Signature field and submit button not working

I recently upgraded to LiveCycle Designer ES2 and am having problems with some functionality.  I created a form with 3 signature fields and a submit button for the final signator to email the form back.  None of the signature fields work; neither does the submit button.  I did everything the same as I had in the previous version of the software.  However, it appears that there have been some changes that I'm unaware of.  I read about locking objects, but got a little confused.  Can someone tell me (in very lay terms) what I need to do to get these functions to work? 

George,
Then, I guess I don’t know what I’m looking at.   When I look at the document properties, it shows that rights have been granted.  See the screen shot below.
Would you tell me how I should enable Reader?
Gloria
Gloria Díaz
Gloria Díaz

Similar Messages

  • Cancel and Exit button not working

    Dear Experts,
    <u>Cancel and Exit button not working</u>
    I am calling a screen from inside a report program
    using SET SCREEN 9000.
    2 of the date fields(start date end date)
    on this screen are Mandatory.
    I am not able to Come out of this screen 9000 using
    CANCEL or EXIT button
    without giving a date entry in both of
    Mandatory fields (start date end date).
    Can someone help me with a solution?
    Appreciate your valuable help;
    Points assured
    Thanks,
    Aby Jacob

    Hi..
    To avoid this problem you have to use AT EXIT-COMMAND Module.
    1. In the GUI Status for both EXIT and CANCEL buttons assign the Function type E (Exit Command)
    2. In the PAI of the Screen Call this module.
       MODULE EXIT_SCREEN AT EXIT COMMAND.
    3. Now check the OK_CODE or Sy-ucomm in this module to Leave the Screen
       MODULE EXIT_SCREEN  INPUT.
           CASE OK_CODE.
          WHEN 'EXIT' .
                LEAVE TO SCREEN 0.
          WHEN 'CANCEL'.
          ENDCASE.
       ENDMODULE.
    This will surely work.
    <b>reward if Helpful.</b>

  • HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

    my ipod 4G power button and volume button not working after updated to ios6.
    i also experience wifi issue. my ipod can't detect any wifi signal.
    so deppresing!
    what should i do?
    i can't put my ipod to sleep, can't adjust volume, can't shut off.
    should i update to ios 6.1?
    HELP

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

  • Power button and home button not working and dont have warranty

    power button and home button not working and dont have warranty

    I had the same problem went to a store and paid $80 to have them replace the cable and it works fine now.

  • My loudspeaker and lock button not working and my warranty has expired!!! I do not know what to do!!!! HELP PLEASE!

    My loudspeaker and lock button not working and my warranty has expired!!! I do not know what to do!!!! HELP PLEASE!!

    Those are hardware issues. You can try all of the software troubleshooting if you want. Restart, reset, restore from backup, restore as new. If that does not work, then your only option is to pay someone for something. The decision is up to you, but I've provided the options.

  • Forms - submit button not working

    A client asked me to create an eflyer with a registration form included to be emailed out. I added form fields to the form page and an email submit button. Works fine on my Mac - opens Entourage correctly addressed and with the xfdf file attached. Tested on Parallels Desktop running Windows XP Pro and this seemed to work too. However when my client tested it on her PC, when she clicked on the submit button nothing happened. It works for her on the web but understandably she want's it to work when people receive the PDF as an attachment to an email. She uses Outlook as her email client.
    Any thoughts? Many thanks.

    Mike
    Thanks for your comment. I've sent a new PDF to the client with the extended rights turned on and this still doesn't work, as you thought. I know I've read about how unreliable emailing PDF forms can be but I wanted a simple solution on a document that my client wants to email to her contacts. Maybe it's just not a good idea to start with though you'd think that seeing as how adobe have added the feature it might just work! When I tried on Windows running on my Mac when I clicked send it asked me whether I wanted to use local or web-based email which implied you could use either? (I don't have an email client currently set up under windows as I only use it for opening the odd PC only file that clients send me which is I guess why it asked the question rather than chaining straight into an email window).
    I'm attaching the document in question. The form is on page 3.
    Many thanks for your support

  • CRM Survey on Web - Submit button not working.

