Signal reception and/or antenna

Hi! I just recently updated my blackberry 9300 OS 5 to OS 6. The first time it was interrupted, so I downgraded it back to OS 5 and then re-install OS 6. Since then, I've been experiencing intermittent network reception. Most of the time there's no network at all. I already called my network provider about it and they said that all the settings on my account are all up and running. I already tried the reboot, pull-out battery and change sim and they all show the same result. I've also tried the back-up and re-store method but its still the same.
The new OS is all good but I can't really enjoy it without signal/network reception. Maybe something happened with my antenna or what. Please help.
Thanks!

Hello Heather!
I have the same frustration with Globe Telecoms as they always have intermittent network issues. I think it just coincidentally happened that you upgraded the device OS. Upgrading Blackberry's operating system really doesn't affect coverage. You should talk to Globe about coverage issues.
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Similar Messages

N8 poor signal reception and other hardware issues...

I have always been a Nokia fan . I started with Nokia 6600, then N70, then N82 and now a Nokia N8.
However, I am facing the worst experience with N8 reception issues.
The problems faced are as under :
1) Poor Signal Reception Issues - Signal strength is weak and is constantly fluctuating compared to other Nokia Phones. At my workplace, if Nokia N82 displays 5 bars, N8 would display only 1 or 2 bars.
2) Phone freezes many times. Whenever an Alarm is enabled, phone freezed much more.
3) Purple Tint in the display. Nokia Service Centre says that its normal but according to me, they are just ignoring this issue.
4) Vibration is weak : I often do not realize when the phone is vibrating in my pocket !!
Upcoming Symbian Anna will just improve the user interface but will not be able to solve these hardware issues.
If Nokia plans a hardware update facility for N8 users wherein they can fix the signal reception issues and increase the RAM to 1 GB atleast, I would retain this phone for few years.
But, now, I intend to switch to Samsung Galaxy S II.
Your views solicited.
Regards
MODERATOR'S NOTE: This post has been edited as we do not allow the discussion of speculations concerning products or services which have not been officially announced by Nokia.

sats_24 wrote:
I have always been a Nokia fan . I started with Nokia 6600, then N70, then N82 and now a Nokia N8.
However, I am facing the worst experience with N8 reception issues.
The problems faced are as under :
1) Poor Signal Reception Issues - Signal strength is weak and is constantly fluctuating compared to other Nokia Phones. At my workplace, if Nokia N82 displays 5 bars, N8 would display only 1 or 2 bars.
2) Phone freezes many times. Whenever an Alarm is enabled, phone freezed much more.
3) Purple Tint in the display. Nokia Service Centre says that its normal but according to me, they are just ignoring this issue.
4) Vibration is weak : I often do not realize when the phone is vibrating in my pocket !!
Upcoming Symbian Anna will just improve the user interface but will not be able to solve these hardware issues.
If Nokia plans a hardware update facility for N8 users wherein they can fix the signal reception issues and increase the RAM to 1 GB atleast, I would retain this phone for few years.
But, now, I intend to switch to Samsung Galaxy S II.
Your views solicited.
Regards
MODERATOR'S NOTE: This post has been edited as we do not allow the discussion of speculations concerning products or services which have not been officially announced by Nokia.
I am agree with poor signal issue with nokia N8. I have two cell with one is N8 and other one is N26 with nearly 4.5 year old but at same place Nokia N8 showing very poor quality of network signal compared to N26. So for same network provider with two different cell with same manufacture how can drastic different that is also investing nearly RS.22000!
Please resolve the issue ASAP.
Regards,
Praful

How can I boost ipad3's antenna signal reception?

My Wifi router name don't appear in wifi networks list when I'm in the bedroom, where as all other devises like laptop, Blackberry can see the wifi router signal very well. If I keep my ipad3 very near to the wifi router it works well.
The distance between wifi router and bedroom is not even 10 meters
How can I boost ipad's antenna signal reception to see my wifi router?
I already reset network settings and toggles airplane mode. Upgraded ios to the lastest version.

There's no hardware solution.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My ipad2 is getting lazy with the wifi. On any router it doesn't get the signal by itself, unless I'm so close that the pad and the antenna are touching. Other solution, to turn off and on again the wifi button on the iPad. This strange behavior is new...

