Signing in (and everything after that)
First off, hello and second off, I AM FED UP WITH SKYPE. My problem first started a few months ago when my IMs where not sending and getting the grey circle. I searched and searched on a solution and tried many including:
- restarting computer
- deleting/ re-installing skype
- windows + r, %temp%\skype, deleting folder
- windows + r, %appdata%\Skype, deleting all temporary folders, renaming username folder
After all that skype would still not only refuse to send messages, but now would not login unless I repeated every 'solution' I tried listed above. Saying that i was already signed in on my computer, which i was obviously not...
Randomly skype started working for the past few weeks, but all this BS is back again and I am EXTREMELY FRUSTRATED
If there is a REAL FIX for this issue please inform me ASAP
That happens sometimes
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
Similar Messages
-
Blue screen with cursor at boot. And everything after that.
Dear Forums,
(Please note, I'll refer to the machine as a Server, but it is only using 10.4 client; I am merely using the Sharing capabilities of such).
I have a MDD G4 that I'm using as a server. When I start it up, I get the Blue Screen with Cursor (BSwC) at boot - and it never goes past that. (Can't move the cursor either).
I have read the articles
http://docs.info.apple.com/article.html?artnum=106464
And Dr. Smoke's
http://www.thexlab.com/faqs/startupitems.html
http://www.thexlab.com/faqs/repairprocess.html
I've also tried AppleJack and clearing out caches, zapping PRAM, etc. All the standard fare.
It will boot into safe mode just fine, and it is still acting as a server just fine.
I have also tried Multiple Users (to no avail).
I tried a reinstall of Tiger, which, interestingly enough, didn't give me the option for Archive and Install and Preserve, but instead only gave me the option to Upgrade (hm, from Tiger to Tiger). While this fixed nothing, the server continued to work after this.
Then I had the bright idea to install the OS to the 2nd drive I had within. 'Surely this would work,' I thought. But alas. It did not. In fact, clean installation, new disk, (and yes, I booted from this 2nd disk), the same BSwC problem.
So, please, Dear Apple Support Discussions, let there be someone out there smarter than I (I'm really not that smart, but I do follow instructions well).
-TyHow long did you wait for the blue screen to go away? I also have a iMac G5 2GHz ALS.
My computer has been having a problem where on the first boot of the day, it it would hang in the gray screen for about 1.5 minutes and the blue screen for about 4 minutes. I thought it was permanently hung but discovered that it would eventually present the login screen. I could then login normally but none of my firewire external drives would mount. I could restart over and over and the same situation would be present.
Resetting the SMU seems to cure the problem and rebooting would be quick and all firewire drives mounted correctly. I could then reboot as many times after and normal behavior of the iMac would be repeatable.
However after having the system down for several hours and restarting it, the problem would be back.
I have now moved all my firewire drives to a powered hub and will watch over the next day or so to see if that changed anything.
Robert -
[Edit: It should be FF 3.5. I mistyped FF 3.15]
I have MAC OSX Snow Leopard. 10.6.8.
FF 3.5 [apologies; I mistyped 3.15] worked perfect with Snow Leopard. NO problems.
But '''everything''' after that, till FF 8, crashes left and right.
Facebook crashes the most within few short seconds.
And NO different language websites even open.
I read online to use Safe Mode and try. I did. No change.
I read online to reset font cache or or something using atsUtil from the Terminal. I did. Nothing.
It is super frustrating. Same problem in my wife's Mac as well.
Should I stop using FF? I heard Chrome is good.
Try any of these news paper sites:
www.prothom-alo.com
www.dailyjanakantha.com
www.Facebook.com
Even ESPN videos quit randomly. But YouTube videos are fine!
Potheek Aami.All your add-ons and plugins are up to date?
There has been a recent bug with Apples Java update:
https://bugzilla.mozilla.org/show_bug.cgi?id=700835
I have similar issues, although most of the time the browser only freezes for a short time. -
My iphone 5 suddenly died and won't turn back on even after doing the recovery procedure. Even when I put it on charge the apple sign appears for 5-7 seconds and even after that it won't turn on. Help?!?!
DFU mode an try to restore to iOS6.1.4 it will wipe out the whole device if it works but than youll kno if its a software issue if it works or ahardware issue if it dont work
-
Each time I try to start iTunes after it was closed, it wouldn’t start. I have to go to the Task Manager delete Apple Push from processes and only after that iTunes statrs again. What is wrong
Did you manage to get it working mine disappeared after I while I managed to download it but now my laptop/iTunes won't recognise my iPhone!
