# signs instead of polish letters ą, ę etc. after SAP upgrade.

I am not sure that it is connected with SAP upgrade see my another topic on SCN Rabax during sap gui login
Do you know what could be the reason and is it reversible? Maybe there are some settings in SAP editor?
It is nonunicode ECC 6.0 EHP6 (after upgrade). Before upgrade it was ECC 5.0.
Thanks in advance.
QAS

Hi,
Looking at the thread:
Rabax during sap gui login
it seems you have changed entries in TCPDB from 1401 to 1100.
This would explain your problem.
I would recommend to do a proper setup via report rscpinst.
Therefore you need to know how the system was setup before the upgrade.
If it was single code page with 1401, you need to maintain the used languages and the country field according to SAP note 43205 (the country setting can be found in table TCP0D in the old system).
Best regards,
Nils

Similar Messages

  • How do i install MS Ofiice tools (Word,Excel...etc).after software upgrade

    How do i install MS Ofiice tools (Word,Excel...etc).after software upgrade

    OK. Connect the BlackBerry to your PC via the USB cable and start the BlackBerry Desktop Software.
    If you are asked to upgrade anything after starting the Desktop Software, cancel and don't upgrade for now.
    Click on Device > Applications.
    Scroll through and find PassWord Keeper and DocumentsToGo (or WordToGo, SheetsToGo, etc.) and click to install, or press the + symbol to add those apps to your device.
    Complete the ensuing prompts and they should install correctly for you.
    Good luck.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • XLR stopped to work after SAP upgrade

    I upgraded a customer from 2005A SP1 to 2007. XLR worked before the upgrade and stopped to work after the upgrade.
    I get e message that COM Add-ins command is not loaded, but it is exist in Excel and worked fine before the upgrade.
    In SAP Note 1287193 I found that I may want to clean up my registry. In 2007 XLR is part of the Installer, so I can't reinstall it. Can I use in this Note?
    Thanks,
    Olga

    If you only get COM Add-ins command is not loaded, you may just need to run ComAddIn_per_User_RegKey.reg under C:\Program Files\SAP\SAP Business One\AddOns\XLR\XLReporter\Client.
    Try this first.  That is the simplest way to handle the error.
    Thanks,
    Gordon

  • Newly Created authorization Objects after SAP Upgrade

    Can someone tell me whether there is any transaction or table that display the added object authorizations after a Sap Upgrade ?
    Thanks in advance.

    Also, you can check SAP_NEW profile which shows which authorization objects have been added in which release.

  • PDF in Japanese language not appearing after SAP upgrade

    Hi,
    When a P.O. is generated and when user clicks on Print Preview a PDF file will be generated and sent to the Vendor in Japanese Language, It was working fine now some SAP upgrades has  been done last week, Now nothing appears in the PDF P.O. generated, So please let me know what went wrong and is there a seperate package for Japanese language or how to go about this.
    Points assured.
    Regards,
    Prabhu

    Please help me.....
    Points assured
    regards,
    Prabhu

  • No IM etc after N76 upgrade

    I just upgraded my N76 and all the discussions and the phones own Help say it should now have IM on it, but it doesn't.
    The upgrade worked fine, *#0000# now says:
    V 12.0.006
    05-05-07
    RM-135
    © Nokia N76 (71.01)
    Help says Instant Messaging should be under Menu -> Applications -> IM, but there's none there. In fact none of the Menus have changed, and I've been through everything to see if its been moved somewhere other than where the Help says.
    As per the instructions (and common sense!) I did a back-up to the card first. When it came back on after the upgrade I figured the easiest way to restore my settings was to do a restore from the card again. Then I noticed nothing had changed in Applications or anywhere, and App Mgr and Settings didn't show any new apps. It occurred to me that by restoring it from my back-up I might have scratched the new app menus and restored the old ones somehow, so I re-installed the upgrade and checked the menus again straight afterwards - just as it powered up again afresh - but still no IM or any other app changes.
    What am I missing?
    Thanks in advance,
    Dave

    Yeah korngear, that's what I was afraid of. I did it through Nokia Software Updater and it all seemed to work very smoothly, and as I said I did a re-install too, not that that proves anything. Hmmmm, worrying.
    And I just tried that link scoobyman (thanks) but when I go to Download! it doesn't list WinLive (even after Refresh List). On that web page it does say the N76 is supported so I guess it must be something about my phone
    (In case it indicates anything, my Download! only lists: QuickOffice, F-Secure, Amazon, ZIP Manager, AAL, Mail for Exchange, Search, Snakes and XpressPrint).

