Signature 171 Digital Signature Error

When I install signature 171 to IDSM2's using VMS 2.3 I get: An error occurred while running the update script on the sensor named IDS-C1-B. Detail = An error occurred at the sensor during the update, sensor message = idsPackageMgr: digital signature of the update file was not valid, use CCO to replace corrupted file
The update of the VMS management center and security monitor worked OK. Does anyone know it this signature zip file is really corrupt?
I re-downloaded and replaced the file in VMS, but still got the same message.

Upgrading a sensor via VMS is part of our standard testing procedure for a new signature update and it passed the test!
Unfortunately, for some reasons, the checksum of the file published on Cisco.com doesn't match the checksum of the file we have tested.
My apologies for any inconvenience it could have caused, we are working to have this fixed asap!
I'll post again once this has been done.

Similar Messages

  • AIP-51083:  General failure creating S/MIME digital signature: Error

    I know you guys did answer to this kind of question in several threads. But my case is bit different. Please try to help me to resolve this issue.
    OS: AIX 5.3
    B2B: 10.1.2.2 (No Additions)
    I did encrypt the message using certificates (Host & Trading Partner) and send to Trading Partner and got the confirmation. So assuming there is no issue with wallet and certificates.
    But I am not able to sing the same message using same certificates.
    (I don’t have any issue with Host certificate, I can use it for host sing but I have issue with Trading Partner certificate)
    Here the error message. I really appreciate your help.
    <MSG_TEXT>Error -: AIP-51083: General failure creating S/MIME digital signature: Error -: AIP-51083: General failure creating S/MIME digital signature: java.lang.NullPointerException
    at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart(MimePackaging.java:434)
    at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.applySecurity(MimePackaging.java:1699)
    at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createMimeMessage(MimePackaging.java:262)
    at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:110)
    at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1165)
    at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:701)
    at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:832)
    at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:531)
    at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java(Compiled Code))
    at java.lang.Thread.run(Thread.java:568)
    Caused by: Error -: AIP-51083: General failure creating S/MIME digital signature: java.lang.NullPointerException
    at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:1054)
    at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart(MimePackaging.java:392)
    ... 9 more
    Caused by: java.lang.NullPointerException
    at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:965)
    ... 10 more
    </MSG_TEXT>
    Thanks in Advance,
    Rama K

