Signature Feilds not taking info (In custom signature)

When creating a custom signature
- there are feilds that will not let you enter info-
then you may not submit your signature- because feilds are missing.
1. Is Nickname
2. Email address
I was under Business signature
Thank you

My "problem" seems to have solved itself. Very strange. What I did at my first attempt was to clone several custom signatures from a single custom rule in the IDSM. First rule worked in MARS but not the the others, only difference was that the later rules were created as subsignatures and imported into MARS as such. When that didn't work I tried to created the IDS rules as separate rules instead of subsignatures and reimport them into MARS, no luck there either.
I removed my custom signatures from the IDSM and left everything for the weekend. When I returned this Monday and reentered the signatures into the IDSM and tried them out MARS managed to parse them correctly, even put them into the correct event group.
I've no idea what I've done differently but it's all working fine now
/Fredrik

Similar Messages

  • Signature does not match. The request signature we calculated does not match the signature you provided.

    re: ipad printing from safari
    I have routinely transferred pdf files to Safari and printed them from there. I now get the following message: “Signature does not match. The request signature we calculated does not match the signature you provided.”  The only change that I have made since the last thing I printed is to install the ios update.

    Hello,
    There is a possibility that you have activate line item display for some of the accounts at a later stage. Meaning that earlier postings were not be shown for the earlier postings but only totals will be made available. Therefore, obviously there is bound to be difference between line item report and totals report.
    You need to identify which accounts are being changed with line item display at a later stage.
    In case if you forget to keep GL Line item display for an account, but the posting are already made the following steps you would required to get the line item display retrospectively.
    1. Note that you are NOT required to make the balance of that GL account to ZERO. Please do not confuse with Open Item Management.
    2. Put the check box line item display for the account in FS00. Make sure you are entering right company code.
    3. Block the account for posting in COA Segment and Company Code Segment in FS00
    4. Go to SA38 and run program RFSEPA01 (Give correct GL Account and Company Code)
    5. Now, remove the block you kept on the GL Account in FS00.
    This will reset the line item display retrospectively.
    Hope this will solve your problem.
    Regards,
    Ravi

  • Multiprovider not taking info from master data table?

    Hi all,
    i've a problem with a multiprovider and some navigational attributes of zmaterial.
    There are several infocubes in the multiprovider and they all have zmaterial, the problem is that the data from one of these cubes is taking the values of some navigational attribute from the cube itself, not from the master data table of zmaterial even if i changed the assignment from the multiprovider.
    Is there any option i must check/look to get this thing work?
    If you need any other info just let me know.
    Thank you.

    Hi,
    It seems the identificaiton are still  incorrect.
    Just try to put the identification for those characteristics from the navigational attribute option in the multiprovider and not from the infoobject present in the cube.
    So for ZMaterial_A it should be identified with ZMaterial_A in the multicube from the respective cubes.
    Thanks
    Ajeet

  • Using IPS 6.3 customized signatures in CS MARS

    A client has a Cisco IPS 6.3 module installed in a Catalyst 6500, *with fully customized signatures* which generate thousands of alerts clearly visible in its IPS Event Viewer.
    MARS is pulling info from that IPS, but the customized signatures do not appear in any Incident. Is it possible for MARS to pull all those customized signatures??
    Thanks in advance

    The first step is to get MARS to parse the event. The next step is to create the necessary inspection rules.
    You can start here:
    http://ciscomars.blogspot.com/2008/03/custom-ips-signatures-with-cisco-mars.html

  • Custom signature

    I have scanned my handwritten signature for use with emails. I have been able to add this to my Outlook emails in the my office on a PC but have not been able to figure out how to create a custom signature for my iphone & ipad.
    Rob

    step 1: send your handwritten signature from your PC to your iphone and ipad.
    step 2: on your iphone and ipad, hold the picture and select copy
    step 3: Go to Settings > Mail, contacts and Calendars > Signature and paste the picture
    Done

  • Adding custom signature to Mail

    I know this has GOT to be easy, but I am totally stumped. I have several email accounts, and have signatures setup for each in preferences for each. My problem is that I just cannot figure out how to have my signature use any other font beside the default font. It is driving my nuts. I've even tried creating it how I want in Pages, and copying/dragging it into the signature, and it keeps changing the font to the default helvetica.
    Any ideas?

