Signature NOT coming on top (Checked the option as well)

When I check the box for "place signature above quoted text", the signature is still displayed at the bottom of the email when adding a signature manually. This is really frustrating since I respond to a client and then use a signature at the end of the email in all of my emails. Currently, when the box is checked, the signature is always placed at the bottom. Is there anything I can do about this? If I cannot resolve this, I'll have to move back to Entourage and all of the work moving will be wasted. Any help would be greatly appreciated.

This is driving me mad too.
I have just tested this and found that if I have selected a signature in the Preferences using Choose Signature and checked Place signature above quoted text then the selected signature does get placed correctly.
If one then replies to an email this default signature will be used, but it can be changed to another signature and this change replaces the signature text above the quoted text. So use a default signature that is general but applicable to all recipients then have client specific signatures that can be selected from the list.

Similar Messages

  • I am trying to sync a playlist to my Nano,  but when I click on the Music tab at the top, it will not allow me to select the option Selected Playlist, Artists, etc.  I cannot un-check the Entire Music library option and check the Selected Artist - on

    I am trying to sync a playlist to my Nano,  but when I click on the Music tab at the top,
    it will not allow me to select the option Selected Playlist, Artists, etc.  I cannot un-check the Entire Music library
    option and check the Selected Artist … one.
    I have changed the Sync option to Manually sync, but that does not help.
    How can I change this to the second option?
    Thanks.

    There is a checkbox above those two options for how to sync.  It says Sync Music; it enables automatic syncing.  That box needs to be checked before you can select from the two options for how automatic syncing is performed.
    NOTE:  If the iPod is current set up to Manually manage music [and videos], checking that Sync Music box replaces its current content with content from your iTunes library, based on how automatic syncing is set up on that screen.
    So, if your goal is to add ONE playlist to an iPod that is managed manually, you do not want to do this because iTunes will erase the iPod's current content and replace it with just that ONE selected playlist (and whatever else you select on that Music settings screen).
    Instead, if the iPod currently uses the manual setting, you need to add playlists manually to the iPod (not use the automatic syncing setting).  Please post back with more details about your situation. 

  • Help!!! How to make quicktime plugin do not display on top of the web page?

    Any one knows how to make quicktime plugin do not display on top of the web page??? I've tried to change the zIndex property using javascript, but it doesn't work.
    Because we have some widgets which are required to be moved to anywhere on the page, we use iframe to implement that, so it can display on top of quicktime plugin, but the plugin flickers sometimes when we do some operation on the widget which is on top of it.
    Anyone can helps me? Thanks in advance!!!
      Windows XP Pro  

    > Can you tell me how to set the script so that the
    lightbox image is
    > displayed
    > on mouseover instead of mouse click.
    Check the docs. Trent is usually very thorough in his
    instructions.
    Hint: I haven't studied it but it probably involves modifying
    one of DW's
    built-in Behaviors.
    Walt
    "ducati1" <[email protected]> wrote in
    message
    news:gkb906$qrd$[email protected]..
    > Wow that DW extension is just what I needed.
    > Thanks..
    > Can you tell me how to set the script so that the
    lightbox image is
    > displayed
    > on mouseover instead of mouse click.
    > I currently have the thumbnails set to insert the ALT
    text into a text box
    > on
    > mouse click.
    >

