Signing in to get started
i registered my printer now when i go to sign in it says invalid email address but i hav recieved nconfirmation thru my email. what should i do?
I will need a little more information in order to help out. What printer do you own? Different printers have different troubleshooting steps to take to fix their issues. The best way to pinpoint the exact model of printer is to provide the product/FPU number. Here is a link showing how to obtain that number for any HP device that you own.
Also, are you trying to set the printer up with an ePrint account at eprintcenter.com? Or did the registration site tell you that there was an error with your personal email address?
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?
Similar Messages
-
Signing up and getting started with HP INSTANT INK
Signing up and getting started with HP Instant Ink
Note: your printer must be connected to the Internet through a wireless connection.
How does HP make sure you’ll always have ink? Your printer uses the Internet to let us know when to send more ink. Here’s how you can get all the ink you need, delivered to your door.
Purchase an eligible printer.
Enroll in a plan based on the number of pages you print.
Ink, shipping, and cartridge recycling are included.
No annual fee—Change or cancel your plan anytime.3
We’ll mail special HP Instant Ink cartridges to you.
Our cartridges have more ink than standard HP ink cartridges, so you’ll replace them less often.
Billing and service start after you insert your first HP Instant Ink cartridge.
Your printer will tell us when to send ink.
Your service is not based on how many cartridges you use, so print as many high quality photos as you like.
You’ll always have ink before you need it.
See below for details on How to enroll for HP Instant Ink......
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP
This question was solved.
View Solution.When you enroll in an HP Instant Ink plan, you pay a monthly fee to print a defined number of pages per month. The plans are based on the number of pages that you print, not on how many ink cartridges you use. Your monthly fee pays for ink, shipping, and recycling. If you do not print all of your plan pages in a month, you can roll over up to the number of pages per month in your plan. If you print more pages, there is an additional charge. Ink is included — the plans are based on your usage so you pay for the pages you print, not the ink cartridges HP sends you. A printed page counts the same whether it is black and white, a color document, or a photo. Shipping is included.
What are customers saying about HP Instant Ink?
I signed up for Instant Ink to save money, but now I think the best thing about it is the convenience!— Jack C.
HP Instant Ink is a great way to always have ink when I need it, and it is so convenient.— Rene D.
I’m so glad that someone came up with this brilliant idea of HP Instant Ink because it is just so convenient. I’m completely satisfied with this service.— Nellie O.
I wanted to save money, so I signed up for HP Instant Ink!— Benjamin S.
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP -
Portable Firefox:
1. I click on the "hamburger icon" in the top right
2. I click "Sign in to Sync"
3. I click "Get started"
4. I get a blank screen with no option to create new or log in to existing account.
Installer Firefox or Firefox Mobile:
1-3: Same as above
4. I get the form to sign up and enter my credentials
5. I don't get an activation e-mailI've fixed the first problem, seeing a blank screen. This was due to Third party cookies. Apparently those has to be accepted.
But I still don't get any e-mail links to verify my account. I've tried to resend a couple of times from the Android app and from the portably installed version on Windows. I've also created a second account without any luck to be able to verify. -
my phone is not getting started,its displaying itunes sign and USB sign on the phone's screen. I have also restored and updated the phone however not getting started
It helped earlier but it has come back again. I don't know what to do. I tried what you said earlier but this time even this is not working either. And quite intrestingly my phone won't turn off. I turn it off, it goes off and then restarts on its own and then keep giving the same message again and again.
Could it be a charging cable, is there any chance that the cable which was working fine one day could turn to be "incompatible" with iphone the other day????????
Please help -
I am trying to get started and register my new ipad. I have been told to sign into " my info web page". How do I do that and where do I find it?
Hi,
You can register your new iPad here.
https://register.apple.com/cgi-bin/WebObjects/GlobaliReg.woa
Carolyn :-) -
I already used facetime before but for some reason I have to sign back in and it wont let me. I clicked "Get Started" then "Sign in" but then after about 3 seconds on the next page it just slides back to the "sign in page"
Try a Reset of your Device...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also see here...
Troubleshooting FaceTime
http://support.apple.com/kb/TS3367 -
Cannot connect to GET STARTED page
Hello,
First off, I am sorry, I did a search and saw numerous posts on this issue, but about all of them either ended their replies after a user asked "Did you do this or that ?" or they just stopped posting... at most I saw some topics where it magically worked later on, but no real step-by-step instructions.
