Significansce of Installed Products while Technical System creation

hi gurus,
could you tell me what exactly Products mean while we creating Technical systems in System Landscape Directory?
What if we wrongly specified any product? (i.e. for a NetWeaver2004s if we select some other product what will be the effect?
thanks in advance,
nikhil

Hi Nikhil,
Mentioning not exactly same software components description in SLD does not have a adverse effect, however please refrain from this practice since SLD serves as a central info storage and could be misleading for your team.
regards, Shantanu

Similar Messages

No Installed Products while adding Technical System in SLD!

Hello,
I am trying to add Technical Systems in SLD. when I was at the point to select the software components, I am not seeing any installed products on the left side.
I already gave the ABAP system details in the previous screens, in this wizard.
Why is it that I am not seeing any installed products.
Thanks
Srinivas

Hi Jazz,
Here are the errors I am getting.
Import finished with 72 errors
Errors:
CIM_ERR_FAILED: CIM qualifier Alias is currently not supported by this implementation
QUALIFIER.DECLARATION Alias
CIM_ERR_FAILED: CIM qualifier BitMap is currently not supported by this implementation
QUALIFIER.DECLARATION BitMap
CIM_ERR_FAILED: CIM qualifier BitValues is currently not supported by this implementation
QUALIFIER.DECLARATION BitValues
CIM_ERR_FAILED: CIM qualifier Composition is currently not supported by this implementation
QUALIFIER.DECLARATION Composition
CIM_ERR_FAILED: CIM qualifier Counter is currently not supported by this implementation
QUALIFIER.DECLARATION Counter
CIM_ERR_FAILED: CIM qualifier Delete is currently not supported by this implementation
QUALIFIER.DECLARATION Delete
CIM_ERR_FAILED: CIM qualifier Deprecated is currently not supported by this implementation
QUALIFIER.DECLARATION Deprecated
CIM_ERR_FAILED: CIM qualifier DN is currently not supported by this implementation
QUALIFIER.DECLARATION DN
CIM_ERR_FAILED: CIM qualifier Expensive is currently not supported by this implementation
QUALIFIER.DECLARATION Expensive
CIM_ERR_FAILED: CIM qualifier Experimental is currently not supported by this implementation
QUALIFIER.DECLARATION Experimental
CIM_ERR_FAILED: CIM qualifier Gauge is currently not supported by this implementation
QUALIFIER.DECLARATION Gauge
CIM_ERR_FAILED: CIM qualifier Ifdeleted is currently not supported by this implementation
QUALIFIER.DECLARATION Ifdeleted
CIM_ERR_FAILED: CIM qualifier In is currently not supported by this implementation
QUALIFIER.DECLARATION In
CIM_ERR_FAILED: CIM qualifier Invisible is currently not supported by this implementation
QUALIFIER.DECLARATION Invisible
CIM_ERR_FAILED: CIM qualifier Large is currently not supported by this implementation
QUALIFIER.DECLARATION Large
CIM_ERR_FAILED: CIM qualifier MaxValue is currently not supported by this implementation
QUALIFIER.DECLARATION MaxValue
CIM_ERR_FAILED: CIM qualifier MinLen is currently not supported by this implementation
QUALIFIER.DECLARATION MinLen
CIM_ERR_FAILED: CIM qualifier MinValue is currently not supported by this implementation
QUALIFIER.DECLARATION MinValue
CIM_ERR_FAILED: CIM qualifier Nonlocal is currently not supported by this implementation
QUALIFIER.DECLARATION Nonlocal
CIM_ERR_FAILED: CIM qualifier NonlocalType is currently not supported by this implementation
QUALIFIER.DECLARATION NonlocalType
CIM_ERR_FAILED: CIM qualifier NullValue is currently not supported by this implementation
QUALIFIER.DECLARATION NullValue
CIM_ERR_FAILED: CIM qualifier Octetstring is currently not supported by this implementation
QUALIFIER.DECLARATION Octetstring
CIM_ERR_FAILED: CIM qualifier Out is currently not supported by this implementation
QUALIFIER.DECLARATION Out
CIM_ERR_FAILED: CIM qualifier PropertyUsage is currently not supported by this implementation
QUALIFIER.DECLARATION PropertyUsage
CIM_ERR_FAILED: CIM qualifier Provider is currently not supported by this implementation
QUALIFIER.DECLARATION Provider
CIM_ERR_FAILED: CIM qualifier Read is currently not supported by this implementation
QUALIFIER.DECLARATION Read
CIM_ERR_FAILED: CIM qualifier Schema is currently not supported by this implementation
QUALIFIER.DECLARATION Schema
CIM_ERR_FAILED: CIM qualifier Source is currently not supported by this implementation
QUALIFIER.DECLARATION Source
CIM_ERR_FAILED: CIM qualifier SourceType is currently not supported by this implementation
QUALIFIER.DECLARATION SourceType