-
My Ipad stop working and is just showing the apple logo and right after that the ITunes logo , I connected it to my PC but it ask me to restore it. Is there any trick to do not loose all my pictures if I restore it?
Once the Device is in Recovery Mode... it is too late to save anything...
To minimise loss... after the successful Recovery... Restore from the most recent Backup...
See Restore from Backup here
http://support.apple.com/kb/ht1766 -
did anyone has that issue, if yes please help me figure it out.
Can you start Firefox in [[Safe mode]] ?
You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
there was this time that I tried to use my facetime for a long time. Then after using it, it became very hot all over from the back till front. Then when I tried to open the camera function, it only went to the part where it shows the gray spiral covers without actually going to the actual camera then it went completely black and it went to home. The camera closes on its own now and i cant use it.
1. Double-click the Home button to reveal Task Bar at bottom
2. Hold the FaceTime/Camera app down for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Re-launch the app and test
Note: If necessary close all apps in the Task Bar -
Wait for an agent with best skill and loop after that.
I want to solve the following situation:
I have three skills (A, B, C) with different skill levels for each agent. C is the "everything else topic" . The caller selects the toppic which is equivalent to the skills. Of course I want the call to be forwarded to the best skilled agent.
Let's assume the calles selects topic A and all Agents with Skilllevel > 5 for A are currently talking. I want to hold the caller for 30 seconds to wait for one of these Agents. After 30 seconds I would like to forward the call to the agent with the highest skill level A.
And of course I want to avoid the caller to wait the 30 seconds if no Agent with skilllevel > 5 is on duty.
Currently I have one CSQ for each topic and I expect a skillevel > 5 for the agents serving this CSQ.
At first I put the call in the CSQ for A and play a prompt with 30 seconds MOH, if no agent becomes available I put the call in the CSQ for C and loop the caller there. But now the best agent for C get's the call.
I appreciate any hints on that.
ChristianDon't queue in C unless there are at minimum X ready agents. You can define X as 1 to start, then play with the number to see how it affects wait times and dequeues.
select resource (csq_a) connected end queued label loop ready_in_c = get reporting stats(csq_c, ready resources) if (ready_in_c >= 1) true /* at least one person idle and ready in C select resource(csq_c) connected end queued /* oops! we just missed them. */ /* if ready_in_c was > 1, this dequeue step will not execute */ /* instead, the script jumps to the select resource step for csq_c */ /* and tries the next agent automatically. only when there are no */ /* idle and ready agents do we dequeue the caller, so that an agent */ /* servicing csq_a can take the call */ dequeue(csq_c) false /* no one available in C */ play prompt(you are important to us) call hold delay 30 call unhold goto loop -
I have just upgraded my iPad to iOS 7 and now FaceTime and iMessage will not allow me to sign in. I enter my appl I'd and password but after a few minutes I get a message to say cannot activate try network connection then try again no matter how many times you do this it will not sign in. Any thoughts ?
Thanks neiltry resetting your phone by turning it off and back on again. The servers may still be having a hard time keeping up, so you may just need to wait a little while and try again.
-
Oracle form is slow when first login and normal after that
My Query is that one screen when queried is very slow on first login and normal with same query afterwards.What can be the cause.Forms 10g on Linux,Database 10g
I had raised this issue to Oracle. It is now considered as bug:
BUG 13005659 - PSR:PERF:BIP:POOR PERF ACCESSING CATALOG FOLDER IN BIP 11G WITH SECURITY ENABLED
The notes:
1373204.1: BI Publisher: Navigation in catalog folders is slow after enabling catalog file system security
And the fix is now included in one-off patch for October 2011:
Patch 13042018 -
I uninstalled my iTines and re-installed on my Fujitsu laptop.When I went to synch, I was unable tosynch my iPod to my iTunes. In addtion,I am unable to put my iTunes library of 100s of songs back onto my iTunes or iPod.I have lost all my compilations and my playlists.
Hey bryce255,
Thanks for the question, that definitely sounds frustrating. Luckily, we have steps available that may be able to restore your previous library:
No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
Resolution
1. Quit iTunes.
2. Download and install the latest version of iTunes.
3. Use the Finder (Mac) or Windows Explorer (Windows) to go to the iTunes folder that contains the iTunes library files:
Mac OS X
/Users/username/Music/iTunes/
Microsoft Windows Windows XP and Windows 2000
\Documents and Settings\username\My Documents\My Music\iTunes\
Microsoft Windows Windows Vista and Windows 7
\Users\username\Music\iTunes\
4. Drag the iTunes Library file from the above location to the Desktop.
5. Open the Previous iTunes Libraries folder in the iTunes folder.
6. Locate the file named iTunes Library YYYY-MM-DD where YYYY-MM-DD is the date you upgraded iTunes (Year-Month-Day).
7. Drag this file to the iTunes folder (the enclosing folder).
8. Rename this file to iTunes Library.
9. Open iTunes.
You should now see your missing content in iTunes.
