Signature does not match. The request signature we calculated does not match the signature you provided.
re: ipad printing from safari
I have routinely transferred pdf files to Safari and printed them from there. I now get the following message: “Signature does not match. The request signature we calculated does not match the signature you provided.” The only change that I have made since the last thing I printed is to install the ios update.
Hello,
There is a possibility that you have activate line item display for some of the accounts at a later stage. Meaning that earlier postings were not be shown for the earlier postings but only totals will be made available. Therefore, obviously there is bound to be difference between line item report and totals report.
You need to identify which accounts are being changed with line item display at a later stage.
In case if you forget to keep GL Line item display for an account, but the posting are already made the following steps you would required to get the line item display retrospectively.
1. Note that you are NOT required to make the balance of that GL account to ZERO. Please do not confuse with Open Item Management.
2. Put the check box line item display for the account in FS00. Make sure you are entering right company code.
3. Block the account for posting in COA Segment and Company Code Segment in FS00
4. Go to SA38 and run program RFSEPA01 (Give correct GL Account and Company Code)
5. Now, remove the block you kept on the GL Account in FS00.
This will reset the line item display retrospectively.
Hope this will solve your problem.
Regards,
Ravi
Similar Messages
-
I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."
Oh, dear.
If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos. -
The requested feature DSC-Service is not found on the target machine.
Hi,
I'm trying to create a DSC Pull Server with a 2008 R2 SP1 Virtual Machine,
While many of the forums and tutorials have helped, particularly https ://www .google.com/url?url=https://davewyatt.wordpress.com/2014/06/07/how-to-install-a-dsc-pull-server-on-windows-2008-r2/&rct=j&frm=1&q=&esrc=s&sa=U&ei=7BavVKvxMIHEmAWDjoLwBQ&ved=0CBQQFjAA&usg=AFQjCNEUHC8QBHfNgChYXnMQe87rXrHz1g
after installing all of these modules and moving on to later tutorials I'm experiencing an error every time I try to run a pull server configuration scrpit.
After running the script found here: http://www .systemcentercentral.com/day-1-intro-to-powershell-dsc-and-configuring-your-first-pull-server
I then trid to execute that code on the localhost,
it came up with this error:
PowerShell provider MSFT_RoleResource failed to execute Test-TargetResource functionality with error
message: The requested feature DSC-Service is not found on the target machine.
+ CategoryInfo : InvalidOperation: (:) [], CimException
+ FullyQualifiedErrorId : ProviderOperationExecutionFailure
+ PSComputerName : localhost
Please Help, I cannot find the DSC-Service Module, and while some scripts have allowed and Pull Server to be created, they do not function peroperly because of this error.
Thanks a lot.
P.S. due to this being a 2008 R2 SP1 machine When then running the command: Add-WindowsFeature DSC-Server (As has been suggested by a lot of soureces) This error Will Come up:
Add-WindowsFeature : ArgumentNotValid: Invalid role, role service, or feature: 'DSC-Service'. The name was
not found.
At line:1 char:1
+ Add-WindowsFeature
+ ~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (:) [Add-WindowsFeature], Exception
+ FullyQualifiedErrorId : NameDoesNotExist,Microsoft.Windows.ServerManager.Commands.AddWindowsFeatureComm
andHi Anna,
I'm in the same situation as Nathys.
I tried everything you indicated. However, it still does not work. I got the same error:
PowerShell provider MSFT_RoleResource failed to execute Test-TargetResource functionality with error message: The requested feature DSC-Service is not found on the
target machine.
+ CategoryInfo : InvalidOperation: (:) [], CimException
+ FullyQualifiedErrorId : ProviderOperationExecutionFailure
+ PSComputerName : devops-01
The SendConfigurationApply function did not succeed.
+ CategoryInfo : NotSpecified: (root/Microsoft/...gurationManager:String) [], CimException
+ FullyQualifiedErrorId : MI RESULT 1
+ PSComputerName : devops-01
PS C:\Workspace\dsc> dism /online /Enable-Feature /FeatureName:DSC-Service
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7600.16385
Enabling feature(s)
[==========================100.0%==========================]
The operation completed successfully.
I have restarted the computer, but it still does not work. -
We could not complete your request.