CIM_ERR_FAILED: CIM qualifier Static is currently not supported by this implementation
QUALIFIER.DECLARATION Static
CIM_ERR_FAILED: CIM qualifier Syntax is currently not supported by this implementation
QUALIFIER.DECLARATION Syntax
CIM_ERR_FAILED: CIM qualifier SyntaxType is currently not supported by this implementation
QUALIFIER.DECLARATION SyntaxType
CIM_ERR_FAILED: CIM qualifier Terminal is currently not supported by this implementation
QUALIFIER.DECLARATION Terminal
CIM_ERR_FAILED: CIM qualifier TriggerType is currently not supported by this implementation
QUALIFIER.DECLARATION TriggerType
CIM_ERR_FAILED: CIM qualifier UnknownValues is currently not supported by this implementation
QUALIFIER.DECLARATION UnknownValues
CIM_ERR_FAILED: CIM qualifier UnsupportedValues is currently not supported by this implementation
QUALIFIER.DECLARATION UnsupportedValues
CIM_ERR_FAILED: CIM qualifier Write is currently not supported by this implementation
QUALIFIER.DECLARATION Write
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property ScheduledStartTime
CIM_Job
CIM_ERR_FAILED: Unknown qualifier Write found in property DeleteOnCompletion
CIM_JobSettingData
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_ConcreteJob: CIM_Job
CIM_ConcreteJob
CIM_ERR_FAILED: Unknown qualifier Write found in property EnabledDefault
CIM_EnabledLogicalElement
CIM_ERR_FAILED: Unknown qualifier Write found in property PrimaryOwnerName
CIM_System
CIM_ERR_FAILED: Unknown qualifier Write found in property PrimaryOwnerName
CIM_Service
CIM_ERR_FAILED: Unknown qualifier Gauge found in property AvailableSpace
CIM_FileSystem
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property array PowerManagementCapabilities
CIM_ComputerSystem
CIM_ERR_FAILED: Unknown qualifier Gauge found in property NumberOfUsers
CIM_OperatingSystem
CIM_ERR_FAILED: Unknown qualifier Gauge found in property FileSize
CIM_LogicalFile
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property PowerManagementSupported
CIM_LogicalDevice
CIM_ERR_FAILED: No such override property in superclass CIM_System: EnabledState
CIM_ApplicationSystem
CIM_ERR_FAILED: Unknown qualifier Gauge found in property WorkingSetSize
CIM_Process
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_LogicalPort: CIM_LogicalDevice
CIM_LogicalPort
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_Processor: CIM_LogicalDevice
CIM_Processor
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_NetworkAdapter: CIM_LogicalDevice
CIM_NetworkAdapter
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_NetworkPort: CIM_LogicalPort
CIM_NetworkPort
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_OSProcess
CIM_OSProcess
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_FRUIncludesProduct
CIM_FRUIncludesProduct
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_ProductParentChild
CIM_ProductParentChild
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_FileStorage
CIM_FileStorage
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class CIM_ProvidesServiceToElement
CIM_ProvidesServiceToElement
CIM_ERR_FAILED: Class CIM_OperatingSystem referenced by association CIM_RunningOS does not exist.
CIM_RunningOS
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_SystemDevice
CIM_SystemDevice
CIM_ERR_FAILED: Class CIM_OperatingSystem referenced by association CIM_BootOSFromFS does not exist.
CIM_BootOSFromFS
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property CompiledBits
SAP_BCApplicationServer
CIM_ERR_FAILED: Unknown qualifier STATIC found in property AccSldModelVersion2
SAP_ACEEngine
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class SAP_ACENetworkInterface: CIM_NetworkPort
SAP_ACENetworkInterface
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_JCODestination
SAP_JCODestination
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_MsgServJCODestination
SAP_MsgServJCODestination
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_AppServJCODestination
SAP_AppServJCODestination
CIM_ERR_FAILED: Class SAP_ACENetworkInterface referenced by association SAP_ACENetworkToNetworkInterface does not exist.
SAP_ACENetworkToNetworkInterface
CIM_ERR_FAILED: Class SAP_ACEEngine referenced by association SAP_ACEAssociatedVirtualizationManager does not exist.
SAP_ACEAssociatedVirtualizationManager
CIM_ERR_FAILED: Class SAP_ACEEngine referenced by association SAP_HostedACEEngine does not exist.
SAP_HostedACEEngine
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class SAP_ACENetworkInterfaceComponent: CIM_SystemDevice
SAP_ACENetworkInterfaceComponent

