Signature updates and CSM error message

Hi,
I have started getting the following error message in CSM when pushing signature updates to our 4200 series and IDSM-II blades:
Could not get device version after pushing down sensor update package to device
The actual signature updates work fine, but just wondering if I can get rid of this error message.  Any ideas?
Many thanks

Hi Dustin,
Here is the deployment log for one of the devices:
Device version before update is: 7.0(2)E4S581.0
Going to send the following package(s) to sensor: IPS-CS-MGR-sig-S583-req-E4.zip,
Processing package file: IPS-CS-MGR-sig-S583-req-E4.zip
Package is ready for update
Checking analysis engine status from device XXXXXX
Analysis engine is up running and device is ready to take updates
Pushing package: IPS-sig-S583-req-E4.pkg to device
Device did not respond to pushUpgrade command from CSM. It may have been upgraded. Will query to find out
Device not ready, retry getVersion in 30000 milliseconds. (1/16)
Device not ready, retry getVersion in 30000 milliseconds. (2/16)
Device not ready, retry getVersion in 30000 milliseconds. (3/16)
Device not ready, retry getVersion in 30000 milliseconds. (4/16)
Device not ready, retry getVersion in 30000 milliseconds. (5/16)
Error when trying to update: Could not get device version after pushing down sensor update package to device: XXXXXX. Please access the device using Command Line Interface, and check if it is working properly
Device version before update is: 7.0(2)E4S581.0
Going to send the following package(s) to sensor: IPS-CS-MGR-sig-S583-req-E4.zip,
Processing package file: IPS-CS-MGR-sig-S583-req-E4.zip
Package is ready for update
Checking analysis engine status from device XXXXXX
Analysis engine is up running and device is ready to take updates
Pushing package: IPS-sig-S583-req-E4.pkg to device
Device did not respond to pushUpgrade command from CSM. It may have been upgraded. Will query to find out
Device not ready, retry getVersion in 30000 milliseconds. (1/16)
Device not ready, retry getVersion in 30000 milliseconds. (2/16)
Device not ready, retry getVersion in 30000 milliseconds. (3/16)
Device not ready, retry getVersion in 30000 milliseconds. (4/16)
Device not ready, retry getVersion in 30000 milliseconds. (5/16)
Error when trying to update: Could not get device version after pushing down sensor update package to device: XXXXXX. Please access the device using Command Line Interface, and check if it is working properly

Similar Messages

  • Update and restore error messages on iPod touch 2nd Gen

    Hi folks I'm searching for a solution for the error message I have received when i connected my Ipod touch to my PC. I got notification that there was an update for Itunes available and would i like to download, i chose not to at this time as all i wanted to do was quickly put some music onto the ipod touch. I also had a notification that there was new software updates for the ipod itself, being how have had some of the issues this update was supposed to fix I clicked to download update and install.
    since then i have had an error message telling me i now had to Restore my ipod, As it is in recovery mode due to an error occuring during software update. I didnt want to do this as i have not synced the Ipod to the PC in quite some time and had purchased content via itunes and appstore on the ipod itself and was affraid i'd lose all this.
    I realised i had to restore to sort the issue out and have been trying in vain to restore the ipod for 2 days now. Every 'fix' or 'solution' on the help page has failed so far. the error message help page is here:
    http://support.apple.com/kb/TS1275
    i have done everything on that list and still the issue wont go away, the number in brackets relating to the error message i receive is (14) every time.
    I have a log of the last attempt to restore and failing which i copied before sending the information off to Apple. If anyone can help i'll be eternally grateful.
    my ipod is a 16gig 2nd gen touch and obviously since its somehow in recovery mode i cant use it at all, and all i have on the screen is the usb cable and the itunes icon.