    Hi Anuj,
    Thanks for your good reply.
    I was doing same thing which you mentioned (Thats the reason encryption is working with same certificates, so there is no issue with wallet and certificates).
    in my log (debug mode) I did find some thing is interesting
    From the log,
    <MSG_TEXT>oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign alternateWrl: /oraaiad/B2BHome/Apache/Apache/conf/ssl.wlt/default/wallet1</MSG_TEXT>
    Log is looking for alternateWrl "/*default/wallet1*"
    But my wallet location which I mentioned in tip.props /oraaiad/B2BHome/Apache/Apache/conf/ssl.wlt/*default/wallet.txt*
    I know there is no location called "*wallet1*" thats the reason why it's throwing null pointer. But my questions is, why it's looking for alternateWrl? Here some of debug log.
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2009-09-04T21:56:50.336+00:00</TSTZ_ORIGINATING>
    <ORG_ID>oracle.com</ORG_ID>
    <COMPONENT_ID>B2B</COMPONENT_ID>
    <HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
    <MSG_TYPE TYPE="UNKNOWN"></MSG_TYPE>
    <MSG_GROUP>B2B</MSG_GROUP>
    <MSG_LEVEL>16</MSG_LEVEL>
    <HOST_ID>abc.abc.com</HOST_ID>
    <HOST_NWADDR>1.1.1.100</HOST_NWADDR>
    <MODULE_ID>B2B</MODULE_ID>
    <THREAD_ID>Thread-12</THREAD_ID>
    <USER_ID>oraaiad</USER_ID>
    </HEADER>
    <PAYLOAD>
    <MSG_TEXT>Utility:getPrivateKey:Exit</MSG_TEXT>
    </PAYLOAD>
    </MESSAGE>
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2009-09-04T21:56:50.336+00:00</TSTZ_ORIGINATING>
    <ORG_ID>oracle.com</ORG_ID>
    <COMPONENT_ID>B2B</COMPONENT_ID>
    <HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
    <MSG_TYPE TYPE="UNKNOWN"></MSG_TYPE>
    <MSG_GROUP>B2B</MSG_GROUP>
    <MSG_LEVEL>16</MSG_LEVEL>
    <HOST_ID>abc.abc.com</HOST_ID>
    <HOST_NWADDR>1.1.1.100</HOST_NWADDR>
    <MODULE_ID>B2B</MODULE_ID>
    <THREAD_ID>Thread-12</THREAD_ID>
    <USER_ID>oraaiad</USER_ID>
    </HEADER>
    <PAYLOAD>
    <MSG_TEXT>oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign alternateWrl: /oraaiad/B2BHome/Apache/Apache/conf/ssl.wlt/default/wallet1</MSG_TEXT>
    </PAYLOAD>
    </MESSAGE>
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2009-09-04T21:56:50.336+00:00</TSTZ_ORIGINATING>
    <ORG_ID>oracle.com</ORG_ID>
    <COMPONENT_ID>B2B</COMPONENT_ID>
    <HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
    <MSG_TYPE TYPE="UNKNOWN"></MSG_TYPE>
    <MSG_GROUP>B2B</MSG_GROUP>
    <MSG_LEVEL>16</MSG_LEVEL>
    <HOST_ID>abc.abc.com</HOST_ID>
    <HOST_NWADDR>1.1.1.100</HOST_NWADDR>
    <MODULE_ID>B2B</MODULE_ID>
    <THREAD_ID>Thread-12</THREAD_ID>
    <USER_ID>oraaiad</USER_ID>
    </HEADER>
    <PAYLOAD>
    <MSG_TEXT>Utility:getPrivateKey:Enter</MSG_TEXT>
    </PAYLOAD>
    </MESSAGE>
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2009-09-04T21:56:50.506+00:00</TSTZ_ORIGINATING>
    <ORG_ID>oracle.com</ORG_ID>
    <COMPONENT_ID>B2B</COMPONENT_ID>
    <HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
    <MSG_TYPE TYPE="ERROR"></MSG_TYPE>
    <MSG_GROUP>B2B</MSG_GROUP>
    <MSG_LEVEL>16</MSG_LEVEL>
    <HOST_ID>abc.abc.com</HOST_ID>
    <HOST_NWADDR>1.1.1.100</HOST_NWADDR>
    <MODULE_ID>B2B</MODULE_ID>
    <THREAD_ID>Thread-12</THREAD_ID>
    <USER_ID>oraaiad</USER_ID>
    </HEADER>
    <PAYLOAD>
    <MSG_TEXT>java.lang.NullPointerException
         at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:984)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart(MimePackaging.java:416)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.applySecurity(MimePackaging.java:1734)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createMimeMessage(MimePackaging.java:286)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:118)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1602)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:900)
         at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1082)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:697)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:373)
         at java.lang.Thread.run(Thread.java:568)
    </MSG_TEXT>
    </PAYLOAD>
    </MESSAGE>
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2009-09-04T21:56:50.506+00:00</TSTZ_ORIGINATING>
    <ORG_ID>oracle.com</ORG_ID>
    <COMPONENT_ID>B2B</COMPONENT_ID>
    <HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
    <MSG_TYPE TYPE="ERROR"></MSG_TYPE>
    <MSG_GROUP>B2B</MSG_GROUP>
    <MSG_LEVEL>16</MSG_LEVEL>
    <HOST_ID>abc.abc.com</HOST_ID>
    <HOST_NWADDR>1.1.1.100</HOST_NWADDR>
    <MODULE_ID>B2B</MODULE_ID>
    <THREAD_ID>Thread-12</THREAD_ID>
    <USER_ID>oraaiad</USER_ID>
    </HEADER>
    <PAYLOAD>
    <MSG_TEXT>Error -: AIP-51083: General failure creating S/MIME digital signature: java.lang.NullPointerException
         at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:1077)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart(MimePackaging.java:416)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.applySecurity(MimePackaging.java:1734)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createMimeMessage(MimePackaging.java:286)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:118)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1602)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:900)
         at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1082)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:697)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:373)
         at java.lang.Thread.run(Thread.java:568)
    Caused by: java.lang.NullPointerException
         at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:984)
         ... 10 more
    </MSG_TEXT>
    </PAYLOAD>
    </MESSAGE>
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2009-09-04T21:56:50.507+00:00</TSTZ_ORIGINATING>
    <ORG_ID>oracle.com</ORG_ID>
    <COMPONENT_ID>B2B</COMPONENT_ID>
    <MSG_ID>AIP-51083</MSG_ID>
    <HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
    <MSG_TYPE TYPE="ERROR"></MSG_TYPE>
    <MSG_GROUP>B2B</MSG_GROUP>
    <MSG_LEVEL>16</MSG_LEVEL>
    <HOST_ID>abc.abc.com</HOST_ID>
    <HOST_NWADDR>1.1.1.100</HOST_NWADDR>
    <MODULE_ID>B2B</MODULE_ID>
    <THREAD_ID>Thread-12</THREAD_ID>
    <USER_ID>oraaiad</USER_ID>
    </HEADER>
    <PAYLOAD>
    <MSG_TEXT>Error -: AIP-51083: General failure creating S/MIME digital signature
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart(MimePackaging.java:458)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.applySecurity(MimePackaging.java:1734)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createMimeMessage(MimePackaging.java:286)
         at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:118)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1602)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:900)
         at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1082)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:697)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:373)
         at java.lang.Thread.run(Thread.java:568)
    </MSG_TEXT>
    </PAYLOAD>
    </MESSAGE>
    Please share your idea/comments.
    I appreciate your help.
    Regards,
    Rama K