There was an error in the App Store. Please try again later. (13)I am having a similar problem. I get one of two errors: "We could not complete your request. There was an error in the App Store. Please try again later. (null)" OR "We could not complete your purchase INSTALL_ERROR_DISTRIBUTION_SIGNED_BY_APPLE".
I am having this trouble on a brand new MacBook Pro running OS X 10.7.1. My firewall is off and no virus software is installed.
I can download and update apps on a different computer using OS X 10.6.8 just fine.
Any other recommendations? -
I Want To Download Paid Apps It Says (We could not complete your request. There was an error in the App Store. Please try again later. (100)
What Should I Do Tell Me Please I Went To Youtube To Find Any Tutorial And Its All Just CRAP So Please Give Me A Solution
Today Sunday 14 2013 I But To 10 doller Gift Cards And I wanted To Download Grand Theft Auto:San Andreas And It Said First Click OK to confirm that you are 17 or over. Your content will then begin downloading immediately. i Clicked Ok Then It Said
(We could not complete your request. There was an error in the App Store. Please try again later. (100)
Then It Said For assistance, contact iTunes Support at www.apple.com/support/itunes/ww/
And I went To The Link and it Said Nothing About Error 100 Soo I Dont Now What To Do One Of The Tutorials Said That You Have To Agree To The Terms And Conditions Soo I Found The Terms And Conditions At Itunes The App That Comes Allready Installend On Your MacBook Pro At The Bottom Left And When I Clicked On It It Got Me To A Link To Your Website And The Terms And Conditions You Cant Agree Just Read Them ONLY You Cant Agree Soo Apple
PLEASE TELL MEError
what is error code 1009? -
i need help, i can't download free applications in App store. they answer me "your request cannot be processed Error code:1009".
and after they said "we could not complete your request. There was an error in the App Store. Please try again later (null)".
COMPUTER DETAILS: MacBook Pro 13-inch, Mid 2012 OS X Version 10.9.5; Processor 2,5GHz Intel Core i5; Memory 4 Go 1600 MHz DDR3.
Thanks beforehand!!!Error
what is error code 1009? -
I can't do online banking. When I try to open the page I get error "The requested URL /Summary.cgi was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.Hi,
These blog posts might help debug problem
Oracle APEX: Got a 404 Not Found? | Inside Oracle APEX by Patrick Wolf
daust_de :: Oracle XE / APEX: Troubleshooting the 404-not found error on XE
Regards,
Jari -
The requested URL /discoverer/viewer was not found on this server
hi
In e-business suite 12.1.1 , In projects super user responsibility when I want to open JSP forms like :
Team Role Details Workbook and Overcommitted Resource Hours Workbook and Scheduled Resource Hours Workbook This error take place :
Not Found
The requested URL /discoverer/viewer was not found on this server.
i think this is not related to Oracle Projects, i think it should solve by It.
can any body tell me what should i do???M.Khayatan wrote:
hi
In e-business suite 12.1.1 , In projects super user responsibility when I want to open JSP forms like :
Team Role Details Workbook and Overcommitted Resource Hours Workbook and Scheduled Resource Hours Workbook This error take place :
Not Found
The requested URL /discoverer/viewer was not found on this server.
i think this is not related to Oracle Projects, i think it should solve by It.
can any body tell me what should i do???Do you get this error with this specific page only?
Please see these docs.
11i: "NOT FOUND The requested URL /discoverer/viewer was not found on this server" Error When Attempting To Open Workbook From Apps Menu [ID 1327364.1]
How to Create a Link to a Discoverer Workbook in Apps R12 [ID 471303.1]
Using Discoverer 11.1.1 with Oracle E-Business Suite Release 12 [ID 1074326.1]
Using Discoverer 10.1.2 with Oracle E-Business Suite Release 12 [ID 373634.1]
Thanks,
Hussein -
The requested URL /apex/listenerConfigure was not found on this server
please help me..
after run in command prompt (java -jar c:\apex.war) to install apex listener,
i have error when i call link http://localhost:8080/apex/listenerConfigure.
