Signals going to DVCAM deck but Audio/Visuals not going through
Hello,
I'm puzzled with a situation I'm going through right now. I'm trying to copy a footage to a DVCAM tape using the DVCAM deck (DSR-25) but it isn't working.
1)Signal from FCP is going to the deck but visuals and audio aren't getting to the deck player/recorder. I say this because RECORD/STOP etc options from FCP gets sent to the deck properly (commands).
2)I am recording through Print to Video... under FILE
3)I have used GConverter (newest version) to convert a NTSC to PAL
4)Other project have worked fine going through the same method and procedures, including the NTSC to PAL conversion.
Currently, I can't come to any solutions except for perhaps re-recording and re-rendering, but if possible I would like to avoid that since that kills about 14 hours of time (although I'm starting it on another computer right now, just in case). I've tried everything I can think of including simple things like SHUTDOWN both the computer and deck, use different firewire cables, and so on.
Anyone got suggestions I may be able to try or maybe an option I am over looking?
Thank you in advance
Message was edited by: djricekcn
I can see the video on time lines including other things like the Viewer.
I have changed cables just in case, but it's only it for this one project. Other projects doing/going through the same manner are working properly.
Only thing I can really think of is something of the options isn't the same as others, but from what I can tell they are (like making sure that the Sequence is PAL and etc...even if it wasn't I should still get signal though) the same.
I'm still fidiling around with it as I type this
Similar Messages
-
Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well
If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
Not necessarily. That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio. You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise. -
The sound will no longer come through my headphones on my iPad I've tried several different headsets. The sound works as normal without the headphones but will still not come through the headphones even thoug I have tried to reset it twice. This is the new ipad with retina display and is only 2 months old and otherwise works fine. Please help!
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPad. Nothing will be lost
Reset iPad: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPad for a refurbished one for this price. They do not fix yours.
iPad Service Answer Center
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPad Repair - iFixit -
the safari can search website but it can not go through the icon. screen color blacken. solution?
Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Imported video but audio did not come over
I imported a .flv file - the video came over but the audio did not. I can see the mouse movement on the video but no sound. Any ideas?
Thanks!!!ricklab1 a écrit:
did a backup then a restore, windows 7 to windows 8.1 but non of the keytags got posted to the pictures. they did come over as tags but all were empty. any solution?
Please describe in more details what you did. The usual and recommended way to backup and restore is the built-in method of the Organizer:
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html
Was that what you did?
Your keywords (tags) are by stored by default in the catalog. You can also 'Write metadata to files' if you wish, but an Organizer restore does restore the tags of the files in the restored catalog; that is only necessary if you re-import the pictures in a new catalog or if you use another backup software.
they did come over as tags but all were empty. any solution?
Do you mean you got the hierarchy of categories and tags restored in the keyword panel, but that none of those keywords were assigned to pictures? -
Audio file not recorded through network
Hi All,
I am trying to capture audio (wave) file from audio recording device and recording that.
I am able do that successfully in single computer, but when i am trying through network audio file is not created at server.
I am using file protocol for file location. and my JMF version JMF2.1.1e
Is RTP is required to solve above issue?
i used RTP also am able to transit audio, but its not recording....
Is there any other way to solve this problem?
Please provide me any code samples or reference documentation regarding this.
Thanks in advance
jbreddybelow mentioned code used in an applet to create audio file
===================================
import javax.media.protocol.DataSource;
import javax.media.protocol.FileTypeDescriptor;
import javax.media.protocol.ContentDescriptor;
import javax.media.control.TrackControl;
import javax.media.control.FormatControl;
import javax.media.rtp.event.*;
* <p>Title: </p>
* <p>Description: </p>
* <p>Copyright: Copyright (c) 2004</p>
* <p>Company: </p>
* @author not attributable
* @version 1.0
public class Media {
public Media(String fileName, int timeInterval) {
System.out.println(" Media fileName="+fileName);
CaptureDeviceInfo di = null;
Processor p = null;
StateHelper sh = null;
Vector deviceList = CaptureDeviceManager.getDeviceList(new AudioFormat(
"linear", 8000, 8, 1));
if (deviceList.size() > 0) {
di = (CaptureDeviceInfo) deviceList.elementAt(0);
else {
// Exit if we can't find a device that does linear,
// 44100Hz, 16 bit,
// stereo audio.
System.exit( -1);
try {
p = Manager.createProcessor(di.getLocator());
sh = new StateHelper(p);
catch (IOException e) {
e.printStackTrace();
System.exit( -1);
catch (NoProcessorException e) {
e.printStackTrace();
System.exit( -1);
// Configure the processor
if (!sh.configure(10000)) {
System.exit( -1);
// Set the output content type and realize the processor
p.setContentDescriptor(
new ContentDescriptor( ContentDescriptor.RAW_RTP));
TrackControl track[] = p.getTrackControls();
boolean encodingOk = false;
// Go through the tracks and try to program one of them to
// output gsm data.