    In the Signature preferences be sure you have not checked the box to "Match the font ...." Also, be sure you have configured Mail to use Rich Tesxt rather than plain text. This is done in Mail's Composing preferences.
    If you still have problems here are two possible solutions. One is to create your custom signature in an HTML editor. A simple editor that would work is Level4 - VersionTracker or MacUpdate. Then paste the resulting HTML code for your signature into the Signature preferences in Mail. The other would be to create your signature in Pages, for example, and output a PDF file. You can then insert the PDF file as your signature.

  • Custom signature for TOR Application

    Hi,
    I want to create custom signature to produce alert whenever any machine lunches TOR application, i have searched and found that there already two signatures cretaed 5816/0 5816/1, i have enabled them and tested it did not fire.
    I have ips in promoscous mode monitoring all vlans, working normally. I dont have ssl interception @ any device, so once TOR is establish then i dont have visibilty over the traffic.
    i need help in creating usch signature, i have took wireshark capture of traffic and all i can see on application layer is proxy connect and proxy port (see attached)
    thanks for your help.                

    Hi nkumarsr,
    I have cretaed tcp string signature for ports 9001, 9090
    and also i have added it in builtin signature 5816/0 and 5816/1
    i have luanch TOR and it is not fired, i took capture on client PC and seached for tcp.port == 9001 and 9090, it is not showing.
    do u have any other ideas ?

  • Adobe XI when i use signature option i try to use rectangle, it gives option of certificate signature, does not give me webcam or digital signature or any other option to sign

    when i use signature option i try to use rectangle, it gives option of certificate signature, does not give me webcam or digital signature or any other option to sign, have downgraded to Adobe X, no options show. Have upgraded back to XI no change. Free software I am using currently.

    There are two types of signatures in PDF: electronic signatures, which are just images (stamps, text, image) and digital signatures.
    If you want to use electronic signatures in Acrobat XI go to Fill&Sign->Place Signature. If a drag rectangle for the digital signature dialog comes up, you have selected digital signatures and Acrobat/Reader remembered it. Cancel it, go back to Fill&Sign->Place Signature and click a triangle to the left of "Place Signature". Then click on "Changed Saved Signature" and select the electronic signature type you want to use.
    If you want to use digital signatures you can create custom digital signature appearance. Go to Edit->Preferences->Signatures->Creation&Appearance->More. In the "Appearances" section click "New". You will be presented with the dialog that allows you to create a custom appearance. If you want to put there your picture or image of your ink signature, you need to prepare this image as a file beforehand, select "Image" radio button, browse to the location of your image file. In Reader you can use only PDF as your image file. In Acrobat you can use many more file formats: JPEG, PNG, etc.

  • Custom signature in CSM3.0 for IDSM2 with IPS5.1

    I am trying to add a custom signature in CSM3.0 for IDSM2 which is running IPS5.1 in cat6500.I am using custom
    wizard to create the custom signature ( say "sweep" ).Under sigature, IPS5.x, I could see the created custom signature but when the sigature triggers, IPS event viewer shows only the old ( built in - sweep )signature ID and not the customized one.
    Just to test the changes in effect,
    I tried to change the event level say "low" to "high" for one of the built in signature( sweep 2100) by editing the same.Display shows the changed level, but when the sigature triggers the IPS event viewer shows the level as "low" instead of "high".
    Also I tried with enabling the check box for the option " retire".
    How do I create and test the customized signature..I tried with both IDM and CSM3.0.Any suggestions...

    The custom headers and client IP and port headers are inserted in every HTTP request packet. Full session headers and decoded client certificate fields are inserted in the first HTTP request packets; only the session ID is inserted in subsequent HTTP requests that use the same session ID. The servers are expected to cache the session or client certificate headers based on the session ID and use the session ID in subsequent requests to get the session and client certificate headers.

  • One or more PGP signatures could not be verified!

