Signatures and Links
I'm wanting to add a link in my signature. I did it successfully once but now when I click "Add" under Link it takes me to a list of recent web pages. It may very well be the page I want but when I click that it asks if I want to download this application. How do I get to where I put the URL in the Link box and then get the underlined text in my message? Something changed. CraigT
Curious, indeed. It does the same thing on my Mac. One way to get around it, I think, is to create your signature with the link in a new message (it does work there), then cut and paste it into the new signature you create in preferences.
Similar Messages
-
Mail problems: signatures and links
I had a problem with Mail yesterday. Somehow I lost the connection between the app and my server, and I had to redo the configuration. When I finished I had all my own mailboxes, but the InBox was still empty, though I could view the new and old messages on the server. I finally got one of our IT guys to figure out what was wrong and he fine-tuned the configuration and my messages were loaded back to my InBox from the server. I mention all that because I suspect it may somehow have caused the problems I have found today.
Signatures: When I open the signature preferences, I have 3 signatures that appear and I can change most everything, except at the bottom where I should be able to choose which signature I want, the only one listed is None, and it is grayed out. So how can I get it to recognize the 3 signatures in the box above that?
Links: When I get an email that has some links imbedded in it, when I click on any of those links, in any of those such messages, nothing happens. I can sometimes go around that by hovering on the link, copying it down on paper, then typing it into the URL blank, but some of the links are so long that is not a reasonable workaround. I really need such links to work for me. Any suggestions?
All help with both problems will be much appreciated."G5 iMac Mac OS X (10.6.5)"
No G5 iMac (non Intel) can run Snow Leopard. Therefore, you must have an Intel iMac. See KB Article: http://support.apple.com/kb/HT1758 *How to identify iMac (Mid 2007) and later models*
Please correct your system info so that you can get the proper troubleshooting suggestions.
I have requested that a HOST move you post over to the proper forum area so that you will not have the need to repost.
!http://i51.tinypic.com/9bkxeq.gif! -
Is it possible to add a hyperlink to an image used in the mail signature block? Example: if I wanted to add the facebook logo in my sigature block and attach the link to it...or am I limited to only typing out the address in my signature? Thanks.
Hi Tom,
http://hints.macworld.com/article.php?story=20070321094439128
http://email.about.com/od/macosxmailtips/qt/et_sig_link.htm -
How do i get Facebook/Twitter logos and links in my signature?
How do I get Facebook and Twitter logos and links in a signature in apple mail?
# At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP), and then click Add-ons. The Add-ons Manager tab will open.
# In the Add-ons Manager tab, select the Extensions panel.
# Select the toolbar you wish to remove.
# Click the remove button.
# Click "Restart now" if it pops up. Your tabs will be saved and restored after the restart.
After Firefox restarts, install the [https://addons.mozilla.org/en-US/firefox/addon/searchreset/ Search Reset Tool]. This will remove the rest of the traces of this program from your Firefox.
For further information, please read [[Remove a toolbar that has taken over your Firefox search or home page]].
Did this fix the problem? Let us know! -
I am trying to update iTunes to new version .
When it goes to install i get a message saying iTunes has an invalid signature and will not install.
Any help please.Go directly to Apple link to download
http://support.apple.com/kb/DL1426
Select "Save" instead of "Run". Once downloaded, double click the iTunesetup.exe to install. -
Digital signatures and view document througt URL
Hello together,
We use status document and digital signatures workflow and we canu2019t use URL link to documents which have been approved. In browseru2019s window I see digital signatures information and error :u201DHTTP 404 the web page cannot be foundu201D.
In transaction SOLAR01, SOLAR02 when, I display approved document, at first I see the windows with digital signatures information and then, after push enter - required document.
If document in status u201Cin progressu201D we donu2019t have problem.
Could you help me to resolve this problem or disable windows with signatures information?Hello Francesco,
I want to generate a digital signature (PKCS#7,XML) using SAP SSF API as explained in
http://help.sap.com/saphelp_nw04/helpdata/en/4f/65c3b32107964996a56e4165077e24/content.htm and in Amol Joshi's reply in
Digital Signatures and Document Encryption api
so my question is From which PI/XI version and its SPS this SAP SSF LIBRARY is supported ?
Kind Regards,
Kubra fatima. -
Digital Signature and SharePoint 2013
Dear Expert,
My company has a plan to do digital signature and sharepoint 2013. Now, we focus for internal use that I know use AD CS. and in near future we use for external use. We plan to buy 3rd party certificate.
My question
1. How to implement this solution? Please suggest
2. If I implemented AD CS, can we use public certificate in near future.
3. Can we use public certificate with SharePoint 2013?
Thank youHi,
Based on your description, my understanding is that you want to use Digital Signature in SharePoint Server 2013.
