Signing in with photoshop elements 12 (windows vista)

When try to sign in with photoshop elements 12, i get a grey screen that says that my computerclock needs a setup or that there isn't any intenet connection. But the computerclock and internet connection are ok. What's the problem here? How can i Solve it?

Dear Sara, i can't read your answer on this forum. Can you please send your answer to my emailadres [email protected]? Thanks in advance!

Similar Messages

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying "attempt to access invalid address" then "application not respo

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart

What is the size of your hard disk? PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine. Just a thought here.

Problem with Photoshop Elements 8 an Windows Live Mail...

i get the message that Elements Organizer can not send E-Mail Messages (with Windows Live Mail).
What could be the reason? I work with Photoshop Elements 8 and with Windows Live Mail (11). The OS is Windows 2012
Has someone a idea why it does not work?
Thanks

Hi,
None of the Windows versions currently support Outlook 64bit. I think it is mainly due the problems associated with 32bit applications (like PSE) talking to 64bit applications. Maybe things may change if PSE ever gets a 64bit version for Windows.
I have Outlook 32bit and that works with PSE 8.
Microsoft actually recommends installing the 32bit version of Office to avoid incomparability problems with other applications so I don't think that PSE is unique.
Brian

How can i use windows live email with photoshop elements 5.0

How to use Windows Live email program with Photoshop Elements 5.0. The prefference only lets you use Outlook express.
Any help please.
Al
[email protected]

You've got the wrong forum, the Photoshop Elements forum is this way:
http://forums.adobe.com/community/photoshop_elements

Be grateful for your help with Photoshop Elements which I have been using for several years.

Be grateful for your help with Photoshop Elements which I have been using for several years. Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements. On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’. 1. Is there a relationship between Elements and My Pictures and is Elements dependant on the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more? Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one? Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop. I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue. I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music. Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response

The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.

Getting internet connection error with Photoshop Elements 12

I have recently downloaded and installed Elements 12 on my windows 8 PC. When I try to open any image with Photoshop Elements 12 Editor, I am asked to Sign In. However, when I click on Sign In button, I get internet connection errror though I am connected to internet. At the same time, other apps on my PC are able to access internet.

Check to be sure that PSE is allowed through the firewall. Incidentally, you need to stay signed in once you get it connected. That's the PSE 12 equivalent of activation and signing out will deactivate your computer.

Trouble with Photoshop Elements 8

Every time that I print a photo using Photoshop Elements 8, the photo show vertical lines and the colors are awful. I cannot print a photo using Photoshop Elements 8. I checked the printer and has no any problem. I print all my photos using Windows Photo Viewer. I have no idea what's happening with Photoshop Elements 8. Can anybody help me with this problem?
Thanking you in advance for any help.

Celentano I am sorry but what is the exact error you are receiving when trying to install Photoshop Elements 8? Also which operating system are you installing it on?

Help with Photoshop Elements, I'm new to it?

So I'm just fiddling around with Photoshop Elements, and I have a picture of a crocodile that I'm trying to turn blue, so I'm using the Smart Brush and Blue Sky effect to change his skin colour.
Firstly, is there an easier way to change the colour of something that I'm missing?
Secondly, how do I control the Smart Brush precisely? The thing is his body is about the same colour as the water so when the brush gets to a certain point the entire image turns blue.
So how do I select the crocodile but not the water?
Thirdly, the brush. I can draw with the brush, but then I get the "wait" symbol and my changes vanish. How do I stop this?
Thanks for replies, and I'm sorry for my noobishness, I just got Photoshop Elements yesterday.

You can make the brush cursor larger & smaller with the bracket keys next to the letter p on the keyboard. This affords more control in making the selection.
Use of the Smart brush tool is probably the easiest way to colorize an object. The tool has a buit-in mask. If you look on the Layers palette (Window>tick layer), the black and white rectangle represents the mask.
Left click on the mask, then access the brush tool (the ordinary brush B) and with a black brush paint over the area where the blue spilled over to the water. If you go too far, paint with a white brush to correct.