/*for (int i = 0; i < track.length; i++) {
if (!encodingOk && track[i] instanceof FormatControl) {
if (((FormatControl)track).
setFormat( new AudioFormat(AudioFormat.GSM_RTP,
8000,
8,
1)) == null) {
track[i].setEnabled(false);
else {
encodingOk = true;
} else {
// we could not set this track to gsm, so disable it
track[i].setEnabled(false);
if (!sh.realize(10000)) {
System.exit( -1);
// get the output of the processor
DataSource source = p.getDataOutput();
// create a File protocol MediaLocator with the location of the
// file to which the data is to be written
String rtpPath="rtp://192.168.101.29:49150/audio";
MediaLocator dest = new MediaLocator( rtpPath +fileName);
// create a datasink to do the file writing & open the sink to
// make sure we can write to it.
DataSink filewriter = null;
try {
filewriter = Manager.createDataSink(source, dest);
filewriter.open();
catch (NoDataSinkException e) {
e.printStackTrace();
System.exit( -1);
catch (IOException e) {
e.printStackTrace();
System.exit( -1);
catch (SecurityException e) {
e.printStackTrace();
System.exit( -1);
// if the Processor implements StreamWriterControl, we can
// call setStreamSizeLimit
// to set a limit on the size of the file that is written.
StreamWriterControl swc = (StreamWriterControl)
p.getControl("javax.media.control.StreamWriterControl");
//set limit to 5MB
if (swc != null) {
swc.setStreamSizeLimit(5000000);
// now start the filewriter and processor
try {
System.out.println("filewriter="+filewriter);
filewriter.start();
catch (IOException e) {
e.printStackTrace();
System.exit( -1);
// Capture for 5 seconds
double time = timeInterval * 0.7 * 1000;
System.out.println("TIME INTERVAL ="+time+":INT ="+(int)time);
sh.playToEndOfMedia((int)time);
//sh.configure((int)time);
sh.close();
// Wait for an EndOfStream from the DataSink and close it...
filewriter.close();
public static void main(String args[]) {
System.out.println("in side main method");
String fileName = "QQ";
for (int count = 0; count <= 10; count++) {
Media m = new Media(fileName+count+".wav", 2); -
I can listen to ITunes on my ipad on a headset but they will not play through the speaker
I can play I tunes on my iPad and listen on a headset but the iPad will not play through the built in speaker
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
Cheers, Tom -
I have a friend who uses an iPod to iMessage me and about two nights ago, my messages to him from my iPhone were no longer listed as delivered and then I started getting the message "Contact is unavailable. This person cannot be reached by iMessage at this time." I have my main iMessage email and phone number linked to my iPhone. I decided to try messaging him from an iPad that only has my iMessage email linked to it, and the iPad gave me a message saying his email is not linked to an iMessage account. After that, I tried ANOTHER iPad. This one runs iOS 5 and has a separate iMessage email linked to it and the messages were not listed as delivered, but they did not give me a failure message. I unlinked my main iMessage email from my phone and linked the secondary iMessage email to it. I still got the first message about the contact being unavailable when I attempted to send a message from my iPhone. Then, I messaged him again from the iPad running iOS 5, and the message I sent showed up on my iPhone and was listed as delivered. Is it possible this friend has blocked me? He has not messaged me for two days. I was under the impression a block would simply result in my messages being listed as delivered, not that the contact would be unavailable or that his email is not linked to an iMessage account. Is there any way to force my iPhone to send messages to him using only my iMessage email and not cell phone number? Is this actually a fluke and he has deleted his iMessage account, but the iPad running iOS 5 did not recognize that? But why would my iphone list the messages as delivered then?
After much research went with Comcast. Package includes 12mbs, phone service, all premium channels, 2 HD dvrs, 1 HD receiver. After promos end I will be paying more, but I'm getting more. Customer service before purchase and installation phenomenal. I actually set up order over phone instead of online because of the customer service. No complaints about Direct TV, but canceeling them also because from having to shop for new Isp resulted in this. My speedtest now says I am 85% faster than most of the U.S. I am very happy. I would consider my verizon problem solved. Oh, free router also.
-
Audio book appears in my downloads, has been transferred to ipod (it shows up in g drive when I plug in ipod), but when I complete the sync, and disconnect ipod, the book is not transferred to ipod
Same problem here with the same iPod- Gen4, 20 G- this started on Friday. None of the "fixes" Apple offers help because iTunes and My Computer freeze when the iPod is connected. If I disconnect while My Computer is open, it shows up briefly as the E: drive with an exclamation point and then disappears. If I disconnect with iTunes open, everything that I tried to open while it was connected suddenly pops up. I can't restore the iPod because the Updater freezes while the iPod is connected. There is no difference when I try to do these things in disk mode. The disk manager function in windows sees the iPod, but freezes up when you try and click on it.
I've run all the diagnostic tests and it passed them all. It does the same thing on other computers (all PCs) that I've tried. -
Why are audio & visual not in synch on QuickTime Pro?
Hi!
I just downloaded QuickTime Pro and when I made a "new movie recording" my voice is not in synch with my lips—there's a lag.