Technical system creation problem in SLD

hi
while i'm traying to create a technical system for Web As ABAP(ERP 2004 ECC 5.0) in SLD when I serch for Installed product no product with ECC 5.0 is found.
is there somthing missing ?
regards,
kinjal

HI kinjal
i think UR J2EE server patch level is SP9.
do u read the SLD configuration document carefully?
look at sap note 669669. and import the CR Content according to that. this solves ur issue.
regards,
kaushal

Technical system creation in SLD

Hi,
1. I have installed Netweaver sneak preview-java edition.
2. I am trying to create a new technical system for WebAS ABAP. We are on ECC 5.0 .
3. I have imported Cimsap.zip and content.zip successfully.
4. Now in the screen "Technical system wizard-software products and components" under "Available products" section i am not finding an entry fo ECC5.0. Here what system name should i select to proceed further.
Do i need to make any entry in host and services files, or anything else i have to do?
Regards,
Kumar.

You will probably achieve the same result if you were to use SAP R/3 4.7 Try using it instead, see if it works. I think that it will.
Regards,
Rich Heilman

Error while source system creation/Source system transport

Hi,
     In our BW implementation, the system landscape is only 2 servers. One is BW Dev, another is BW Prd. All configurations are done in BW Dev and I extracted the data from QAS for this BW Dev system.
     Since we cant create the source systems in the BW Production system, I tried to create the source system for the SAP R3 Production system in BW Dev and trying to transport this to BW Production Instance.
     I have two queries.
1. Is this way is correct for creating the Source System for BW Production system?
2. When I tried to activate the source system I am getting the following error messages. (I tested the RFC Destinations. There is no problem, I also done the configurations for logical system creation and client assignment in both the systems).
Error in source system GWPCLNT900
     Message no. RSAR502
Diagnosis
     With Remote Function Call to system GWPCLNT900 error connection closed
     (no data) ccurred.
Procedure
     Remove the cause of the error.
When tried again I got the following error message
Basic type ZSBB030 doesnt exist. EA 447
Result of the destination check: Timeout RSAR 375.
Could anyone throw some light on these errors?
Thanks in advance.
Krishna

Hi,
you need to maintain the logical systems on both R/3 and BW. You also need to set up the RFC connection with users that can log in to the other system. The R/3 system must be open for customizing in scc4.
In transaction se03 the system change options for 'Business Information Warehouse: SAP Namespace' and 'Business Information Warehouse: Customer Namespace' may need to be modifiable. I am not completely sure about this.
The last thing I will mention is that I have seen source system creation fail when the RFC-users are system users, and the source system creation worked if the RFC-users was display user while creating the source system. The RFC-users must be changed back to system user later...
Please look at best practice documents on a more step-by-step guide...
Best regards,
Christian Frier

Problem in Technical System Creation Wizard in Portal SLD

Hi
When I am trying to Create New Technical System for WEB AS ABAP, I am getting the following error at the Installed Production phase
in the Portal SLD
*CIM_ERR_FAILED: Unable to execute createInstance() request, exclusive write mode is enabled*
Please help
Regards
Soumya Dasgupta

HI ,
Thank you for spend your valuable time for my problem
But my main problem is, when i am going to http://hostname:portno/sld page,
all those are not in active mode. i mean when i am selecting any function it showing sld is not configured. please do sld configuration. sld and nwdi related users are also not there in user administration. I cant understand why sld is not configured.
coz sld is configured if , we select web as java component in installation time . i dont know web as java component is selected or not. but when i am going to http://hostname:portno/ irj/portal, it showing user , content , system administration tabs . and every thing is working fine.
IN case if i did not select web as java component in installation time, may be portal also should not be configured. But here i am able to access portal. but in case of sld , it is showing error message. what is hell with sld realted problem. Please give reply.
reply will highly appreciated. Thank you.

How do I get application manager to install products after a system restore removed them?