    ok update:
    I was looking at other threads that had similar issues as I'm having, I decided to dig in the PC a bit, i went to My computer/C drive/Documents and settings/<user name>/Application Data/Apple Computer/iTunes/iPod Software updates
    to get the Application Data folder to become visible goto the Tools heading and select Folder Options, goto the View tab, then click the radio button that has "Show hidden files and folders" next to it, click apply, click ok. The application Data folder now appears in the directory.
    I then Deleted everything inside the iPod Software updates folder.
    Turned off my Anti virus and went to http://www.felixbruns.de/iPod/firmware/
    I selected my iPod and downloaded the update to my pc. Opened iTunes and shift clicked restore, i found the recently downloaded update on my desktop and installed it. Now my iPod has finally restored! success! yes!!
    so now that we have got the iPod working again i need to know, since it is totally blank now what can i do about retrieving the songs, movies, apps and games i have paid for via the ipod touch itself? I have spent a lot of money on these and would like them back. Any ideas folks?
    I can see my purchase history when im in iTunes i goto the Store tab and select my account. its all listed there but no option to re-download the content.
    Thanks for any help on the matter

  • I had itunes on my Dell laptop, i downloaded an apple update and now error message 126

    I had itunes on my Dell laptop, i downloaded an apple update and now I get error message widows 126 and error message MSVCR80.dll. Help please.

    Hi Gabriel,
    Thanks for visiting Apple Support Communities.
    If you are receiving errors in Windows after updating iTunes, I recommend completely removing and reinstalling the software using the instructions in this article:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    When reinstalling iTunes (step 3 in the article above), be sure that you are logged in to your computer as an Administrator:
    Make sure you have an administrator account.
    To install iTunes or QuickTime, you need to log in as an administrator on the computer. If you're not sure you have an administrator account, you may find this Microsoft article helpful: Windows 7: How do I log on as an administrator?You can refer to the Help documentation from Microsoft, contact your IT department, or visit support.microsoft.com for more information.
    From:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Best Regards,
    Jeremy

  • ITunes 11.4 update and system error message?

    I recently updated my MacBookPro iTunes to 11.4.  As soon as it was "completed" I got the following error.
    System Extension Cannot Be Used
    "/system/library/extensions/AppleUSBEthernetHost.kext" was installed improperly.
    What does this mean? Is it a problem?  How can I fix it?
    I also updated my Epson printer software at same time, but I'm thinking the error message is not related to the printer.
    Message was edited by: Kawahine

    Browse the forum history.  There's been dozens of topics about this over the past week.

  • 2.2.1 update and now error message every few seconds

    Did the update this morning. All went fine. I have never used airplane mode. So phone was not in it.
    Now all I get every few seconds on the phone, even while in sleep mode, and it wakes the screen is message:
    This accessory is not made to work with iphone. Would I like to turn on Airplane mode to eliminate audio interference etc… Yes/No
    If I do nothing the message goes away and the iphone goes back to sleep.
    I tried selecting yes. It put phone into airplane mode. But message stills comes up. Same thing when I selected No.
    This error comes up every 30 seconds or so. I have tried hard restarting the iPhone hold down Home and top button until iPhone shuts down. This didn't do anything.
    Anyone else having this problem?

    This is very weird. You can always restore the phone again in iTunes. If you have proper backups (pics, contacts, music, apps), after restoring, set it up as a new phone so there is no potentially corrupted backup getting on there. See if that works. If not, take it to the Apple Store and have them look at it.

  • Received an iTunes update and then error message "iTunes was not installed correctly.  Please reinstall iTunes. error 7 (Windows error 126) I also received and error message that MSVCR80.dll was not found.  I read online to unintall all Apple programs and

    Was not enough room to finish.  I tried to uninstall all Apple programs and reinstall but I was asked to validate an unidentified publisher and don't have a clue what that is and could not remove programs.  I am not good at fixing stuff on the computer and would like some help with this.  I have had iTunes for a long time without issue.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • HT203200 I upgraded to 11.4 and get error message -50 when trying to signin. My PC is XP.

    I reinstalled iTunes 10.? as could not previously show all new podcasts and apps, only some, this new upgrade showed all new podcasts and apps. But then could not sync at all so I downloaded 11.4, now I cannot signin and get ''We could not complete you iTunes store request. An unknown error occurred (-50).''. Have turned off Windows firewall to no avail. Firewall is not enacted in my other anti-virus program.

