Significance of BC Set Activation for GRC AC 5.3

Dear Members,
Request you to please help me understand the significance of the BC Set Activation in an HR implemented ABAP system,
w.r.t. AC 5.3
The AC 5.3 runs separately on the a java instance and connected to ABAP with the help of JCo's.
Kindly assist, if you have any clue regarding the documentation for the same.
I want to understand, the criticality of activating the VIRSANH and VIRSAHR BC Sets on ABAP side for the proper functioning of the GRC AC 5.3 and if their is any variation in the results of GRC , if the BC Sets are activated/ or if not activated.
Many Thanks !
Regards,
Edited by: Molwana Lokisang on Feb 2, 2010 11:02 AM

Molwana,
the BC Set needs to be activated as part of the post-installation process. It will also provide you with data that the RTA needs to work.
I have done this for many customers, there is no risk involved. All the "extra" data is in a separate namespace.
Frank.

Similar Messages

BC sets activation for GRC 10.0 Risk Management

Hi ,
I am new to Risk management,please suggest the required list of BC set for activation.
Thanks in advance,
Varun

Hi Varun ,
Apart from the common BC sets , You also need to activate RM Specific BC sets.
You can find the list in Installation Guide " SAP Access Control, SAP Process Control, and SAP Risk Management 10.0/10.1"
( https://websmp108.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000718172 )
Here is the list for your quick reference:
BC_SET_ANALYSIS_PROFILE
BC-SET_ACTIVITY_TYPES
BC_SET_BENEFIT_CATEGORY
BC_SET_DEFINE_CATEGORIES_POWL
BC_SET_DEFINE_THREE_POINT_ANALYS
BC_SET_DRIVER_CATEGORY
BC_SET_IMPACT_CATEGORY
BC_SET_IMPACT_LEVEL
BC-SET_INFLUENCE_STRENGTH
BC_SET_MAINTAIN_DEFAULT_QUERY
BC-SET_MAINTAIN_OPP_RESP_TYPES
BC_SET_MAINTAIN_USER_RESP
BC_SET_OBJECTIVE_CATEGORIES
BC_SET_PROBABILITY_LEVEL_ID
BC_SET_PROBABILITY_LEVEL_MATRIX
BC-SET_RESPONSE_EFFECTIVENESS
BC-SET_RESPONSE_TYPE
BC_SET_RISK_APETITE
BC_SET_RISK_LEVEL
BC_SET_RISK_LEVEL_MATRIX
BC_SET_RISK_PRIORITY_MATRIX
BC_SET_ROLES
BC_SET_SPEED_OF_ONSET
BC-SET_LOSS_MATRIX_COLORS
BC_SET_UNIT_MEASURE
BC-SET_RISK_RESPONSE_TYPE
BCSET-GRRM-GRFNV_POLICYTYPE
BCSET-GRRM-GRRMVPOLICYRESP
BCSET-GRRM-GRFNV_POLICYTYPE
BCSET-GRRM-GRRMVPOLICYRESP
Thanks & Regards
Uma Shankar T

Zero suppression is set active for rows & columns - but find empty rows

hi,
In the query properties i set zero suppression active for all rows and columns, but in the workbook, when i execute the report i still find empty rows. i refreshed the query from the workbook, and have done everything, but still i find empty rows.
Can anyone help me in this regard?
thanks,
rani

Hi,
you found empty rows in WorkBook, what about the Query Output ?
please check the below:
Re: Suppressing result rows when KF values are zero?
Hope this helps you
Regards
ReddY A

How to set activity type for a cost center

i was practicing the split valuation topic and for the that i was making a routing for a product so that i can have that product for inhouse production.
while using ca01(to create routing), i am facing a problem with the activity type.
when i am setting up the operation i am getting an error " activity type # is not set up for cost center 10004220 in year 2007"
can you please tell me how should i come out of it.
thankyou very much

hi Nandha, i am sorry but i could not do it. i am new in this. let me make my problem more clear to you.
i was creating a routing using ca01
after puttig all the details i switched to operations tab and in operation tab i put workcenter as (1111 - lathe, may be i am wrong as i told you i am just practicing).
i did not put anything on that screen and then when i pressed enter it took me to another screen with name Operation check.
here is the layout of the problem on that screen
                      std val      unit     activity type     efficiency
set up                            min        1422
machine                         min        1421
labor                              min        1420
and then curser being on the std value i am getting this error "activity type 1422 is not set up for cost center 1000 4220 in the year 2007.when i am ignoring it it is switching to next std val coloumn and the same error.
thankyou for your time

