Signature message in form

i created a form in xi. when my client opens the form in reader 10.1.6 he gets a message - click "sign" then when ready to save, click "done signing".
when i open the file in reader xi, i don't see the message. i don't use signatures so i'm not sure what this message means. any help? thanks.

No.

Similar Messages

Digital Signature problem : Adobe forms

Hi Experts,
I am facing one issue in Adobe forms while implementing Digital Signature in one of the Custom Adobe form. I am following some steps as mentioned in the below link
<link to blocked site removed by moderator>
The problem is when I execute my Adobe form I am not getting SIGN button in my generated form as mentioned in the link.
I am using Adobe Live cycle designer 8.2 and Adobe reader 9.
Please help me out on this since I am new to Adobe forms as well.
Thanks
VJ
Moderator message: this is the wrong forum, please have a look in the forum for "SAP Interactive Forms by Adobe".
Edited by: Thomas Zloch on Oct 21, 2011 1:56 PM

Apart from the above question can anybody guide me whether do we need Adobe Acrobat instead of Adobe reader to implement Digital Signature in Adobe form.
Looking forward towards some useful suggestions!!
Thanks
VJ

Add a digital signature to a form?

How can I get a signature on a form?

Actually let me step back - I jumped to a solution to quickly... Can you tell me what you use case / workflow is? What do you want to accomplish? Knowing that will help me point you in the right direction. Also it would be great if you could send me an example of your form (just send me a private message using the forum)
Randy

How to print a signature in Adobe form using PCL - HELP!

Hello,
I'm using Adobe LiveCycle and I'm trying to get my form to print a signature at the bottom right on the given signature line. Our HP LaserJet printer has a SIMM installed which contains the signature in digitized form. I need to issue a hexadecimal instruction using PCL which contains the code that tells the printer to print the stored signature. I know this is doable in SAPscript, but is it doable in Adobe???
Thank you,
Eileen

Hi Eileen,
I think it is handled differently in Adobe forms as here all the print data is created by ADS.
See the document Digital Signature Setup at:
www.service.sap.com/hrin -> Media Center -> Key Documents
This decribes the process.
The link below and SAP Note 1168740 also contain information.
http://help.sap.com/saphelp_nw70/helpdata/EN/46/1ca382f3ec5873e10000000a11466f/frameset.htm
Regards,
Aidan

Display error message in forms from function "verify_function"

Hi,
We have a number of users with our own created profile attached to them.
We have enabled the 'PASSWORD_VERIFY_FUNCTION' for our own profile.
Function "verify_function" is used to validate a user's password.
In "verify_function" we have used "raise_application_error" message in case password validation fails.
Example:
raise_application_error(-20001,'Password must be minimum 8 characters in length and maximum 30 characters long');Question) "raise_application_error" displays the error message only in SQL Plus prompt. How do I display the same message from Oracle forms?.
I have used DBMS_ERROR_TEXT & DBMS_ERROR_CODE in ON-ERROR trigger. This is not displaying the error message in forms in case validation failed in "verify_function". Oracle simply clears the username/password field with a new window. We want to display the error message that occured in "verify_function".
Thanks

use the following code in validating the item, e.g when-button-pressed
begin
verify_function;
exception
when others then
message(sqlerrm);
raise form_trigger_failure;
end ;
OR
instead of writing a procedure rewrite it as a function to return 1 if password is correct or 0 if password is wrong
Regards
Jihad

How to delete hyperlink (Remove signature) in a form created with InfoPath

Hello.
We have Sharepoint 2013 Foundation in production. It work with forms created with InfoPath. In these forms, digital signatures are used to approve. The problem is that once you have signed the forms, the user can remove the signature. That's what we want to
avoid.
Which file should I edit to remove the hyperlink? I can not find how to do it. Do you know a better option?
Greetings.
MCSA: Windows Server 2008

Hi,
According to your post, my understanding is that you want to delete hyperlink (Remove signature) in a form created with InfoPath.
As far as I know, there is no OOTB way to achieve this. You need to use custom code to prevent removal of digital signatures.
Please add the OnBeforeChange handler code to the "signatureN" group where the signature is stored, not to the section you are signing.
In other words (my excample) browse to :
Tools - Form Options - Digital Signatures - "Enable digital signature for specific data" - Modify/Add
Note the "Store signatures in the following group" value. It will be a read only value, eg /my:myFields/my:signature3/my:signature4
Here is a similar thread for your reference:
http://www.infopathdev.com/forums/p/3661/12829.aspx#12829
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Report canceled with message 'No forms available',

We are stumped.
I created a simple ABAP HR report using the PNP logical database. It pulls benefits info and master data for displaying on the screen.   (Associates Eligible for FMLA)   No ALV grid, just a simple write to the screen.
The job runs fine in in the background as well as foreground in DEV, QAS, and STA .
But now that the program is in PRD, when we run it in BACKGROUND, the job CANCELS after 10 minutes.
The spool lists the message 'No forms available', several dozen times, and then 'No memory for cua processer'.
Oddly, the program runs fine in forground.
Any clues how I can get this program to run in background?