  • ITunes 9 download - invalid digital signature error with Windows 7 Ultimate

    Since I have upgraded to Windows 7 Ultimate when I try and download the latest version of iTunes 9 I get Invalid Digital Signature error message. I've tried downloading with IE8, Opera and Firefox.
    Help please!!

    Perfect, thanks.
    I see that one's got an SPI firewall:
    http://www.netgear.co.uk/pdfs/dgn2000ds18july08
    By way of experiment, try disabling the firewall and doing another iTunes download. Are you able to get a working installer this time?

  • InfoPath Digital Signature Error

    In the InfoPath browser form, when I digitally sign the form, I get the following message:
    There is a problem with this signature.
    By clicking on Show Details, it says:
    Untrusted signature - The trust chain cannot be verified
    Any ideas how to resolve this error?

    Hi Nikhil,
    According to your description, my understanding is that you got an error when you used the InfoPath form with digital signatures.
    For this issue, it seems to be about the InfoPath form template certificate, you need to create and export it, then import to SharePoint  server.
    More information, you can refer to the two links:
    http://sampathlive.wordpress.com/2010/05/04/untrusted-signature-the-trust-chain-cannot-be-verified-error-when-digitally-signing-infopath-forms/
    https://social.technet.microsoft.com/Forums/office/en-US/8257836f-0d7b-4b1d-b400-2d8e6eb8ea11/infopath-digital-signature-error-untrusted-signature-the-trust-chain-cannot-be-verified?forum=sharepointcustomizationprevious
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • How to create a digital signature error

    Hello,
    hope i do my post in the right forum (if not i'd be grateful if it could be displaced to the correct forum). I've to do create some incidents to have a look at the output of Security Audit Log (Transaction sm20).
    I want to create a digital signature error (SAL Identifier AUV) and i've no clue how i could get it done. First I thought about an invalid single sign on ticket but apart from I would have no clue about how to create such, I don't know if that's a way to make the error, mentioned above, occur.
    Maybe you could give me a hint or you have an idea how I could get that done!?
    Thanks in advance
    Tobias

    Adobe Reader Touch (Windows Store app with "modern" UI) does not support any types of signatures yet.
    Digital Signatures with certificates
    Electronic Signatures (that are legally enforceable)
    Signature annotations (hand-writing annotations which may not be secure and legally enforceable)
    Adobe Reader XI (traditional desktop app with classic UI) supports #1 and #3.
    Adobe EchoSign supports #2.
    Adobe Reader for iOS/Android supports #3.

