Signal in not correct

I have created 2 iViews on the same page with Visual Composer. These iViews should communicate using Signal out and Signal In
Using Flash debugger, I see that Signal out send the following information :
<b>signal: urn:com.sap.vc:eventv2&lienv2&<Params version="2" ><Row customernum="0055000579" salesorg="2000" /></Params></b>
It seems correct. But the Signal In seems to receive :
<b>signalinAHA10V -%3CParams%20version%3D%222%22%20%3E%3CRow%20customernum%3D%220055000579%22%20salesorg%3D%222000%22%20/%3E%3C/Params%3E</b>
Therefore I think signal In does not understand the information.
Does anyone know this probleme (my VC version is 7 SPS10)

The second iView received the data under ASCII format (I saw it with flash debugger) but the data are not send to the BAPI. I don't know if something is missing between "Signal In" and the BAPI. The link between both contains the mapping and it is not possible to define an event.
Other question : Do you know if it is possible to retrieve source code in Developer Studio ?
Thanks

Similar Messages

Hello. I upgraded my MIFI 2200 (had no contract on it) to a Jetpack (with a contract) when customer service told me this 4G device would use less data because it was faster. This was not correct. Anyway, I got the device, had problems, did tech support

I upgraded my MIFI 2200 (had no contract on it) to a Jetpack (with a contract) when customer service told me this 4G device would use less data because it was faster. This was not correct. Anyway, I got the device, had problems, did tech support, re-activated my MIFI. 1. Decided to return the device. Spent hours with Customer Service, then finally up to Management, they agreed to take it back and void the contact, I sent it back immediately – and instead of voiding the contact they transferred it to my MIFI! Please cancel the contract on the MIFI. 2. During the short time I had the Jetpack I continually received overage alerts, took it all the way up to 30 GB, each time I backdated the new data plan except twice when customer service did and failed to back date the increase, and once the computer locked customer service out and could not increase. The end result is I have a $495 bill, many of these alerts were false since I ended up with only 14 MG for the month, etc. I am asking that my bill be reduced significantly to reflect no overage and to compensate for these problems. Please open up a ticket for this.

I had Verizon JetPak and you will find it will eat data like crazy. I opted to sign on to ATT Uverse and configured my phones and other devices to the WiFi on the Uverse system. It took about 5 minutes to completed the configuration. I was using 10 to 12 GB monthly to support 5 devices. Even if you use Verizon DSL, you are still subjected to same GB allotment. In my area, Verizon DSL is not available. With Uverse, I have 250 GB monthly to use, and I have not even come close to using anything of that magnitude. I reduced my GB package with Verizon to 2 GB per month and since having ATT Uverse, I never use more than 1GB a month with Verizon.
I have no problem with Verizon cell phone service as we get a much stronger signal where we live than you can with ATT or any others. It is just my opinion, but if you are running multiple devices off Verizon Jetpak, you will eventually spend a fortune to keep pace. I pay $60 a month for 18 Mbps speed, although ATT have packages that cost much less. But, it saves me a bundle each month. The cost of Uverse alone is worth not having to run everything through a Jetpak.
If you have the option to use another DSL service provider in your area, I recommend dumping the Jetpak and sign on with another carrier.

My signal is not working it keeps saying I have full signal then searching!!!

My signal is not working it keeps saying I have full signal then searching!!

Hello my fellow iPhone 4s users...
i have been going around the web for solution to the lost signal. Upon further investigation and diagnosis with my iPhone and other iPhone with a combination of chnage of sim between phones, resetting the network, hard reset and restoring a few times, it still persist. My analysis is that the iOS 5 >Settings>General>Cellular Data is the culprit. It does not have an option of switching between Edge and 3G (unlike the previous iOS lower than 5.0 or 5.0.1) It always stays on 3G. Now comes the trickiest part of my analysis. For networks having mid to low signal in areas, the updated dual antenna of the iPhone 4s switches automatically between 3G and normal signal. However, since it has no option to go down to Edge, it "automatically revert back to the original signal status". Sometimes from a very strong signal to a low signal area, it shows full bar of signal. but when you try to send an sms or make a call, it fails.
Conclusion:
I believe Apple has been digging deep with their softwate developers and checking the hardware of the iPhone 4s. And if my analysis is correct, they may have to incorporate the option of EDGE and 3G again.
Temporary Solution:
For low reception/signal areas, actually NONE... we have to wait for the update by Apple.
So either use our iPhone 4s as an expensive iPod on poor reception/signal areas and transfer our sim cards temporarily to another phone or have your phone put to AIRPLANE MODE on-off again.

