Signal drops inside the villages in LENOVO A7000

No signal(signal totally drops) inside the villages..works well in all other phones why???...pls reply me..
Any update for this issue..

Does anyone know who puts those "solved"  thingies on these threads?  If so,  tell them to stop doing it.   This gives a false idea, that a specfic problem was solved then the issue is in fact not known.    Solved implies that an issue was fully investigated and and fix was found -  it does not mean that a problem went away for a couple of days.  
Re loss of 4G,  note that Verizon's 4G operates in a completely different frequency band at 700 MHz , not the 1900 MHz 3G/voice band.  The 700 MHz band has quite different transmission and interference issues.    Try to identify any changes in your environment that may affect performance.    Weather, construction,  humidity,  location, etc.    Also,  let us know the signal strength and SNIR reported (mouse over the green bars and you will see those numbers).   Thanks,  Dave

Similar Messages

  • 3G fine, 4G drops inside the apartment...new development

    Starting only this last weekend (4/9/11), I am now not able to get a constant 4G connection from my Pantech modem inside my apartment.  Outside, or in a Verizon store, it works fine.  This is consistent with 3 different computers, all running Windows 7.  I've used several different settings using CTRL+D in the VZAccess Manager, same results.
    This is crucial for me to correct since this is my only home Internet connection, and I work from home once a week.  What's most odd is that before 4/9, the 4G connection worked great on my work computer, strong 4G connection all day.  What would change the strength of a 4G signal from one day to the next?

    Does anyone know who puts those "solved"  thingies on these threads?  If so,  tell them to stop doing it.   This gives a false idea, that a specfic problem was solved then the issue is in fact not known.    Solved implies that an issue was fully investigated and and fix was found -  it does not mean that a problem went away for a couple of days.  
    Re loss of 4G,  note that Verizon's 4G operates in a completely different frequency band at 700 MHz , not the 1900 MHz 3G/voice band.  The 700 MHz band has quite different transmission and interference issues.    Try to identify any changes in your environment that may affect performance.    Weather, construction,  humidity,  location, etc.    Also,  let us know the signal strength and SNIR reported (mouse over the green bars and you will see those numbers).   Thanks,  Dave

  • Drag and Drop inside a component

    I am using the Project Gantt component and want to drag and drop inside the component. I want to drag a timeline from one row and drop it to another row. And also drag a timeline from a row and drop it another place in the same row. Can I make the component a dragsource and droptarget?

    Hi,
    should be posted at JDeveloper and OC4J 11g Technology Preview
    Frank

  • In Labview 8.5, what happens if the signal input exceeds the signal input range set by the DAQ Assistant?

    Hello all,
    This should be a pretty simple question, but I can't seem to find the answer on-line and don't currently have the capabilities to test this:
    I'm using LabVIEW 8.5 and have a VI that imports sensor data through the DAQ Assistant. In the configuration tab there is a signal input range. What happens if my sensor exceeds this range? Will I get a warning? Will the value default to the maximum (or minimum)? I was interested in writing in some code to display an error as I approach the limits of this range, but was unsure if I also needed to include some code to display an error if the range is exceeded as well.
    Thanks for the help,
    Tristan
    Solved!
    Go to Solution.

    Hello Tristan,
    The behavior depends on the range you choose and the device you are using.
    If you are using a device with only one valid input range, we will use this range even if you set a smaller minimum and maximum in the DAQ Assistant.  Thus, if your device only supports ±10V and you set the range to ±8V, you will still continue to get valid data after your sensor exceeds 8V until you approach 10V.  Once you reach the limit of the range of your device, the output will "rail" and just return the maximum value until the signal drops below the maximum again.
    Note: A device that is nominally ±10V usually has some overshoot (like ±10.2V) that is typically specced in the manual.
    However, if you are using a device with multiple input ranges then things get more complex.
    The NI-DAQmx drive will pick the smallest range that fully encompasses the range you choose.  So, suppose your device supports the following input ranges: ±0.2V, ±1, ±5V, and ±10V and you choose 0V - 3V as the range in the DAQ assistant.  The NI-DAQmx driver is going to look at your input range and the list of input ranges that your hardware supports and choose the smallest that encompasses the full range you set.  This would the ±5V, because that's the only range that contains up to 3V.  As a result, any input signal between ±5V will be returned and any outside this range will "rail" to either the maximum or minimum value.
    We do this because using smaller ranges make more effective use of the resolution of the ADC.  Thus we try to use the most efficient range based on what you request without picking a range that will cause you to miss data.
    Let me know if I can clarify this further. 
    Seth B.
    Staff Test Engineer | National Instruments
    Certified LabVIEW Developer
    Certified TestStand Developer
    “Engineers like to solve problems. If there are no problems handily available, they will create their own problems.”- Scott Adams