  • Signature error

    Hi..
    I am new bie in this forum. I am creating some add-on using VB6 and available add-on by manipulating the form (in the add-on). After compile it, I want to create installer before register the add-on but I find the problem digital signature error and not succeed. how to solve this situation ? is it possible directly to create the installer by just manipulating available add-on form?
    i appreciate your answer. tks in advance.
    Rgds,
    Steve

    Hi Owen,
    Tks for your answer, I have browsed thie website:
    https://www.sdn.sap.com/irj/sdn/developerareas/businessone?rid=/webcontent/uuid/a175fb62-0c01-0010-a8b5-fa58a13b1cf7 [original link is broken]
    I just wonder why there is no VB6 explanation there, meanwhile I have used VB6 in creating the add-on. Does it influence in using B1DE ?
    I use SBO 2004A, SP01. So the add-on will be registered to it.
    Rgds,

  • Damaged Installable - "invalid signature error"

    Hi,
    When I export a Release build for a Flex AIR Application, I am specifying a digital signature (that I created via the Flex Builder Export Release bild wizard).
    But when I try to install the .ait file, it gives me the following error:
    Code:
    The application could not be installed because the AIR file is damaged. Try obtaining a new AIR file from the application author.
    The install log says - "invalid signature error".
    Appreciate any inputs.
    Thanks
    Bhaskar

    I am pasting the install log
    Code:
    Starting app install of file:///C:/Documents%20and%20Settings/Bhaskar/Desktop/FlexApp.air
    UI SWF load is complete
    UI initialized
    Unpackaging to C:\Documents and Settings\Bhaskar\Local Settings\Temp\flaA1.tmp
    b failed while unpackaging: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="invalid package signature" errorID=5022]
    starting cleanup of temporary files
    application installer exiting
    I badly need to resolve this issue.

  • Please help me itunes 8 wont load w/ invalid signature error

    There has to be some sort of cosmic joker who is laughing at all of us. Perhaps the folks at Verisign are playing games with us or maybe it's Microsoft. How can there be a requirement to upgrade to itunes 8 when you purchase a new Nano and then not be able to do it because of an invalid signature error. I'm not the only one who has had this problem as I see it all over the web. I have tried it on another system sitting right next to this one (Win vista x32bit) and it didn't work either. I have deleted everything and updated win installer ver 4.5 and nothing works. The application wont run because of the signature error. I'm sure that the powers that be know what the problem is but dont want to release the fix because one side or the other hasn't been paid the appropriate money. It's always about the money. I have read every thread and suggestion that I could find but cant get it to work. If anyone has the answer please help me. I'm not a technotard and this is frustrating

    I am afraid AFIK a clear cut solution for this hasn't emerged.
    Are you trying to update with Apple Software Update. You might try repairing it from add/remove programs and trying again after a restart.
    Have you tried downloading the iTunes installer from here:
    http://www.apple.com/itunes/download/
    Save the file on your desktop and run it from there.
    I would clear your temporary Internet files and restart your PC before doing this.
    If that doesn't work, maybe running the installer from your browser would work, although saving the file is usually best.
    I have one report that a problem with a router causes this problem and that replacing the router fixed it, but in this case all downloads were affected.
    It would be interesting to see if you can install the standalone Quicktime as a test. You can download it from here:
    http://www.apple.com/quicktime/download/win.html
    You want the version without iTunes, which is not the default.

  • Signature error when user tried to add new database via configuration.

    We just moved domain. No changes to database, operating system. As admin I can get in fine with the new domain, but not the user. He tried to create a new database in the configuration dialogue box and got debug error. When you click on next he get a signature error. Any ideas?

    I used the information to narrow down what was wrong. You were right about the user. The old user was not working, but after I created a new user that I (admin) was able to logon and see the database, the user still unable to add a new database connection. I went back to the old dbxconnections file and just made edit to the file and put it back into operation and the user was able to see their data again.

  • Hello, I was trying to upgrade my iTunes for windows 7 PC, but because of invalid signature error I removed iTunes as well as all apple related applications. While reinstalling it , When I click link to install iTunes it immediately says '' thank you

    Hello, I was trying to upgrade my iTunes for windows 7 PC, but because of invalid signature error I removed iTunes as well as all apple related applications. While reinstalling it , When I click link to install iTunes it immediately says '' thank you for downloading iTunes'' but I don't find it in my system.
    I have tried all suggested option to solve it but all in vain. Please help me to get rid of this problem

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • [SOLVED]linux-headers upgrade fails with PGP signature error