IPhone/iTouch "password not correct" on home WiFi

This problem reads like many others threads but I haven't really seen an answer - Do Apple Employees Administrate these forums??
I have an iTouch and an iPhone 3Gs both now on os4 but this prob has happened through last 3 firmware versions.
They both connect to the home WiFi, but wont remain connected and will ask for the WiFi Password followed by a Password Not Correct message. You can continue to input the password and occasionally it is accepted or you can power cycle the router but both are temp fixes as the Apple's will drop back off again (sometimes minutes later or hours later). I have exhausted my efforts with the router (firmware upgrades and every combination of security setting) Other devices (laptop, wii etc)don't have any WiFi issues. In saying that, the iPhone stays connected to the work WiFi no problems.
I have tried WEP and WPA security. I've enabled MAC Address filtering which didn't help but after reading one of the threads I have disabled WiFi security and have MAC Address filtering enabled and it seems to be holding up (only attempted a couple of hours ago.) Is this a secure workaround or does someone know what I need to do? I'd prefer not to use this method as it's handy to let visiting friends/family use my WiFi.
The router is a Linksys WRT54GP2 and the signal level is high throughout the house and always seen by the Apple's
Any help would be greatly appreciated! Thanks.
The iPad purchase is next if I can get an answer (a mate has brought his around and had the same problem) - so come on Apple employees, put your heads together!

Yeah you aren't the only one. I have the same router, and my iPod, dads iPhone, and 2 other apple macbooks always had troubles with the router. A temp fix would be restarting the router, but keyword here is temp.
Unfortuantely we cant use custom linux firmware as per http://www.dd-wrt.com/site/support/router-database
My router firmware version is
Firmware Version: 1.30.05
I recall I upgraded from version 1.00 ages back but that did nothing.
Anyway I shall try google around for more solutions, I'll get back to you if there is a fix.

Getting error while creating a new web app saying "The password supplied with the username domainname\username was not correct. Verify that it was entered correctly and try again"

Hi ,
I am trying to create a new web app using Central Administration in Sharepoint 2010 and getting an error "The password supplied with the username was not correct. Verify that it was entered correctly and try again".
I tried running this command also "stsadm -o updatefarmcredentials -userlogin <domain\username> -password <newpassword>" but when it got executed it showed me "Access Denied".
What should i do ??
Thanks in advance.
Regards, Anurag

HI,
right click on command icon and click run as administrator then use above stsadm commend to update credential. If still you face same issue then try with powershell as mention in below link: (make sure that you open sharepoint powershell as run as administrator)
http://smartrider.wordpress.com/2010/07/15/powershell-script-to-create-web-application-and-site-collection-in-sharepoint-2010/
let us know your result
Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

Error "can not start the configuration in parallel does not correct"

Hello everybody,
I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
Thanks in advance!

Check this KB
1678498 - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error

[PI 7.11 SP3] PI components not correctly registering themselves after AS restart

Hi Experts,
We have planned a system backup shutdown and restart every night for our PI environment.
In a random manner, some PI components as XI AF or Integration Directory are not correctly registered to SLD after that restart : for example, Integration Directory registers but it is not assigned to a PI domain.
It is good to mention that PI instance is actually using its own SLD (local SLD) for registration.
When the problem occurs, I follow sap note 1117249 to manually register PI components within SLD and this solves the issue.
But the definitive solution will be to avoid incomplete SLD registration at restart … But I have not yet found any sap note for that kind of solution.
Il someone can help J
Thanks a lot
Nadir

Hey Caio,
Thanks for the response but it doesn't actually answer my question. But to that point, for a "basic" PI post install, which of the NWA config tasks would you run other than the "initial config" ? And would you run them BEFORE you updated the SLD content (cimsap/CRDelta) ?
NW: PI - AS ABAP (Basic Configuration for Idoc, Proxy): Maintain
PI Adapter Engine in JPR Mode
PI Demo Client
PI Full Qualified Host Name
PI Self Test for NetWeaver
PI SLD Self Registration
Specifically, I did the SAPINST - ABAP/JAVA patches - Client copy - and THEN the initial config wizard (Setup a new local SLD, ). Also, during the initial config, I clicked the box marked "This SLD will be used as a name server for development" and my PI server hostname was already in the box marked "object server name". This config took about 30 minutes. I didn't see any errors or warnings. although I didn't view the log. I did go into Java JEE services and Filter for Services with name "XPI". All were green.
THEN I tried to update the SLD content.
any thoughts appreciated.
NICK

Muse is NOT Working, Illustrator Update FAILS, Apps list is NOT Correct. What Do I Do?

