SignalExpress will not recognize NI USB -9211A but will recognize NI eDAQ-9172
Hello,
I am trying to get some temperature readings from a NI USB-9161 USB carrier with a NI cRIO-9211 installed. When I plug in my device signal express does not recognize it. I also have a NI eDAQ-9172 which I was able to configure in Labview Signal Express 2009. I don't know if I have a driver problem or something is wrong with the NI USB-9161 carrier. I do have one thermocouple plugged in presnently.
Thank You!
Looks like you could be having some compatibility issues - see the article below.
http://digital.ni.com/public.nsf/allkb/EC5F24EEAC6003A386257051004BFE4A?OpenDocument
Jake H | Applications Engineer | National Instruments
Similar Messages
-
Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version
Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.
-
IPod not recognised on one computer but OK on another
I manage a number of iPod nanos for my children on my PC (vista). In the last few days, one of them (pink nano)is not recognised by windows nor therefore in iTunes. I tried by 60GB iPod and had same problem. Plugged in my blue nano and works perfectly.
Tried pink nano on my laptop (xp) and works perfectly.
Using latest version of iTunes and PC fully updated.
On PC, pink nano does not appear under USB controllers, but under Other Devices as Apple iPod USB device (with exclamation mark). The device status is: The drivers for this device are not installed. (Code 28)
Can anybody shed any light on this please?If you have more then one USB port, try the other port.
-
My 16 gig iPod Nano 7th gen was put of power. I connected it to the computer and it started to turn on (the apple appeared in the middle of the screen). Then left it two minutes and the computer went into sleep mode. My iPod nano had gone off and now it will not turn on, or connect to the computer, so i cannot charge it. I am not sure if it is a problem with the usb cable. When I conntct the cable to the computer nothing happens, but then when i connect the iPod to the cable it says 'one of the USB devices attached to your computer has malfunctioned, and windows does not recognize it'. Please don't say its broken already
It probably needs to be reset. The procedure is different for different Nano models: http://www.apple.com/support/ipodnano/assistant/itunes/
-
I have new 2T iomega external HD (Mac Companion) - my Mac (2.8 GHz i7 - Lion OS) will not recognize HD if hooked up with Firewire, but it does recognize if hooked up via USB - how can I get it to recognize with Firewire?
Try a different FW800 cable and also try doing a SMC reset. If neither work try another FW800 device to see if it's recognized, if it is then you know it's not the Mac it's probably the EHD.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is not an external device connected.
If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues. -
Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?
So yu tried all of this:
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
If you had then time for an appointment at ther Genius Bar of an Apple store. -
iTunes will not recognize my Nano 6th gen. as a device. It has been recognized in the past and iTunes does recognize my Nano 4th gen. The device connects to the Mac and charges allright. All of the functions on the Nano work but want to modify my music, I'm tired of the same songs etc.
Universal Serial Bus controllers
Intel(R) ICH9 Family USB Universal Host Controller - 2934
Intel(R) ICH9 Family USB Universal Host Controller - 2935
Intel(R) ICH9 Family USB Universal Host Controller - 2936
Intel(R) ICH9 Family USB Universal Host Controller - 2937
Intel(R) ICH9 Family USB Universal Host Controller - 2938
Intel(R) ICH9 Family USB Universal Host Controller - 2939
Intel(R) ICH9 Family USB Universal Host Controller - 293A
Intel(R) ICH9 Family USB Universal Host Controller - 293C
USB Composite Device
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer. -
Will not recognize the Lucid LG when connected with USB
My Dell will not recognize the Lucid LG when connected with USB. Both the computer and phone gives a split second prompt that they are connected but then goes away immediately. After reconnecting it several times however it will finally recognize the mass storage. How can I get away from the hassle of multiple re-connections before it finally recognizes that connection?