Job log Messages:
12:48:38    Job started
12:48:38    Step 001 started (program ZPRCR_DISABILBITY_ELIGIBLE)
12:48:50    No forms available
12:57:47    No forms available
12:57:48    No memory for cua processor
12:57:49    Job canceled
I looked at the code and there are no ABAP 'check' statements, nor reference to sy-mandt.
There is code in the 'at selection-screen' section that puts out a warning if the program is ran in foreground without a date.
if pn-begda is initial and sy-batch is initial.
    message e000(zpa) with 'Please enter a run date'.
endif.
Other than that, the program runs fine in foreground in PRD, but cancels in background. The same code runs fine in foreground and background in all our other clients.    Our BASIS group is stumped too.
Thanks
Doug

Multiple Digital Signatures on a form

I need to get five signatures on a form but each time I sign it, it makes me save. After two saves (and two signatures), I could no longer click on the signature fields. I need to use this form to get a job entered for my building. Please help. Thank you.
V/R,
IS3 Poirier, Jon

Hi,
I doubt that the addition of a second signature actually invalidates (the red X icon) the first signature, but rather it shows the signature as Valid with Changes (the pen & yellow triangle icon). Technically, that is the correct signature status, but because it caused so much confusion, beginning with version 9, we've changed the user interface and stopped indicating changes to the PDF if the only change is a subsequent signature.
If on the other hand you are getting the red X for the first signature please let me know as I'd be curious to see the file.
Steve

Signatures in a form

Hi,
I am recreating all of our forms into Active forms using Livecycle Designer 8.2 and the majority of our forms, that go out to a very large number of stakeholders, require a signature by one or more persons. I am wondering if anyone has come across a secure, effective, legal, user friendly way to add a signature to the form?
I have not been able to find out alot of information on sigantures so any pointers will help or tips on where to find information.
Thank you.
Jennah

Jennah
I'm not sure I fully understand your question. Are you looking to add signatures in an automated fasion in an ad hoc fasion, or did you want to design the forms with signature fields already on the PDF form?
Assuming you are using LiveCycle Designer to create the forms, you can ad signature field(s) to the form when you create the forms. When a user clicks on the signature field, they will be prompted to select a digital certificate to sign the form with. Note that if the end users only have Reader, the form will need to be Reader Extended (to enable the ability to sign a PDF with reader)
There are other third party methods to sign PDF documents such as CIC's SignIt.
here are some links that may be of use:
http://www.adobe.com/security/
http://partners.adobe.com/public/developer/security/index_security_partners.html
http://www.adobe.com/security/digsig.html
Regards
Steve

ADOBE Form - How to include digital signatures in adobe forms?

Hi all,
Can any one tell me the procedure for including a digital signature in adobe form?
Thanks,
Vineel.

Hi,
If you have a third party software which captures the signatures (Ex: ePad), then you can have that integrated to SAP where all the signatures get stored as in SE78. From here you can insert directly in Adobe Form using Graphic Content method in an image field. Hope this is helpful for you.
Regards,
Ram

Adding a digital signature to a form

Hi all,
I'm new adobe designer and have been tasked with creating an on-line registration form. So far I have been able to add all the fields and such for users to enter their information.
I have read through the forums and found out how to add little bits of javascript and stuff to the forms too.
At the moment I have a four page form with stacks of questions.
There is a question I have on there that is a check box with the usual "I accept the terms, blah, blah" on it and I need that field to act as a digital signature, or if not that, apply a signature to the form when the submit button is hit.
At the moment I have regular button as the submit button as I needed to be able to change the body and subject of the email at run-time and could only get it to work through javascript at run-time.
If anyone knows how to get this to work, I'd appreciate the help as I have no idea what I'm doing!
Cheers,
Dave

Hi,
It depends on where you placed the script, probably best place is the exit event.
if (this.rawValue != null || this.rawValue != "")
this.access = "readOnly";
else
this.access = "open";
This will only lock the field that the script is inside.
You should check out Paul's example LockAllFields, which contains a function in a script object. While Paul calls this from a click event in a button, you could call it fromthe exit event of the particular text field.
Re: Saving Fillable Form as non-fillable PDF
Hope that helps,
Niall
Assure Dynamics

Digital Signatures on Scanned forms

Is it possible to apply Digital Signatures on Scanned form; i.e can we add a hidden signature field?
Thanks,
Nith

Answered my own question. These numbers represent the time zone of the area where the digital signature was created.