What a disgrace Adobe with Photoshop Elements 13

I brought Adobe Photoshop Elements 13 trusting the garbage Adobe went on about it only to find you go and install it and it won't get pass Payloads Adobe Elements 13 Organizer it just fails as a small business I ended up trying to install it on 4 different computer using Windows 8 and 8.1 64 bit and nope the same thing happens I even trying installing the 32 bit program same thing you can not get pass Payloads Adobe Elements 13 Organizer as far as customer support it appears there is none you can't contact anyone at Adobe to get you money back they just don't care. I have gone back to using my old version Adobe Photoshop Elements 11 it works and no issues. I recommend no one buys Adobe Photoshop Elements 13 until Adobe fixes the issues and most of all provide the customers proper support. I wont my money back for a software program that is useless and I can't use. They say you have 90 days from time of purchase to request a refund well what a pack of lies that is as you CAN NOT GET ONTO ANYONE AT ADOBE if you do get on to some one they will tell you your 90 days has expired this is that they think of there customers world wide.
I'd rate Adobe 0 = for the program and I'd rate their customer service 0 and never buy another product from them.

I agree with you about the lack of customer support. I was able to install it with no problems but when I wanted to print to one of my printers I had a lot of problems. I can only print to one of the printers and it won't print correctly. I contacted Support and chatted with one of the people. I was told that only the forums take care of Photoshop Elements. I also wish that I had stayed with Photoshop Elements 11. After installing 13 the printer issues are in my photoshop elements 11 program. I certainly would not recommend anyone purchasing an Adobe product because of the lack of support.

Photoshop cs3 + windows vista + intuos 3

I am working with "photoshop cs3" "windows ultimate vista" and an "wacom intuos 3" tablet and I experience heavy lags while drawing like the brush-strokes don't quite follow my moves, and I have to wait for them to catch up.
When I open a large file and I try to apply the first brush stroke on my drawing the cursor screen disappears for a while and photoshop is not responding.
Then Photoshop comes back so the cursor and I can start to work. But as soon as I drag the page using the little Hand tool photoshop stops responding again for few more seconds and when it restarts I can hardly control the direction of my new brush strokes.
Apparently in order to restart the only remedy I found (by chance) is by toggling the layer visibility status (change a layer from visible to not and back to visible again). After this exercise I can draw in photoshop again! But of course same problems again as soon as I will use the hand tool and move on the screen again!!!
Any idea about what could be behind my problems!?
What should I check?
(These problems started after last week immediately after re installation of vista on my machine, I never had this problem with vista photoshop and intuos on that same machine before!)
Thanks
Mario

I have CS3, Vista Ultimate and an Intuos3 tablet. No lags or delays now. But I used to have them and many were reported on the Wacom Users Forum when Vista first came out. I can't remember now what the fix was - have a look on the Wacom Users' Forum. If you had it running ok on your previous Vista installation some software setting must have changed in the new installation. Things that may help are:
get latest Nvidia vga card drivers (if you have an Nvidia card); get the latest Wacom driver; Logitech Setpoint software conflicting - the latest is ok for me; disable/switch off the Vista Pen and Input device.
Sorry, I can't remember the fixes but they should be available if you dig around in the Wacom Users' Forum.
David

Batch Editing with Photoshop Elements 4.0

I have an folder of photos which I would like to resize as a batch with Photoshop Elements 4.0. However, I am at a loss as to how to do it and am missing a step or two in my workflow.
I would appreciate any specific step by step suggestion that you may have.
Thanks for your help.
Vernon

not for "batch editing"
You can set PSE as the external editor in the iPhoto preferences. iPhoto has the capability to directly interface with any external editor - simply go to the iPhoto preferences (iPhoto menu ==> preferences ==> General and set the Edit photo option to in external editor - select the desired external editor and you are set - now when you edit photos they are sent to the selected external editor and when you are finished editing you save (not save as) and the edited photo is returned to iPhoto, the original is maintained in iPhoto and the iPhoto database is correctly updated.
If you want the option of editing in either iPhoto or the external editor after selecting your external editor simply set the edit in back to main window - now when you right click (control Click) on a photo you will get a menu which allows you to select either.
LN

What is the best motherboard to use with Photoshop elements 11 premium edition?