In browser show :
Not found
The requested URL /apex/listenerConfigure was not found on this server
how i can fix this error?
thx :) :) :)Hi Beny,
let's see what I can do to help you fix your installation.
java -Dapex.port=1521 -jar c:\apex\apex_listener\apex.warThat way you would try to start the APEX Listener on a port that is usually used by the database listener. This could work if you don't have a database installed on that machine or you configured the database listener to use a different port, but I wouldn't recommend to use that port anyway, as anybody will associate it with at database listener... In your case, it sounds like you have a database installed on the same machine you start your APEX Listener on and the database is using that port already. That's why you get "nothing" when you try to access the APEX Listener - the APAEX Listener can't bind to a port that's already used by another process.
java -Dapex.port=8081 -jar c:\apex\apex_listener\apex.war That port sounds better. The fact that you get an internal error indicates that the APEX Listener is actually working on that port, so we could try to debug.
My first guess is, that you've already configured the APEX Listener before. Since you had it running before, I assume you didn't remove the old configuration, so the APEX Listener will reuse it. You'll find the corresponding information in the console output of your APEX Listener.
If that's the case, the error will most likely not be in the previously working APEX Listener configuration, but in your APEX installation. Did you perform the installation steps concerning the APEX_PUBLIC_USER documented for the installation of APEX using APEX Listener? See the corresponding section of the [url http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/otn_install.htm#BABDEEIH]APEX Installation Guide for details.
-Udo -
"The requested URL /apex/f was not found on this server" error
Hi there
I'm getting the following error message when trying to access our apex app:
http://theHost:8080/apex
The requested URL /apex/f was not found on this server
It just happened out the blue so i've no idea what happened. Can someone help me to find a solution asap?
Many thanks, JonHow did you fix this, please? I'm getting the same error, and none of the solutions on this forum apply.
Edited by: Jean-Marc, UK on Mar 16, 2010 2:34 PM -
Hi All,
We are using FTP Connection in our SSIS Package which will take a flat file from the sharepath to another FTP Path.
We used SqlServerTableConfiguration to store all the connection. Initally we have stored only the below connection int he
SqlConfiguration table. ie only the server name
Note : We are not using XML Configuration.
ConfigurationFilter
ConfiguredValue
PackagePath
Filter_ftp
pqrft- pcmnt.uk.acenentcapmc.com:21
\Package.Connections[FTP Connection Manager].Properties[ConnectionString]
while running the job we have found that we have not stored the UserName and password so we have added the below entries in the Sql Configuration table
In the Configurationtable we have the following entires
ConfigurationFilter
ConfiguredValue
PackagePath
Filter_ftp
pgrotmlceni
\Package.Connections[FTP Connection Manager].Properties[ServerUserName]
Filter_ftp
21
\Package.Connections[FTP Connection Manager].Properties[ServerPort]
Filter_ftp
abcdXYZ
\Package.Connections[FTP Connection Manager].Properties[ServerPassword]
Filter_ftp
pqrft-pcmnt.uk.acenentcapmc.com
\Package.Connections[FTP Connection Manager].Properties[ServerName]
Filter_ftp
pqrft-pcmnt.uk.acenentcapmc.com:21
\Package.Connections[FTP Connection Manager].Properties[ConnectionString]
In the package properties we have selected "DontSaveSentivity" Option.
We are getting the below error message when we run the package through jobs after deployment and also we are getting the same error message even when we run the package from Bids
Message
Executed as user:abc_xyz-proxy. Microsoft (R) SQL Server Execute Package Utility Version 10.50.4000.0 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 06:53:16 Error: 2013-12-16 06:53:20.69
Code: 0xC001602A Source: SSIS_ABC_GT_GRoots_Export Connection manager "FTP Connection Manager" Description: An error occurred in the requested FTP operation. Detailed error description: The password
was not allowed . End Error Error: 2013-12-16 06:53:20.71 Code: 0xC002918F Source: FTP Task FTP Task Description: Unable to connect to FTP server using "FTP Connection
Manager". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 06:53:16 Finished: 06:53:20 Elapsed: 3.822 seconds. The package execution failed. The step failed.
ilikemicrosoftHi Surendiran,
The issue should occur because the syntax of the ConnetionString property of the FTP Connection Manager is incorrect. In fact, the ConnectionString property is unnecessary. I suggest that you only use the four properties instead: ServerName, ServerPort,
ServerUserName, and ServerPassword.
