Signature text not picked up in standard correspondence SAP10

Hello FI experts
There is a requirement in my project to send standard letters to vendors and cutomers. I have doen all the settings, correspondence type, form etc.has been done; but the signature text is not picked up in the form. I have dfefined the signature text in the configuration in->
FA global settings-> Corrspondence->Define sender details for correspondence-> text id "ADRS"-> signature text
I have defined the programs and variants. The form is picking the header and footer texts in the output, but the signature text is not being picked up. Please let me know why its not picking? I have created the same also in SO10.
Please help.
Regards,
Van

Closing the thread. By mistake posted in PS.

Similar Messages

Changes in Signature text not carried forward to the next server

Hi All,
I changed the Signature TExt in Global Server.
I need to transport this to development server.3
After moving the transport, no chagnes are updated in development.
I moved the transport 3 times.
Please help me in solving this problem.

Hi
Signature texts needs to be maintained by opening the client , these will not be tranportable.....
Please check the export & import process once again..
Regards
Suresh

Custom field's text not getting displayed in standard report

Hi All,
I have a requirement like this .
There is a Custom field which we have added in a standard FICO report ie S_PL0_86000030 ( G/L Account - Balances ).
The custom field is added through a report painter , while seeing the config of report painter the custom field is showing the selection text , but when we run this transaction S_PL0_86000030 , the technical name of that field appears in the selection screen .
For example if the field is ' matnr' then we give the text as 'Material Number' . Then in the screen this field is getting displayed as Matnr instead of Material Number.
Please suggest me on this.
Thanks,
Sumit

In transaction GRR2
Insert->
selection parameters ->
take the variable type as >Tesxt varaible for selection parameter
chosse >material no.
hope ths helps
Bhanu

Text File is not picking with data

Hi Experts,
I am doing file to file scenario without IR as file will be generated by the ECC system and places in SAP FTP App Server.
My job is to pick up the file and send it to the Third Party Application Server.
But when i am picking up the Text file the data in the file is converting into special characters like below format.
ÅÁÄÅÙ@ððððððâÖÕÄÅçöôðð@@@@@@òððùð÷ñ÷ðñ%@@@@@@@@@@@@@@òððùð÷ñ÷%ÄÅãÁÉÓ@ðððð
I have tested with other Application server with same file its working fine, but when i send the file from SAP FTP Appl server the data is converting in the above format.
Right now when i open file zilla it is opening with 3 FTP Appl Server in that suppose lets say the FTP are APP1, APP2, APP3.
1.When i send the file from APP1 through Transport Protocol NFS System the file is picking up and placing successfully in the Third Party APP3 App Server fiolder but the data in the file is converting into special charaters.
2.when i send the same file from APP2 through Transport Protocal FTP the file is picking up and placing successfully in the third party APP3 App server and here the same data is coming in the text file, there is no data conversion.
I am not getting here, when i send the file from APP1 the data is converting but when i send the same file from APP2 App srever the data is posting correctly.
And also i can give you one more info.. if i try with puting the Transport Protocal as FTP in APP1 then i am getting error in sender comm channel as 'log on attempt by User JOHN rejected' : contact your FTP server vendor.
But i think for sending the file from SAP Appl Server we can use TP as NFS rather than FTP.
And also i can give one more info: The Version is the ECC system is using the 4.6c for which there is no compatability for unicodes.
Can anyone please advise what would be the wrong.
Appreciate your inputs
Thanks,
Bhaskar

Hi,
Reason because file is not picked up.
>'log on attempt by User JOHN rejected' : contact your FTP server vendor.
clearly user/password for this FTP server or system is not correct. Get correct userid/password for your Application server where you are trying to poll.
>The Version is the ECC system is using the 4.6c for which there is no compatability for unicodes
File transfer is nothing to unicode here.
Regards,
Gourav