So, the problem: I installed XE 11g, no apparent problems during install (no warnings so I assume everything is OK), tried the GET STARTED link, but it said it can't connect.
System: Win XP PRO SP3, 2 gb ram using Firefox 7.0.1
DB: Oracle 11g Express Edition
Antivirus: avast 6 (firewall included), but disabled during testing...
lsnrctl:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Produ
ction
Start Date 05-OCT-2011 02:36:42
Uptime 0 days 0 hr. 21 min. 51 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File E:\Database\Oracle\app\oracle\product\11.2.0\server\network\admin\listener.ora
Listener Log File E:\Database\Oracle\app\oracle\diag\tnslsnr\EASTFRONTIERS03\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=EASTFRONTIERS03)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status BLOCKED, has 1 handler(s) for this service...
The command completed successfullytns:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
) listener:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = E:\Database\oracle\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = E:\Database\oracle\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)Services:
OracleJobSchedulerXE
OracleMTSRecoveryService
OracleServiceXE (started)
OracleXEClrAgent
OracleXETNSListener (started)sqlplus:
SQL> connect
Enter user-name: SYS
Enter password:
ERROR:
ORA-01089: immediate shutdown in progress - no operations are permitted
Process ID: 0
Session ID: 0 Serial number: 0alert_xe:
Wed Oct 05 02:37:35 2011
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production.
Using parameter settings in client-side pfile E:\DATABASE\ORACLE\APP\ORACLE\PRODUCT\11.2.0\SERVER\CONFIG\SCRIPTS\INIT.ORA on machine EASTFRONTIERS03
System parameters with non-default values:
sessions = 172
memory_target = 760M
control_files = "E:\DATABASE\ORACLE\APP\ORACLE\ORADATA\XE\CONTROL.DBF"
compatible = "11.2.0.0.0"
db_recovery_file_dest = "E:\Database\Oracle\app\oracle\fast_recovery_area"
db_recovery_file_dest_size= 10G
undo_management = "AUTO"
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
dispatchers = "(PROTOCOL=TCP) (SERVICE=XEXDB)"
shared_servers = 4
job_queue_processes = 4
audit_file_dest = "E:\DATABASE\ORACLE\APP\ORACLE\ADMIN\XE\ADUMP"
db_name = "XE"
open_cursors = 300
diagnostic_dest = "E:\DATABASE\ORACLE\APP\ORACLE"
Wed Oct 05 02:37:53 2011
PMON started with pid=2, OS id=2308
Wed Oct 05 02:37:53 2011
PSP0 started with pid=3, OS id=1168
Wed Oct 05 02:37:54 2011
VKTM started with pid=4, OS id=1920 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Wed Oct 05 02:37:54 2011
GEN0 started with pid=5, OS id=372
Wed Oct 05 02:37:54 2011
DIAG started with pid=6, OS id=1580
Wed Oct 05 02:37:54 2011
DBRM started with pid=7, OS id=1552
Wed Oct 05 02:37:54 2011
DIA0 started with pid=8, OS id=2668
Wed Oct 05 02:37:54 2011
MMAN started with pid=9, OS id=2132
Wed Oct 05 02:37:54 2011
DBW0 started with pid=10, OS id=3716
Wed Oct 05 02:37:54 2011
LGWR started with pid=11, OS id=3952
Wed Oct 05 02:37:54 2011
CKPT started with pid=12, OS id=2992
Wed Oct 05 02:37:54 2011
SMON started with pid=13, OS id=2616
Wed Oct 05 02:37:54 2011
RECO started with pid=14, OS id=1764
Wed Oct 05 02:37:54 2011
MMON started with pid=15, OS id=4012
Wed Oct 05 02:37:54 2011
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
ORACLE_BASE from environment = E:\Database\Oracle\app\oracle
Wed Oct 05 02:37:55 2011
AUD: OS Error = 1717 encountered while writing audit record
Wed Oct 05 02:37:54 2011
MMNL started with pid=16, OS id=1516
Wed Oct 05 02:37:57 2011
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
Shutting down instance (immediate)
Shutting down instance: further logons disabled
Stopping background process MMNL
Stopping background process MMON
License high water mark = 1
All dispatchers and shared servers shutdown
AUD: OS Error = 1717 encountered while writing audit record
Starting ORACLE instance (normal)
Wed Oct 05 02:38:02 2011
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
Wed Oct 05 02:38:03 2011
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
Wed Oct 05 02:38:03 2011
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
Wed Oct 05 02:38:03 2011
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit recordFrom what I could gather from other posts here (and on other sites) the problem is I don't have anything listening on 8080. Other than that, all seems OK (I think).
