls normally but when it's clicked the selectedIndex becomes -1 which is not helpful b/c the value -1 is passed to the XMLListCollection.
any ideas? cheers.

thanks but still problematic...surely the <s:List> component shouldn't return a value when the scrollbar thumb is clicked? i created a very basic list (see below) and made the list dimensions short enough so that there is a vertical scrollbar and found that when the scrollbar thumb is clicked the trace(event.currentTarget.selectedIndex) returns a number. that's annoying b/c i just want a selectedIndex value for a row that is clicked not the scrollbar.
any ideas to get around? cheers
<fx:Script>
<![CDATA[
protected function list1_clickHandler(event:MouseEvent):void
trace(event.currentTarget.selectedIndex);
]]>
</fx:Script>
<s:List x="162" click="list1_clickHandler(event)" y="276" labelField="@label" width="144" height="153">
<s:dataProvider>
<s:XMLListCollection>
<fx:XMLList xmlns="">
<node label="one"/>
<node label="two"/>
<node label="three"/>
<node label="four"/>
<node label="five"/>
<node label="six"/>
<node label="seven"/>
<node label="eight"/>
<node label="nine"/>
<node label="ten"/>
<node label="eleven"/>
</fx:XMLList>
</s:XMLListCollection>
</s:dataProvider>
</s:List>

Ford Sync USB issues with IOS7 update for iPhone 5

Hi,
I've recently updated my iPhone 5 with the latest IOS7 update and now it won't connect to Ford Sync via USB. The bluetooth works OK but I want to play my music through the USB.
It stays on the "indexing" screen and there is no audio output and I can't navigate away from this message.
I've tried restoring my iPhone but this hasn't solved the problem.
Urgent assistance to resolve this would be greatly appreciated.
Thanks,
Simon

Hi
I have purchased a Ford Focus MK3 with the Ford Audio System and I have difficulties connecting my iPhone 5S with latest iOS with the USB connection.
When I connect my iPhone using USB the Ford Audio System recognizes it (it says iPod, not Iphone, but np). I can see that it starts playing the music tracks from my phone and I can fully control them. I see the meta tags and I see the progress in time of the song in my Ford Audio System.
Problem: I can not hear the sound. I hear a little "knick" "knack" every now and then, but the sound itself can not be heard. I find that a little bizarre. All seems to be working just fine. I can navigate the albums, titles etc. All is recognized. Just no sound ...
Using a USB Stick works perfectly.
Using BT works fine too.
Any help is much appreciated.
Best regards
Marco

Issues with ioS7 on iPad 2.... My iPad stopped working...

I have installed ios7 on my iPad 2 and the tablet keeps restarting and goes into power off and on mode. Can anyone help???

This is the iphone forum
You should post in the ipad forum

Signal Bar issues with IOS7

Similar Messages

Maybe you are looking for