Standard manager is not picking up new requests 1533 requests are pending

Hi all,
Currently we are in R12.1.3 with DB 11.1.0.7 on RHEL 5
Suddenly Standard manager is not picking up any new requests actual and target are same but pending requests count reaches 1533 also conflict resolution manager actual & count is same but pending requests count is 219.
We can find some error messages as follows in the manager logfile of Internal manager log file as
"Found dead process: spid=(32711), cpid=(64450), ORA pid=(17), manager=(0/1)" apart from this message there is nothing error in standard manger log file as well as cCRM logfile.
even we checked alertlog file also nothing error message all mount points having free space,Please help us it is on PROD Instance
Thanks in Advance

"Found dead process: spid=(32711), cpid=(64450), ORA pid=(17), manager=(0/1)" apart from this message there is nothing error in standard manger log file as well as cCRM logfile.Please check if you have any errors in the database log file.
Concurrent Processing - Service Manager Processes Are Not Starting After System Restart - usdsop cannot redirect standard output [ID 733901.1]
Many Defunct Processes Created on System [ID 461684.1]
Concurrent Processing - CCM.sql Diagnostic Script to Diagnose Common Concurrent Manager Issues [ID 171855.1]
Concurrent Managers Will Not Start ORACLE error 60 in insert_fcp [ID 1256084.1]
Why Are Dead Process Found In The Standard Manager Log File? [ID 246584.1]
even we checked alertlog file also nothing error message all mount points having free space,Please help us it is on PROD InstancePlease stop the CM, run cmclean.sql script, start the CM and check then -- Concurrent Processing - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables [ID 134007.1]
Thanks,
Hussein

Standard Manager Not Picking Up Request

Hi ,
Standard Manager is not picking up the requests.All the request remains in Pending Normal State. If I exclude the same request and assign it to another Manager , It is running successfully.
Note Read/Followed : 555081.1,1304305.1,144921.1 ,158149.1
Standard Manager is not working in Oracle Ebusiness Suite 11i
https://kr.forums.oracle.com/forums/thread.jspa?threadID=947860
Any Idea I tried Increasing the Processes. Teminated all the requests through backend.
Nothing is there in ICM Log File and Standard Manager File
EBS is R12.1.3
OS : AIX
DB : 11gR2
Regards
Sourabh Gupta

Hi Sourabh,
After Running the Autoconfig and bouncing CM , it works.Good to hear that.
Any Specific reason issue only get resolved after Autoconfig On Apps Tier ? Since I Have run CMCLEAN.sql and Link the FND Libraries Yesterday .Not really as no errors are reported in the CM log file.
Running AutoConfig and cmclean.sql would resolve CM issues in most cases if no errors are reported in the CM/Database log files.
Thanks,
Hussein

Import Standard Purchase Order not picking data when submitted from backend

Hi,
As part of my code, I am inserting Purchase order information in the interface tables with process_code = 'PENDING'. Then using fnd_request , i am triggering the Standard Program for importing these Purchase Orders. The standard program is getting triggered and completing normally. But it is not picking any records. I am calling the program as follows:-
              -- Setting the org_id so that the import program will run for that particular org_id.
              fnd_request.set_org_id(r_org_id.org_id);
               -- Submit the Import Standard Purchase Orders by calling the standard program for respective org_id
              l_req_id := FND_REQUEST.SUBMIT_REQUEST(application => 'PO'
                            ,program      => 'POXPOPDOI'
                            ,description => 'Import Standard Purchase Orders'
                            ,start_time => SYSDATE
                            ,sub_request => FALSE
                            ,argument1 => NULL
                            ,argument2 => 'STANDARD'
                            ,argument3 => NULL
                            ,argument4    => 'N'
                            ,argument5    => NULL
                            ,argument6 => 'APPROVED'
                            ,argument7 => NULL
                            ,argument8 => NULL
                            ,argument9 => NULL
                            ,argument10 => NULL
              COMMIT;
When I am submitting this same program from front end, for the same set of records using the same set of parameters, the records are getting picked.
Any suggestions for this?

