SignalExpress 2012 does not recognize cDAQ-9188

How can I setup SignalExpress to communicate with the cDAQ-9188 module? I found the system in MAX but I can see no device connected in the Channel View.

Hi Runner,
I saw there is nothing in your channel view, could you please check the version of your NI-DAQmx driver from Control Panel>>Uninstall a program>>National Instruments Software?
Here is my channel view:
And here is the version of NI-DAQmx:
You can download the latest DAQmx driver here: http://sine.ni.com/psp/app/doc/p/id/psp-268

Similar Messages

New MacBook Air 11" 2012 does not recognize 3G dongle

Hello,
Bought the new 11" 2012 MacBook Air last week. Unfortunately I can't use my 3G dongle with it. (it's a T-Mobile branded Huawei E173) The Air just doesnt recognize it. Even not as disc image. When I plug it into my 15" 2009 MacBook Pro it just works fine. Disc image with the pre-installed software pops up and it can be used to access the internet. It works fine on my 2008 Mac Mini as well and tested it on my dad's 2010 iMac as well. It just won't work in my Air. Any idea??
Thethering from my iPhone is not an option because T-mobile has blocked that. Mifi is too big for my pocket and I don't want to think about charging it all the time. So a dongle is the way to go for me.
Thanks in advance.

Ok, I solved my problem. It cost me some money but I can use a dongle in my Air now...
After reading on another forum how someone else solved this I went the following road: I walked into a Vodafone store and bought the dongle they offer with their dataplan. It's a Vodafone k3770 which is actually a Huawei as well. It has no simlock so it works with my T-Mobile sim. It got recognized immediately by the Air as a drive station and offered the Vodafone software (which cannot be installed on OS X 10.8) But the stick is being recognized as a modem in the network settings of OS X itself. The only thing I did is enter the phone number of T-Mobile *99# and I could connect! If you tick a box there to have to modem status displayed in the menu bar you can just connect by clicking the icon in the OS X menu bar. Awesome! Much better than the crappy software that comes with these dongles.
I made a deal with the Vodafone salesman: if it doesn't work, money back. But it works. But note: in different countries it may be simlocked. I live in The Netherlands and over here it's not locked. It cost me € 60,- but it's worth it because I can't work otherwise....

Windows server 2012 R2 does not recognize DVD burner as read/write device

I've seen problem fixes for this on Windows 7 but nothing on 2012 R2.
I changed the drive letter on the server (2012 R2 with all current updates) and now it does not recognize the working DVD burner as a read/write device.
The device does work correctly with other Operating Systems on the same hardware. The box is a Lenovo D30.
Any idea as to how to go about this fix. All Microsoft troubleshooter downloads run and say the problem was corrected but no luck in burning anything.

Hi,
Did you run this?
http://support.microsoft.com/mats/cd_dvd_drive_problems
Regards.
Vivian Wang

HELP FAST! Need to go to my wedding-Lightroom 4 does not recognize Nikon D800 files

I try to import my d800 nef files and Lightroom does not recognize them and will not import. I looked on the site and it SAYS it supports them but nothing. I looked for a raw plugin but when I clicked the link it would not go anywhere. HELP! I don't want to shoot my wedding with this camera if LR can't support it and I have to return it to the camera store FAST if not.

Nidhaal Halid wrote:
Nikon D 800 is supported in the latest realease of camera raw. Make sure that you update the software to the latest version or download and install the latest version of Camera Raw 6.7 from the Adobe website.
But the question is about Lightroom. And Lightroom doesn't use any version of ACR. Lightroom 4 is somewhat compatible with ACR 6.7, and fully compatible with ACR 7.x. ACR 6.7 will read Lightroom 4 adjustments when an image is transferred to Photoshop, but it will not provide access to process 2012 sliders in ACR.