Activity Type ENGINE not set up for cost center

Hi all,
Currently, we have set up a work center in our system, which has the following intergration:
- Controlling Area --> TECH
- Cost Center --> TECH001
- Activity Type --> ENGINE
- Plant --> PN01
- Work Center --> PL01
Based on the above, the work center PL01 has the relationship of where Activity Type ENGINE and Cost Center TECH001 are linked together, where Cost Center is tied to Controlling Area TECH.
However, when a user tried to create General Task List (Trxn IA05), under Work Center PL01 and Plant PN01, and inserted Activity Type ENGINE in Operation item. It gives the following error:
Activity Type ENGINE not set up for cost center
I have also checked KP26 that everything is setup correctly.
Please can someone shed some light on the above?
Many thanks and regards,
Patrick
PS: Full point guaranteed for helpful answer.

Hi all,
I have solved the issue by changing the Start Date of the Work Center. Now everything works well.
cheers,
Patrick

Activity Type set up for cost center

Hi All ,
While creating a task list i m getting a message
Activity type is not set up for cost center in the year 2008
Message no. CR062
How could i set the activity type for cost center? Plz tell the procedure.
regards
sunil
Edited by: sunil gupta on Sep 19, 2008 10:12 AM

Dear Sunil,
Check out this,
1.Create a Cost center using T code - KS01.
2.Create an activity type using T code - KL01.
3.Assign the Rates for an activity type & cost center combination using T code KP26.
4.In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal
Year as 2008,enter the cost center, activity type click on overview screen (F5)---> enter the per hour Rate
under Fixed price and set value as 2 for distribution key and plan price indicator as 3.
5.After performing this ,while creating the work center ,this combination of activity type & cost center
should be assigned.Then while creating routing/task list this work center can assigned for performing
operations.
Check with this & revert back if you need any further help.
Regards
Mangalraj.S

Trying to do a password update but it asks me for a four digit pass code. Does anyone know if that would have been a significant date or set of letters or numbers I was prompt for in the past when I first bought my phone? Thanks.

Trying to do a password update but it asks me for a four digit pass code. Does anyone know if that would have been a significant date or set of letters or numbers I was prompt for in the past when I first bought my phone? Thanks.

It rather depends on where you are seeing the demand for a passcode. If, as I assumed, you are trying to change the password at http://appleid/apple.com then that will ask for a passcode if 2-step verification has been set up. On the other hand, if, as Csound1 has assumed, you have changed the password on that website and are trying to enter it in your phone (for which you need to sign out completely before you can do this) and are being asked for a passcode that can only be one you set yourself (unless of course the phone is second-hand in which case that would open a whole new can of worms).

GRC role set documents for auditors

Hi,
We have installed GRC5.2 and Iam looking for GRC rule set documents.I could not find in service market place, what i found was Installation/config/migration which was not helping me anymore.
Can some one guide me hwere to find GRC rule set docs?
Appriciate if you can help
- Lisa

Hello Lisa,
You are welcome.
1. I would not say it would be exactly a document that you would get from GRC server but you can create a saparate login for the auditor when he comes to review your system, much like you do in SAP R/3 and he can see from there what information he wants to get out of your system. There are change histories and request histories in the tool itself which he can explore to get what you wanted to create a document for.
2. Regarding the post installation steps, I would advise you to go through te documentation for the same which is available on the SAP portal. It differs from installation to installation and would be not possible to explain it all here in the forum as it has many aspects to it. Also, the guide has step by step explanation for various tasks, none of which should ideally be missed or skipped for an efficient implementation, which can be the case otherwise if you just take a note of the points only based on forum posts.
3. Not sure of the program for training, though SAP does not have the certification for the GRC AC till date for sure, as I had enquired in the SAP TechED 2008. Or maybe you can drop a mail to the trainings department with SAP to check the same and get the sure info, which we would like if you could share with us too.
Thanks.
Regards,
Hersh.

