Signature of package "SYS.DBMS_BACKUP_RESTORE" has been changed

Hi all,
The Rman backups for the production database is continously failing since yesterday with Ora-04062 error. Did compiled the Database package (DBMS_BACKUP_RESTORE) manually but the issue is not sorted out.
The database version is 9.2.0.8 on Sun Solaris 5.10 version.
Could any one let me know what is the next step to get the issue sorted out.
Thanks
Kumareshan

Yesterday early morning we got this error message:
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03007: retryable error occurred during execution of command: allocate
RMAN-07004: unhandled exception during command execution on channel sbt1
RMAN-10035: exception raised in RPC: ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.DEVICEALLOCATE
Later the Backup team linked the NMO library, since then we are getting this error message (ORA-04062).
The database version is 9.2.0.8 and the Catalog database version is 9.2.0.5
kumareshan

Similar Messages

ORA-04062: signature of package "SYS.UTL_RAW" has been changed

I have a form that was migrated from 6i to 10g.
I get the following error in the form in 10g.( Not in 6i )
ORA-04062: signature of package "SYS.UTL_RAW" has been changedIf I execute the same code from sqlplus in 10g. It works..no errors
This is the code
set serveroutput on
Declare
   P_chksum Varchar2(40);
Begin
   P_chksum := DBMS_OBFUSCATION_TOOLKIT.MD5(input_string => 'P-STRS');
   dbms_output.put_line('P_chksum='||P_chksum);
   P_chksum := UTL_RAW.CAST_TO_RAW(P_chksum);
   dbms_output.put_line('P_chksum='||P_chksum);
End;
SQL> start test_cksum.sql
P_chksum=Ì]\š#³³MÝÜ~Jèo²
P_chksum=CC5D5C9A23B3B34DDDDC7E4AE86FB209
PL/SQL procedure successfully completed.Any idea why I get this error in forms 10g only?
Thanks

Issue resolved. Something to do with compilation of the form.

Signature of package APPS.FND_GLOBAL has been changed

On Opening the R12 forms, getting the pop error
APP-FND-01926 The custom event WHEN-RESPONSIBILITY-CHANGED raised unhandled exception
ORA-04062 signature of package APPS.FND_GLOBAL has been changed.
On Clicking OK, it opens switch responsbility form and then it shows the same error.
APPS.FND_GLOBAL package is valid too. How to rectify this? Plz help

Enabled the trace and got the below information.
Error Message: FRM-40815: Variable GLOBAL.IGI_INSTALLED_GLOBAL_VAR does not exist.
Error Message: FRM-40815: Variable GLOBAL.IGI_INSTALLED_GLOBAL_VAR does not exist.
Error Message: FRM-40815: Variable GLOBAL.IGI_PREV_ORG does not exist.
Error Message: FRM-40815: Variable GLOBAL.IGI_INSTALLED_ORG_VAR does not exist.
Error Message: FRM-40815: Variable GLOBAL.OPM_GML_INSTALLED1 does not exist.
Error Message: FRM-40735: WHEN-NEW-FORM-INSTANCE trigger raised unhandled exception ORA-04062.
Error Message: FRM-40400: Transaction complete: 1 records applied and saved.
Error Message: FRM-40735: WHEN-NEW-FORM-INSTANCE trigger raised unhandled exception ORA-04062.
Plz help on this !!!
Karthik
Edited by: cRazy DBA on Jan 3, 2012 5:24 AM

ORA-04062: signature of package "APPS.OE_HOLDS_PUB" has been changed

Hi All,
We are getting the below message while entering a sales order .
ORA-04062: signature of package "APPS.OE_HOLDS_PUB" has been changed
FRM-40735: WHEN-NEW-BLOCK-INSTANCE trigger raised unhandled exception ORA-04062.
Please help me.
Regards,
Dash

Hi,
Was this working before? If yes, what changes have been done recently?
Do you still have any invalid objects after compiling it?
Please go through the steps in (Note: 550364.1 - FRM-40735: Pre-Update Trigger Raised Unhandled Exception ORA-04062) and see if it helps in fixing the issue.
Regards,
Hussein