    Hi Gurus,
    We have created a Survey in CRM_Survey_suite. The Problem is, when we send the survey with one Question (mail goes out with a link, user click on the link and link take them to our QA Server BSP Page), the submit button is working but when we send survey with more then one question the submit button is not working (When we click, nothing happens), however the RESET button is working fine.
    Another interesting thing is, surveys with multiple questions are working fine in our Dev environment (The initial setup in dev was done by another consultant who is no longer with us).
    I am not an expert in this area and i have checked every single config that i know in DEV and in QA to my knowledge and the config is identical.
    Pls help.
    Thanks
    Nadeem.

    Hi,
    We are on CRM 4.0 with following support packs.
    SAP_BASIS     620             0054    SAPKB62054
    SAP_ABA             620             0054    SAPKA62054
    BBPCRM             400             0009    SAPKU40009
    PI_BASIS     2004_1_620     0010     SAPKIPYI5A
    ST-PI             2005_1_620     0003     SAPKITLQG3
    CRMIS             400             0004     SAPK-40004INCRMIS
    ST-A/PI             01G_CRM400     0000          -
    Regards.

  • Jspx Submit Button not working

    Hi. I am using Jdeveloper 11.1.2.1. on Windows. I noticed yesterday that may saves were not working. The submit button does not seem to function. so I built a very simple HR schema jspx form to test/debug the issue.
    When I test the application module I am able to make updates to data and add records -- when I press the commit on that, I can immediately see the results in sqlplus, so it is not a database privilege issue.
    However on the jspx form, the page flickers after pressing, validation does seem to work, but nothing saves.
    I created the form as a jspx, then dragged the employee "table" from the data control and made an ADF Form. I included navigation and submit buttons.
    When the form did not save,
    1. I tried dragging execute and placed on the form as a button, but that does not seem to work, create operation does create a new record, but can't save.
    2. I reviewed the source of the jspx page and found that xml for the submit button seems a bit sparse -- no action listener bindings.
    <af:commandButton text="Submit" id="cb7"/>
    3. I re-started weblogic
    4. I deleted out the system11.1.2.1.38.60.81 directory where the weblogic domain is stored.
    5. I logged into the weblogic administration form and couldn't find anything helpful.
    This is such a simple, yet relevant issue. I feel pretty stupid about it. I can't find anything on google, or in the forums. I am new to Jdeveloper, so am wondering if I haven't done something or have some other setting wrong.

    Thank you both for the (very quick) replies. It seems odd with that with all the built-in functionality, the Jdeveloper team would NOT implement this rather essential functionaity.
    Another thing I missed was that in the Data Control there is an "operations" folder (with no commit) as a subset of the Employees app module representation , and a second "operations" folder by itself, that contains the commit and rolllback. I had failed to notice this second Operations folder.
    Thank you again for your help.
    Stuart

  • IPod touch 5th gen. Home button stuck and power button not working! Please help!

    I have an iPod 5th Generation and the home button is jammed down! It felt sticky earlier but now it's stuck down. I used it when the home button wasn't working and had to use my notifications to change from app to app (as I didn't know about assistive touch). I turned it off, but now the power button is no longer responsive! The button isn't stuck, but it doesn't work anymore. It was working fine before, but now it won't respond. Please help!

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • TS3694 No sound and ringer button not working. I cannot play music but when I put my Iphone 4 on the dock it plays music. This happens when I updated my phone to IOS 6.1.3..The phone doesnt have any carriers we only used this just like Itouch. Please help

    Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.

    Hi there,
    Thanks for reaching out to the community.
    Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
    It appears like you may have a hardware issue with your ringer button and internal speaker that came to light after the update. If you have already restored your iPhone back to factory settings using iTunes, you may need to have your phone serviced.
    Some potential good news... Check your headphone jack for lint. There may be enough to cause a muffled connection. You can try to blow it out with compressed air or very carefully pulling out any solid objects that may affect the connection.
    Best of luck!

  • Backup and restore buttons not working

    Hi,
    Any button in my backup and restore centre with a shield next to it (for UAC) is not working. Identical to this thread:
    https://social.technet.microsoft.com/Forums/windows/en-US/6a138e65-2834-41ac-bd40-c2344e20b824/backup-and-restore-panel-buttons-not-working
    A fair way down that page, Lokesh replies but I don't have any of the software that he mentions in his post. Is anyone able to help?