My ipad2 is getting lazy with the wifi. On any router it doesn't get the signal by itself, unless I'm so close that the pad and the antenna are touching. Other solution, to turn off and on again the wifi button on the iPad. This strange behavior is new, before my iPad was blazing fast at getting any known wifi connection. Sme help please ??

it sure sounds like the battery is defect

My Take on the Reception and Slow Download Speed Issue

I seriously believe that the reception problems are a result of something that AT&T has done... Here's why. I started having issues with reception variation and very slow download performance BEFORE the release of iPhone 4 or iOS4. I went to AT&T and got a new SIM. No improvement. I complained at the Apple Store about the variable reception, and the fact that when downloading, the phone got extremely hot to the touch. Because I have been a good Apple customer, the Genius replaced the phone. No improvement. I only upgraded to iOS4 after getting the refurbed "new" phone-- the new OS hasn't really done anything for me other than shorten my battery life..... I am getting pretty tired of sitting in one physical spot, and watching my signal strength go from 5-bars 3G to 1-bar EDGE to "no service" in the span of a few minutes.... Somebody had better do something about this issue, or it's back to Sprint with the new HTC Evo 4G..... Never had reception issues with them!!

It could be a bit of a design flaw but it could also be affected by iOS4.. any phone with an ariel when hold against skin makes the signal drop period! The only reason its more news worthy is because its actully part of the case.
It certainly does need fixing but a software update could help improve it for both iphone 4 and 3G/3GS. Ive heard the older models have been suffering this too.
The reception issue didnt really bother me that much I hold it naturally in my right hand and I dont get a signal issue mainly because I noticed my finger doesnt make contact with the space between the two antennas but then if I apply a finger over the space seprating the antennas the signal does indeed drop its like the two seperated antennas cancel eachother out.
But I know having to buy a case is a bit stupid when it should work without it but for a phone that cost 500-600 why the **** wouldnt you want to protect it?
Personally I love the phone the camera is awesome especially the quality of the front facing camera it looks amazing as good as the 3 mega pixel camera on the 3GS.
The best thing though is definatly the retina display, it looks beautiful. The main thing I liked about the screen tho wasnt the shapeness and quality but the fact that I found it hard to tell the difference between the black colour of the case and the blackness of the screen especially when watching a video with the black bars on the sides of the video,the contrast ratio alone is pretty epic.

My iphone 5 has a bad signal reception LTE turned off any suggestions

I purchased my Iphone 5 last November 2012 by Cosmote Greek network provider.
I am using an iphone 3GS as well and I can compare the strength of the signal reception all time.
Usually the 3GS has 3 signal bars more than the Iphone 5 which many times goes with no signal. The LTE is turned off as well any suggestions?
Thanks

I'd just like to say that ahs70's post on Dec 1, 2013 at 1:17am on Pg. 9 worked for me as well: https://discussions.apple.com/thread/5338609?start=120&tstart=0
If your iPhone's battery is acting up you need to determine if it's a software issue or a hardware/battery issue. To do that, after syncing your iPhone, erase/hard reset all data and settings from your iPhone to what it was from the factory as new. This can be found in Settings/General/Reset/Erase All Content and Settings. Then test it out for a day or two. If it's still acting up then it's likely a hardware issue and you will need to get your battery replaced. If your warranty is done than check out this link to get a battery kit to replace your iPhone battery yourself: http://www.ifixit.com/Store/iPhone/iPhone-5-Replacement-Battery/IF118-001#produc tDescription
If your iPhone is now working properly after hard resetting it than it's most likely a software issue. This battery issue only started after upgrading to the new iOs7, so it is obviously related to the update not properly installing itself. What has worked for me and many others is to manually update to iOS 7.0.4 using the full downloaded version of the update which is about 1.32 Gigs.
But first you need to find out what model of iPhone you have, click here to determine if it's GSM or CDMA: http://support.apple.com/kb/HT3939?viewlocale=en_US&locale=en_US
Then go here and scroll down to download the iOS 7.0.4 complete update for your device: http://www.downloadios7.org/download-ios-7-0-4-ipsw-file.html
Then scroll up on the download page and follow the instructions of updating your iPhone manually following the instructions below: "IPSW with iTunes"
And your done.
Problem solved.
I only posted this because it was a very frustrating problem that no one really seemed to figure out a solution for.
I hope this helps.
Emile Beaulieu

Nokia 3315 with cradle and external antenna(car an...

I have an old 3315 and I use it on a boat with an external antenna to get a better calling range.
My old 3315 is now having repair problems and I want to buy (on eBay) a more modern phone but still use the cradle and external antenna. A problem with the 3315 is that they are becoming uncommon and the ones that are available have been well used and often have tech problems now.
I see that the 3310 has a similar shape and no doubt the cradle fits it also. I have the antenna on a long piece of coax cable and pull it up the mast on the sailboat to improve the reception.
Can anyone give me some help with this? The more modern I go the more features I get (eg mp3 player,radio reception) however I still want to retain the existing external antenna setup as it is great for camping and boating to stay in touch.
Thanks
Peter

Also, what is the length of the cable, and what is the model No of the cradle?
I have a 3310 and can test how well it works with your setup.