Hi
Do you have a copy of your insert statement?
regards

Table of Contents Not Picking Up HEADER text

I have a number of sections in my Pages 5 document. I have unique headings in the Header for each section and have applied a paragraph style to these - HEADING 1. However none of the HEADING 1 headings are appearing in the table of contents. I have HEADING 1 ticked in the TABLE OF CONTENTS window on the right hand side of the Page 5 window.
It feels like a bug or does TABLE OF CONTENTS not pick up paragraphed style text from the header?

Very odd!
Seems Pages 5 all you do is chase rabbits down rabbit holes.
I like being able to do T.O.C.s for every section but with all the other downgrades in Pages 5 it isn't worth fighting.
Pages '09 should still be in your Applications/iWork folder and just works, much better than its "upgrade".
Wait for Pages 5 to get out of beta and rate/review it in the App Store.
Peter

We have a 5s active on our account. After turning on a previously active 4s (it had the same number) The 5s can no longer place call and when you call it from another phone the 4s rings, but will not pick up. Texting over the cell networks works fine.

We have a 5s active on our account. After turning on a previously active 4s (it had the same number) The 5s can no longer place call and when you call it from another phone the 4s rings, but will not pick up. Texting over the cell networks works fine. Any suggestions??

hens0861,
Hmm, let's ensure this is working as it should be! So what phone should be active on your account? Did you switch the devices online or how to did you activate the 5s? Please share details.
KarenC_VZW
Follow us on Twitter @VZWSupport

Regarding contract sales tab value not updating into the standard VA42 t-co

Hello Experts!!!
How to add screen shots in sdn...
so that i can add my screen shots in SDN
The below shown screen shot is the output of our Zprogram.The table field name:VBKD-BZIRK, where is has been marked as red colur in box.
While dropping the from Source contract to Target Contract, where the value is not picking to the target contract and finally it is not displaying in the Standard VA42 transaction
     Input value
That same field should come in the final alv output and also include in the va43 transaction sales tab( sales district)
This value must then be inserted into every document which is being transferred.
The above input field dragged from Source Contract to Target Contract, the picked value should reflected in the VA42 transation , but it is not effecting.
Regards,
Preethi...

i already used same But it's not working
s_order_header_inx-updateflag = 'U'.
Line items
REFRESH: i_order_item_in, i_order_item_inx.
LOOP AT t_data INTO wa_data.
    LOOP AT t_data_item INTO wa_data_item WHERE vbeln = wa_data-vbeln. .
BAPISDITM
      i_order_item_in-itm_number = wa_data_item-posnr.
      i_order_item_in-profit_ctr = wa_data_item-profit_ctr.
BAPISDITMX
      i_order_item_inx-itm_number = wa_data_item-posnr.
      i_order_item_inx-updateflag = 'U'.
      i_order_item_inx-profit_ctr = 'X'.
      APPEND: i_order_item_in, i_order_item_inx.
    ENDLOOP.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = wa_data-vbeln
      IMPORTING
        output = wa_data-vbeln.
    CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
      EXPORTING
        salesdocument     = wa_data-vbeln
        order_header_in   = s_order_header_in
        order_header_inx = s_order_header_inx
        behave_when_error = 'P'
      TABLES
        return            = it_return
        order_item_in     = i_order_item_in
        order_item_inx    = i_order_item_inx.

Digital Signature Text is too big, how to make it take up less room?

I added a digital signature to a PDF and part of it is a real handwritten signature. The digital signature text was also added but it is taking up too much room on the signature line. I would like to make the real signature large and the text part of the digital signature smaller. I cannot seem to find oout how to make this happen. Is it possible? If so, can someone please supply the steps?

hi Axl....
I've got tiger in ok, running fine - bought family pack and have done 3 installs without problem, so that's the good news ....
I did a major reshuffle and toss-out of files before I installed - bought 80gb mobile external hard drive - and did install with 5+gb free, so after it had about 3gb free, then all of a sudden I went down to less than 1gb
I've been in a hunt for more files to throw out (a nice find were the old ipod updaters that were eating 500mb) ....
If I want to throw out most of the language files (for instance) ... where are they ? (I did search for danois and found nothing, so .... buried ?)
any other suggestions for things to throw away .... I've pretty much eliminated 90% of all things classic, for instance ....
and - do you have ideas for why space seems to disappear so fast .... I'm not doing anything special, but wham, 2gb flies away to ???
thanks

