Signal no work MAC/DS

ok so i am having MAJOR issues with the airport: first i run on DSL
i am getting a signal but i cant get that signal to work, the signal level is high, but i cant get a single site to load
i have tried to use my nintendo DS to get online with the airport and it says that there is no signal...i need help, do i have a fixable problem or do i just need to get tiger and see what happens???
Desktop   Mac OS X (10.2.x)  

mythril_knight, Welcome to the discussion area!
Ensure that your DSL modem is connected to the WAN port on the AirPort Extreme base station (AEBS).
Does your ISP require PPPoE? If so enable PPPoE on the AEBS but DISABLE PPPoE on your computer.

Similar Messages

  • Quality of Elgato TV signal on my Mac

    Sorry, this isn't directly an Apple TV question but I figure people here will know...
    I'm using the Elgato Hybrid to receive TV signal on my Mac and while it is working, the quality of the video isn't good. I've tried adjusting all the software settings, but it looks considerably worse than my (old) TV and doesn't seem to match the great comments this product has gotten on website reviews. It's not stuttering (the video is smooth) but it is grainy and not sharp - like it's low resolution. Something is wrong; is there a way to figure out whether I am in fact getting all the performance out of this (compare it somehow to the pictures you guys get)? What are factors that impact quality? I'm in North America, using Comcast coax cable with a 17" Titanium laptop running 10.4.11.
    Also, I have Comcast cable - if I switch to an "Eye TV 250 Plus" instead of the Hybrid, can I get the HD channels, and in that case, will the quality be even better (larger window, sharper image)? In that case, do I need a cable box from Comcast to access the high-number HD channels (830 etc.)? If so, how will the Eye TV 250 Plus change the channels on the cable box, and can I pick up the right piece of hardware somewhere (on-line?) or is Comcast the best place to go? Assuming getting the HD channels will improve the image further, what's the minimal hardware I need to get the channel 800's feed into the Eye TV 250 Plus (I think the Hybrid doesn't do HD TV)?
    Mike

    some more dumb questions before I take the plunge and buy goods
    I want to buy a "monitor quality" TV - Elgato [cost $150 and can be used on analogue / digital / even Fox] seems to be the simple key to turning a good monitor into an even better TV [2 meet the eye - the Apple 30" and/or the Dell 30" have resolutions of 2560 X 1600 - not sure what these numbers read but they look good, relevant to the best TV in that size
    Next problem: to run a stand alone monitor as a TV [in my place on a kitchen wall - hence need it more as a TV rather than as a computer but I can see where a computer could be useful] using Elgato it will need to be connected to a mac computer => if this is correct what is the cheapest way forward
    Solution, possible => could my imac run en external monitor at a distance [upstairs => downstairs via wireless or cable]
    Hope you can help

  • Intermittent HDMI signal on my Mac Pro late 2013

    Brand new Mac Pro. Used for short periods of time for a week with no problems. After these few days, during a little bit longer session of work, I got display problems. Intermittent output signal by HDMI cable with image disappearing from monitor and coming back for some times. Problem occurred both in 720P and 1080i mode. The problem appeared and disappeared for several times. During one of this occasions also some bad green pixel remained stuck on the display.
    Left the Mac on for all the night, this morning I do not notice any problem. Does anyone knows which kind of problem I got??
    It seems to be a graphic card problem isn't it??
    Thanks for help to everyone.
    System: Mac Pro late 2013 - 6-core - 32 Gb ram - 512 Gb HD - FirePro D500 3 GB - Mavericks 10.9.5

    Nothing connected to Thunderbolt ports.
    Do I need to to reset SMC and PRAM anyway??
    The Mac is connected to the Tv/monitor through my Bose LifeStyle.
    Bose LS is setted to 1080i resolution and upscales the signal of the mac when in 720p.
    Already tried at 1080i on 1080i and changed HDMI plug but problem shortly occurred.
    Same device used in tha same way for years with Mini Mac without problems.
    Is it possible there is some conflict between output of the Mac PRO HDMI and Bose LS??

  • Toshiba 32C120U "no video signal" from my Mac Mini using HDMI to HDMI.

    My Toshiba 32" 32C120U is not getting video signal from my Mac Mini. I bought the Mini for my son and this is his TV. I have hooked up the Mini to my older 22" Toshiba and my 56" Samsung with the same HDMI cable and it works great on both. What the heck is wrong with my son's 32" Toshiba? I did update the firmware on the TV and the Mac Mini has been completely updated as well.
    I have also tried both HDMI 1 and HDMI 2 ports with his Xbox with success, so both ports work. I have also tried both ports with the Mac Mini and there is "no video signal" on both ports. I noticed that when I hooked up the Mini to the other TVs it automatically selects the best video setting, so there is obviously some communication that happens between the Mini and TV, but that is not happening with my son's TV.
    Any suggestions would be greatly appreciated.
    Thanks in advance,
    John

    I solved my issue . . . returned the Toshiba for an Insignia . . works great.