I started having issues with CC a couple months ago out of no where. Mostly just with updates from CC for the apps.
I did the suggested re-installs of CC and then had to try to update by fully re-installing apps and I had funciontality but errors trying to update Illustrator and most of the installed apps did not show up in the CC interface.
Now I try to do a quick update to a site thru Muse and it tells me that it would not validate my subscription and would be canceled in 2 days.
I again followed instructions on Adobe to delete a couple of folders and try to re start Muse.
Now I get an unexpected error and cnont use the program.
I test out CC for updates and the Muse app shows up to date, Bridge app surprisingly updated fine, and as expected, once again, Illustrator errors out on the update and still my CC app list is not correct so I honestly dont know what updates I have to do on the other programs.
I checked my subscription details and everything is fine.
Not having the ability to update efficiently from CC is not a huge deal as long as I can use the programs to work. Not being abel to work because of some programing hiccup is NOT ACCEPTABLE.
Anybody have any possible paths to fix these latest issues?
Should I start by wiping the machine clean of any installs and then completely try to re-install everything?
what a pain.

UPDATE:
I got home tonight and tried to open up Muse.
This time it opened up the login screen and actually made it past the point it errored at previously.
Illustrator update stilll gives an Error 8.

Message log not correctly associated with contact

I'm having an issue where I cannot text message a particular contact or phone number. A series of steps I took seems to have exposed a glitch where the message log will not corrrectly associate itself to a newly created contact. So now when I push the SMS button on the new contact, nothing happens. Also when I manually start a new text message and add the contact to the text message and press send, the message clears from the text box and nothing else happens.
Here is how you reproduce the error:
1. I called a number and quickly hung up, just as you would do to log a number for saving later.
2. From the call log, I clicked on the SMS button to send a text message.
3. I sent a text message.
4. From the text message log, I clicked on the number at the top to save it to contacts.
5. I saved a new contact with the number.
6. If you go back to the message log, you should notice that the message log header does not update with the new contact's name. Instead it will still show the number.
7. Finally, I went to the test contact and pressed the SMS button and nothing happens.
After you add the contact like I did, it seems that the contact does not correct connect itself with the message log.
After step 5, go to the message log and click on the message log header which should still be the number. When you do this, you would think it would open up the new test contact info card, but instead it opens up a new contact card, as if the number is not saved to a contact yet. It gives me the option to Add To Contacts at the bottom.

I have the same issue. I started not being able to text only one person. I go to the contact and click on the "SMS" button and it doesn nothing. If I try to send the message directly to the number it just doesn't do anything, the message leaves the text box, but doens't show up in the conversation window. I'm not exactly sure what I did to do this, but I think it's because I added the same contact twice. Once from my incoming calls, and once from my outgoing texts. I've tried deleting all references to this number (ie the contact info, incoming/outoing calls and texts) but nothing has worked. It must be the corrupt contact thing as well.

Is there a way to reset my iphone i did the latest update on it and now it will not let me download any apps. I tried the general reset but it keeps denieing me saying that my passcode is not correct. This is the same passcode that i use to unlock

Is there any way to reset my iphone i did the latest update and now i cant download any new apps? I tried to do the general reset but it keeps telling me that my passcode is not correct. This is the same passcode that I use to unlock my phine though to get in to it.

press and hold both the power and home buttons until the apple logo appears and then let them go. Wait till the phone restarts and then try

Vendor Invoices - Entered on and parked details not correct

Hi since we upgraded to ECC6 we have noticed that the dates stored in the Header of both LIV and Direct Entry invoices are not correct.
If we Park a invoice we have a the corrected Entered on and Entered By details is correct.
Then when the document is posted the entered on date and user name then changes to the date the invoice was posted on the system.
We need to be able to see when the document was originally put on the system as a parked document so we can determine how long it takes us to process them.
I have checked in bkpf and usname and ppnam is the same and nothing in sname.
I cant see any OSS notes to say this is a known problem. Does anyone know how to resolve this.
Thanks

Hi,
Unfortunately it is not that simple.
We need to use the vendor tax date in the document date so this cannot be used.
We could also do with storing the date we scanned the invoice to workflow but there is no spare fields for this either.
Thanks

Delivery Date in Inbound delivery document not correct

Dear all,
I have a question with regards to the wrong delivery date appear in our inbound delivery.
Our inbound delivery is created via EDI output in the outbound delivery of a standard SAP cross company stock transport order. The delivery date in the inbound delivery is not correct from a business point of view.
+The correct delivery date in the inbound delivery document should be [the Actual GI date field in the outbound delivery] + [transport time (i.e. route field) in the outbound delivery].+
Either way (i.e. the Actual GI date field is later/earlier than the planned GI in the outbound delivery), the delivery date in the inbound delivery is also wrong.
Do you have any idea? We have tried to change the inbound delivery type EL by setting a flag (i.e. X) in the rescheduling (TVLK-NEUTE), and it still doesnu2019t work.
Please help.
Thanks.
Tuff

Does anyone know this problem?
appreciate some feedback.