Activating Business set function for Campus management

Hello All,
I am trying to activate the business set function for Campus management but ending up in error
Invalid Status
Business function FICAX is not in target business function set
We are in Ehp4 and its IDES system. Do i miss any settings / configurations
Regards,
Anand

Hello Tina,
Kindly regret for delay in reply and I have sent you the mail.
Regards,
Anand

One Step Workflow Activation for Shopping cart in SRM 7.0

Dear Experts,
On working to EXtended Classic Scenario, I need to configure one step approval for shopping cart in SRM 7.0.
Currently it is providing me Auto Approval by default and based on it PO is being created. I need one-level manager approval shopping cart.
I am working in Demo System of Extended Classic Scenario, I need only one step approval SC without any condition.
Kindly tell me the configuration steps in SRM and please tell me one more thing is there any need of BADI or other coding for one-step approval?
Thanks in Advance,
Regards
Pawan Keshwani
Edited by: pawankeshwani on May 25, 2011 6:22 PM

Hi Ashutosh,
Thanks for quick reply.
As per your comment when i am tring to activate /SAPSRM/C_SC_600_001_SP04 by t-code SCPR20, But It shows me a information pop up Maintain the client role and then Activation is Cancelled.
Kindly tell me what i am missing or any other prerequisite step to do for this BC Set Activation.
Thanks
Pawan Keshwani

