Significance of release creation profile

Hi all,
Can anyone explain with example the use and significance of release creation profiles in outline aggrement
Thnks
Gan

Hi,
Release Creation Profile
Use: -
The creation profile determines:
- Which event triggers the creation of a scheduling agreement release (changes involving the lines of the overall schedule and/or the reaching of the next transmission date)
- How the delivery dates are shown (aggregation and release horizon)
- Whether
Backlogs and Immediate Requirements are determined and shown in the scheduling agreement (SA) release Whether a tolerance check is carried out for SA releases that are created due to changes to the overall delivery schedule in the system
Note: -
The tolerance check is only carried out if lines of the overall schedule for an item have been changed and if you create SA releases using the release creation program (via Scheduling agreement ® Create SA release).
Features: -
A creation profile is defined on a plant-dependent basis and consists of the following areas:
General parameters: -
- Whether - and, if so, under what conditions - an SA release is generated (creation strategy).
- Whether backlogs and immediate requirements are to be determined for the SA release type.
- Whether or not the tolerance check is to be deactivated in the case of change documents created for SA releases with backlogs.
Aggregation horizons: -
- The Release Horizon for which released quantities are shown, and
- The periods for which quantities may be aggregated.
If your creation profile provides for aggregation, quantities and delivery dates set out in the lines of the overall delivery schedule stored in the system for a scheduling agreement are aggregated to form release schedule lines.
If you use a creation profile without aggregation, or work without a creation profile, the schedule lines of the SA release correspond to the schedule lines of the overall delivery schedule for the scheduling agreement for the relevant period.
Creation periodicity: -
- Whether SA releases are to be created on a periodic basis (and, if so, at which frequency).
Each time a scheduling agreement release is created, the system calculates the next creation date. Weekly and monthly releases are always created on a Monday (first workday of the period). The system takes the factory calendar as the basis for calculating the due dates for release creation.
If you wish to create SA releases on a periodic basis, you should choose a creation strategy that includes Next date.
Tolerance profile: -
- Whether tolerances are are to be checked for scheduling agreement releases created as a result of changes to the overall delivery schedule. This allows you to specify that SA releases are only to be created following major changes to the overall delivery schedule.
In the case of SA releases containing backlogs or immediate requirements, the system never checks tolerances.
Activities: -
You process creation profiles in Customizing for Purchasing under Scheduling Agreement ® Maintain Release Creation Profile for Scheduling Agreement with Release Documentation.
You assign a creation profile to a scheduling agreement item in the Additional data.

Similar Messages

Purpose and use of release creation profile

Hi all,
Can anyone explain with example the use and significance of release creation profiles in outline aggrement
with examples
Thnks
Gan

Definition: release creation profile
An instrument used to determine the period in which releases (types of delivery schedule) are generated against a scheduling agreement and transmitted to the vendor.
The creation profile controls the creation periodicity of the releases, the aggregation of scheduled quantities starting from the day after release creation, and the implementation of a tolerance check to ensure that releases are only created in the case of major changes to the overall delivery schedule in the system.
Example
A release creation profile for a scheduling agreement for which delivery schedule lines have been entered over several years specifies that releases are transmitted weekly from 01.01 to 12.31 of the first year. The release quantities are to be aggregated as follows:
For a period of 10 days starting from the current date of release creation: no aggregation. From the tenth to the thirtieth day: on a daily basis. From the thirtieth day to the sixtieth day: on a monthly basis.
regards
kunal

Where is the field release creation profile in scheduling agreement?

Dear experts,
I need to maintain release creation profile in Scheduling Agreement.
please let me know where can I find this field in ME31L
Regards,
Shashidhar

Found in More functions - Item details

Release creation profile

Hi,
Is there any other parameter (other than release aggregation of release creation profile) that influence FRC schedule ?
I have a SA with FRC schedule aggregation crieteria as 40 days daily and 370 days monthly...but it transmits only 340 days in FRC.

Hi,
Are you using Scheduling Agreement LPA Type.Because only then while creating SA you enter the Release creation profile.
Release Creation Profile
Controls:
The creation periodicity of the releases (scheduling agreement delivery schedules), i.e. the period in which releases against a scheduling agreement are created and transmitted to the vendor, and
The way in which the quantities transmitted to the vendor are aggregated (starting from the current creation date of the release)
Example:
The creation periodicity for a scheduling agreement for which delivery schedule lines have been maintained over two years provides that releases are created weekly from 1.1. to 12.31 of the first year.
The release quantities are to be aggregated as follows:
For a period of 10 days starting from the current date of release creation, no aggregation; from the tenth to the thirtieth day, on a daily basis; and from the thirtieth day to the sixtieth day, on a monthly basis.
Regards
Arun

Schedule line Release with help of release creation profile.