I'm going to build my computer by selecting components and having Fryes service put them together. I'd like to build a system with a motherboard that supports 8 gb RAM, and a 250GB SSD drive (SATA III) with a 750gb or 1 TB 7500 rpm slave internal drive or an similar 7500 rpn external drive. The system I build will have usb 3 and hdmi ports with a dvd rom 24x drive. It will have a Windows 7 premium home edition OS. It will have an Nvidea video card with 2 gigs of independent ram.
I'm trying to build a PC that works efficiently with Photoshop Elements premium version 11. I am a casual home user. I will be doing some basic video rendering of DVD home videos that I have converted to dvd from VHS and 8mm format.. I am NOT a gamer.
I have a monitor and therfore I'm only interested in building a desktop box with thease specs and I'd like to get the best quality componenets for my desktop build for $1300 or less.
I'm not interested in anything from Dell (alienware).
Any motherboard recomendations or criticism/recomendations of other components I want to use will be greatly appreciated.
Thanks

It’s really a personal choice. I’ve recently bought a new Dell. Like you I was not interested in the consumer products so I purchased a business spec machine and I’m very happy with it. It’s Dell Precision T3600 with Intel Xeon CPU and Nvidia Quadro 2000 graphics card. Running Windows 7 Pro 64 bit with 8gb RAM. I got 1TB and 500gb drives both 7500 rpm with a 3TB Seagate external HD. I gave SSD a miss until prices drop further. I don’t think the extra speed is that relevant to Photo editing although perhaps more relevant to video rendering. I’m also not gaming or running other apps that might benefit from an SSD. Photoshop Elements is a 32 bit program which runs well on 64 bit systems but cant use more than 1.5 to 2GB of RAM. Premiere Elements has 64 bit support and can therefore take advantage of the extra RAM. At the end of the day it’s your choice.

Iphoto Editing with Photoshop Elements 9

I am going into Iphoto, clicking the Edit button and it brings up Photoshop Elements 9. I make changes, they
look OK so I save it. When I get back to IPhoto, it looks like the change has been made. However when I go
back later in the day and click on the updated photo and there is a triangle with an exclamation point in the middle.
This means it can't find the original. They're all located in Iphoto, what is happening? Why does it look like the changes
are make and then I can't find them?

I do use a Mac, so I don¹t think versions is an issue. I would rather
pictures edited in PSE, which began life in iPhoto, should always be saved
back to iPhoto, as they were in Elements 8. That is not happening. Neither
do I know where to find pictures that PSE has saved.
From: "Barbara B." <[email protected]>
Reply-To: <[email protected]>
Date: Sun, 21 Aug 2011 15:05:25 -0600
To: Warren Newman <[email protected]>
Subject: Iphoto Editing with Photoshop Elements 9
>> The save dialog sees an original and asks for permission to change it.
If you see the save as dialog you don't have your saving files preference set
correctly. To make versions, you must set it to Save over Original.
However, note that there is a big ol' bug in the mac version that if you even
open that particular preference window (even if you don't change anything
there) PSE will no longer add file extensions when you save. When using PSE as
external editor it doesn't matter so much, but if you ever save to the desktop
you will need to add the file extension manually to the saved file.
>

Can I link iPhoto with Photoshop Elements Editor?

The new AppStore PSE Editor doesn't seem to link with iPhoto like the full version

If you're referring to iPhoto on your Mac:
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note 1: screenshots are from PSE 10
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
Be sure to select the correct item in the Adobe Photoshop Elements folder as the external editor in iPhoto:
OT

I have Mac os10 yosemite and with photoshop elements 13 I cannot get a menu from Print to change the type of paper. Where is that menu The one that comes up only alows for paper size not type

After clicking print the menu that comes up does not allow for a change in paper type. Where can I change the paper type. OS 10.10 Yosemite with Photoshop Elements 13. I have a windows computer with the same program and the print menu has a paper settings option but not on the the mac. What gives. Is the Elements 13 not compatible with the OS 10 Yosemite? Thanks for any help

If you delete all the Adobe Reader stuff it will probably fix this. For almost everything, the Apple pdf handling works better.

Signing in with photoshop elements 12 (windows vista)

Similar Messages

Maybe you are looking for