[SOLVED] "Server is already active for display 0" in Terminals

So far, my searches haven't yielded any solutions to this.
When my system starts, it boots to a console login prompt (no gdm, etc...) and I have 'startx' in my .bashrc to start my desktop. The desktop starts and functions fine (or so it seems).
Problem 1: Anytime I open a Terminal window (or open new tabs inside a Terminal) I am greeted with the following:
Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again.
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
xinit: Server error.
Sometimes the last line is:
xinit: unexpected signal 2
Usually I just ^C to get a working prompt and go about my business, but this is getting really annoying.
Problem 2: I use Guake terminal and have it set to autostart in my .bashrc, but it doesn't work until I manually open a Terminal window. And if I close that (manually opened) window, Guake stops working. If I open another one manually, it works again...etc. I have a hunch this is related to the first problem.
Any nudges in the right direction would be appreciated.
My environment:
DE = Xfce4
Kernel = 2.6.31-ARCH
Xorg = xorg-server 1.7.3.901-1
Video = xf86-video-ati 6.12.99.git20091014-1
/etc/X11/xorg.conf:
Section "ServerFlags"
Option "AutoAddDevices" "True"
Endsection
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "dri2"
Load "dbe"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 340 190 # mm
Identifier "Monitor0"
VendorName "AUO"
ModelName "10ec"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "CustomEDID" # [<str>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" "True" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RS780M/RS780MN [Radeon HD 3200 Graphics]"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
/var/log/Xorg.0.log (filtered through grep for (WW) and (EE)):
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
(EE) RADEON(0): Acceleration initialization failed
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(WW) RADEON(0): LVDS Info:
(WW) RADEON(0): Direct rendering disabled
~/.xsession-errors:
/etc/gdm/Xsession: Beginning session setup...
/etc/gdm/Xsession: ssh-agent not found!
/etc/gdm/Xsession: Setup done, will execute: gnome-session
gnome-session[28618]: WARNING: Could not parse desktop file /home/jon/.config/autostart/xfce4-tips-autostart.desktop: Key file does not have key 'Name'
gnome-session[28618]: WARNING: could not read /home/jon/.config/autostart/xfce4-tips-autostart.desktop
gnome-session[28618]: WARNING: Could not parse desktop file /home/jon/.config/autostart/xfce4-settings-helper-autostart.desktop: Key file does not have key 'Name'
gnome-session[28618]: WARNING: could not read /home/jon/.config/autostart/xfce4-settings-helper-autostart.desktop
gnome-session[28618]: EggSMClient-WARNING: Invalid Version string '0.9.4' in /home/jon/.config/autostart/wicd.desktop
gnome-session[28618]: WARNING: Unable to find provider 'metacity' of required component 'windowmanager'
gnome-session[28618]: WARNING: Unable to find provider 'nautilus' of required component 'filemanager'
GNOME_KEYRING_SOCKET=/tmp/keyring-6lpdg3/socket
SSH_AUTH_SOCK=/tmp/keyring-6lpdg3/socket.ssh
(gnome-panel:28681): Gtk-CRITICAL **: gtk_accelerator_parse: assertion `accelerator != NULL' failed
** (gnome-panel:28681): WARNING **: Unable to parse mouse modifier '(null)'
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Can't locate XML/Parser.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.10.1 /usr/share/perl5/site_perl/5.10.1 /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl /usr/lib/perl5/current /usr/lib/perl5/site_perl/current .) at /usr/lib/xfce4/xfconf-migration/xfconf-migration-4.6.pl line 20.
BEGIN failed--compilation aborted at /usr/lib/xfce4/xfconf-migration/xfconf-migration-4.6.pl line 20.
(polkit-gnome-authentication-agent-1:28707): GLib-GObject-WARNING **: cannot register existing type `_PolkitError'
(polkit-gnome-authentication-agent-1:28707): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Unable to open desktop file epiphany.desktop for panel launcher
Unable to open desktop file evolution.desktop for panel launcher
/usr/lib/python2.6/site-packages/wicd/gui.py:151: GtkWarning: gtk_toolbar_set_icon_size: assertion `icon_size != GTK_ICON_SIZE_INVALID' failed
self.wTree = gtk.glade.XML(gladefile)
ERROR:dbus.proxies:Introspect error on :1.70:/org/wicd/daemon: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
ERROR:dbus.proxies:Introspect error on :1.70:/org/wicd/daemon: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
ERROR:dbus.proxies:Introspect error on :1.70:/org/wicd/daemon: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
Importing pynotify failed, notifications disabled.
Has notifications support False
Loading...
Connecting to daemon...
Can't connect to the daemon, trying to start it automatically...
Connected.
warning: ignoring exception org.freedesktop.DBus.Error.ServiceUnknown: The name :1.70 was not provided by any .service files
warning: ignoring exception org.freedesktop.DBus.Error.ServiceUnknown: The name :1.70 was not provided by any .service files
Importing pynotify failed, notifications disabled.
Has notifications support False
Loading...
Connecting to daemon...
Can't connect to the daemon, trying to start it automatically...
Connected.
warning: ignoring exception org.freedesktop.DBus.Error.ServiceUnknown: The name :1.70 was not provided by any .service files
(firefox:30931): GLib-WARNING **: g_set_prgname() called multiple times
Registering '@mozilla.org/module-loader/python;1' (libpyloader.so)
Registering '@mozilla.org/network/protocol/about;1?what=python' (pyabout.py)
(Terminal:32576): Terminal-WARNING **: Unable to load terminal preferences.
(firefox:1968): GLib-WARNING **: g_set_prgname() called multiple times
(Terminal:5816): Terminal-WARNING **: Unable to load terminal preferences.
(Terminal:9027): Terminal-WARNING **: Unable to load terminal preferences.
(Terminal:9027): Gtk-CRITICAL **: gtk_widget_realize: assertion `GTK_WIDGET_ANCHORED (widget) || GTK_IS_INVISIBLE (widget)' failed
(Terminal:9027): Gtk-CRITICAL **: gtk_widget_realize: assertion `GTK_WIDGET_ANCHORED (widget) || GTK_IS_INVISIBLE (widget)' failed
(Terminal:9027): Gdk-CRITICAL **: gdk_drawable_get_screen: assertion `GDK_IS_DRAWABLE (drawable)' failed
polkit-gnome-authentication-agent-1: Fatal IO error 11 (Resource temporarily unavailable) on X server :1.0.
firefox: Fatal IO error 2 (No such file or directory) on X server :1.0.
Thanks,
Munky
Last edited by munkyeetr (2010-01-13 20:26:51)

In bashrc try something like
[ -z "$DISPLAY" ] && startx && {sleep 5; DISPLAY=0:0 setsid Guake; }

How to retrieve comments from one OfficeTask activity and use them in another OfficeTask activity for Multi level Approval sequential Workflow

I'm designing a sequential site workflow using Visual Studio 2010 for Project Server 2010. In my case, I have following 6 stages in the workflow:
1. InitialProposal Stage
2. Approval Stage1 -- Needs approval from Approver Project Security Group Members1
3. Rejection Stage
4. Approval Stage2 -- Needs approval from Approver Project Security Group Members 2
5. Execution Stage
6. Completed Stage
Requirement is workflow should move to Approval stage2 from Approval stage1 if approved by all members of Approver Project Security Group1and it should move to Rejection Stage even if a single member rejects it.
Workflow should move from Approval Stage2 to Execution Stage if approved by all members of Approver Project Security Group2 and it should move back to Approval Stage1 on rejection by a single member of the group.
I'm using inbuilt PSWApproval content type and OfficeTask activity for creating approval task for the group members at both stages.
On task rejected in Approval stage2, task will be assigned again to Approval Stage1 and I want to show comments given by members of Approver Project Security Group2 to the members of Approver Project Security Group1 with this assigned task
but I'm not able to retrieve comments from officeTask activity.
My question is where exactly these comments are saved? how can we retrieve them and use them in another officetask activity? If this is not possible then what is the possible solution for meeting above mentioned business requirement?