Hello,
Is it possible to create the schedule line release for scehule line automaticaly by heuristcs run with the help of release creation profile of external procurement relationship ?
We can release the schedule line in product view.
What is other way release the schedule line?

Hi,
Credit check is done to see if the customer has crossed his credit limit or not. Incase you want to forcefully release order we use [VKM1]. What is this got to do with the schedule lines??? Irrespective of whether the order is under credit hold or no the schedule line are determined the same way. Didnt understand the connection.
Regards
Nadarajah Pratheb

Re how to activate release creation profil

Dear Sap experts,
please advise me how to activate release creation profile as i have already trasanction code
OMSG but in which vendor gorup we have to go...
Thanks
Mohit

You need to select 0001- vendor.
To activate in ht e vendor master goto - purchasing view-extras-
give the plant, check data retention at plant level, SAVE
Now again goto purchasing view, extrasÃ alternate data,for a plant
In default material data, u find this Release creation profile

Assigning Creation Profile in the Vendor Master

Help needed to find the release "Creation Profile" in the Vendor Master. I am not able to locate the input box in the Vendor Master "Purchasing Data" Tab.
Already tried:
Extras >> additional purchasing data >> data retention at plant level
Purchasing view >> Extras >> Alternate data for a plant
- the "Creation profile parameter is not there
Any help is appreciated.

Thanks for your reply. I should clarify the issue once again.
Problem Clarified
"Release Creation Profile" already exists (defined) in IMG and I need to assign it to a vendor in the Vendor Master on the "Dif. Purchase Data" which is plant specific. I couldn't find the field "Creation Profile" in any of the purchasing data.

How to create Creation Profile

Hello all Gurus,
Can someone please tell me how to create "Creation Profile" and use them in MM scheduling agreement? I have an issue, where the user wants 2 separate creation profiles to be created so that the demands should be sent to suppliers on Thursdays and Fridays only. I maintained the creation profiles in SPRO -- MM -- Purchasing -- Scheduling Agreement -- Maintain Creation Profile for Scheduling agreement with rel. doc. But these creation profiles doesn't seems to work. What are the extra steps that we need to carry out once the creation profiles are created and then maintained in MM scheduling agreement?
If you have any knowledge on creation of CREATION PROFILES please share it with me. It will be very much helpful for me.
Thanks and Regards,
Umakanth

hi,
Go to SPRO > MM > Purchasing > Scheduling Agreement > Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu.
Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu.
In this step, you can define the release creation profile.
The latter is an instrument for determining which criteria are used to generate releases against a scheduling agreement and transmit them to the vendor.
You assign the creation profile to the scheduling agreement item in the additional data.
The creation profile controls the creation periodicity of the releases and - starting from the current date of release creation - the way in which the quantities are aggregated.
In the release creation profile, you can define
o   General Parameters
-   Which creation strategy is the basis for JIT delivery schedules and scheduling agreements.
-   How backlog and immediate requirements are taken into account during release creation.
o   Aggregation and release horizon
-   If and how schedule lines should be aggregated during release creation.
o   Release creation periodicity
-    With which periodicity scheduling agreement releases are created
o   Tolerance profile
-    That for releases created as a result of changed schedule lines, the system performs a tolerance check
o   Internet release
-    Whether an Internet release is created during release creation

Creation profile with required parameters

Please can anyone tell me how to create the new creation profile with the following parameters: Delivery on Thursday and creation on Wednesday.

Hi,
Settings for the Creation Profile
You make the following settings in Customizing for Purchasing under Scheduling Agreement ® Maintain Release Creation Profile for Scheduling Agreement with Release Documentation.
General Parameters
For JIT delivery schedules, you select Changed or next date. For forecast (FRC) delivery schedules, you select Next date only.
For JIT schedules, you specify that backlogs and immediate requirements are determined.
Aggregation Horizons
For JIT schedules, you specify daily aggregation and enter 10 workdays as End. For FRC schedules, you choose monthly aggregation and enter 180 workdays as End.
This has the effect that JIT delivery schedules show the daily quantities for the next 10 workdays and FRC schedules the monthly quantities for the next 180 workdays (9 months à 20 workdays).
Creation Periodicity
You specify weekly creation for JIT schedules and monthly creation for FRC schedules.
Tolerance Profile
You specify 10 days as the checking period for JIT schedules, since this corresponds to the release horizon. You enter 5% as upper and lower tolerance limits and choose Overall check.
In your case JIT SCHEDULE IS VALID. I hope this will clear your issue.