Reference:
http://stackoverflow.com/questions/3888170/ftp-connection-string-using-expression-in-ssis
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support -
Can't log into yahoo email. I get the following message: "Not Found The requested URL /mc/showMessage was not found on this server.
OK here is the problem I am having with this.. It might be related to my own machine but I need help where to look..
on the command line using mintty on XP I have this:
$ nslookup us.mg6.mail.yahoo.com
Non-authoritative answer:
Server: Wireless_Broadband_Router.home
Address: 192.168.1.1
Name: any-ycpi-uno.aycpi.b.yahoodns.net
Addresses: 98.136.145.155, 216.115.101.178, 216.115.110.119, 216.115.101.179
98.136.145.157, 98.136.145.154, 216.115.110.118, 98.136.145.156
Aliases: us.mg6.mail.yahoo.com, geoycpi-uno-deluxe.gycpi.b.yahoodns.net
geoycpi-uno.gycpi.b.yahoodns.net
HOwever when I look in firebug for where the ip for the above domain is this is what I get:
66.115.130.31 clearly not listed above..
Let's check the aliases
$ nslookup geoycpi-uno-deluxe.gycpi.b.yahoodns.net
Non-authoritative answer:
Server: Wireless_Broadband_Router.home
Address: 192.168.1.1
Name: any-ycpi-uno.aycpi.b.yahoodns.net
Addresses: 216.115.110.118, 98.136.145.156, 98.136.145.155, 216.115.101.178
216.115.110.119, 216.115.101.179, 98.136.145.157, 98.136.145.154
Aliases: geoycpi-uno-deluxe.gycpi.b.yahoodns.net
geoycpi-uno.gycpi.b.yahoodns.net
nope
$ nslookup geoycpi-uno.gycpi.b.yahoodns.net
Non-authoritative answer:
Server: Wireless_Broadband_Router.home
Address: 192.168.1.1
Name: any-ycpi-uno.aycpi.b.yahoodns.net
Addresses: 98.136.145.156, 98.136.145.155, 216.115.110.118, 216.115.101.179
98.136.145.157, 216.115.101.178, 98.136.145.154
Aliases: geoycpi-uno.gycpi.b.yahoodns.net
nope
where is this 66.115.130.31 ip comming from.. why isn't firefox using native DNS lookup?
When I do a reserve lookup on that ip it points to nationalnet.com as the top SOA..
any ideas? -
Has anyone a solution to two update having the following popup-"We could not complete your request". There was an error in the App store. Please try again later. I've tried over 4 days without any change.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
"could not complete the requested operation" when i try to open the program
"could not complete the requested operation" when i try to open the program
what can i do
illustrator ccaccupub,
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
My e-mails worked last night but this morning it did not. My aol emails work just fine only the att mails do not open up.
Keep on getting this error: The requested URL /dc/launch was not found on this server.If you have Panda Cloud Antivirus installed, please see this thread: https://support.mozilla.com/en-US/questions/798059
Otherwise, follow co-rel's instructions in this one: https://support.mozilla.com/en-US/questions/784695 -
when using firefox on yahoo and opening my mail it says Not Found The requested URL /dc/launch was not found on this server. How can this be fixed?
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Maybe you are looking for
-
How do you combine two or more movie clips into one movie clip in iMovie '09
how do you combine two or more movie clips into one movie clip in iMovie '09
-
Mail search not working + Spotlight keeps indexing
I have an old problem that has resurfaced after creating a new user on my Mac. Mail search brings no results and Spotlight is constantly indexing - day in, day out. It never seems to get there. I tried turning my hard drive to private in Spotlight se
-
Can't delete files backed up in Time Machine
I use Time Machine to back up my MacBook Pro to NAS on my home wifi. I have a large file in my downloads folder that I have moved elsewhere and I don't need backed up. When I enter Time Machine's 'Star Wars' window and select the file and choose to d
-
Connecting my iPhone to my printer
It keep saying no printer found and when I try to add my printer it doesn't show my printer but others. Can I use D100?
-
Error when trying to export to wmv
i keep getting an error when i try to export my movie to wmv. is anyone else having that problem?