That's some helpful information about your issue samrmusso! Some recommendations that I have for you is to try a different USB port on the computer to see if it isn't an issue with that specific USB port. Are you using the cable that came with the device (recommended) or a 3rd party cable (may not support data transfering properly)? You can also try restarting both the device and computer and retest. It's possible that there's a driver conflict on your Dell. Here's how to check for these types of conflicts: http://goo.gl/qH4m5
Keep us posted on any additional information/details about your issue.
Thanks,
MikeS_VZW
Follow us on Twitter @VZWSupport -
Why will my iPad 2 not recognize any iPod cables? I have tried two different cables in both the wall and in my laptop, but it will not register that it is receiving power, nor will the laptop recognize that they are connected.
Crizzo is right, the best way to charge is with the included power block. That said, the USB cords are interchangable as far as an of us know. (just not power bricks, iPhone and iPod bricks put out 5W of power, the iPad wants 10W and will always say 'not charging' if plugged into less power than it requires even though it will charge, just very slowly)
If you have tried to charge your iPad - with the iPad charger - with multiple cables and multiple computers and get no joy then it's time to head to the apple store and have them check it out. The 30 pin USB port can go bad - mine did - and it's a manufacturer's defect (unless there's any sort of obvious damage) and should be covered under the warranty; -
When I plug my ipod into my desk top my computer will not recognize the ipod in the usb port. I checked my usb port with one of my flash drives and it works fine. My ipod is in stuck in recovery mode, so has to be gone thru on itunes. Please help me
Yes, I think so... But what's odd here (to me) is that it actually matters what song the iPod was playing before being connected to that USB port. What happens if you connect the iPod when it is not playing any song? It seem like either the car audio system knows where to look for the iPod's song files, or it doesn't.
If you have a USB flash drive, try putting a few song files on it, and connecting it to that USB port. That's probably the primary reason for that USB port, so customer can attach USB flash drives with song files. If that works, and you can properly browse and play songs from the USB flash drive, you should just get a $5 8GB USB flash drive, fill it with your "car songs," and leaving it connected to the car audio system. That would be more convenient that remembering to connect and disconnect your nano all the time, and less wear-and-tear on the nano. -
It got A new router today and wanted to turn on apple tv but my remote app on iPad and iPhone will not recognize apple tv. Btw- I do not have apple tv remote.
It reboots it but unplugging can also rectify communication issues like this. A restore would be the next step.
-
I have a Sony radio in my car. With IOS 4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio. After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone . Any thoughts.
I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?
-
TS3274 How can I connect tv to ipad? Want it to use netflex but will not connect using USB cable.
How can I connect tv to ipad? Want it to use netflex but will not connect using USB cable.
http://store.apple.com/us/browse/home/shop_ipad/ipad_accessories/cables_docks
You should find a solution here -
Yesterday I decided to finally update my iphone 4S to the latest operating system 7. It asked me for a password when upgrading but now does not recognize the password and will not let me in. FRUSTRATED. What do i do????
Hi Rachel,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Cheers,
- Judy
Maybe you are looking for
-
Negative values in Inventory report
Dear Guys, When we are doing BW Inventory, we are facing one problem. I have searched previous topics. There some guy gave the same problem. But there is no answer. I am giving the details as per his words: We have been struggling to reload our Mater
-
How can we put excel file in a sahred folder of target system
Hi All, I have the requirement as fallows 1) I will get the data from report to an excel file. This Excel file has to send mail to the specified users in the distribution list. 2) The same excel file I need to put it in share folder like suppose say
-
Encore "Edit Preset Quality" Window Won't Open
When I tro to open the "Edit Presets Quality" window in Encore CS3, nothing happens. Well, not nothing... it seems that MAYBE the window is opening in RAM but not displaying. Why do I think this? Because if I try to click anywhere else in Encore, I h
-
Colour wheel spinning when opening files using finder
Hi all I am a novice Mac user. I think I was using Mountain Lion (i paid for it - about £20) but upgraded to Mavericks last year when prompted by my software update. I now understand from reading various online posts that this means I am now stuck wi
-
Show all frames in the timeline - CC version
Show all frames option is not available in the track header anymore. How can I see all the frames inside the clips in the timeline?