HP Photosmart Plus B209 - will not print photos - tray is not picking up the paper

The printer will not grab the photo paper when I attempt to print a picture. It works just fine when printing other things, such as text from WORD or something from the internet. Photo paper says "single sheet feed" on it, so I place one sheet in the tray.
Any ideas? Am I doing something incorrectly? Thanks

Hi hgr7,
I understand that you are having an issue with the photo tray picking up the paper. I will try my best to help you with this problem. In this document for The All-in-One Does Not Pick Up or Feed Paper From the Photo Tray there are several steps to resolve this issue.
I hope this helps, let me know.
Thank you,
I worked on behalf of HP.

Info record Po text not printing in Po

Hi all,
Info record po text not printing in po print out. Info record po text showing in po at item level but it was not printing in po. In info record No matl text checked. In material master no text maintained. please help on this
Thanks in advance for your help

Hi Mahesh,
Follow the path:
SPRO--> MM --> Purchasing --> Messages --> Texts for Messages ---> Define texts for Purchase Order
Double click on "Texts for Document Item" under Dialog Structure
Click on new entries and then Fill the following fields:
Pur. Doc. Category: Purchase Order
Print Operation: New
Doc. Type: NB
Item Category: Standard
Text Object: Purchasing Doc. Item texts (EKPO)
Text Id: Info Record PO Text (F02)
Print Sequence: 2
Print Priority: 1
and then Save
Hope this helps
Thanks,
Ankur

Moving average price of subcontracted material not picked for Cost estimation

Hi Experts
I have the below scenario:
Finshed Product A has components B, C.
C is a subcontacted material and it has its own BOM with components D & E.
We are maintaining moving average price for the subcontracted material C, (because the subcontracter is adding X & Y in addtion to the components D and E, which are sent from us).
In the mateial maste of C, Procurement type is F and Spl. procurement type 30 are maintained.
When i do costing for the Finished product A, moving average price of C is not picked up (where as system calculates the std cost for C by adding the values of D & E and purchase info record price).
Is there any way to Calculate Price of A by using the mvg avg price of C.
I maintained the below valuation variant settings.
If i remove the spl. procurement type 30 in the material master of C, it picks up the mvg. avg price. but it affects the MRP planning of items D & E.
Please advice.
Thanks in advance.
Regards
Bala

Hi Big choi
Thanks for your response.
I understand.
1. if we maintain spl. procureent key 30, system calculates standard cost based on raw material and service charges.
2. If we don't maintain spl. proc key, it considers the material as purchased and picks the mvg avg price from material.
But, is there any way to pick the moving avg price from material master eventhough i maintained the spl. procurement type 30?
Thanks
Bala

Gross Price is not picked up upon creation of a requisition from a network!

Hi gurus,
I would like to seek for help, actually problem is related in SD but I pose this thread here because it is related in debugging issue.
do you know about "perform ROW_OUT " function? we have a bug that is very rare, when user select gross type with figures (ei. 1000, or any number).. system will not pick up the value instead it will be default in ZERO, but when user try to select again it output the correct expected result,,I debug it a dozen times but i cant catch the zero issue, *(-creating watch point wherein TBTWR = 0 and TBTWR <> 0 and the last point of intersection is in row_out sunction and MOVE-CORRESPONDING IX_ESLL to: ESLL) /* Is there someone OF you encountered this ?? if theres one please give some insight on how you pin point the problem in system .. note: all related program and process here is all standard (No custom program involve)..
Cheers,
Mark

Hi
Generally for posting FI documents (which is what this T Code does) , M alone is used which is the standard SAP system functionality. For other purposes like valuation, translation, etc. we can have different exchange rate types.
Jayaram

Signature text not picked up in standard correspondence SAP10

Similar Messages

Maybe you are looking for