  • HTML Page not appearing after SAP Upgrade from 4.6c to ECC 6.0

    Dear All,
    I am novice in ITS and IAC configuration stuff....
    Issue: We have a HTML page which shows a tree structure of Functional location and Equipments. A Z transaction is built to cater the requirement. User logs on to the HTML page navigates thru the Tree structure of Functional locations and equipments and the logs the workrequest or Break down details. In 4.6C every thing is working fine. But after Upgrade in Testing Server (We are not go live yet) we are facing a problem where the HTML page with tree structure is skipped off and directly the Z transaction is appearing on the web page.
    Did any one faced such issue? Any thoughts is highly appreciable?
    Thanks,
    Sanjay.

    Thanks Frank and Dhurairaj....and sorry for the delay in responding..
    I have checked my service in SICF and it is active. I also tried to create a new Service and now I am now getting "500 Connection timed out" error.
    Our Z transaction is ZW03 and Service name is ZW03_2.
    We are on Netweaver 7 (2004s)
    Steps I followed:
    1. Created a Service ZW03_2 in SICF (New Sub element) and then Activated.
    default host -> SAP -> bc -> gui -> sap -> its
    2. Created a folder ZW03_2 under SAP->Public->ITS (Transaction SE80, MIME Repository) and imported all MIME objects into that folder.
    3. Created a Internet Service ZW03_2 in SE80. Once I created a Service already there is blank folder Topic 99. Then I created two folders Mime Objects and HTML Templates. Imported all Mime objects into folder "Mime Objects" and Created templates in "HTML Templates" folder. Then I published ..
    After doing all the above setting then I tried to test the service and I am getting 500 Connection time out.
    Please let me know if I missed any step or if I have done any setting incorrectly.
    Thanks,
    Sanjay.

  • Safari will not stay logged into Facebook/Pinterest/Fitocracy/etc. after Mavericks upgrade. How to fix?

    After upgrading to Mavericks, Safari now will not stay logged into any site that requires a username/password, such as Facebook, Pinterest, Fitocracy, etc.  I can log in and browse for a minute or so, then all of a sudden it is as if I am not logged in.  As an example, Facebook will require me to log in again, remember browser, and then I get the security warning email since I have that feature activated with Facebook.  It is as if Safari completely forgets everything.  I believe it has to do with the new iCloud username/password sync function...  How does this get fixed?

    Try deleting the Safari cache.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now click Develop from the menu bar. From the drop down menu click Empty Caches.
    Quit and relaunch Safari.
    If you still have problems, try troubleshooting Safari extensions.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. I
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
    If it's not an extensions issue, try troubleshooting third party plug-ins.
    Back to Safari > Preferences. This time select the Security tab. Deselect:  Allow all other plug-ins. Quit and relaunch Safari to test.
    If that made a difference, instructions for troubleshooting plugins here.

  • Error adding Freight as Expense to Invoice in DI API after SAP upgrade

    Hi All,
    We recently upgrade from
    SAP B1 2005 A (6.80.320) SP: 01 Patch Level 36
    to
    SAP B1 2007 A (8.00.178) SP: 00 Patch Level 42.
    A .Net application using the DI API has successfully created orders/invoices with Tax and Freight charges successfully for years.  We upgraded to SAP 2007 and I upgraded the SAPbobComm library in the application (and 3 other integration apps).  Now, I can currently create new Invoices as long as the invoices don't require me to add the Freight charges.  If I include freight charges, I receive the following error:
    "Internal error (-5002) occurred"
    Here's the code I'm using to add the Freight charges:
    oInvoice.Expenses.Add()
      oInvoice.Expenses.ExpenseCode = 1 'ExpnsCode value for the "Freight" expense in the OEXD table
      oInvoice.Expenses.LineTotal = dblFreight
      oInvoice.Expenses.TaxCode = "GEN"
    returnCode = oInvoice.Add
    I haven't touched this code in years, so any help would greatly appreciated.
    Thanks.

    How did you fix this issue?
    Thanks,
    Shea

  • Pipeline withdrawal fails after SAP upgrade 4.6B to ECC 6.0

    Hi experts,
    our customer has been using Water as a pipeline material for years now, but after upgrade to ECC 6.0, we receive error message M7009 (Special Stock P not defined) when trying to perform a goods issue to process order for this (same) article.
    Strangely, the error message only comes up when we use COR6 or MIGO's 'Goods issue to order' or 'to reservation', and not when we do 'goods issue other', manually take movement type 261 P, and check.
    Now since the only difference I can see at this point is the absence of the Reservation tab in MIGO, I assume the reservation has something to do with this error.
    Any ideas?