I have Photoshop CS3 which I have used successfully for a number of years. I now shoot pics with a Nikon DSLR D7100. When I try to open NEF files the following flag appears: "Could not complete your request because PS does not recognize this file. What

I have Photoshop CS3 which I have used successfully for a number of years. I now shoot pics with a Nikon DSLR D7100. When I try to open NEF files the following flag appears: "Could not complete your request because PS does not recognize this file". What do I need to do to open my NEF files?? Thanks.

Thanks for the quick reply, CP
FYI, the file is a photographic panorama based on several .CR2 photos taken in July, 2012 and processed in CS5's camera RAW/Photoshop. Beyond the metadata, here are no fonts or text in the file.
1. I changed Maximize ...File Capability from "Never" to "Always" and the flattened file saved and loaded OK, though I can't figure why given Adobe's description of this option. "If you work with PSD and PSB files in older versions of Photoshop or applications that don’t support layers, you can add a flattened version of the image to the saved file...". The file saved in this manner is ~8% larger and is not my preference as a routine since I've TB's of photo files. By the way, out of thousands of .psd/.psb files, the one being discussed is the first to give me the error.
2. I've tried saving/reloading the file on another computer with Win XP Sp3/CS5...again with Maximize Capability OFF. Same problem. Turn ON Maximize Capability and it works. As with the Win 8 machine, Bridge could neither create a thumbnail or read Metadata.
3. I've purged the Bridge Cache, made sure there were no old PS page files, reset PS preferences, and disabled my 2 plugins with no change in the problem. Windows and Adobe progs are all updated. Saving to a different HDD has no effect.
The problem occurs on 2 computers (Win XP/Win 8), two versioins of Photoshop (CS5/CS6), and "Maximize" On/Off togles the problem. My guess it is a bug in PSD processing routines.
If I can't find a fix, will keep with Maximize ON and deal with the larger files that result...the cost of insurance, I suppose.
Thanks again

After installing latest Yosemite update (10.10.3) Mac does not recognize my camera

Did latest Yosemite update yesterday, and all my USB ports are having issues with storage drives, etc. Most frustrating issue is my late 2012 mac mini does not recognize my 2014 Cannon DLSR.
I have tried to connect camera through WIFI and USB ports. I have also tried the most recent Cannon drive update.
NEED HELP ASAP PLEASE. As a designer and artist I use this camera and mac for work constantly.

Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
Start up in Safe Mode. http://support.apple.com/en-us/HT1564
Best.

Time Machine does not recognize my iMac backup. Reports: not enough space; can't back up. How do I get it to recognize the backup?

Time Machine does not recognize my 430 GB iMac backup on 1 terabyte Time Capsule. Reports: not enough space; can’t back up. How do I get it to recognize the old backup and continue backups?

Thanks for the Time Machine Troubleshooting link. Apparently things have changed since 10.7.0. Backups.backupdb doesn’t exist. Path now is: Time Capsule/Data/Daru’s iMac.sparsebundle. So I did Terminal (I usually avoid Terminal) using the instruction in B6. It does not appear to be working. It went through looking for backup, preparing backup, and is now stopping backup, and the TMBackup has disappeared from the sidebar.
Well, just now Time Machine progressed to preparing backup again; the Tiime Machine Backups appeared in sidebar, and with it Backups.backupdb/Daru’s iMac/2012-04-21-112939.inProgress. So it does exist... I’ll let it run, see what happens... But that is a strange date. Today is 28.
I’ll let you know the outcome.
Oops. Just ended! Real time report: “Backup too large for disk...“ So it is not recognizing the old backup. I’ll look at those instructions again, see if I can do the Terminal thing with the backup running. I doubt I can damage anything except the existing baackup which I'll lose anywy if I can’t achieve recognition.
Daru

Maverick does not recognize my Phonic Firefly 302 Firewire. One year waiting for a fix.

Maverick does not recognize my Phonic Firefly 302 Firewire. One year waiting for a fix.