  • How do I access my work mac from my home mac?

    how do I access my work mac from my home mac?

    Your best choice would be to use Back to My Mac with your iCloud Account. For more informatio please see the following topics.
    OS X: Using and Troubleshooting Back to My Mac with your iCloud account
    http://support.apple.com/kb/HT4907
    OS X: About Back to my Mac security with iCloud
    http://support.apple.com/kb/HT4908
    Hope this helps you and let us know how it goes.

  • How can I erase the data on my 2009 macbook pro that won't turn on because of a faulty motherboard? Do I just remove the hard drive, install it in a working mac, and erase it that way?

    How can I erase the data on my 2009 macbook pro that won't turn on because of a faulty motherboard? Do I just remove the hard drive, install it in a working mac, and erase it that way? Thanks.

    You put the internal drive in an enclosure. If you choose to keep the drive, you don't need to erase it.
    (110687)

  • No picture on TV and no clock on STB, but signal is working?

    I'm hoping someone can help me.  I just got FiOs recently, and my roommate and I have two TVs set up.  One TV is functioning fine with great service.  The other one, I have tried to set up and Verizon tech support tells me that the box's signal is working, but the TV screen is completely black and I can't get the time to load on the set top box (QIP2500-3).  All of the cables appear to be plugged in, screwed in, and tightened.  Would there be any benefit to my switching the coax cable to a red/white/yellow cable input set, or is there another solution I'm not even thinking of?
    Hoping someone can help!

    If your STB is conencted to the TV via a Coax Cable then the TV will need to be tunned to channel 3 or 4.
    If your TV has Composite Inputs (Red/White/Yellow) then you can also use them and switch the inputs on the TV.
    Once you get the TV setup properly there is a setting in the STB Menus that will allow you to adjust what dispalys on the front of the STB.
    Message Edited by BrianMcD on 08-20-2009 11:14 PM
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
    If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Cannot copy files from my work Mac to my PowerBook at home using ARD 3.1

    I'm having an issue copying files from my work Mac to my PowerBook at home using ARD 3.1. Both machines are running OS 10.4.10 and have all of the available updates have been applied. When I connect to the Mac at work using ARD, I can see everything without any problems. However, when I attempt to copy a file onto my PowerBook desktop, I lose my connection to it and ARD tries to re-establish a connection and just keep looping. I'm stumped as to why this keeps happening. When I try the above from work using my PowerBook, there are no problems. Could this problem be related to my DSL Carrier (Verizon). Anyone have any ideas? Any help or suggestions would be greatly appreciated.

    Hi Jeff thanks for that, the only problem is I cant update any of the system software at work
    And I cant just copy the folders over and use my iPod as a hard drive to take them home and put them on my iTunes as the file names on some tracks are to long

  • Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5  and it will not open on the iMac the only change is the my new iPhone number is  OS.  Any ideas?

    Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5  and it will not open on the iMac the only change is the new Maverick OS from the macpro Lion OS.  Any ideas?
    <Personal Information Edited by Host>

    Setup Assistant and Migration Assistant do not restore MS Windows, it only does the OS X partition. All of your Windows stuff must be backed up and restore using a MS Windows application. If no one on this forum is able to answer your question then I'd repost it on a Parallels forum to see how other Windows users approach this.

  • TS1398 I have an iphone 5. My phone is not letting me pick up a wi fi signal at work or places I go to. I can however pick up the wi fi at home and when I connect to my cellular device. My signal is far weaker than my husband's and children's phones who h

    I have an iphone 5. I am having problems accessing wi fi. I can get a signal at my home however my phone stopped my wi fi signal at work and also anywhere else I look for a signal. My husband and child have an iphone 4 and a 4S and they get far better signal than me. They can also pick up our secured wi fi at work but I can't.  My phone is constantly looking for a signal but no signal is given. I have checked all my settings and went to my local O2 shop but I could not get a signal there. They told me to contact apple. Any one else have this problem with their iphone 5?

    First of all, you should always save you photos on computer like any other digital camera.
    Backup on iCloud or iTunes only backup your Camera Roll. The other photos should be already on the computer.
    Note: Photos are not saved in iTunes, it's only a conduit between your iPhone and your photo managing software on computer.
    What computer do you have?

  • Laptop crash with i tunes library. Have recently sync with my work mac but I am missing all my old songs.  Please help.   I tunes novice.