  • Contact Manager Problem Lenovo A7000

    hii,After the last update Lenovo A7000 contact manager app not working properly. its not showing all my contacts saved on gmail account. Thanks & Regards,Vishal Agarwal

    I have already mentioned this in other discussion thread but was never got noticed by lenovo staff. So once again for your kind infirmation I am explaining about this issue. After the s142 update any new contact added under the Google account is not getting synced to google servers though in setting-> accounts-> google accounts its always showing synced recently but changes don't get updated on the server. This is another serious issue in s142 update. Pls don't let it unnoticed. My humble request to lenovo staff is to kindly look into this matter . At least acknowledge this issue. I don't know how else I can bring this issue to your notice. People will loose each and every contacts added after this update.
    PS: Issue exist even after factory reset.

  • Airplay video signal drops

    We have 7 Apple TV's throughout our company and all of them exhibit the same behaviour, on many different laptops.
    All laptops are running minimum of OS 10.9.2.
    We have a Cisco Clean Air WiFi network with excellent signal coverage in all areas surrounding each of the AirPlay devices.
    Here's exactly what happens:
    User will enter conference room with Apple TV connected to an LED Flat Panel TV.  Power it up, then select the appropriate Airplay device from their Airplay menu and begin streaming mirroring their desktop to the television set.  Within 2 minutes, the signal drops, forcing the user to re-select the airplay device once again.  Usually it will drop again within 2 minutes.
    If the user reboots the Apple TV, the issue will go away for the rest of the session.  Perhaps something about the Apple TV's keeping a sustained connection to our WiFi network. 
    We've been working with Cisco to pour over our WiFi network but they cannot find anything from the WiFi gear that is contributing to the signal loss.
    Anyone have any ideas here?  I'd like to try an Apple TV alternative to see if a different device would have the same issue but the options seem extremely limited.
    Thank you.

    I have two laptops each with their video out adapter connected and then cabled to a switch box where the big monitors project the signal of the laptop that the swtich box is set to. Like channel selection. Previous versions of Keynote were never a problem and I mean never. The signal came right through but now with Keynote 4 the signal drops out even tho the laptop is still active and apparently sending a signal through its video out connection. I have to hit escape and get out of keynote and then go back to PLAY for keynote to once again send that signal.

  • Monitor Signal Drops During XP Boot

    Hello All!
    This is my first post on this forum, so please forgive me if I make any mistakes. I have recently bought a MSI Motherboard, and all was well until I turned my pc on without the monitor plugged in - now, the monitor signal drops during the boot up (at the xp screen when the bar is moving across the screen).
    My system setup is this
    Athlon xp 2000+
    MSI K7n2G Board
    Using the on-board graphics
    256mb DDR Kingston RAM 27000 (fully compatible with the board)
    120 GB Western Digital hard disk
    Liteon cd writer 52x 24x 52x
    Pioneer 106 DVD writer
    I believe I am running BIOS 3.5
    I tried booting up in safe mode and that boots up fine. I did a system restore to the day before I accidentally turned the machine on without the monitor plugged in, and that didn’t make any difference.
    I am clueless as to why this doesn’t work, and am hoping someone here could tell me how to solve this problem.
    Many thanks for any advice, and thanks for reading,
    Regards,
    Rupz112

    I have come across a similar problem before. The problem was that the monitor couldnt support the default resolution of windows XP so I went in safe mode and lowered the resolution and the problem was solved.