    Trying to install anything with pacaur or using makepkg gives out this error:
    ==> Making package: cower 12-2 (Wed Jan 7 07:11:25 WET 2015)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving sources...
    -> Downloading cower-12.tar.gz...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
    100 22636 100 22636 0 0 60301 0 --:--:-- --:--:-- --:--:-- 60362
    -> Downloading cower-12.tar.gz.sig...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
    0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
    100 287 100 287 0 0 1136 0 --:--:-- --:--:-- --:--:-- 1134
    ==> Validating source files with md5sums...
    cower-12.tar.gz ... Passed
    cower-12.tar.gz.sig ... Skipped
    ==> Verifying source file signatures with gpg...
    cower-12.tar.gz ... FAILED (unknown public key 1EB2638FF56C0C53)
    ==> ERROR: One or more PGP signatures could not be verified!
    Can someone help?

    clfarron4 wrote:
    Potomac wrote:
    jasonwryan wrote:Like everything else, this can be automated with a couple of lines in your ~/.gnupg/gpg.conf file, as described in the wiki.
    I don't find this part in the wiki, can you tell me exactly where have you read this ?
    https://wiki.archlinux.org/index.php/Gnupg
    I saw automatic importing of missing keys in this BBS thread. Don't know if it is in the ArchWiki though.
    Just found it here: https://wiki.archlinux.org/index.php/Ma … e_checking
    It is a personal preference, I don't want to import Arch/AUR keys into my normal personal keyring - but reading the gpg (and makepkg) manpage it looks like if you set GNUPGHOME=/some/path first that should work to set a special keyring just for AUR and a custom config from the wiki.

  • PGP signatures could not be verified

    I'm still somewhat new on using makepkg.  I previously customized the bind pkg for samba by copying the /var/abs/extra/bind directory into my /var/abs/local and adding a couple of build options. Worked like a charm and no issues.
    Today bind 9.10.2 was released and I wanted to update my package but I get:
    ERROR: One or more PGP signatures could not be verified! when updating using the latest abs bind package.
    ==> Making package: bind 9.10.2-1 (Wed Mar 4 16:47:20 PST 2015)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving sources...
    -> Downloading bind-9.10.2.tar.gz...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    100 8282k 100 8282k 0 0 5669k 0 0:00:01 0:00:01 --:--:-- 5672k
    -> Downloading bind-9.10.2.tar.gz.asc...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    100 490 100 490 0 0 6640 0 --:--:-- --:--:-- --:--:-- 6712
    -> Found tmpfiles.conf
    -> Found sysusers.conf
    -> Found named.conf
    -> Found named.service
    -> Found localhost.zone
    -> Found localhost.ip6.zone
    -> Found 127.0.0.zone
    -> Found empty.zone
    ==> Validating source files with sha1sums...
    bind-9.10.2.tar.gz ... Passed
    bind-9.10.2.tar.gz.asc ... Skipped
    tmpfiles.conf ... Passed
    sysusers.conf ... Passed
    named.conf ... Passed
    named.service ... Passed
    localhost.zone ... Passed
    localhost.ip6.zone ... Passed
    127.0.0.zone ... Passed
    empty.zone ... Passed
    ==> Verifying source file signatures with gpg...
    bind-9.10.2.tar.gz ... FAILED
    ==> ERROR: One or more PGP signatures could not be verified!
    this is the abs bind package....why is it failing?

    Same error here.
    ==> Validando arquivos fonte com sha256sums...
    firefox-36.0.1.source.tar.bz2 ... Passou
    firefox-36.0.1.source.tar.bz2.asc ... Ignorada
    mozconfig ... Passou
    firefox.desktop ... Passou
    firefox-install-dir.patch ... Passou
    vendor.js ... Passou
    rhbz-966424.patch ... Passou
    firefox-fixed-loading-icon.png ... Passou
    ==> Verificando assinatura de arquivo fonte com gpg...
    firefox-36.0.1.source.tar.bz2 ... FALHOU (chave pública desconhecida 057CC3EB15A0A4BC)
    ==> ERRO: Uma ou mais assinaturas PGP não puderam ser verificadas!
    I have checked (http://allanmcrae.com/2015/01/two-pgp-k … rch-linux/) but to no avail.
    I do not understand why complicate things when they are working perfectly how it worked before...