You can use digital signatures in forms ,then use these forms in you SharePoint site.
In InfoPath form ,you can change the form to allow signature here: File>Info>Advanced form options >Digital Signatures .You can choose to sign the whole form or a field .
https://social.technet.microsoft.com/Forums/en-US/0ed54d57-d67d-41cd-bd1b-9e5a4be10d0c/use-of-digital-signature-in-sharepoint-2010?forum=sharepointcustomizationprevious
besides, here is a similar post, you can take a look at:
http://sharepoint.stackexchange.com/questions/78058/custom-digital-signatures-or-hash-on-list-items
For more information about implemented AD CS, refer to the following link:
http://technet.microsoft.com/en-us/library/hh831574.aspx
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support -
PKI- Digital signature and doc cypher
Hello everybody, I have a problem and I need help please. This is my situation:
I would like to cypher a world document and add a digital signature. I want to use certificates to do so. That is why I have developed a PKi in order to get certificates to use digital signature and ASYMMETRIC encryption. I have to add that I am trying to assure
non repudiation, integrity and confidentiality of word documents.
Is there any way to do it? if so, how can i do it and what software application do you recommend? thanks!As Elke explains and shows via that link, that informs you how to digitally sign a document. However a digital signature only provides non-repudiation and integrity of a document, not confidentiality. Symmetric Encryption is needed for that.
You would not use Asymmetric encryption to bulk encrypt files, it would be too slow.
Unfortunately there is no easy way to symmetrically encrypt files with the tools available in modern Windows distributions. Personally I would digitally sign the document, then use a tool like 7-Zip
to encrypt them with AES-256 and a passphrase, or to go one better than that use Symantec Encryption Desktop. Using the latter allows you to do encrypt either with a passphrase, or with
your targets PGP public key (that does of course assume they are also using PGP) so that only they can decrypt it with their private half.
Also signing an Office document (or PDF for that matter) with an internal PKI certificate is only valuable if the documents are internally distributed within the same organisation, or when the other organisation(s) trust your root CA certificate, otherwise
they will not be able to verify the signature (think of it like the error in your browser with the red X stating there is a problem with your certificate).
I'm not quite sure what your use case is, but if it's just for distributing internal documents then no problem. Otherwise you'll have to get a document signing certificate from a vendor like
GlobalSign who have a trusted root certificate which ships with most operating systems so that anyone who receives the document can verify it.
D -
Digital Signature and Encryption using IAIK
What support does Netweaver provide for Digital Signatures and Encryption. Does it use IAIK for implementing security. It will be good if somebody could give some starting points.
Welcome to SDN!!!
Starting point: http://service.sap.com/security
You can use sapcryptolib (provided by SAP) for Digital Signatures and Encryption. (Also described in the link mentioned above).
Regards
Juergen -
Configure the stamp ,Digital signature and water mark in DMS
Hi...
I want to configure the stamp ,Digital signature and water mark in for my client in DMS.
Stamp:detaiils showing doc type, doc status,who has open, doc no,version,date and time
Digital Sign:with respect to approval (system should ask user name and password while approvig)
Water mark:for the status (Draft/approved)
Can anybody guide me to do this?Please explan in details as i am doing it first time.
In addition to do this what addition system requirement is needed?
Regards,
SandipHi Sandip,
Please refer below links for required details
For Redlining Redlining
Watermark DMS Seal system watermarking solution
Hope this will answer your query.
Regards,
Deepak Kori -
If I want to make my web url line of my signature link to my web site I can do so by manually Control -clicking the line in my signature and use the link command. Is there a way to have this be the default for every signature so I no longer have to do this manually each time I add a signature?
Mike Kroesen
Kroesen Films
Seattle Freelance Final Cut Pro Editor
www.kroesenfilms.com
[email protected]Well, d*amn. Was hoping to find a solution to this problem, but I'm having the same issue.
If I highlight text in a Mail message, right click and select Link>Add, and I paste a link in, the OK button remains greyed out. Evidently this is only an issue for some links, but not others.
I can't put in this link: http://albums.phanfare.com/6886050/3509590#imageID=62009083 (even though when I paste it into a browser it works fine)
But I can put in this link: http://www.chicagotribune.com/business/chi-biz-borders-close-michigan-avenue-feb 26,0,4953534.story
Obviously, Mail isn't recognizing the first one as a valid link. I've had this happen on several occasions, so it's not just limited to the above example... -
Capturing signatures and writing invoices
i'm looking to use the iphone in the future to create invoices, capture signatures and print off, email, of remotely fax them to customers. it should also be able to link to merchant account services. perhaps even to attach a customers picture to the invoice.
can this be doneWe do this all the time on other devices. I've written signature capture tools for various WM/ WinCE/ XP/ other devices.
First, you'll need an iPhone stylus that works well for the signature.