  • IPhone 6 freezing after WiFi signal drops

    Anyone else having recurring OS freezing and hanging problems after a sudden WiFi signal drop?
    The phone seems fine on WiFi for a period of time, sometime hours, sometimes days but then all of a sudden the signal strength drops to one and everything goes crazy.  Trying to turnoff WiFi from the control center doesn't have any effect (it looks like it's off but the wifi indicator remains on).  If I try an go into the settings app, it comes up as a blank white page and hangs.  Sometimes I can go back to the home screen, sometimes not but the phone will freeze up solid or eventually reboot.  If it reboots or I do a hard reset the wifi switch is grayed out and can not be enabled.
    If I perform another hard reset the wifi switch will sometimes be accessible again but the phone seem unstable.  It will reboot randomly or simply freeze up.  The last time it froze on the apple boot screen and I had to put the phone into recovery mode to restore it. 
    I have iOS 8.1.1 installed and have done a dozen hard resets and restored as a new phone from iTunes twice in the past week.  It's driving me nuts because the phone just seems unstable.

    I have reset the modem everytime this happened. That is why I believe this could be a software problem between iOS 8 or iPhone 6 wifi and the band in which the airport express communicates.
    Today I have disabled the airport express and began using the wifi from the HUB of my internet provider. So far no drops on wifi signal no freezing, no crashing. Connectivity seems much faster and clean now. Lets hope it keeps this way.

  • I dropped my iphone and when i picked it up it was working but as soon i got inside the house and turned it on, the screens lights up black then it goes completely white

    he;lpp!! i dropped my iphone and face down on the screen andwhen i picked it up it was working and everything , when i got inside the house and checked it the screen goes black then it goes white and stays then shuts off and the same thing happens when you push the home button, plus im still able to recieve and get text messages i just cant see cause the screen.... help me like NOW !!!!!!!! haha i really dont wanna take it to a shop and pay money !!

    You can try resetting it: Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). If you are able to see the Apple, then the reset is in progress, and the Home screen will display shortly.
    If you are not able to see the Apple, then you are going to need to make a trip to the Apple Store.
    Cheers,
    GB

  • My daq 6008 wil not drop the 5V after the VI is stopped, i have a digital signal going from the error out on the daq in the while loop to the error in on the daq outside the while loop and a boolean going to the data of the daq outside

    my daq 6008 wil not drop the 5V on a digital output after the VI is stopped, i have a digital signal going from the error out on the daq in the while loop to the error in on the daq outside the while loop and a boolean going to the data of the daq outside, but i can t seemto get it to work

    i attached the block diagram so you can have a look
    Attachments:
    PID Temp control.docx ‏120 KB

  • Drop calls at our home in The Villages, Fl

    Recently relocated from one home to another in the Villages, Fl and seems our cell phone get drop calls and people saying they can't hear us...if we go outside it doesn't seem to happen as often..I called Verizon and they recently told me to hit ### when this happens and I have been doing that..but yesterday they called to say I haven't hit ### enough times for them to follow up on this..most annoying when you are talking to people about your medicial coverage and in the middle of the call it goes dead!! why can't they just look into this problem??? I think it is tower related..some of the neighbor also have this problem with Verizon cell phones..i told them to start hitting ###...would like t

    First question is why you even signed up for a company that has no service at your home, but that is another discussion I suppose.
    You can get a network extender from Verizon, have you talked to Verizon about this? You will need home internet for that to work.

  • NI USb 6211 DAQ to get a signal inside the computer

    I am using Ni USb6211 DAQ to get a signal inside the computer, but the signal displayed as blocks of samples and I need contiuous signal display, I mean instance signal. Could you please help me?

    They are medical signals and the synchonization is important.
    I have experience in Labview enough to finish my work. Thank you for your time and you do not have to solve.
    Attachments:
    ECG & Pulse oximetry.vi ‏388 KB

  • ADF Drag and drop event inside the single af:treetable

    Hi Experts,
    I have a af:treeTable in my ADF web project and i would like to implement the drag and drop event to the same tree table for supporting my sample test project use case. Currently i am facing some issue to get the source tree node and the destination tree node of the drop and drop event inside my drop listener method. How can i get those object since i need to perform some business operation inside the listener. Please note that i am not using ADF BC4j in my project. The service layer is implemented as EJB and it's being called from the backing bean.
    Looking forward some guide lines to resolve this issue from you experts.
    Thank you.