I had some issues starting the computer and had to use system restore to get it runnng.
But that meant that all the applications I installed using creative cloud were gone.
When I started the Application Manger, It read that all the applications that I had installed were still installed.
I don't know how to reset anything to reinstall what I lost. As you can see I says the installed programs are up to date. But they are not on the hard drive.
If anyone can help, thank you very much. Or I wait till they open tomorrow. Barry

Hi Mylenium
i did a Forum search upon AAM issues and came here.
My system and all installed CS6 Applications are running smoothly, just AAM shows some odd behaviour
Most needed applications are installed, but under the "All" Tab, AAM shows "install" on the right, see my screenshot below.
Contrary to that what is seen on the screenshot up there from user "Bar".
under "Updates" it shows all up to date (see screenshot below)
This way, I'm cannot be sure if AAM works correctly or not.
So i have followed your suggested advice and cleaned everythig up, downloaded and installed everything again, ugh!, but problem still persitis.
Usually it should show up which Applications are alredy installed, respectively are up to date and which application are still not installed.
Is there a known issue with AAM?
Thank you.

PS CS4 upgrade install hangs while checking system profile

System is a Core 2 Duo 6700 with 4GB, XP2 Pro SP3.
Installing PS CS4 upgrade over CS3.
Downloaded file unpacks OK, but when running Setup the Checking System Profile bar gets to about 90% the PS Setup window flashes up for barely a second, then the install hangs, ie no further progress with the Checking System Profile (left if for 20 mins or so).
I've downloaded and run a new CS4 upgrade file from Adobe store. No change.
I've added SP3 (was on SP2), no change.
Any one seen this or have any ideas?
Thanks!

@Ender
I've been dragging through the installer mud for CS4 ever since a sunny summer day in 2007, so I clearly know some of that stuff... ;-) And sorry to say so, it's simply not the off-screen dialog problem in most of these cases (which a look at the installer logs would very likely confirm). We can discuss this further off-list, if you feel like it, so shoot me a mail to mylenium|-|at|-|mylenium.de. I sure would like to get to know some of the Photoshop-Aliens a bit better (as someone rooted in the video, compositing and 3D world) :-D
@Mike
Simply move them all out of the way or rename them and see what happens. The installer will create the folders again if needed and if e.g. you still need to run CS3, simply renaming/moving them back to their original state will still work (as long as you don't touch any folders related to licensing or shared core functions such as Anchor Service or Linguistics). If you're not feeling adventurous, then call support, they will provide you with more detailed explanations and hold your hand ;-)
Mylenium

Reg Technical System & Business System Creation

Hi,
Am trying to create a Technical System in my SLD for my ECC6.0 installation.The System got created and my problem is when i create my Business system out of it.When i try to create a Business System am not able to do so and i get an error as below:
"No products are defined for the selected technical system
Define the installed products in theTechnical System View "
also when i try to add products am not able to do so.what could be the problem.I need solution to this very urgentlg.
Am on SAP Netweaver SP09 stack.
Can someone help me out.I want to create a Business system to use it in my XI Integration.
Regards,
Karthik

Karthik,
Is your SLD on Stand alone java or is it on dual stack? If it is on a dual stack system, login to your ECC system and register your ECC system with the SLD using RZ70.
-RK

Qn on SWCV and Technical System

Hi All,
My scenario was R/3-XI-JDBC. While creating the scenario, I figured there are no outbund interfaces listed for the Business System for R/3, though I have imported the IDOC inot IR and created all the required mapping. Hence I was not able to select the IDOC as outbound interface for Receiver Determination.
After we added our SWCV to the tech system in SLD, the issue was resolved. My doubt is if I am creating some 5 more SWCV, do I need to add them all to the R/3 tech system in SLD?
Regards,
Jai Shankar

Hello,
There is a term called Software Feature = Relationship between a S/W product & its constituent components. This association is imp in XI
It is very much necessary that you have to specify the Products installed in your technical system and its components
Regards,
Mathan.
Cheer me up with points (or) correct me if I am wrong

Technical System of Web AS ABAP

hi all,
i have following doubts when creating technical system of web as ABAP type.
1)when creating techincal system it is asking me for
' Message Port (sapmsXXX): '. what should i enter for this field and wheredo i get the details from. by default it is taking 3600 is it ok if i go ahead with 3600.
2) logical system name .it appears it is optional but should i fill this entry as well.
3) After creating the technical system. do i need to fill TMS Domain and TMS Transport Group Name. if yes how do i need to fill and and what is the use of this field.
can some one suggest me a blog for Technical System creation for web as abap type.
thanks,
raj

Hi,
you can do it automatically
check out my weblog:
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
or you can find how to do it
(in more details) in my book too:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Register technical system: Installed products

HI!
I would like to register a new technical system (SAP ECC 6.0) via
http://localhost:50000/sld --> "Technical system"
The problem I face is the point 6 "Installed products".
I cannot see and choose any installed products.
Question:
how can I solve this problem?
Thank you very much!
regards
Thom

Hi
follow steps to register TS
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/flatFILETOFLATFILE&
Use this blog to register TS
The specified item was not found.