I'd buy one of each available (Google "iphone stylus"), and try them with a web-based drawing program or a jailbroken phone with a paint program, to see which works best.
(Of course, compared to the horrible signatures that many devices capture at various stores I've been to, perhaps accuracy isn't that important - grin ) -
when trying to install update 10.5 it says the download has invalid signature and won't install. I run XP
I'm having similar problems with 10.5. I managed to install it but when I try to run itunes it doesn't open correctly and when I view my account the screen is not presented in the correct format. When I try to search for music it finds nothing. So I ran the diagnostics option but this came back with an error ' secure link to itunes failed'. It also said that the internet connection was verified but when I went into the help option it said I wasn't connected to the internet but as you can see I was and am. I've now uninstalled and reinstalled 3 times, each time I uninstall I've followed the correct sequence as recommended:-
1. Itunes
2. Quicktime
3. Apple software update
4. Apple mobile device support
5. Bonjour
6. Apple application support
I've noticed now that 'quicktime' didn't get reinstalled, not sure if that's the problem. Also when I rebooted after the last Uninstall I received a new error message ' Applesyncnotifier.exe - unable to locate component'. I've also noticed that my CPU is running at 50% according to task manager when I've got apple loaded, but it goes down to less than 20% when it's uninstalled and even goes down to 0%. Clearly, there are a number of people with similar issues and Apple need to sort it quickly. -
Outlook 2013 - How do I utilize both Signatures and Stationery? Help!
This is a bit of a weird one to describe as I've never really used stationery in Outlook so here goes.
Employees utilize BOTH the signature and stationery. A standard block of (formatted) text is used in the signature and the stationery calls on an image hosted on our website. In Outlook 2003, this is handled beautifully. The signature comes first and the
stationery (the image on the website) is appended to the end of the e-mail. This is a image strip is about 180x720.
What gives? I've never seen stationery used this way so I'm a bit lost. Maybe there's a better way of handling this altogether?Hi Adrian,
It’s quite easy, you can customize signature in Microsoft Outlook using the stationery and make it more attractive.
Via using the “Signature” feature in a Outlook
new message, users can add
stationery factors on it like fonts, font's color, images, links etc.
Note: Improve community discussions by marking the answers helpful.
Thanks
Clark Kent -
Question regarding image and links tag
Hi. Im new to podcasting and have just had my first podcast excepted on itunes.
Im using garageband.com to store my audio file and copy & pasting the address into itunes to submit it. (http://www.garageband.com/user/wabel/podcast/main.xml)
What i dont understand is adding an cd cover image and links to a web site.
I asume its sumular to html, where you type the code with link or image, but where? I cant edit within the above link!
Please help.The "code" for images and links goes into the xml file.
<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd" version="2.0">
<channel>
<ttl>60</ttl>
<title></title>
<link></link>
<language></language>
<copyright></copyright>
<itunes:subtitle></itunes:subtitle>
<itunes:author></itunes:author>
<itunes:summary></itunes:summary>
<itunes:owner>
<itunes:name>John Doe</itunes:name>
<itunes:email>[email protected]</itunes:email>
</itunes:owner>
<itunes:image href="http://example.com/podcasts/everything/AllAboutEverything.jpg" />
<itunes:category text=" ">
<itunes:category text=" "/>
</itunes:category>
<item>
<title></title>
<itunes:author></itunes:author>
<itunes:subtitle></itunes:subtitle>
<itunes:summary></itunes:summary>
<enclosure url=" " length=" " type=" " />
<guid></guid>
<pubDate></pubDate>
<itunes:duration></itunes:duration>
<itunes:keywords></itunes:keywords>
</item>
</channel
</rss>
Maybe you are looking for
-
I can no longer access sites requiring personal passwords (email, facebook, ebanking etc) that I could before. I get to the internet site okay but when I'm prompted for username and password, the computer goes no further. I work through a server netw
-
Adobe X, Windows 7 and protected mode
Hi Adobe recently installed an update for Adobe Reader X, and now it won't open in the protected mode due to a problem with the system configuration (I'm running Windows 7). Attempts to find out what's wrong won't open, and if I select "protected mo
-
Hi, We are facing a weird problem in the portal for a webdynpro ABAP application. When the user clicks on the applcation link in portal multiple times there is timeout error or a short dump for assert condition failed. This dump is triggered from the
-
Invoice simulation using a java connector
Hello, I am trying to post/simulate a vendor invoice in B1 system from a java application(connected through a JCO). I know this is possible with R/3, but not sure with B1. Does B1 has functionality to simulate a document similar to simulation in
-
Wow... Talk about frustrating. Every time I start Dreamweaver, within a few minutes, I get an error (I believe the error is java or spry related) when using random menu items. Afterwards, shortcut keys no longer work. This makes doing anything insane