Facing error message oracle.forms.webutil.ole.OleFunctions bean not found.

hi all,
I have a 6i form which generate data into excel, I have migrated with in 10g, configure Webutil, attach webutil in form, create object group by webutil.olb, replace all ole2 with Client_ole2.
there is no problem in compile time but when I run that form and Click on Generate button then it show below message.
oracle.forms.webutil.ole.OleFunctions bean not found.
CLIENT_OLE2.create_obj will not work
please help

Hi BaiG,
thanks for your reply, I have done Step 7 successfully and start step 8.
I was following your step no. 8 (below Step)
8. Sign Webutil JAR files by running these following commands Make sure Form Builder is Closed
"C:\DevSuiteHome_1\forms\webutil>sign_webutil.bat c:\DevSuiteHome_1\forms\java\frmwebutil.jar"
"C:\DevSuiteHome_1\forms\webutil>sign_webutil.bat c:\DevSuiteHome_1\forms\java\jacob.jar"
But when I do that step on my Dos Prompt then it show below message and run.
D:\DevSuiteHome_1\forms\webutil>sign_webutil.bat d:\devsuitehome_1\forms\java\frmwebutil.jar
Generating a self signing certificate for key=webutil2...
keytool error: java.lang.Exception: Key pair not generated, alias <webutil2> already exists
There were warnings or errors while generating a self signing certificate. Please review them.
Backing up d:\devsuitehome_1\forms\java\frmwebutil.jar as d:\devsuitehome_1\forms\java\frmwebutil.jar.old...
1 file(s) copied.
Signing d:\devsuitehome_1\forms\java\frmwebutil.jar using key=webutil2...
'jarsigner' is not recognized as an internal or external command,
operable program or batch file.
There were warnings or errors while signing the jar. Please review them.
D:\DevSuiteHome_1\forms\webutil>sign_webutil.bat d:\devsuitehome\forms\java\jacob.jar
The given jar file d:\devsuitehome\forms\java\jacob.jar does not exist.
D:\DevSuiteHome_1\forms\webutil>sign_webutil.bat d:\devsuitehome_1\forms\java\jacob.jar
Generating a self signing certificate for key=webutil2...
keytool error: java.lang.Exception: Key pair not generated, alias <webutil2> already exists
There were warnings or errors while generating a self signing certificate. Please review them.
Backing up d:\devsuitehome_1\forms\java\jacob.jar as d:\devsuitehome_1\forms\java\jacob.jar.old...
1 file(s) copied.
Signing d:\devsuitehome_1\forms\java\jacob.jar using key=webutil2...
'jarsigner' is not recognized as an internal or external command,
operable program or batch file.
There were warnings or errors while signing the jar. Please review them.
Can you please tell me, how can I solve that problem.

Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

When opening a form in SharePoint 12013 that was created from Infopath 2013, I get the following error.
You do not have permissions to access a database that contains data required for this form to function correctly.
An entry has been added to the Windows event log of the server.
Log ID:5566
When I go to the log files on the SharePoint server. I see the following error.
Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
I am guessing this has something to do with the UDCX connection and the database.
Can anyone help me get this fixed?

Hi Jim,
Please check the following kb article when it occurs 5566errro with the UDCX conection file, try the method of using the Secure Store Service to store alternate credentials for the data connection method, or the method of stating the credentials
in the UDC file explicitly.
Also check if it could help with setting sql server as "SQL Server and Windows Authentication mode".
http://support.microsoft.com/kb/981684
Thanks
Daniel Yang
TechNet Community Support

How i add digital signature in interactive form

Hi gurus,
I want to upload an Digital Signature in Adobe forms. Could any body tell me the procedures please help me out.
Thank you,
pawan

Hi Pawan,
Inorder to make use of Digital Signatures in forms, you have to first configure the ADS based on SSL and not Basic Authentication. Refer to the ADS Configuration guide for the same.
After the configuration using SSL as the security mode, you need to place a signature field when designing the Adobe form.
In addition you need to create a signature in Adobe Reader(if used to display the form) which you can use to sign the document at runtime.
Hope this helps.

Signature message in form

Similar Messages

Maybe you are looking for