  • WAS Java not coming up after maintaining the wrong hostname in p4 via visua

    Dear Experts,
    We have 701 Solman installed and utilizing it for CTS. After the hardware fail over the CTS functionality stopped woking, then we refered the Note 1389833 - Deployment to a 7.10 or higher J2EE engine does not work and made the changes accordingly,
    while making changes the ip was mistyped and now the java server is not coming up.
    Due the problem in java visula admin also is not up and we unable to revert the entry.
    Please find the error message in java dispatcher
    #1.#00145E776DCA0010000000030039609A0004B2CA5AAA2124#1322482081079#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:6]_13##0#0#Error#1#/System/Server#Java###Core service p4 failed. J2EE Engine cannot be started.
    [EXCEPTION]
    #1#com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open  server socket on 145.17.50.189 and port 50004. Exception: The socket name is not available on this system.', Arguments: []> : Can't furceBundle, key com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open  server socket on 145.17.50.189 and port 50004. Exception: The socket name is not available on this system.
            at com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor.<init>(TransportMonitor.java:219)
            at com.sap.engine.services.rmi_p4.dispatcher.P4ServiceFrame.start(P4ServiceFrame.java:98)
            at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
            at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
            at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
            at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:82)
            at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:154)
    Kindly help in how to revert the value 0.0.0.0 for p4 if visual admin is not available.
    Regards
    Balamurugan

    Hello Bala,
    Please check the hostname of p4 in the instance profile parameter icm/server_port_X.
    Please take a look at note 609603, if you haven't gone through it yet.
    Thanks,
    Siva Kumar
    Edited by: Siva Kumar Arivinti on Nov 30, 2011 11:29 PM

  • Error 0x00000709 operation could not be compleated Double check the printer name etc.

    After installing my new printer and removing all other printers from my computer I now can not make the only printer listed as my default printer. I get this error 0X00000709 operation could not be completed Double check the printer name and make sure it is connected. I have done all that over and over again. I also I have reinstalled the old printer software and tried to default to my new printer at that time and still the same error. I have checked my register and it has the old printer listed but does not allow me to change it. I now have removed all but the new printer from my computer but I still can not make it my default printer. Programs such as Adobe only recognizes the default printer (which is not there any more) and don't even list the new printer as an option. The printer works just fine accept with the programs that uses the default printer. The Windows Hardware and Device Troubleshooting finds the problem (printer not set as default)but can not fix it.
    I sure wish someone out there could help me get rid of the error and allow me to default my printer again. I have noticed other people have had this same issue with error 0X00000709 using other Windows versions as well. I have been trying to resolve this issue for the past three months and would appreciate any and all ideas.
    I have an HP Pavilion elite HPE 337C computer running with Window 7 and I installed my new HP LaserJet PRO CM1415fnw color MFP printer.  My old printer that I removed (but is still listed in my Regester) was an HP 6500 inkJet.

    After doing some research on the net:
    This link provided an answer:
    https://exploreb2b.com/articles/solving-error-0x00000709-cant-set-default-printer-problem
    Regedit -> HKEY_CURRENT_USER -> Software->Microsoft->Windows NT->Current Version->Windows
    One of the entries you should see in the right hand pane is“Device”. If the value for “Device” as noted under the “Data” area is anything other than the printer you are using, then highlight “Device” in the right hand pane with the mouse and press the delete key to remove it. (I edited it and put the name of the printer I wanted to be the default)
    VI.      Restart the computer so it starts with the altered Windows system registry. (Italics mine)

  • I have installed my brother computer and is in my printers and devices but is not coming up as a printer option in adobe pdf Help I was able to print PDFS before installing adobe now I cant

    I have installed my brother computer and is in my printers and devices but is not coming up as a printer option in adobe pdf Help I was able to print PDFS before installing adobe now I cant

    Be sure Safari does not have the Block Pop-Up Windows preference set.
    Where I work now there are several unencrypted VLANs that require authentication, and Safari promptly pops up a window for me to register every time.

  • Why is Firefox connecting to the Internet and installing updates when I have checked the option to "Check for updates, but let me choose where to install"?

    Firefox is connecting to the Internet by itself (i.e., I have not opened the browser) and then installing updates (e.g., Firefox 28 today) even though I have checked the option under Advanced to "Check for updates, but let me choose where to install." I am using Windows 7 on an HP EliteBook behind my company's firewall.