    Whe trying to upgrade the linux kernel using:
    pacman -S linux linux-headers
    it fails with the following error:
    (2/2) checking package integrity                             [#################################] 100%
    error: linux: signature from "Tobias Powalowski <[email protected]>" is unknown trust
    error: linux-headers: signature from "Tobias Powalowski <[email protected]>" is invalid
    error: failed to commit transaction (invalid or corrupted package (PGP signature))
    Errors occurred, no packages were upgraded.
    I have tried deleting /etc/pacman.d/gnupg and the recreating it with
    pacman-key --init
    , I have also run
    pacman -Syy
    to make sure the repository is up to date.  I read the wiki post about time, but my ntp daemon is running, and I have confirmed that my time is exactly right.
    Last edited by MikeDacre (2013-04-01 23:32:27)

    Hi,
    Sorry, but that doesn't help me.  I can't find any reference in that post to this problem.  I get a similar issue when I try to upgrade mysql:
    >> sudo pacman -S mariadb libmariadbclient mariadb-clients 16:06 Mon 04-01-2013
    resolving dependencies...
    looking for inter-conflicts...
    :: libmariadbclient and libmysqlclient are in conflict. Remove libmysqlclient? [y/N] y
    :: mariadb-clients and mysql-clients are in conflict. Remove mysql-clients? [y/N] y
    :: mariadb and mysql are in conflict. Remove mysql? [y/N] y
    Targets (6): libmysqlclient-5.5.30-6 [removal] mysql-5.5.30-6 [removal]
    mysql-clients-5.5.30-6 [removal] libmariadbclient-5.5.30-2 mariadb-5.5.30-2
    mariadb-clients-5.5.30-2
    Total Download Size: 16.85 MiB
    Total Installed Size: 152.41 MiB
    Net Upgrade Size: 28.51 MiB
    Proceed with installation? [Y/n] y
    :: Retrieving packages from extra...
    libmariadbclient-5.5.30-2-x86_64 6.6 MiB 1479K/s 00:05 [#################################] 100%
    mariadb-clients-5.5.30-2-x86_64 871.8 KiB 421K/s 00:02 [#################################] 100%
    mariadb-5.5.30-2-x86_64 9.4 MiB 440K/s 00:22 [#################################] 100%
    (3/3) checking package integrity [#################################] 100%
    error: libmariadbclient: key "BBE43771487328A9" is unknown
    :: Import PGP key , "Bartlomiej Piotrowski <[email protected]>", created 2011-10-10? [Y/n] y
    error: key "Bartlomiej Piotrowski <[email protected]>" could not be imported
    error: mariadb-clients: key "BBE43771487328A9" is unknown
    :: Import PGP key 487328A9, "Bartlomiej Piotrowski <[email protected]>", created 2011-10-10? [Y/n] y
    (3/3) checking package integrity [#################################] 100%
    error: libmariadbclient: signature from "Bartlomiej Piotrowski <[email protected]>" is unknown trust
    error: mariadb-clients: signature from "Bartlomiej Piotrowski <[email protected]>" is unknown trust
    error: mariadb: signature from "Bartlomiej Piotrowski <[email protected]>" is unknown trust
    error: failed to commit transaction (invalid or corrupted package (PGP signature))
    Errors occurred, no packages were upgraded.

  • Trying to update to itunes 11.1 getting invalid signature error message

    getting invalid signature error message when trying to upgrade itunes 11.1...help me please?

    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Try this - Disable your firewall and anitvirus software temporarily.  Then download and install the iOS update.
     Cheers, Tom

  • Problem updating itunes, keep getting invalid signature error message!!

    Trying to update my itunes to latest version, keep getting "itunes has invalid signature" error message, any ideas of how to remedy this?
    Many thanks in advance.
    Meerkat68

    I've had this problem for awhile in Windows XP SP3. Last night, the simplest thing occurred to me...here's what I did (and I'm telling because it worked).
    1. Clicked on Start
    2. Clicked on Control Panel
    3. Chose Add/Remove Programs
    4. Found Apple Software Updater and clicked Remove, then responded Yes
    5. Went to apple.com and clicked on Support, and then Downloads
    6. Downloaded the latest version of Safari ONLY
    7. Installed Safari (knowing it would install the latest version of Apple Software Update)
    8. AFTER the installation was complete, I clicked again on Start, then All Programs
    9. then, clicked on Apple Software Update

  • Invalid signature error trying to download iTunes10.5

    I've tried downloading iTunes 10.5 several times and keep getting invalid signature error, any thoughts?