    Hi,
    According to the Lokesh's reply, this problem is probably caused by 3rd plugin in Windows Explorer Shell. UAC dialog couldn't be prompt correctly.
    To resolve this problem, you can try to use ShellExViewer instead to make troubleshoot, please follow the content of the link below for more details:
    https://social.technet.microsoft.com/Forums/windows/en-US/5353106e-5b19-4a26-8446-72bedf40b169/rightclick-context-menu-in-desktop-appearing-slow-win-81?forum=w8itprogeneral
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • IPhone home and lock buttons not working at all?

    I got my iPhone 4 in October 2010. Since then I have accidentally dropped it on the floor and the back cracked, and in April 2011 I accidentally dropped it in a tub of paint. A bit silly, I know, but I managed to get all of the paint off quite easily and it was fine. However, at the end of last year, the home button started to malfunction and get stuck and just generally not work. In the past few weeks I've noticed I get trouble with it at least once a day and have to sit and press it until it works. Then, today, just out of nowhere, the lock/power button at the top of my phone just stopped working, it's stuck. I don't really have a way to wake my phone now unless I press the home button until it works, and I can't lock it anymore. I don't know whether it would be anything to do with the paint, considering it happened a year ago.  Is there anything I can do to get it working again or do I need to take it to Apple?
    Thank you very much.

    Ok this Might work
    1- Try rubbing your home button with alchohol ( or perfume ) in a circular motion for about 20 seconds
    2 - do the same to ur power button ( from left to right and repeat ) for about the same duration
    3- press and hold both your power and home button at the same time ..
    ... If this doesnt work try it one more time
    If it doesnt respond after the second time i'm afraid u'll have to take it to an apple care center :(
    Wish u luck

  • 8530 Track Pad and E buttone not working, also lines in photos.

    Device info
    Your carrier: SPRINT
    Model info and OS version: Curve 8530 5.0 Bundle 1675 (just upgraded)
    Apps and free space
    File free before and after a battery remove/replace. (Go to Settings, then Options, then status): 106575952
    Did a battery pull fix your issue?: No
    Apps installed and their version if possible. (Go to Settings, then Options, then applications): None
    BT device model/version (you will have to look at the BT device): None
    Scroll pad works on and off, will not work on some menus.  E key will work sometimes, usualt types an upper case E and not a lower case, will not type 2 E's in a row.  Works ok when typing a 2.  There were some other buttons giving issues a while ago and then it all went away and now this just started again out of nowhere.  I tried backing up / wiping the phone, upgraded to the latest software and it is still giving me issues.  The phone has never been exposed to any sort of moisture, I don't even use it in the rain.
    Another issue, possibly related, possibly not is that I get 1 vertical line and 1 horizontal line in my photos I take.  This started out happening sometimes and not other times but now it is constant.
    Thanks for any help / suggestions you can give.

    Is the phone still under warranty? If so, I'd contact Sprint as this sounds like its probably a hardware issue (especially if updating the software didn't help). If the phone isn't under warranty any more, let us know and we'll see if there is anything we can come up with that could help.
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

  • HT202159 mountain lion download interrupted and resume button not working

    mountain lion download interrupted and resume button not working

    From the App Store menu bar top of your screen, click Store > Check for Unfinished Downloads
    Keep in mind, for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
    If you need to reinstall OS X or repair the the startup disk using Mountain Lion Recovery, that requires broadband access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation.
    You may need to temporarily disable anti virus software to download apps from the App Store including Mountain Lion.
    Make sure your Mac qualifies to run Mountain Lion >  Apple - Upgrade your Mac to OS X Mountain Lion.

  • Submit and Reset button not working

    Hi, am new in the forum, php, dreamweaver and flash.
    i have been working on a website for my client using flash, and i had to create a form
    on my contact page that user can use to submit their queries.
    i managed to download a step by step code using php. It guided me through everything
    but my problem is once i uploaded the website on the server the button submit and reset it not doing it job.
    here is the website. www.kulaevent.com
    it takes couple second for the contact form to appear.
    Please help, please

    Thank you
    I have checked the link you gave and i managed to update my form and i uploaded
    on the site and it worked.
    Thanks again

Maybe you are looking for