    It's not a perfect solution, but a work in progress that i'm currently using in my backing bean:
    private RichTree navTree;
    private void exitContainers() {
    boolean success = false;
    while (!success) {
    try {
    navTree.exitContainer();
    } catch (Exception e) {
    success = true;
    private void clearDisclosedRowKeys() {
    if (navTree != null && navTree.getDisclosedRowKeys() != null) {
    RowKeySet rks = navTree.getDisclosedRowKeys();
    Iterator rksIter = rks.iterator();
    while (rksIter.hasNext()) {
    exitContainers();
    List<Integer> rowkey = (List<Integer>) rksIter.next();
    List<Integer> newRowkey = new ArrayList<Integer>();
    for (Integer row : rowkey) {
    if (navTree.isRowAvailable(row)) {
    navTree.setRowIndex(row);
    navTree.enterContainer();
    newRowkey.add(row);
    } else {
    // Row is no longer available
    break;
    if (newRowkey.size() == 0) {
    rks.remove(rowkey);
    } else {
    rowkey.clear();
    rowkey.addAll(newRowkey);
    Whenever you make a 'delete' or 'move' in the tree, call clearDisclosedRowKeys(), it will remove anything that's no longer valid, so your tree won't collapse, and you won't get the error anymore.
    I took out my logging and debug statements, but essentially this just gets all the rows, checks to see if they're valid, and if so creates a new RowKeySet with the valid rows in it.
    Of course make sure you have the setNavTree and getNavTree accessor's created and that they're bound in your JSFF, otherwise navTree will always be null.
    I haven't yet found a way to 'nicely' find out if you're at the top level container, so i'm relying on an Exception to occur to give me that information, if anyone knows a better solution please feel free to share it.

  • HT3939 if I purchased iPhone 5 GSM A1429, then I tried to use CDMA SIM card inside the same phone, does it'll work and provide me signals ???

    Hi All,
    Regarding iPhone 5, at the latest model, if I bought an unlocked one from UK Apple Store,  iPhone 5 GSM   A1429, then I tried to use CDMA SIM card inside the same phone, does it'll work and provide me signals or not. ??
    Thanks for your answering.

    The answer is complicated. None of the major carriers offer PAYG service in the US, but if you buy a contract-free phone for full price you can get a plan that can be canceled at any time from any of the major carriers (AT&T, Verizon, Sprint and T-Mobile). There are smaller resellers that offer PAYG service (StraightTalk, for example), but they are hard to deal with.
    The most liberal is the GSM carrier T-Mobile. They have "unbundled" the phone from the service, so if you bring your own phone or pay full price for a phone the monthly cost will be lower.
    The other 3 will charge you the same monthly cost whether you pay full price for the phone or get a subsidized phone.
    Verizon iPhone 5 series phones are unlocked out of the box for international use (thanks to a condition the FCC imposed on Verizon when they were allowed to buy a substantial chunk of spectrum). They are the only phones sold in the US that will work on LTE bands in the UK and Europe.
    Sprint is not a good choice, because they give you a hard time if you want to unlock your phone.
    AT&T phones are locked, but they will unlock the phone if you pay full price or pay off your early termination fee. However, they will only work on GSM in the UK, not on LTE (4G).

  • I have a net gear wireless router and a APE working great inside the house, but the wireless signal is weak in the backyard, can I get a net gear extender for the back and it will also send my music to the airport express?

    I have a net gear wireless router and a APE working great inside the house, but the wireless signal is weak in the backyard, can I get a net gear extender for the back yard and it will boost our wo
    Ireless signal and also send my music to the airport express? Or does the airport express work as a stand alone hub?

    Trust me when I say this coming from 20 years of experience.
    Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
    Download and install Carbon Copy Cloner, clone internal drive to external drive.
    Set a schedule to remind you to do it at least once a week, keep it near your charger.
    When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
    CCC will do the rest.
    If you want to boot from it, hold the option/alt and select it Startup Manager.
    I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
    It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
    Make as many clones as you want, keep them time seperated, off site etc. etc.
    Cables don't have network issues, clones can be verified in seconds merely by booting from them.
    Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
    Software problem? No sweat, boot of the clone and reverse clone your problems away.
    If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
    I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
    Most commonly used backup methods

Maybe you are looking for