So, can anyone tell me\help me on why that one isn't starting ? I reinstalled this 6 times and still can't figure out the problem... (as you saw, I even replaced the tns hostname with 127.0.0.1 out of paranoia). It's seriously driving me mad. Every topic I searched for (from the problem itself to even a step-by-step for dummies) shows an install, then the interface working... I see some questions regarding "I can't connect to..." but most are unanswered :(
Thanks in advance!
P.S. let me know if I forgot to mention anything relevantTheNomad wrote:
orafad: Sad to say that was the full output...
C:\Documents and Settings\User>sqlplus / as SYSDBA
SQL*Plus: Release 11.2.0.2.0 Production on Thu Oct 6 12:55:47 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> select 1 from dual
2 /
select 1 from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
SQL>
jgarry: I believe what you explained may be related to the fact some reported the DB doesn't work properly when the event log is full (I just emptied mine so it doesn't apply). Normally I disable it but without it started, the DB is not working properly (not that I can get it started anyway).
There was a post on a site I found hinting at 3 things:
1. ORACLE_HOME must be defined as an env-var
2. ORACLE_SID must be defined as an env-var
3. there might be a problem with spfile
Regarding those:
1. shouldn't the setup declare it automatically ? I don't have it declared, but I added it (no change)As Orafad pointed out, Windows is different. It does have a search hierarchy it follows to figure out what the environment should be. So first, unset what you set and go into a cmd window and:
sqlplus sys as sysdba
Edit: Oops, I meant
sqlplus / as sysdba
startup
2. same as above, except I am not sure what SID to add so I didn't declare it ... The only 2 I have are PLSExtProc and CLRExtProc in tnsnames by default. I tried with each but the only thing that changes is instead of getting the shared memory realm error I get a TNS adapter error... trading one error for another is not funFor XE, the ORACLE_SID is XE (unless you do screwy things to change it). So now that I see you had some other db installed before, I suspect an environment collision. Delve into your registry and see what oracle definitions you have - this is a lot of work, things are spread around some, but searching for oracle is usually a good start. I'm not up on the 11.2 details (or others, really, I just have vague memories of seeing MOS notes that purported to explain clean up entirely, without truly doing so, and I avoid Windows as much as possible). I would uninstall XE, uninstall the other one, then search the registry for any leftover stuff, then install XE and see if it all magically works. But that is a fairly brain-dead way to deal with it.
So that said, you can set up a little batch file to set your environment in a cmd window (specifically ORACLE_HOME and ORACLE_SID), and go into sqlplus / as sysdba and give the startup command. If you get the memory realm error, you have one of those wrong, if you get the tnsnames errors you can fix those following the advice in Ed Steven's blog. You can run tnsping to see which tnsnames.ora you are using, if you use one (which is determined by an @ sign in your connection string, which you should not need to connect locally, but if you do, you need to have XE defined in the tnsnames.ora, and may need to set TNS_ADMIN to get the right one).
Your tnsnames.ora should have an entry like this:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Yourcomputer.yourdomian.whatever)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
)You might want to search for any tnsname.ora on your computer, the default correct one would be: C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN\tnsnames.ora
3. I don't have that file in the folder but I suspect it might be created on a first successful launch of the DBWithout an spfile you need to use a pfile, then create a pfile from spfile. But there should be one at C:\oraclexe\app\oracle\product\11.2.0\server\dbs\SPFILEXE.ORA (if you used default installation).
>
Other than that I didn't find anything helpful in logs (or don't know where else to look), nor on sites.
I did have WAMP installed at a point (uninstalled it) but if it were to conflict I guess SETUP would tell me (since the XE license doesn't let you use 2 DBs at the same time)Is that some mysql thing? That shouldn't interfere. It's only installing multiple Oracle products related some what to the Oracle database that can be a problem, and normally isn't with the more recent stuff.
I swear to god this is killing my neurons :(When you find the solution, you will slap your forehead.