ORA-04062: Signature of package ... has been changed

We've had a repeated situation where an unaltered package spec has been recompiled, which was in excess since only the package body has incurred a change. But, our Oracle Forms application throws the ORA-04062 error nonetheless when trying to access the package.
I originally assumed that the spec had actually changed when this error came up, and didn't do any additional research. But this time around, I checked, and only the package body is different. The spec, though compiled, is identical to the version that was there prior.
What makes up the "signature" and why does Forms keep thinking that a recompile equates to a signature change?
--=Thanks
Chuck

chuckers wrote:
We've had a repeated situation where an unaltered package spec has been recompiled, which was in excess since only the package body has incurred a change. But, our Oracle Forms application throws the ORA-04062 error nonetheless when trying to access the package.
I originally assumed that the spec had actually changed when this error came up, and didn't do any additional research. But this time around, I checked, and only the package body is different. The spec, though compiled, is identical to the version that was there prior.
What makes up the "signature" and why does Forms keep thinking that a recompile equates to a signature change?
--=Thanks
Chuck
04062, 00000, "%s of %s has been changed"
// *Cause: Attempt to execute a stored procedure to serve
// an RPC stub which specifies a timestamp or signature that is
// different from the current timestamp/signature of the procedure.
// *Action: Recompile the caller in order to pick up the new timestamp.default behavior is TIMESTAMP change which can be over rode to
only force (re)compile what number or parameter type changes

ORA-04062 (Signature has been changed)

Hi Sir,
I need to ask about Developer Forms problem?
We have one software version for many clients, but somtime we get runtime
message ... ORA-04062 (Signature has been changed)... on our forms ... and we
have to recompile the form source ... but in some cases this is not posible
because we don't have the apropiate enviroment... get it?
Now my question, Is there some way to catch (Database way maybe) why the
signature problem is showing ?, in other words, How can I get the extactly
declaration or specification or whatever, is causing the problem ... basically
because we don't have the enviroment and the time to go watching into the code
source...
Thanks in advanced,

Hi,
We are using remote_dependecy_mode = 'Signature'.
And we don't change the package spec frequently.
Our situation is like this :-
We have 3 schemas Development, Test, Production.
All of the above three schemas are completely identical.
Now, we develop a form in development schema, Test it in Test schema and deploy it in production schema. We use forms 6i application server.
Now, the form that is development schema is deployed in Test/ Production schema in Application server we get the error ORA-04062 (Signature has been changed).
Is there anything that we are missing. Can anyone suggest how to get rid of this error. Previously we were using Oracle 8.1.7 and everything was fine. Recently we migrated our database Oracle 9i release 1 and we started getting this error in above situations.
Thanks,
--Malay

Java.sql.SQLException: ORA-04062: timestamp of function has been changed

Hi,
Environment:
We host our java 1.5 , j2ee application on multi-clustered environment connecting 2 app servers to 1 node of oracle RAC cluster.
We have batch jobs running daily in the morning, that does a new data upload to the production DB. (Load to a Tmp table, Drop the production table, rename Tmp table to production table and re-create indexes.)
Recent Change:
We recently migrated from Oracle 10.0 version to 10.1...
Issue:
With the recent change, we started facing the error, 'ORA-04062: timestamp of function has been changed' for the STORED PROCEDURES that we use in the application. And I am sure that this is because of the job that runs in the morning, as it re-creates the tables that are used by the stored-procedures. So the stored-procedures become invalid and requires recompile. And we did recompile as well, but still the same error. And then changed the mode from 'TIMESTAMP' to 'SIGNATURE', but still the same error(ORA-04062: TIMESTAMP (and not SIGNATURE) of function has been changed)...
We are stuck here not knowing what to do. It would be helpful if you can assist me here with any idea on why this is happening? The only solution we found right now is to restart the tomcat on application servers. This resolves the issue to 100%. Would this mean there is a problem with my database connection in the application?
Thank you,
Pradeep.

The only solution we found right now is to restart the tomcat on application servers. This sounds to me as though TomCat is caching information about procedures & functions & does not know they have changed.
04062, 00000, "%s of %s has been changed"
// *Cause: Attempt to execute a stored procedure to serve
// an RPC stub which specifies a timestamp or signature that is
// different from the current timestamp/signature of the procedure.
// *Action: Recompile the caller in order to pick up the new timestamp.

Re : apn of smartone hong kong has been changed

the apn of smartone hong kong is changed to "internet" now and would like to see an update soon.
thank u.
Message Edited by cs15user on 21-Jan-2010 09:45 PM

The only solution we found right now is to restart the tomcat on application servers. This sounds to me as though TomCat is caching information about procedures & functions & does not know they have changed.
04062, 00000, "%s of %s has been changed"
// *Cause: Attempt to execute a stored procedure to serve
// an RPC stub which specifies a timestamp or signature that is
// different from the current timestamp/signature of the procedure.
// *Action: Recompile the caller in order to pick up the new timestamp.