    Hi,
    before confirming production order via Co15, in goods movements, there is storage location populated for this material. If I delete SL for it, then goods movement is succesfully done.
    In ecc 5.0, SL is also populated but it is working fine.
    Any idea?
    Edited by: Alberto Emilio Gallardo Doñate on Apr 22, 2010 12:21 PM

  • Sales order do not create after SAP upgradation to package EHP7

    Dear Experts,
    SAP client is recently upgraded to EHP7. Since then we are observing difficulty in Sales order creation [VA01] manually [with or without order reference].
    When click on SAVE button, entire screen display get freezed, without any message [Error/Information/Warning] pop-up. it seems as if system was trying to display message; caused due to any kind of event occurrence; but unable to show up.
    Moreover, when we click on "BACK" or "EXIT" button, then it prompts choices to save the data. Yet again we receive the same freeze response whenever chose "Yes" option.
    Please note:- before up-gradation, we were able to create orders with the same data, what we are using to create now.
    Any help or clue on this subject would be highly appreciated.
    Thank you for all your help.
    Best regards,
    Rahul Agarwal

    Hi,
    did you check what are the sales orders Enhancements that are activated with EHP7 under T.code-SFW5

  • SO28 Inbound Mail Sender Email Address not available - after SAP upgrade

    We have recently upgraded support packages on our R/3 system and
    discovered that inbound emails (SO28) that could previously be identified by
    the email address in the format of typical email address format are now coming
    into the system in the format outlook display nameu2018lastname, firstnameu2019.   We use the email address to validate against the SU01 data to make sure the email is coming from a valid user.  This is causing our custom written validation of the inbound email address to fail.
    We are using function module SO_DOCUMENT_READ_API1 and retrieving the
    email address from the field document_data-send_fnam.
    We have updated the following support packages
    BASIS 6.40 SP 17 to 21
    ABAP 6.40 SP 17 to 21
    SAP HR 5.00 SP 21 to 39
    PI_BASIS 2005_1_640 SP8 to 13
    SAP APPL 5.00 SP 10 to 18
    PI 2004_1_500 SP12 to 17
    EA_FINSERV SP10 to 18
    Has anyone ran into similar issue?  If you have, could you let me know how did you resolve your issue.
    Thank you.
    Jennifer Tran

    from the SOFM object 'OFFICEOBJECT' in the
    implementation of the RECEIVE method of bor object ZWIMAILREC. The
    address object of the sender is a attribute of the SOFM object and thereis it possible to get the address string.

  • WCF-SAP Adapter throwing errors after SAP Upgrade from ECC 5 to ECC6 Release 640 to 700

    Hello Everyone,
    We were able to communicate(Send and Receive Idoc's) to SAP via WCF-SAP Adapter in BizTalk 2010.
    SAP Servers were upgraded to ECC5 to ECC 6 and we started facing below issue communicating on send and receive both.
    I am aware that there is a hotfix available but that is more on the Receive Side from SAP. Nevertheless I installed the hotfix but issue still persists. Any suggestions will be highly appreciated.
    Microsoft.ServiceModel.Channels.Common.XmlReaderParsingException: The segment name is not valid for the IDOCTYP, Release, or CIMTYP. Segment name: E2EDP01006GRP   IDOCTYP: ORDERS05   
    Release: 700    CIMTYP: . Ensure that your message xml validates against the operation schema.
    Server stack trace:
       at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
       at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
       at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
       at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
       at Microsoft.BizTalk.Adapter.Wcf.Runtime.
    Thanks,
    Vikingss

    I am aware that there is a hotfix available but that is more on the Receive Side from SAP. Nevertheless I installed the hotfix but issue still persists. Any suggestions will be highly appreciated.
    For this issue, you can contact Microsoft support directly(http://support.microsoft.com).

  • I have problem with polish letters after thunderbird reinstalation. Font seems do not see it ..

    I can write mails in my native hovewer when i receive feedback Instead of Polish letters i see "chinesse bushes"

    What version are you using?
    What is selected at View | Text Encoding?

  • Mail for Exchange - Polish letters

    Hello Everybody,
    I have problem with sending emails from E72 (M4E). Receivers are getting characters like:
    Żś ć ę ąinstead of polish letters. Other E72s haven't got such issue so it is strange for me.
    Does anybody know solution?. Thanks for any Ideas.
    Regards,
    marek

    I'm using 2 accounts as well, an explicit Gmail account installed via the setup wizard and an MfE account for contacts and calendar that doesn't sync mails.

Maybe you are looking for