Edited by: jgarry on Oct 6, 2011 9:36 AM -
"Get Started" URL is rejected and XE database does not appear to start
Hi,
Brand new to Oracle, so I apologize for my ignorance. Have spent 3 days trying to launch the Get Started URL that Oracle puts on my desktop, or connect with Rapid SQL. I've spent all day today trolling these forums and am unable to resolve this issue.
OS: Windows 7 Enterprise SP1
System: i7 @ 2.7GHz, 8GB RAM, 64-bit
DB: OracleXE 11g
Error message from Chrome when I try to connect to http://127.0.0.1:8080/apex/f?p=4950: Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection.
Here is the result of my TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 16-NOV-2
012 14:42:28
Used parameter files:
C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = CONNECTL
AP28.awi.state.fl.us)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVIC
E_NAME = XE)))
OK (0 msec)
Here is the result of my LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Produ
ction
Start Date 16-NOV-2012 13:41:57
Uptime 0 days 1 hr. 2 min. 50 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\11.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\diag\tnslsnr\CONNECTLAP28\liste
ner\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=CONNECTLAP28.awi.state.fl.us)(PORT=1
521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Here is the result of my sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Production on Fri Nov 16 14:47:53 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-28056: Writing audit records to Windows Event Log failed
OSD-00512: Message 512 not found; product=RDBMS; facility=SOSD
O/S-Error: (OS 1722) The RPC server is unavailable.
ORA-28056: Writing audit records to Windows Event Log failed
OSD-00512: Message 512 not found; product=RDBMS; facility=SOSD
O/S-Error: (OS 1722) The RPC server is unavailable.
Enter user-name: system
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Process ID: 0
Session ID: 0 Serial number: 0
I have uninstalled and reinstalled the 64-bit version, the 32-bit version, repaired, stopped and started services, changed KEY_XE.reg, and the properties of the Get Started URL. No luck so far. Please let me know what I can do.
Thanks in advance.Thank you for getting back to me so quickly!
When I signed in to Event Viewer, I got an error message that my event services weren't running, so I downloaded this fix from Microsoft: http://support.microsoft.com/kb/2478117
That started my Event Services and allowed me to sign into Event Viewer and clear my logs. They are all clear now.
Then I repaired my version of 11G and rebooted, but am still unable to connect to the database or the Get Started URL.
Here are my statuses:
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Produ
ction
Start Date 16-NOV-2012 16:31:35
Uptime 0 days 0 hr. 2 min. 30 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\11.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\diag\tnslsnr\CONNECTLAP28\liste
ner\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=CONNECTLAP28.awi.state.fl.us)(PORT=1
521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL> exit
sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Production on Fri Nov 16 16:34:42 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL>
At least it's a different error message now! Any ideas?
Edited by: 971714 on Nov 16, 2012 1:40 PM
Edited by: 971714 on Nov 16, 2012 1:41 PM
Edited by: 971714 on Nov 16, 2012 1:41 PM -
Getting started with air and android
Hi,
I made a game using flash as3 technolgy some time ago, that is deployed in a website. I've been studying the possibility of porting the game to mobile devices (android). Is that possible? Wich level of effort am I going to need? Wich tools from adobe am I going to need?
I think that's all for now... thanks!That's great! I also bought a book in amazon to help me to get started
Thanks!!
Sent from my iPhone
El 09/04/2011, a les 23:20, Saumitra Bhave <[email protected]> va escriure:
The development process remains almost same. In flash development you create swf and put it in HTML using object or embed tag. In Adobe AIR you create SWF and package it using the ADT tool which comes with AIR SDK.(But, With adobe AIR you get some more APIs which you don’t have in Flash)
While packaging you can tell the adt to package for Android, iOS or any desktop. And provide the required parameters along with the SWF and application xml.
Once you create the apk. You can install it on actual device or android simulator.
For testing purposes you can generate a self signed certificate using java -keytool command.
You can google any of the following things to get started.
1. Android SDK, adb tool, creating Android emulator
2. AIR adt - package command for android
3. java -keytool help
> -
I recently purchased face time, yet I am unable to sign in - I keep getting an error saying I need to check my internet connection. I have turned off my firewall. Any thoughts???
I just installed it today and was signed in at the end of installation and when I quit the program and tried to sign back in I started getting the same message. My firewall is off as well. I wish someone would answer the friggin question LoL.