N97 weak signal reception

I have the NAM N97 for 3 weeks now and I am having a weak signal reception on some places that I never had this problem before when I was using the 5800 !! yesterday at was at starbucks in broadway and the people around me where using their phones for calling and messaging while my N97 showed the messgae ' NO Signal' when I finished my cofee and about to leave the place the phone showed a weak signal ( one bar ) when I reached the main enterance and when i went out the signal returned to normal !! today at the hospital 1st floor at showe 1 bar only and sometimes tha signal went off completely !! I checked my brothers E71 and it had 3 Bars !!
Does anybody have the smae problem (Weak Signal) ? do I have to send it for repair ? at home and in open areas the phone shows full signal or at least 3 Bars !

I am afraid it is a phone issue, look a this: /discussions/board/message?board.id=smartphones&thread.id=144913

Weird! Not receiving SMS (Texts) but have reception and 3G

Hi all,
Haven't had a problem with my iphone 4 until i believe I upgraded to the 4.1 and changed the case.
Basically when I am at home and only appears to be at home and round the area I live I do not receive texts. The phone is showing 2 and 3 bars of reception, I can make calls, send text, send emails but for some reason not receiving texts. However when i make a phone call or receive one all of a sudden I get an influx of text messages come through.
I have reset the NETWORK SETTINGS
I have reset the ALL SETTINGS
I have restored the iphone through itunes
Can any one help to solve this problem?
Cheers

In my opinion, this is probably just a reception issue at your home. If SMS works everywhere else but your home, I think the handset is fine. Do you live in a concrete bunker or steel building?
SMS uses the carrier or signalling channel and not necessarily the voice or data streams. It's the signalling channel that tells the phone that you have an incoming call or are making a phone call. So, theoretically, if you can make or receive a call, you should also be able to make/receive SMSs.
Please let us know what happens.

Poor Signal Reception Range Satellite L55-B5170sm

Hey Im experiencing poor reception on my Toshiba, it works great but it just dont get as far away as other laptops which makes me thing that the wifi receiver is really lacking some range.
Everything is working good but when I approach the meeting room it disconnects and other laptops dont. Can you explain why is that?

Keith - I have a similar issue that I wonder if you can help with please.
my parents have BT infinity in Room A and get great wi-fi signal and speed in that room. In the living room only 10 metres away, the signal is down to one bar of reception and intermittent.
i have tried many of the recommendation on these forums such as unplugging the microwave, cordless phones and nay other electrical devices. Have even done th behest to move the modem closer within the limitations of the cable lengths. None of this makes a difference.
so in line with the link above, I purchased a tp link powerline wireless unit. This carries the signal over fine via an Ethernet cable linked to the access point but there is no improvement to the wireless signal. The original BT wireless signal stays the same and the new to link wireless signal is even worse even sitting right next to the access point. I have tried different channel settings on both networks but to no avail.
am at my wits end and having spent £70 on the tap link system, am nervous of spending any more to find that doesn't work either.
my parents arenhug technical folk and I won't be over there for a while yet so don't have the bilty to test things much so was wondering where you think it could be best to start? Could I link an extra device from the access point perhaps?
any ideas would be most welcome.
thanks,
simon

Signal Reception Problem!!

I have had my new Q10 and the signal reception is terrible. While I was on call, I have very frequent call drop also the voice to the other party getting week in between.
I checked with Etisalat (in Abu Dhabi) service provider and everything is okay from their end. Earlier I was using BB9780 and this call drop problem was not there. Any solution

I am also using a Q10, carrier etisalat-UAE
Frequent call drops. Very sad to see Blackberry going like this....Loosing customer confidence at an alarming rate.....Used a BB 8310 > 8910 >9790 and now a Q10....

How to solve problem - " Safari cannot open page because it isn't connected to the internet" but the airport is ok. signal full and i have n IP address.

How to solve problem - " Safari cannot open page because it isn't connected to the internet" but the airport is ok. signal full and i have n IP address. and i m using Macbook pro.
OS snow leopard and above...

Do you have this problem with all websites, or only some? If only some, which ones?