Hi Paul,
Thanks for your suggestion.
By comments field I'm assuming OfficeTask.Comments field. Problem is, this field is always null. I tried accessing this field in CheckExitCondition activity as well as in OnTaskCompleted but in both the cases, it was null only(I wrote comments while approving
the task).
I used a code activity within OnTaskCompleted activity and following code for accessing Comments and Description fields:
public string officeComments;
public string officeDescription;
private void TaskCOmplete(object sender, EventArgs e)
CodeActivity Sender = (CodeActivity)sender;
Microsoft.Office.Workflow.Actions.OfficeTask ofctask1 = ((CompositeActivity)Sender.Parent).Parent as Microsoft.Office.Workflow.Actions.OfficeTask;
officeComments = ofctask1.Comments;
officeDescription = ofctask1.Description;
Please tell me if I'm doing anything wrong here, I'm very new to Workflows. Also, do I need to set any specific property of officeTask for retriving comments?
Thank you

How to tell if REQ1 is set active high

Hi I am using the 6533 PCI-DIO-32HS card in a PC with traditional DAQ, looking at an existing design. I could not find how to tell if REQ1 is set active high or low, guessing it would be set up in the DIO confg vi.

thanks for the additional information, yes will have to wait for the external hardware. I did have a general question about the 6533 data and control line outputs using traditional DAC. I think for this design it is set up as a pattern IO transfer using internal REQ and an internal clock set up as a VI input, (DIO START). Anyhow I am monitoring the card outputs with a logic analyzer and it looks like an 8 element array (of 8 bit integers) is being used for the data input (to the DIO WRITE VI) with the first 4 elements being written out on DIOA0-A7, DIOB0-B7, DIOC0-C7, and DIOD0-D7 followed by the last 4 elements also written out to DIOA0-A7, DIOB0-B7, DIOC0-C7, and DIOD0-D7. Anyhow it looks like the clock input to the (DIO Start VI) controls the pulse width of the data. It looks like REQ1 goes high approximately 78 microseconds before the first 32 bits are written out followed by 5 microseconds of data (with the clock set at 200k), finally followed by the second data group (5 microseconds of data). It then looks like REQ1 stays high for 2-4 ms after the second group of 32 bits is written out before going low. Anyhow if you are trying to clock this data into a storage device I would expect to see rising clock edges when both the first and second group of data appear on DIOA0-A7..DIOD0-D7. I monitored all the other control lines pclk1,2 ack1 and did not see signal levels other than 0, again I do not have the DIO card connected to anything except a logic analyzer. Would you know if it is typical to use REQ1 as a clock input to a storage device or if this can be done?

Company code set up for TEM

Hi,
How we set up the company code for training event management ? Currently one company code is activated for TEM , business want all company code need to be activated for TEM. Please suggest .
Regards Yogesh

Mr. Naren,
This is not a reply from an expert. I am practicing in IDES on my own in my house. I try to do all things in configuration on my own with the available study material.
Whenever I get any error first I try myself whether it takes 2/3 days to get it resolved. Then I go to Google for further search help. Finally I go to SCN.
Thanks & regards,
Supriyo

How to set View for Completed items inside Tasks?

How to set button for 'View' and see Completed items or not completed inside Tasks?

Hi,
You want to set custom views for Tasks folder so that when we click a view button, it will show all Completed or incomplete tasks, am I correct?
Which version of Outlook are you using? There are existing views for completed/incomplete tasks in Outlook. In Outlook 2010 and Outlook 2013, we can find the buttons under View tab > Change View. Click Completed button to view all completed
tasks; Click Active button to view incomplete tasks.
In Outlook 2007, just click View > Current View to switch between different views.
If I've misunderstood something, please feel free to let me know.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Significance of BC Set Activation for GRC AC 5.3

Similar Messages

Maybe you are looking for