-
Getting started with Oracle 11g express edition
I am currently in a college class doin SQL. I have downloaded oracle 11g express edition. I'm trying to get started and when I try to create a new connection it takes me to a screen where I have to sign in. When I use my oracle sign in and pass word it tells me it doesn't recognize it. No I know it works because I can sign in on the web site. But it won't connect me or allow me to make a new connection. I really don't understand what is going on. I can seriously use some help. Something that will take me step by step on what I need to do. I have to create a data base and I'm not sure how to do it.
Thank You
Carl GavinHello Carl,
Something that will take me step by step on what I need to do.Sounds like what you are searching for is the [url http://docs.oracle.com/cd/E17781_01/admin.112/e18585/toc.htm]Getting Started Guide.
If you need some advanced knowlege, there would be the "2 Day DBA Guide", which, among other topics, contains a section on [url http://docs.oracle.com/cd/E17781_01/server.112/e18804/connecting.htm#CEGIFAHF]Connecting to the Database. I think you'll find all necessary information (background and step by step description) you need.
-Udo -
Move minus sign(-) from end to start of field
Hi,
How to Move minus sign(-) from end to start of field. i e if var = 120-, i want to display it as -120.
if any one has the code , send me.
Thanks in advance
Krishna.Check the code, i hope it serves your purpose...
data:
var(10),
length type i.
var = '300-'.
write var.
length = strlen( var ).
length = length - 1.
replace first occurrence of '-' in var+length(1) with ''.
concatenate '-' var into var.
write:/ var.
Reward points if useful, get back in case of query...
Cheers!!! -
I recently downloaded a trial version of photoshop but I can't find a simple enough way to start it. I'm signed in but when I press the "get started" button it brings up the purchase options. I just want to run the trial for now. Any ideas?
Jacobm51486856 please see Sign in, activation, or connection errors | CS5.5 and later for information on how to resolve the connection error preventing your membership from being authorized.
-
Even though I checked the keep me signed in box, I have to sign in to get to my home page
I have the keep me signed in box checked but I have to sign in to get to my home page. It comes up with the set up your home page.
The default Homepage in Firefox is '''about:home''', which isn't a page on the internet, it is built into Firefox and doesn't have a login. It does look a lot like the [http://www.google.com/firefox Google / Firefox start page] which was used previously, but it isn't the same.
Firefox doesn't use the Homepage setting in Internet Options.
See [http://support.mozilla.com/en-US/kb/How+to+set+the+home+page How to set the homepage]
As far as "remember me" for web site logins, that is usually done with a cookie, if you clear your cookies when Firefox closes, you won't be "remembered". -
BW publisher is not getting started
Hi All,
I have successfully installed BOXI 3.1, Crystal reports 2008 SP1, Xcelsius & SAP Integration Kit. I also have the Single Sign on successfully working. I have also tested the connection to the BW server and able to connect to the cubes and the BEx queries from the Designer.
The issue is the BW Published Service 12 is not getting started and when I create a RFC connection, I am getting the connection timed out error.
Kindly assist.
Regards
Purushothamtake a look here:
Publishing part 1
/people/ingo.hilgefort/blog/2008/09/23/businessobjects-and-sap--publishing-of-crystal-reports-part-1-of-3
Publishing part 2
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-2-of-3
Publishing part 3
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-3-of-3
ingo
Maybe you are looking for
-
I have quite a few CDs that I have ripped to the hard drive of my xbox 360, and I would like to figure out how to load them on my ipad. Any help would be greatly appreciated. Thank you
-
BT Infinity - HG612 and second router question
Hi, I've got an odd question. I have BT Infinity and have the HG612 VDSL modem. Does anyone know if and how it can be configured to bridge its WAN connection to another router? For work I need site-to-site VPN access, which is performed by this other
-
Develop Mode 2nd Monitor not showing edit adjustments
I am using Lightroom 4.1 RC2 on a Windows 7 64 bit system with dual monitors. When I am in the develop mode and make edit adjustments on any setting the 2nd monitor does not update. If I move to another image then come back the image is updated but i
-
what's the best way to move content to a new library I created ie a holiday music only library?
-
Can't sign in to my blackberry app world
for 6 months now can't sign in to my blackberry app world.........cant upgrade nothing on my phone ......am asking for help please....thank shemara davy. davy Solved! Go to Solution.