If the above does not resolve your issue, you can learn about re-creating your iTunes library:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Thanks,
Matt M. -
Just synced to mac book pro and then after that my apps will not open what to do?
I synced to my Mac book pro which is only six months old and then once i finshed that and exited i tried to open my apps on iphone4 and none of the apps i have downloaded work the original apple ones do but none of my other ones...
how do i fix this problem without having to restore and install all the apps again...
thanksTry downloading another app on your iPhone.
If that doesn't take care of it, try the suggestions in this Apple article -> iOS: Troubleshooting applications purchased from the App Store -
I'm not sure what happened. iPhoto has always worked fine before. It was open when my kids were fooling around in Photobooth, and ever since then, whenever I try to open it, it just spins in the slideshow screen. Even if I plug in my camera, and it used to open iPhoto automatically and download, it doesn't anymore. HELP!
Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101. -
Signed applet and HTML parameters
I've created a signed applet and everything works fine, except for the fact that i can't add parameters to the applet.
Without the parameters in the HTML the applet inits and starts and can be used without problems. But when I add paramaters, the applet reports a "class not found exception".
I used HTML-converter to convert the applet tag to object/embed tags.
Has anyone had the same problem or knows what I'm doing wrong? I'd really appreciate some help.
Thanks in advance,
Erik
My HTML source:
<OBJECT classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
WIDTH = "600" HEIGHT = "400" codebase="http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0">
<PARAM NAME = CODE VALUE = "TNA" >
<PARAM NAME = ARCHIVE VALUE = "TNA.jar" >
<PARAM NAME="type" VALUE="application/x-java-applet;version=1.3.0">
<PARAM NAME="scriptable" VALUE="false">
<COMMENT>
<EMBED type="application/x-java-applet;version=1.3.0" CODE = "TNA" ARCHIVE = "tna.jar" WIDTH = "600" HEIGHT = "400" scriptable=false pluginspage="http://java.sun.com/products/plugin/1.3/plugin-install.html"><NOEMBED></COMMENT>
</NOEMBED></EMBED>
</OBJECT>
<!--
<APPLET CODE = "TNA" ARCHIVE = "tna.jar" WIDTH = "600" HEIGHT = "400">
</APPLET>
-->Try this:
OBJECT classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
WIDTH = "600" HEIGHT = "400" codebase="http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0">
<PARAM NAME = "java_code" VALUE = "TNA.class" >
<PARAM NAME = "java_archive" VALUE = "TNA.jar" >
<PARAM NAME = "java_type" VALUE="application/x-java-applet;version=1.3.1">
<PARAM NAME="scriptable" VALUE="false">
<COMMENT>
<EMBED type="application/x-java-applet;version=1.3.0" CODE = "TNA" ARCHIVE = "tna.jar" WIDTH = "600" HEIGHT = "400" scriptable=false pluginspage="http://java.sun.com/products/plugin/1.3/plugin-install.html"><NOEMBED></COMMENT>
</NOEMBED></EMBED>
</OBJECT>
<!--
<APPLET CODE = "TNA" ARCHIVE = "tna.jar" WIDTH = "600" HEIGHT = "400">
</APPLET>
Maybe you are looking for
-
How Can I delete multiple messages from the same address in Mac Mail
Hope this is in the correct Community. Hope someone can help me to delete multiple email messages from the same email address. At the moment I can do it by holding down the Command key and highlighting each email, but that can be difficult with many
-
Would like to move iPod touch files to my new Windows 8 computer -- but can not see hidden files
Would like to move iPod touch files to my new Windows 8 computer -- read on how to do this, but this involves being able to see the hidden fiels -- but can not see hidden files...any suggestions. Would like to transfer these files from iPod Touch to
-
OBIEE 11g pivot dumb question - changing order of measure columns
Hi, dumb question, in OBIEE 11g, if using a table view it is easy for end users to drag and drop the measure columns in any order desired. Is there a way for end users to change the order of measures when using a pivot view? Thanks, Scott
-
How do you make the strip silence window larger!!
How can I adjust the strip silence window to make the wave files larger so I can see my adjustments better.... Right now they're so small I can't tell what I'm doing.. Thanks RD
-
Power input specs for the zen x
i need to know the power input specs for the zen xtra, since i need to buy a new charger ASAP. Can anyone help me?