10g Signal Handlers and Dynamic Binding Problems on Mac OS X

I have the following env vars set up, and it seems the client libs show a deadl\
ock behavior post installation. SqlPlus exhibits a similar problem with 10g cli\
ent libs on the Mac, since it simply hangs for 20 secs before returning the pro\
mpt. I have G4 10.3.4 Mac, and 3.3 (1640) gcc, and still haunted by this probl\
em...
ORACLE_HOME=/Users/Oracle/10g/orahome
ORACLE=ORACLE_HOME/bin
ORACLE_BASE=/Users/Oracle/10g
DYLD_LIBRARY_PATH=/Users/Oracle/10g/orahome/lib
a) ktrace sqlplus user/pass@db
b) kdump -R | grep sigaction gives:
885 sqlplus 5.877734 CALL sigaction(0x2,0xbffff500,0xbffff570)
885 sqlplus 0.001252 RET sigaction 0
885 sqlplus 0.002032 CALL sigaction(0xd,0xbfff90f0,0xbfff9160)
885 sqlplus 0.001831 RET sigaction 0
885 sqlplus 0.001293 CALL sigaction(0x12,0xbfffb6e0,0xbfffb750)
885 sqlplus 0.001234 RET sigaction 0
885 sqlplus 0.001551 CALL sigaction(0x12,0xbfffbda0,0xbfffbe10)
885 sqlplus 0.001401 RET sigaction 0
885 sqlplus 0.001331 CALL sigaction(0x2,0xbfffd090,0xbfffd100)
885 sqlplus 0.001333 RET sigaction 0
This shows a 5.9 sec delay for the first sigaction, and a full response is received some long 20 secs later on the prompt.
Some feedback from engineering regarding this issue since the 9i release has been:
"This is a known problem with signal handlers and the lazy binding we have on Mac OS X. A small change to how Oracle library's signal
handler is installed using _signal_nobind(3) and
_dyld_lookup_and_bind_fully(3) could help to solve this problem.
The problem that we are trying to avoid is a possible dead lock from
code that could be called in a signal handler when the thread that
gets the signal is in the middle of lazy binding a symbol. So when a
signal handlers installed the default action is to cause it to be
bound fully. This is made very expensive by the mismatch of the
interfaces to signal(3) and segvec(2) like routines which are passed
an address and the dynamic linker that wants a global symbol name. So the end result is to call the routine _dyld_bind_fully_image_containing_address(3) with the address of the signal handler to be bound. Which binds everything in the image (in this case the Oracle shared library).
We have had problems like this before. For example: [This is what is
done in usleep(3)]
usleep()
/* code removed for this example */
setvec(vec, sleepx);
#ifdef __DYNAMIC__
_dyld_lookup_and_bind_fully("_usleep", NULL, NULL);
(void) _sigvec_nobind(SIGALRM, &vec, &ovec);
#else
(void) sigvec(SIGALRM, &vec, &ovec);
#endif
static void sleepx(int unused)
ringring = 1;
The use of _sigvec_nobind(2) (or _signal_nobind(3) ) and the use of
_dyld_lookup_and_bind_fully(3) will cause just the needed symbols used by the signal handler. "
It seems this issue hasn't been resolved in the most recent 10g client release.Can anyone shed some light one this issue?
For better demonstration, here is a series of steps we took here:
sigaction.c - C file produced by "proc sigaction.pc"
sigaction.pc - ProC source file
gcc_sig* - Shell script to compile sigaction.c
ktrace.sigtest - raw ktrace output from running sigtest
ktrace.sqlplus - raw ktrace output from running sqlplus
kdump.sqlplus - output of kdump -R on ktrace.sqlplus
kdump.sigtest - output of kdump -R on ktrace.sigtest
sigaction.lis - auxiliary file produced by proc
1. sigaction.pc:
#include <stdio.h>
#include <stdlib.h>
#include "/Users/oracle/10g/orahome/precomp/public/sqlca.h"
int main(int argc, char **argv) {
char user[30], passwd[30], db[40];
char con_str[100], date[10], *icp;
strcpy(user, "XXXXXXXX");
strcpy(passwd, "XXXXXXXX");
strcpy(db, "db_name");
sprintf(con_str,"%s/%s@%s",user,passwd,db);
EXEC SQL CONNECT :con_str;
EXEC SQL SELECT SYSDATE INTO :date FROM DUAL;
printf("SYSTEM DATE = %s\n",date);
EXEC SQL COMMIT RELEASE;
2. gcc_sig:
#!/bin/sh
CFLAGS="-I$ORACLE_HOME/precomp/public -I/usr/include"
CFLAGS="$CFLAGS -I$ORACLE_HOME/lib -L$ORACLE_HOME/lib"
ORALIBS="-L$ORACLE_HOME/lib -lclntsh $ORACLE_HOME/lib/nautab.o $ORACLE_HOME/lib/naeet.o"
CC="gcc -g"
PROG=$1
OUTPUT=$2
$CC $CFLAGS $PROG -o $OUTPUT $ORALIBS
3. Generate the rest of the output files for your viewing of the results based on the commands provided above.
Thanks!