My website background image color is not correct in Safari????

On my website my background jpg image that appears in bottom left corner is not correct in Safari. In ALL other web browsers (Firefox 3.1, IE, Opera, etc) my website looks fine! So it must be a setting or error in Safari. The jpg image in question has a background color of 191919 (dark gray) and it matches in Firefox and IE, etc... but not in Safari? In Safari my jpg image is a lighter color than rest of webpage. My header is the same type of file (jpg with #191919 background) and it looks fine... THAT is the strange part!
Is this a known issue with safari or am I doing something wrong? I have tried no color management on the image in Photoshop and with color management in Photoshop (when I save for web) and this doesn't seem to matter. It is driving me crazy. My website looks silly in Safari with this error. www.eXacteXposure.com is the website.
David

flynlyons2 wrote:
On my website my background jpg image that appears in bottom left corner is not correct in Safari. ... My website looks silly in Safari with this error. www.eXacteXposure.com is the website.
I'm not seeing that problem here, either (Safari 3.1.2 in Mac OS X 10.5.5). The image at the bottom left corner matches the background nicely.
Have you looked at your site on more than one Mac running Safari? My thinking at this point is that your web site and images are fine, but there's a problem with your installation of Safari. Do you have any third party Safari "enhancers" or hacks installed?

I purchased CS5 Design Standard about 5 years ago. Now I am trying to install second PC, but I got a message like " This serial number is not correct." I want to know the correct serial number, but I missed my ex adobe ID because I've changed my E-mail

I purchased CS5 Design Standard about 5 years ago. Now I am trying to install second PC, but I got a message like " This serial number is not correct." I want to know the correct serial number, but I missed my ex adobe ID because I've changed my E-mail address.

It is not clear to me what your issue is with not being able to sign in to your Adobe account to find the serial number. You should still be able to sign in and find your serial number if you registered the software.
If your first PC is a Windows machine you might be able to extract the serial number from it using the Belarc Advisor
http://www.belarc.com/free_download.html

Excise not captured in the MIGO & Tax calculation is not correct in the PO.

Excise Settings completed.                    02.11.2007
a)     Configuration done as per J05 Building block.( Tax Procedure TAXINN)
b)     Maintained J1ID, all steps.
c)     Maintained tax code in FTXP.
d)     FV11  Maintained for Material, vendor, Plant in combination with Tax code input tax maintained in FTXP.
e)     Checked CIN Health, all tick are green.
f)     Given all G/L accounts for Excise Transaction Type (ETT)
g)     Maintained all number Ranges.
Issue  1)
Tax calculation is not correct in the PO, tax tab
a)     JMIP is appearing 12% in condition amount, (as per condition record) but condition value is Zero, (Not calculated by the FI Pricing procedure). Screen shot for Pricing procedure, PO taxes and condition record given below.
b)     JIPC Sales tax 4% in condition amount (as per condition record) , calculated by the FI Pricing procedure is 8%, condition value is Rs 8 instead of Rs 4
Fi pricing procedure.
PO Taxes  wrong Tax calculated
FV11 Condition record
Issue  2)
While creating Goods receipt aginst PO (Tax code V2 in PO). Movement type 101, Excise tab appears at Header and Item level and we need to put the Vendors Excise Invoice and date, nothing is copied from the PO for Excise duty & sales tax.
Now we put the values for ED and Sales tax manually in the MIGO and saved the document. While display material document, excise tab is not there i.e. no excise related activiy is captured here in goods receipt.
If you need more detail, please revert on cell 093295 53235.
Please suggest.
Manish Gupta
93295 53235
[email protected]

Hai,
1.Check the condition types JMIP & JMIC in IMG - Financial accting New - FI AC Global settings - Taxes on sales and purchases - Check calculation procedure - Define condition type.
2.The condition types you have used are defined for non deductible taxes i.e., it gets inventorised, added to the material account.And also the accural key assigned to this condition types are NVV - defined for non ded input taxes.
3.Instead the condition types defined by SAP Standard system for BED & ST are JMOP & JIPS and the accurals assigned to this are VS1 & VS5.
If you want clear details mail the screen shots to my id [email protected]

Signal in not correct

Similar Messages

Maybe you are looking for