Why is that? Is it my processing speed? Memory issues? Preference settings I need to tweak? Or, am I just talking to quickly!?
Help!
Roma
RomaHi Roma!
am I just talking to quickly!?
Could be!
This refers to iMovie, but it may also help you:
iMovie: Improving audio and video synchronization
http://support.apple.com/kb/TA25603?viewlocale=en_US -
Video plays but audio does not!
Help please! I cannot get the audio on any of my podcast videos or videos downloaded from itunes. music files work just fine.
This apparently has just happened overnight. I could hear the audio on my videos last night, but today, nothing.
There were no crashes or other strangeness that I saw.hiya!
hmmmmm. let's first check to see if it's just the videos that you've got or any videos that currently don't have sound when you play them in itunes. this document might help with that:
Verifying iTunes video conversion and iPod video syncing using sample QuickTime files
love, b -
Trying to stream a QT video on the web but audio does not play
I've created an hour-long .mov exported out from FCP using QT conversion. I've saved the file to our sever but when you click the link on the web page the video plays great but there is no audio. When you go directly to the file on the server and open it, it plays just fine. Is this an export issue or a server-side issue?
G5 Mac OS X (10.3.9)I am exporting out as a QuickTime Movie format with H.264 compression. I've selected prepare for internet streaming and chose Hinted Streaming. It asks if you want it Optimized for Server or Make it Self-Contained. I've actually done it both ways and I can't tell any difference. We are playing the clips through QuickTime Player. Our server is a Windows 2003 R2. I talked with our IT guy about this and he seems to think that it possibly has something to do with the way I have the bit rate set up. Honestly, I am just using the default rates because I have no idea what to set them at.
Thanks -
Ipod showing up as sunk but audio/ apps not on the ipod
I recently got a new computer (dell) and want to use itunes on it so i download everything from my old desktop onto my new laptop. So i sunk my ipod to the library and it worked for a few days. When i bought the new doodle jump app it showed it as on the ipod but was not acctually on the ipod. the steps were backing up, determining apps to sync then finnishing sync and it said there was 4 steps but i think it skipped a step. Now i cant download anyhthing on my itouch and im really angry that this all of a sudden happened. I have tried using different cords and reinstalling itunes but nothing is working. How do i get my ipod to sync?
it is authorized, the ipod goes to sync and it says it did sync on the computer but never downloaded the app onto the ipod from the computer. I can download apps from the itunes store from my ipod but bought the app on the computer before i realized it wasnt working. But things like pictures i might want on my ipod wont sync on there now Say i go to the pictures section on the ipod menu and click on a folder with pictures on it to sync it will start to sync, never say dowloading pictues like it usually does and the picturesa wont be onn the computer. the ipod skips a step in the sync and its the downloading the contetn on the ipod part i want to know how to fix this
-
I just bought Game of Thrones season 2, but audio does not stay in sync with video.
I just got a PC with windows 8. When I view downloaded TV shows, audio begins to fall behind video. How do I fix?
Sorry for the troubles you are having trying to watch the standard definition episode. Now that its 2 days since your post is it there now? If not, please let me know so we can look into this further.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan -
My application involves operating a pH meter via RS-232 protocol. Other hardware are operated using an E-series DAQ board whereby waveforms are software-generated and sent to the relevant hardware using an Analog Output channel. Data acquisition is performed utilising Analog Input channels of the DAQ card that have been configured in a Referenced Single-Ended mode. When the Analog I/O channels are active erroneous readings are observed on the pH meter if the RS-232 cable is connected between the pH meter and the control PC. No problem is observed if the RS-232 cable is disconnected. What could be the problem and any suggestions on how to solve this.
Comments to your questions:
Built-in = Originally supplied on the PC's motherboard
1)I use built-in RS-232 interface
2)I use built-in Bus type
3)The RS-232 cable is shield connected
4) I'm not sure on how to check if the RS-232's digital ground signal is connected. I simply connected the RS-232 cable from the pH meter to the serial port. The serial communication works fine, with no disturbance to the pH meter if i don't initiate data acquisition.
Maybe you are looking for
-
I kept getting error issue, well, try this and it worked for me. Turn of your computer and restart then open up ITunes again then it will say that your ipod is in recovery mode, hit restore and now it should work smoothly. Worked fine for me. Hope it
-
Photoshop Album to Photoshop elements File size issue
I have used album v2 for a few years, and only import proxy files from off-line media (CD/DVD) to keep the backup file small which makes it easier to keep 2 computers on the same page..(15000 image files = 6GB) I make a backup to a portable drive mon
-
A/V Control panel greyed out
How to get that A/V Control panel in quicktime back its greyed out on the right side all functions disabled
-
Unable to set Static IP in Wicd
Wicd will get an IP just fine if I let it do DHCP. When I try and set my static IP it acts like its connecting and then just says not connected. The wicd .log has: Putting interface down Releasing DHCP leases... Setting false IP... Flushing the routi
-
Anybody have any work arounds to get iphoto working again?