How can we find out data in an editable ALV grid has been changed or not?

Hi Experts,
How can we find out whether a data in an editable ALV grid has been changed or not.
I am using the
FM -> REUSE_ALV_GRID_DISPLAY_LVC
for ALV display.
I have to chekc whther data has been changed or not befor saving. if changed then only i want to
SAVE
. I cannot use the internal table comparison method for this purpose also i am not using OOP ALV.
So kindly sugest me an alternative.
Thanks and Regards,
Shahana

Hi,
Thanks for your answer. I already saw this post.
See this method.
CALL METHOD reuse_alv_grid->check_changed_data
IMPORTING
e_valid = lv_check.
This will update the internal table with the edited values. Then we can go for internal table comparison.
But my scenario will not allow me for itab comparisons.I just want to know the ALV data has been changed or not.
Regards,
Shahana

Is there a simple way to detect a textfield value has been changed on exit?

The filler may enter the textfield then type something and revert it back,
any command that can simply detect a field's value has been changed on it's exit event?

Niall,
I was thinking if there is any simple command like xfa.event.prevText in dropdown box that I can use,
anyway, thanks for your help.
Rgds.

Clicking on iTunes ikon and I get the message the item iTunes.exe that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly. What can I do, I can't open Itunes. I have over 4000 songs in iTunes that I had

When I click on the iTunes ikon I get a box pop up which reads Problem with shortcut. The item iTunes.exe that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly.
My computer which is a packard bell vista operating system, recently stopped working as the power supply overheated and blew up and it has recently been sent back to the Know How team at PC world and it seems to be since it came back I now cannot open iTunes. I have also tried to search for iTunes in the search bar, I can see several files, but can't seem to open any of these either. I think that quicktime isn't working, either.
I have over 4000 songs in iTunes that I had recorded from my collectiong of CD's am going to loose all these now? Can anyone help, with very easy instructions as I really don't know what I am doing??
Thanks

I would copy over the entire thing if you have room. With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account. While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases". If you have an iPhone, iPod and/or iPad...you can do the same thing from each device. Nice new feature...just remember that those ripped CDs need a back-up!!! Enjoy...

Office Add-in Request Definition has been changed error

Hi,
When refreshing a request in Excel sometimes I get the error "Request Definition has been changed on server since last download. Please use Edit Prompts and Levels to select new filters.". However, I haven't changed the request.
The idea is to have some Excel files ready to be refreshed according to some period. To prevent the changing of the request definition, the request is filtered with dates returned by another request. With this approach I have managed to alter the dates and have a normal refresh without any problems. However sometimes (even when not changing the interval dates) I get this very same error.
Can anyone explain this or know any workaround to prevent this?
Thanks!

Hi
Did anyone came back to you with help on this issue?
If yes , can you please share that with me as i am also facing the same issue here.
Please mail me to [email protected] when you have sometime for this.
Thanks a lot.
Regards
Mano

Facebook is my home page on Mozilla; everytime I go to log in, my browser has been changed to proxy. I have to change this every time in order to get face book to load; how do I stop the browser from changing to proxy?

My internet option state "do not use a proxy" but each time I go to long in on Firefox to Facebook, the proxy server has been changed to showing proxy and I can not get on to facebook until I go in and change it back to Do Not use Proxy. The problem is the setting does not stay but every time I go back to long on it's back to proxy server? How do I get it to not change???

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

My apple id account was hacking. My password has been changed. how do I retrieve my password?

my apple id account was hacking.
My password has been changed.
how do I retrieve my password?

Call Apple and ask for Account Security. http://www.apple.com/contact/

How can I update the thumbnails in the slide panel when a slide has been changed?

When the text in a slide has been changed, how can you update the thumbnail in the slide panel to reflect this change?
We translated slides, but the slides in the slide panel are still in English.
Thanks for your help.

the slides should update automatically as you type
are you using a theme you created yourself, or one you have added for this show?
when you play the show, does the slides show correctly? If they are OK you could still show the presentation.
also what Mac are you using and what graphic crd is installed?

Signature of package "SYS.DBMS_BACKUP_RESTORE" has been changed

Similar Messages

Maybe you are looking for