Creation profile .....scheduling agreement

hello
i have created scheduling agreement and then created release me84(release type: forecast and JIT schedules)
now where can i create "creation profile " to control this release ,
please help me to understand this process
thanks

Go to SPRO---> Materials management---> sch. agreement. -
> maintain Release creation profile.
here you need to maintain the time horizons for JIT & forecast.
Thanks & regards
Madhu

Creation profile with weekly aggregation

Hello amigos!!
I created a creation profile for foreign suppliers by doing weekly aggregations.
I have the following problem... for de deliveries from today to the future the print layout show the aggregation weekly (weekly format), that is fine.
But the deliveries in the past the print layout show them with day format. And is also required in Week format.
what I missed? what I need to do to fix it=

Hi,
Settings for the Creation Profile
You make the following settings in Customizing for Purchasing under Scheduling Agreement ® Maintain Release Creation Profile for Scheduling Agreement with Release Documentation.
General Parameters
For JIT delivery schedules, you select Changed or next date. For forecast (FRC) delivery schedules, you select Next date only.
For JIT schedules, you specify that backlogs and immediate requirements are determined.
Aggregation Horizons
For JIT schedules, you specify daily aggregation and enter 10 workdays as End. For FRC schedules, you choose monthly aggregation and enter 180 workdays as End.
This has the effect that JIT delivery schedules show the daily quantities for the next 10 workdays and FRC schedules the monthly quantities for the next 180 workdays (9 months à 20 workdays).
Creation Periodicity
You specify weekly creation for JIT schedules and monthly creation for FRC schedules.
Tolerance Profile
You specify 10 days as the checking period for JIT schedules, since this corresponds to the release horizon. You enter 5% as upper and lower tolerance limits and choose Overall check.
In your case JIT SCHEDULE IS VALID. I hope this will clear your issue.

Creation Profile In SA (Sceduling Agreement)

Hello Gurus,
How do i make the field "Release Creation Profile" of a SA mandatory.
Field name is EKPO-ABUEB.
I could not fined under as recomended by sap documentation.
Sap documentation is as follows.
"SAP recommends defining the Creation profile field as a mandatory-entry field (in Customizing for Purchasing: Scheduling Agreement ® Define Screen Layout at Document Level)"
Best Regards,
Itzik Eshed

hello,
There is no such functionality for "define screen layout"...
Release creation profiles are maintained here and shd check the settings here:
SPRO> MM-> Purchasing --> Schedule agreement --> Maint. rel. creation profile for the shc. agre w. rel. doc...
Pls check..
Hope it helps..
Regards
Priyanka.P

Creation profile for SA

All,
1.Can anyone pls tell me the path for doing creation profile for schedule agreement in SPRO?
2.Also pls explain abt creation profile?
Thanks

Path
SPRO- Material Management---Purchasing -SCheduling Agreement----Maintain Creation profile ..
Definition: release creation profile
An instrument used to determine the period in which releases (types of delivery schedule) are generated against a scheduling agreement and transmitted to the vendor.
The creation profile controls the creation periodicity of the releases, the aggregation of scheduled quantities starting from the day after release creation, and the implementation of a tolerance check to ensure that releases are only created in the case of major changes to the overall delivery schedule in the system.
Example
A release creation profile for a scheduling agreement for which delivery schedule lines have been entered over several years specifies that releases are transmitted weekly from 01.01 to 12.31 of the first year. The release quantities are to be aggregated as follows:
For a period of 10 days starting from the current date of release creation: no aggregation. From the tenth to the thirtieth day: on a daily basis. From the thirtieth day to the sixtieth day: on a monthly basis.
Reward if helpful

Making creation profile filed mandatory

Hi,
I want to make creation profile (EKPO-ABUEB) field mandatory in scheduling agreement. In the screen layout setting this field does not appear. How can I set this field as mandatory field
Regards

Hi
Here is a alternative.
Release creation profile is defaulted in Scheduling agreement through vendor master record.
You can make release creation profile mandatory for the account group.
In this case system will automatically default the release creation profile in SA.
Regards
Girish

The SA release doesn't go by my creation profile

Hi, I have created a release creattion profile and input it onto my sa, I set the daily aggregation 10 days, and weekly aggregation 180 days. In my understanding, if I release now, the first 10 delivery dates should be in form of date, it does. but the problem is, after 10 days, it's still in date form till the 15th days, where could be the wrong?

Hi Mallinath,
Here it is.

Significance of release creation profile

Similar Messages

Maybe you are looking for