Error While Creating Technical System for SNC

Hi There,
I am trying to create technical system for SNC in SLD, I am not able to seee SNC as a s/w component/product in the list.
when I checked the list of components in SLD, I found SNC is there under product "SCMSNC" but this product is not in the list of products.
Please help me how I can get "SCMSNC" product in the product list.
Thanks,
Nishant

Can you please explain it little bit clearly?
I think you first create product, then SWC and then try to create Technical system.
While you will create the Technical system, in the last step it will ask you for installed products.
There you can specify ur product.
Thanks,
Hetal

Problem while creating WebAS ABAP Technical System in WAS 7

Hi All,
I have installed WAS 7 and EP 7 SP9 as part of SR2 Installation. I had checked the option configure local SLD. I have to create and SLD to conenct EP to ECC 6.
When I was creating the Technical System, at the last step i found out that ECC 6 was not available in the installed products(only ECC 5 was available). So i Upgraded CR Content to SAP_CR 3.2 and CIM to 1.5.20. When I am trying to create the Technical System again I do find ECC 6.0 in the Installed Products but there are no corresponding Installed Components for ECC 6.(The same exists for ECC 5). as a result I am not able to create the Technical System as atleast one component has to be selected. I have tried re importing the CIM Model and cr content again but its not working.
When I select SLD Data Supplier in Visual Admin I get the following error message.
Error While loading service SLD Data Supplier
java.lang.ClassNotFoundException: com.sap.sldserv.vaclient.ClientManagement
Is there any solution to this. Points will be given.
Regards,
Shyam.
Message was edited by:
Shyam R Nair

hi,
use th following thread,
No products installed while adding a Technical ABAP System in the SLD.
Regards
Jayapriya

Doubt regarding creation of technical system.

Hi i am doing interface between R3 and JDBC(third party)
1)I have created one technical system(type as web as abap) for R3 and one technical system(type as third party) for JDBC.
2)but we usually download one software component in IR and we create namespace under downloaded software component(swc). we do create all objects for this interface is under this namespace.
3)when we create technical system it will ask us install product, let us say we assign a prodocut called xyzr3 for Tecnical syste(TS r3), under this we have assigned a software componet(swc) called xyzr3sw.
4) when we create technical system for third party it will ask us to installed product, should i create new product for this technical system or do i need to assign a product xyzr3 witch is already created for R3 TS(tecnical system)?
5)bcz we are using only one namespace for this interface whitch is created under xyzr3sw(sc of r3 ts, type as webase abap)
6) let us say , we have created new product and swc for third party TS, any way we are not importing this sw component in IR, bcz we have imported xyzr3sw(sc of product, ts of r3), so do i need to assign same product xyzr3(witchi is creted for R3) , xyzrsw (swc created for R3) to ts (ts of type thired party)? bcz we are importing only one swc in IR to develop the interface(one name space)
thanks,
dhanush

Hi Dhanush..
4) when we create technical system for third party it will ask us to installed product, should i create new product for this technical system or do i need to assign a product xyzr3 witch is already created for R3 TS(tecnical system)?
Yes. I think you should create new product here..
6) let us say , we have created new product and swc for third party TS, any way we are not importing this sw component in IR, bcz we have imported xyzr3sw(sc of product, ts of r3), so do i need to assign same product xyzr3(witchi is creted for R3) , xyzrsw (swc created for R3) to ts (ts of type thired party)? bcz we are
importing only one swc in IR to develop the interface(one name space)
Yes. You do not need to import new software component version created for Third party.
But I'll suggest here..since you want to use JDBC on the receiver side...you can just create Business Service ( where you do not have to specify technical details) and you can used as a receiving system. No need to create 3rd party here..
Let me know if you need more details.
Nilesh

Significansce of Installed Products while Technical System creation

Similar Messages

Maybe you are looking for