    Hello there 1Romans1,
    In the research I have been doing it seems like this specific error is usually caused by some sort of security software as it secures incoming and outgoing packets. Take a look at this section of the article iTunes: Specific update-and-restore error messages and advanced troubleshooting found here http://support.apple.com/kb/ts3694#error50
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    There are other steps in the article but they are more for restoring/syncing issues. I feel these are the important ones for your situation.
    Regards,
    Sterling

  • I have updated my iTunes to the latest edition and now my iTunes wont open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?

    I have updated my iTunes to the latest edition and now my iTunes will not open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?

    Solving MSVCR80 issue and Windows iTunes install issues.

  • Can not update Photoshop CC (2014) and receive error message U43M1D206. What do I do?

    Can not update Photoshop CC (2014) and receive error message U43M1D206. What do I do?

    Bump
    I am also having the same issue with a lot of the softwares i have downloaded. Its unable to download the initial patch update.

  • I am running Windows 7 (64bit) , and an error message appears following a recent update to iTunes v 11.1.2:  "iTunes could not connect to the iTunes store. An unknown error occured (-3212). Make sure your network connection is active and try again." help!

    I am running Windows 7 (64bit) , and an error message appears following a recent update to iTunes v 11.1.2:  "iTunes could not connect to the iTunes store. An unknown error occured (-3212). Make sure your network connection is active and try again." I have dug a little bit into possible problems but haven't found a solution yet, one note is that the network connection is OK. A response would be highly appreciated!  Thanks in advance.

    Hi c1r1g1,
    If you are having an issue connecting to the iTunes Store, you may find the following article helpful:
    Apple Support: Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    - Brenden

  • I have tried several times to install iTunes update 11.1.4 on my PC.  I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126).  I am told to reinstall iTunes, but nothing changes

    I have tried several times to install iTunes update 11.1.4 on my PC.  I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126).  I am told to reinstall iTunes, but nothing changes.  What next?  I've not had this problem with other updates requested by Apple.

    I have also had the same problem with my Win 7 32 bit computer.  I had great help from Apple techs in Montreal and Orlando for 2.5 hours.  They helped me remove every trace of Apple products and clean the registry in two different ways.  Each install gave the same problem!  If Apple techs can't fix it (on some of our machines) then we are really in trouble.  They promised to raise it with the "engineers" and get back to me with a solution.  I am waiting and hoping.  Otherwise maybe version 11.1.5 will have a fix ??

  • I just set up my new iMac, and receive error messages when trying to purchase from the iTunes store (error 8003) or update from the App store (error 403 forbidden). THOUGHTS?

    I just set up my new iMac, and receive error messages when trying to purchase from the iTunes store (error 8003) or update from the App store (error 403 forbidden). THOUGHTS?

    I am not sure what you mean by "Flash Player for steam"; the only Flash Player installers I know is the ActiveX (for Internet Explorer) and the plugin (for other browsers); you can find both at http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
    [topic moved to Flash Player forum]

  • When playing my ipod on an ipod dock the vocals are very faint. It is fine when doing through the headphones. I am trying to sync for updates and getting the message "An unknown error occured (-1)" - help

    When playing my ipod on an ipod dock the vocals are very faint. It is fine when doing through the headphones. I am trying to sync for updates and getting the message "An unknown error occured (-1)" - help

    Error -1
    Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    Also see:
    -1 error
    -1 error too

  • I have been trying to update iTunes 11.1.3 to 11.4 and the error message says "an unexpected error occured. iTunes cannot be installed. Anyone can help

    I have been trying to update iTunes 11.1.3 (8)  to 11.4 and the error message says "an unexpected error occured. iTunes cannot be installed". Anyone can help?
    I have a Mac Book Pro with OS X 10.6.8

    If your profile is correct you are using 10.6.8 Snow Leopard.   The latest iTunes version for that OS is 11.3.1    If your profile is wrong and you have 10.9.5 Mavericks, then the iTunes version is 11.4.    You cannot use Mavericks versions on Snow Leopard.

  • Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll - what went wrong and how to resolve this?

    Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?

    Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

Maybe you are looking for