    Reset your firefox and try once again!!!
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Datas are not coming from top to bottom in collumn

    Hiiiii
    I am moving my data from itab to itab1.
    And in itab1 datas are not started from top of the collumn for each a/c no.
    A/CNO|AB|DZ|RV|SA
    00001|00 |000|00 |10
    00001|00 |000|00 |15
    00001|00 |000|020|000
    00002|00 |15 |000 |00
    00002|21 |00 |000 |00
    00002|00 |25 |000 |00
    00002|00 |00 |000 |17
    what should i do to start my data from top of the collumn.
    Thanks in advance.
    Edited by: sanket sagar on Mar 17, 2011 8:14 AM

    Hi,
    Let me add some more comments in your code.
    LOOP AT IT_BKPF INTO WA_BKPF.
    IF SY-SUBRC = 0.    - do not use this statement. instead of this u can use a condition for a particular record. ( Eg: if wa_bkpf-belnr is not initial.)
    MOVE-CORRESPONDING WA_BKPF TO WA_FINAL.
    ENDIF.
    READ TABLE IT_BSEG INTO WA_BSEG WITH KEY BELNR = WA_BKPF-BELNR
    BUKRS = WA_BKPF-BUKRS
    GJAHR = WA_BKPF-GJAHR.
    IF WA_BSEG-SHKZG = 'H'.
    WA_BSEG-PSWBT = WA_BSEG-PSWBT * -1.
    ENDIF.
    IF SY-SUBRC = 0.
    MOVE-CORRESPONDING WA_BSEG TO WA_FINAL.
    ENDIF.
    APPEND WA_FINAL TO IT_FINAL.
    ENDLOOP.
    I think the above loop-endloop will get all the belnrs, and their related info to the final internal table.
    SORT IT_FINAL BY SAKNR BLART.
    LOOP AT IT_FINAL.
    IF WA_FINAL-BLART = 'AB'
    MOVE WA_FINAL-PSWBT TO WA_FINAL-PSWBT1.
    ENDIF.
    AND SAME FOR ALL DOC TYPES.
    ENDLOOP.
    SORT IT_FINAL BY HKONT .
    What is the structure of the internal table.
    If my understanding is correct, you want to populate a table as below.
    For every HKONT, populate the Document types (BLART) and their corresponding amounts like below.
    HKONT1 - AB - 1000
    HKONT1 - BC - 2000
    HKONT3 - CD - 2000
    Please correct it if your problem is something different.

  • Server does not return query metadata check the query

    hi,
    i want know how to  use bex query designer,
    when i  insert a data provider,the message is appear "server does not return query metadata check the query",
    who can help me ?
    thanks a lot !
    addition: my current entironment is: gui710 with sp4,bi710 with sp2.

    Hi,
    All the yellow and red lights will have an effect on query performance or execution.  Read up on them as there are too many to explain via this forum.
    There is a document on SDN on query performance.  Some useful links:
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9f4a452b-0301-0010-8ca6-ef25a095834a]
    [http://help.sap.com/saphelp_nw70/helpdata/en/41/b987eb1443534ba78a793f4beed9d5/frameset.htm]
    [http://help.sap.com/saphelp_nw70/helpdata/en/d9/31363dc992752de10000000a114084/frameset.htm]
    [http://help.sap.com/saphelp_nw04/helpdata/en/2e/caceae8dd08e48a63c2da60c8ffa5e/frameset.htm]
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0501cb9-d51c-2a10-239c-c141a22c45a6]
    Cheers...

  • The Data Access service is either not running or not yet initialized. Check the event log for more information

    Hi,
    I have SCSM with remote SQL and the SCSM Management server give below error
    Message: Failed to connect to server ‘Name of Server’
    Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. —> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://ServerName:5724/DispatcherService.
    The connection attempt lasted for a time span of 00:00:04.0070932. TCP error code 10061: No connection could be made because the target machine actively refused it IPAddress:5724.  —> System.Net.Sockets.SocketException: No connection could be made
    because the target machine actively refused it IPAddress:5724
    I had try to restart SQL & MS with same error,
    Also i had try the following
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/c670d54d-3a92-481f-8dc9-55c475ad196f/problems-with-data-access-service-after-rebooting
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/26dc1d5c-fa82-403f-8949-3073f3b82a60/the-data-access-service-is-either-not-running-or-not-yet-initialized
    Not help meRegards