  • IDS 4215 http custom signature

    Hello,
    I am trying to build a custom signature that is matching http header or body that contains certain regular expression. Any Ideas how to do that ? I tried Web Server signature but there I can only match HTTP header.

    Try this:
    1) Login to the sensor via IDM with an admin privileged account
    2) Select “Configuration -> Sensing Engine -> Signature Wizard”
    3) Select “Start the Wizard”
    4) Select the “Web Server Signature” option
    5) Set your SigID, Sig Name, Alert and User Notes as appropriate and click “Next”
    6) Adjust the service ports (if necessary) and click “Next”
    7) Given the intentions of your signature, leave the “Web Server Buffer Overflow Checks” fields empty and click “Next”
    8) Put your regex into the “HTTP Request Regular Expression” because it will match the text within the entire HTTP request. Click “Next”
    9) Set your alerting preferences (severity, etc.) and click “Next”
    10) Adjust your alerting behaviour if you want (Click “Advanced”), or accept the defaults by clicking “Next”
    11) Click on “Create” to generate the signature
    I hope this helps,
    Alex Arndt

  • S492 : Bad Custom Signature ID ... [5577]

    Hi,
    I've implemented signature update S492, but apparently there is a problem with the new signature 5577.1 : SMB Secure NULL Login Attempt . During the upgrade process run from our CSM V3.3.1, the deployment manager returns an error :
    instance=sig0:unspecifiedError:Bad Custom Signature ID ... [5577].  Can not create a custom signature with sig-id < 60000
    When I verifie on the sensors themselves, this new signature is nowhere to be found.
    Best regards.

    Signature# 5577 is a new signature from s492 signature update:
    http://www.cisco.com/web/software/282549755/34252/IPS-sig-S492.readme.txt
    Do you happen to have a custom signature with sig# 5577 by any chance?
    If you don't, then you might want to open a TAC case as it might be a new bug.

  • Custom Signature Regex

    Does the Regex engine used by the IPS support lookahead syntax? I'm working on creating a custom signature using the TCP String engine that I want to fire if it both finds a given string, and does not find a second string. A negative lookahead seemed like the logical way to do this but when I try to use one I get a regex error from the sensor.

    ** update. sorry, just realized that this is not what you asked. I don't see anything in the docs anyway that refers to lookahead assertions **
    yes, well according to the docs anyway. I've never tested though. In my experience, Cisco sometimes just inserts verbatim snippets of text from other documentation into their guides. The MARS docs say [or used to anyway] that they support them as well and they don't. Please let us know if they work for you.
    http://cisco.com/en/US/products/hw/vpndevc/ps4077/products_command_reference_chapter09186a0080592dcb.html#wp480571
    "The following regular expression uses parentheses for recall:
    • a(.)bc(.)\1\2 matches an a followed by any character, followed by bc followed by any character, followed by the first any character again, followed by the second any character again. For example, the regular expression can match aZbcTZT. The software remembers that the first character is Z and the second character is T and then uses Z and T again later in the regular expression."

  • Custom signature- SigName

    I have created a custom signature with idsmc 2.01 and during the creation it asked for a name. I entered the name that I wanted to use for the signature but when I received an event for the signature in SecMon, the name that appeared was the default name which is equivalent to the signature engine
    SigName: STRING.TCP <defaulted>
    Can some one tell me where you update the name filed on idsmc signature configuration?

    I have rebooted the sensor as you indicated but the SigName on the custom signature that I created remain the same. (STRING.TCP)
    These are the steps that I followed to create the signature where as follows
    1. I used the management centre for ids sensors version 2.01
    2. I selected the group to which the sensor belongs
    3. I select signature/ IDS 4.x
    4. Under the selection for Select group, you have two choices built-in/custom
    5. I chose custom and then add
    6. I selected the engine string.tcp and gave the signature a name along with its selected reg-expression and other parameters.
    7. I the used the quick deploy on IDSMC to send the custom signature the group of sensors
    The signature was deployed with all of the correct values and settings but the SigName was not changed from its default.

Maybe you are looking for