It's a delay, not a deadlock, that originatesfrom the way Oracle
libraries handle dymaic bindings.to "dynamic" bindings. Maybe prebinding could help ?
export DYLD_PREBIND_DEBUG=1ronr@[email protected]:/Users/ronr
sqlplus "/ as sysdba"dyld: sqlplus: prebinding disabled because library: /Users/oracle/product/server/10.1/lib/libsqlplus.dylib got slid
dyld: in map_image() determined the system shared regions ARE used
dyld: 2 two-level prebound libraries used out of 5
Ronald
http://homepage.mac.com/ik_zelf/oracle/

Phone signal drops and says 'searching...' no idea what to do

Half way through calls or after calls the phone signal drops and i can't get it back unless i switch on and off numerous times. THis has been gong on to a greater or lesser degree since I got the phone a year ago but has got much worse recently.
i have tried resetting all settings, as per the o2 advice. They have told me to go to the apple store but I am not hopeful that they will help and as it is a long way I don't want a wasted journey. I have swapped sims/ phones with my partner who has a 3g iphone and he doesnt have the same problem so it is not related to where i am geographically or my sim. any ideas?

I have the same problem after I have update my iPhone 3G to iOS 4.1.
Immediately after the update my simcard was demagnetized (it was unusable). So I had to buy a new sim card but after a couple of day more times a day the sigal drops down and I have to switch off/on.
My iphone has never had any problems untill the update.
My operator is Vodafone Italia.

Signal Processing and LabVIEW Expert Full Time Position – London, UK

1x Signal Processing and LabVIEW Expert - Full Time Position – London, UK
1.0      Description:
As a Signal Processing/Software Engineer, you'll be part of a team that is responsible for developing applications based on large high speed data analysis for a large green energy project. Your skills must include a knowledge of Waveform analysis and understand the concepts of cross correlation, Fourier Analysis, Spectral analysis and other similar items.
The position ideally requires someone of CLA level of LabVIEW program to act as the project lead on the programming and technical levels of the system.
2.0      Duties and Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦     Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦     Understanding of the data acquisition side of the system and previous experience using National Instruments hardware and DAQmx
◦     Knowledge of Power engineering, Volts, Amps, current, Power Factor etc.
◦     Providing timely, accurate and effective solutions to technical problems.
◦     Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦     Reproducing and troubleshooting problems and incompatibilities.
◦     Delivering technical presentations and demonstrations to customers, colleagues and partners.
◦     Ability to project manage and understand how to keep on track with a Microsoft project based externally monitored project.
3.0      Qualifications & Requirements:
◦     Minimum second class higher honours degree in engineering or science related field, such as electronic engineering, physics, mechatronics or computer science.
◦     Basic Knowledge of text based programming languages.
◦     Experience in either LabVIEW, minimum of three years full time and at CLA level, or capability to reach there in a short space of time with the relevant training.
◦     Experience in a second language such as JAVA, C and C++ is strongly preferred.
◦     Have a vast experience of signal processing, both digital and analog.
◦     Although not required, but must have skills to pass the Certified LabVIEW Developer exam and CLA within the year.
◦     Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦     Knowledge in instrumentation & control, and industrial automation, is strongly preferred.
◦     Must be able to handle multiple tasks and enjoy working with people.
◦     Strong problem solving skills to analyse the problem and think creatively to provide a solution.
◦     Excellent written, oral and presentation skills are key.
◦     Ability to deal effectively with customers to make them successful is essential.
◦     Ability to get along with others and function as a team player as well as work effectively alone.
◦     A proactive/can do attitude is vital and a positive outlook on problem solving.
◦     Legal right to live and work in the UK. Sponsorship is not available.
◦     Must hold a full valid UK driving license.
4.0      Location:
This role is located in London, UK
5.0      Reporting:
Signal Processing Engineers will report to the Technical Director.
6.0      Salary:
Competitive salary based on level of experience.
7.0      Application:
To apply for this position please send a copy of your CV to
[email protected]
Please state the job title of LabVIEW Signal Processing Engineer in the email subject.

Hi,
I am from india.I can able to complete the projects through the internet itself.
Please let me know if any demos required to show my expertation.

Signal reception and/or antenna

Similar Messages

Maybe you are looking for