    My laptop  crashed with mine and my husbands I tunes Library.  I have sync my i phone with my work mac but I am still missing some of my songs.
    My husband was unable to do this as his i phone broke too and he has no music at all. 
    Please help.

    Apple devices are designed to sync with a single library. If you move the device to a new library iTunes will suggest wiping the device and reloading it with the contents of the library on the new computer, even if most of the content is identical. For an iOS device this process would also delete and reinstall any applications which would discard and settings or saved data associated with the apps. You probably don't want to do this.
    Ideally you would have migrate the working library from the computer previously used to manage the device (the laptop) to the computer you now want to use (the desktop) before adding other new content into the new computer's library. That way the device would have easily moved from syncing with one machine to the other.
    I'm not quite sure what the best next step is at this point. Does the desktop library sync with any other devices?
    tt2

  • I have a work Mac, an air book, a home Mac; husband has desktop and laptop. That makes 5.  My work computer was replaced and I do not know what the company did with it.  I am not allowed to deauthorize all. Any way around the year limit?

    I have a work Mac, an air book, a home Mac; husband has desktop and laptop. That makes 5.  My work computer was replaced and I do not know what the company did with it.  I am not allowed to deauthorize all because I did this within the last year when I got my new airbook. Any way around the year limit?  I don't know if I can find my old computer and I don't want to wait months to be able to play my ituens purchases on my new work computer.

    If oyu already used up your "deauthorize all" option, you need to contact support so they can make an excemption:
    http://www.apple.com/support/itunes/contact/

  • I do all the steps to set wirelessly my TC but when i do my network can't find it. i don't have a modem near by but i have good signal to the mac. what am i doing wrong?

    i do all the steps to set wirelessly my TC but when i do my network can't find it. i don't have a modem near by but i have good signal to the mac. what am i doing wrong?

    Since you mention that the "modem" (which I'm guessing is a wireless router) is not close to the Time Capsule, I'm guessing a second time when I ask if  you are trying to configure the Time Capsule to "join" your network using wireless only.
    Is that correct?

  • I have installed my iTunes account on works mac how can i now remove it?

    I have a works mac book and i put my Itunes account on there. i am now leaving the company and need to hand back my Mac book and I cannot get rid of my account. What can I try next to remove it?

    iTunes Store: Authorize or deauthorize your Mac or PC - http://support.apple.com/kb/HT1420 - and another helpful post: https://discussions.apple.com/message/17828050
    Your library and media are located in your Music folder in a folder called iTunes.  Delete the entire iTunes folder (and empty the trash).  If you want to transfer it to another computer, make sure you copy it to a temporary drive first.
    Did you use this computer to sync an i-device such as a phone?

  • User error trying to FTP my work Mac

    I know the various FTP settings are discussed at length and I promise I have tried all of the ones that look likely.
    I am trying to access my work Mac from my iBook, the desktop has a fixed IP address and is connected to a wired router/adsl modem. I have enabled FTP in prefs and disabled the firewall and router's as well, port forwarding is set for 20, 21 & 22 to the Mac's local address.
    Where am I going wrong? Help, please

    Since you have control of both machines I would strongly suggest that you use SFTP which has the advantage of only using a single port (22), hence only a single forward on your router, as well as encrypting your traffic.
    On your desktop you need to enable "Remote Login" which automatically activates SFTP.
    On your iBook you will need to use an FTP client that supports SFTP - most modern ones do but Finder does not.
    Graham

Maybe you are looking for

  • Can we use OWB dimesnions in OBIEE ?

    Hi all, Iam new to OBIEE reporting. Can any one of the experts clarify my question? 1. As per requirement Developing the Dimensions in OWB, can we use them in OBIEE 11g and am I goin to get the funcatinality of drill down. Or do we need to create sep

  • Mail application keeps crashing

    Every time I go to open Mail it crashes. Please help! If this helps, here is the error report: Process: Mail [601] Path: /Applications/Mail.app/Contents/MacOS/Mail Identifier: com.apple.mail Version: 3.1 (914) Build Info: Mail-9140000~1 Code Type: X8

  • This item is over 20MB. You must connect to a wifi network or use iTunes on your computer to download it.

    Verizon wireless network - unlimited data plan. iPhone 4 - iOS 5.0 "This item Is Over 20MB You must connect to a Wi-Fi network or use iTunes on your    computer to download it." This message was given when trying to update an app I already had instal

  • How to detect DataGridColumn's width

    Hi, When I resize DataGridColumn, may I know if existing any methods to detect DataGridColumn's width after mouse release? Thanks,

  • Insert to timeline from viewer VIDEO only

    I have a clip in the viewer that has audio and video. In the timeline I want to replace only the video track with this clip from the viewer. How do I insert the VIDEO portion of the clip only? Right now I have to move the clip to the timeline, unlink