Cedip,
in September 2012, following the release of Mountain Lion, Phonic advised Firefly owners that their products’ support ended with Lion — with the possible exception of the Firefly 302 USB. Since they didn’t support the Firefly 302 FireWire under Mountain Lion, they’re not going to support it under Mavericks either. (Note that Mavericks was first released eight months ago, not one year ago.)

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

"Find my iPhone does not recognize New iPhone 5

I use my AppleID to "Find my iPhone" successfully on iPhone 4, iPhone4S, iPad, iMac. All show up. New iPhone5 iOS 6.0.2 uses same AppleID in the General iCloud settings, Contacts,email,photostream,safari bookmarks,reminders,notes, are all synced fine. I can even see how much storage is available in my iCloud account on the new iPhone5. The Problem is that "Find my iPhone" does not recognize the new iPhone 5. Yes location services is turned on. The iPhone5 can find its location in the map app, can find all other devices in "Find my iPhone" just not itself in "Find my iPhone" I tried a hard reset.
ANY IDEAS?

How about when the passcode is correct but not recognized?
I was prompted to enter a password to unlock the device when I downloaded IOS 7 several months ago.
Entered the password every single day for months, never a problem.
Yesterday I attempted to download the most recent IOS version and I was asked for a passcode before I could do that (my phone was unlocked). Online I found out the passcode is the unlocking password. It did not work and I was unable to use the phone for several minutes after 5 attempts. I just stored the phone and when home I charged it overnight.
This morning I unlocked the phone as usual and used it without a problem for emails, phone calls. etc.. Now, after not having used it for a while, I am asked for the passcode to unlock it as usual, and although I am sure I entered the right code, it is not recognized. I am unable to unlock my phone, although I have done it for months.
This is not a case of forgotten passcode! And I see it has happened to many others that use 4s and 5s iphones.
i could attempt the iTune connection fix, but it troubles me that all solutions are presented for forgotten pascodes, and in many cases actually the passcodes are not recognized. Which means, it will keep happening unless Apple offers a solution.

My computer does not recognize my printer

Dear Sir/Madam please can you help me my computer does not recognize my printer either by wireless or usb cable although I used to use it and it was good thanks ayman

Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.

PSE 10 does not recognize my printer

PSE does not recognize my printer.

Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.

My mac air does not recognize my printer.

My wife's mac recognizes our Epson Printer but mine will not. I have reset the printer settings and it does not recognizes any printers. Would love some help on this. Thanks.

My wife's mac recognizes our Epson Printer but mine will not. I have reset the printer settings and it does not recognizes any printers. Would love some help on this. Thanks.

My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

The Photosmart 5510 is AirPrint capable. You can find that information linked below. There may be something in the network that is preventing communication. To use AirPrint your router needs to support Bonjour services. Run the download below. It will let you test Bonjour services from your Windows PC. If this app can't see the printer either, then the router's Bonjour services are off, or it does not support Bonjour. Let me know what the app finds. If it can't find the printer, let me know what brand and model router you have, and I'll see if it has Bonjour services at all.
Bonjour Print Services for Windows v2.0.2
HP Web Connected Printers and Supported Cloud Services
I am a printer tech for HP.

I got an iphone 4. I had to update my macbook pro to Lepard just to sync. I updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone.

I upgraded from Iphone 3g to iphone 4. I had to update my macbook pro to Lepard just to sync. the **** thing with the new iphone 4. I bought and updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone before it will sync! It says everything on the phone now will be cleared in order to sync it with my existing info on the computer from my previous iphone. How can I just get everything from my current iphone 4 into itunes, basically add it to the info from my previous iphone 3g that is currently in my itunes? I dont want to lose what I have on my phone currently....I paid money for half the apps for crying out loud.
I was so frustrated by this when I first bought the phone that I just pushed it out of my mind and NEVER synced it. Please help...

Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.

SignalExpress 2012 does not recognize cDAQ-9188

Similar Messages

Maybe you are looking for