    I had the same thing, and it also happoened with the last update too.
    Try it again, and as soon as the download begins, close your iTunes.
    I had to do this today and I then had a successful download and update.

  • Signature error in Module msvcr80.dll

    Using PSE 7 under Windows Xp Service Pack 3.
    I was using the Editor and then decided to try the Demo of Elemenst+. On reopening the Editor I got a Signature error in Module msvcr80.dll version 8.0.50727.4053.
    As I also have PSE 5 on my system, which is still working correctly, I looked for its msvcr80.dll; found it with a version of 8.0.50727.42. 
    Replaced the 8.0.50727.762 in: 
    C:\Program Files\Adobe\Photoshop Elements 7.0\Microsoft.VC80.CRT 
    with Version 8.0.50727.42 
    On Opening the Editor the same Signature error. 
    Note still reporting 8.0.50727.4053 Not 8.0.50727.42 So reports 8.0.50727.4053 whether .42 or 762 installed - providing Editor is reading C:\Program Files\Adobe\Photoshop Elements 7.0\Microsoft.VC80.CRT for its msvcr80.dll. (I have searched for msvcr80.dll and only found the above path for PSE 7.0 but there is another, 4053, in C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1f......7989 and also 762 and 3053 in C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_....... ) 
    I did see a suggestion of using the msvcr80.dll from the Installation Disk but this is just a giant cab file; msvcr80.dll not listed seperately. 
    I have used System restore to go back before adding Elements+ but no luck! 
    Before I reinstall or even reformat can anyone please help?

    I have now managed to extract msvcr80.dll from my PSE 7 installation disk via WinZIP.
    It has Version 8.0.50727.762 I have placed it in C:\Program Files\Adobe\Photoshop Elements 7.0\Microsoft.VC80.CRT to no avail. Note the manifest file in C:\Program Files\Adobe\Photoshop Elements 7.0\Microsoft.VC80.CRT is looking for version 8.0.50727.762
    I note that the error report I could send to Microsoft still has mention of Elements+ even though I have restored my setup to before it was installed?

  • Bad Signature Error When Signing With GPG

    I'm trying to sign a public PGP key but am encountering a 'Bad signature' error:
    gpg --edit-key [email protected]
    gpg> sign
    You need a passphrase to unlock the secret key for
    user: "My User <[email protected]>"
    2048-bit RSA key, ID 12345678, created 2012-01-01
    I enter my passphrase then get:
    gpg: checking created signature failed: Bad signature
    gpg: signing failed: Bad signature
    gpg: signing failed: Bad signature
    I've done some searching online but can only find old, unrelated posts or ones relating to smart cards, which I'm not using.
    The wording of the error seems to suggest that gpg is attempting to verify the signature it just created but is failing?
    I have gnupg 2.0.25-1 installed and am running the above commands via a PuTTY ssh connection.
    Any help gratefully received!

    I upgraded my Adobe to version 8 and tried the task with the same file.
    It worked without any error.

Maybe you are looking for

  • Folder/Public Folder - What is the maximum file size before the URL created no longer works

    Hi, I have received links to files in beehive folder, where the URL will not load as the file name is to long and it's reach some type of maximum display limit for the URL. Is there a maximum document file name length before the URL hit some type of

  • I want to create a Roll Over on part of an image.

    Good day.  I would like to create a HTML page like this:   Cherry Hill Mall | Directory  for a Mall.  My plan is to create a image and then trace the specific store like a hotspot and then link a roll over to it.  But I'm not sure if its possible.  I

  • How do I do back to previous system folder after archive and install?

    Did an archive and install (retaining my existing user account), only to discover it was unnecessary. (Turns out the problem was hardware-related.) How do I go back to using my previous system folder?

  • Headphone jack problem with Creative Zen Nomad XTra 3

    My warranty expired a couple of months ago, so, naturally, all problems are showing up now. Last night I noticed that my player is no longer deli'vering sound out of the right headphone. I've tried with several different headphones and a pair of exte

  • Users - I seem to be two people!?

    Hi there - This could get addictive ... boy are you guys gonna regret the day I found this board! Here is stupid, rookie question(s) #2: Part 1: Accounts When I got my G5 Quad just over a year ago I didn't really understand the "Users" facility becau