    I had same error before 
    below steps to solve it
    Make sure SQL Server Running & ServiceManager Database not full
    Stop All SCSM Services,
               System Center Management Configuration
       Microsoft System Center Data Access Service.
       Microsoft Monitoring Agent
    Rename Health Service State to Health Service State_old --- @ "C:\Program Files\Microsoft System Center 2012 R2\Service Manager"
    Start SCSM Services
        Microsoft Monitoring Agent
               System Center Management Configuration
       Microsoft System Center Data Access Service.
    Wait 2 min...
    check Event Viewer... 
    hope this help you.
    Regards, Ibrahim Hamdy

  • My iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my prob

    Hello everyone my iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my problem please

    Hey Kirby17,
    Thanks for using Apple Support Communities.
    If you are not getting any sound from the speaker, follow this article.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved, please contact Apple Support.
    Have a nice day,
    Mario

  • This is not a discussion, i want the option to not install other products when i download an update.

    this is not a discussion, i want the option to not install other products when i download an update.

    Download the Adobe Flash Player installer directly by clicking one of the following links.
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    THERE'S your option, right there.

  • The project could not be created,please check the webroot folder(it may overlap with an existing project)

    Error msg: "The project could not be created, please check
    the webroot folder (it may overlap with an existing project)." This
    occurs in the CF/Flex Application Wizard Pproject Information
    Window on a Flex3 application. I checked to make sure that there
    were no overlapping applications and the message still persists.
    There are old threads on this from Flex 2 but the problem still
    exists in newly released Flex 3. Please help!

    I can't help you with this, but you are not alone. A friend
    of mine has exactly the same problem

  • Birthdays noted on my calendar will not print unless I check the box "other" on the print dialogue screen.  I'm using OS Yosemite 10.10.1.

    Birthdays noted in my contacts and calendar mac screen will not print unless I check the box "other" under "calendars" in the print screen dialogue box.

    Birthdays noted in my contacts and calendar mac screen will not print unless I check the box "other" under "calendars" in the print screen dialogue box.

  • Why is the Photostream option on my icloud (on my MacBookPro) not allowing me to check the box?

    When I click into the icloud on my MacBookPro, All the options are blackended, allowing me to place a check mark next to each option. The Photostream option is not blacked out, so I cannot check it. I also recently upgraded to the OS X Mountain Lion 10.8.2) Any suggestions for help? Thanks!

    I'm not aware of any issues with iPhoto 9, it appears to work just fine for me.
    If you are making a judgement from what you see in these communities, don't forget that you aren't seeing a balanced review of any product, the communities here are like doctors waiting rooms were the only people there are ill, you wouldn't conclude the human race was sick because a visit to the doctors.

Maybe you are looking for

  • How do I remove an icloud account from my iphone??

    I don't have the password...I set this icloud account when I was in college...I have since set up my icloud account with a more current email contact, but when I synced my new phone it shows the old college email on my icloud. I tried to recover my p

  • Help - I think my hard drive may explode

    I just installed Itunes and it immediately started converting a bunch of music files that were already on my computer. How do I stop this? I have over 160 gigs of MP3s, and Im afraid I will run out of room on my hard drive if they are all converted.

  • How to download video?

    On my previous hard drive with an earlier Mac OS, I had found apps that allowed me to download a variety of videos in nearly all formats -- .wmv, .mpg, .flv and more. With a new hard drive and SnowLeopard, most will not download. I don't recall what

  • How do i get into my ipod touch when forgoten password

    i cant get into my ipod because i forgotmy password but my ipod wount show up on itunes please help me fix it thank u

  • Interspersed screen Issue while publishing the file in captivate

    I have noticed some images/backgrounds in published file overlapping with images in previous frames (Interspersed screen). It always happens when we publish the captivate file more than once. How can it be avoided. Following are the details I think m