Silencer with HS-980 and X-FI Titanium Pro

*Silencer with HS-980 and X-FI Titanium ProWHey guys and girls,
So I recently bought the Creative HS-980 Fatalty MKII headset in the hope to get better recording results on my PC because of the fans of the PC being loud. The headset comes equip with the ability to use Silencer.
After some fiddling (reinstalling drivers/programs etc) I did not get the required result. I don't hear any difference when enabling Silencer. Even the sound itself doesn't sound that right. So I guess something is wrong.
So does anyone know what I can try to resolve the issues to get the sound and Silencer to work? I do have the right soundcard (that being a X-FI Titanium Pro PCI-E). Also yes, I removed the stereo-to-mono jack before plugging it in.
Even the software itself is kinda weird because the Game-mode has the setting to use Silencer, but Entertainment-mode doesn't. Also missing the ability to use VoiceFX, though not sure this headset or soundcard supports it.
Drivers: 2.7.0007
Console launcher: 2.6.35
OS: Win 7 64 bit
Thanks for the assistance!

helped install the card in slot x6, interference gone. I think it's the same problem that the loss of sound with plug and unplug headphones on P67 motherboard. because it also helps to install card in the slot x6, but in this case, my video card operates in x8? mode. Please pass this information to creative Labs let them make a workable soundblaster x-fi Titanium card of the motherboards based on intel p67 chipset in x slots.

Similar Messages

  • Boot Camp problems with Windows 7, and a new Macbook Pro

    When I try to install Windows 7, when the process is almost complete and Windows is finalizing all settings, the system reboots then gets stuck at the white/gray bootscreen, and then tries to boot from disk, only to repeat the bootscreen cycle indefinitely. How do I fix this? Thank you very much.

    My MAC BOOK is 13 inch, first generation of unibody that I bought when it first came out last November, 2009. It seems that the latest boot camp 3.1 does not support windows7 64 bits on my mac book model. I followed Apple instruction to upgrade boot camp 3.0 when running XP 32 bits. And I then upgrade my XP 32 bits to 64 bit Windows 7. The upgrade/installation was successful but I encountered a lot of problems with the mouse and sound.
    1. No sound with my new Windows 7 64 bits.
    2. I managed to make Windows 7 64 bit recognize my apple mighty mouse. But the mouse does not funtion normal as expected. It does not work with swiping and scrolling.
    3. I could not re-install boot camp 3.0 from windows.old nor from the Mac OS X installation disk. When I tried to run setup.exe from the MAC OS X snow leopard, I got the error "Boot camp x64 is unsupported for this model"
    I am really disappointed that boot camp 3.1 is not universally supported for all mac book or mac book pro.
    I need help to re-install boot camp for my Windows 7? I bought the upgrade through education upgrade program and I selected to get 64 bit version so I do not want to rollback the installation to 32 bit.
    Please help.

  • LR3 - Questions regarding virtual copies with different exposures and Merge to HDR Pro in Photoshop

    Hello,
    I'm currently testing LR3. I have a master copy and 4 virtual copies with different exposures selected in LR3. I tought to myself that I could simply use the "Edit / In Merge to HDR Pro in Photoshop" option and tune the resulting HDR image in Photoshop but it seems that Photoshop doesn't take in consideration the exposure changes I've made on the virtual copies in LR3. The 5 images are identifical in the HDR Pro tool.
    Is there something I can do to about it ? Maybe there is a step I've forgot in my workflow or something ?
    Maybe I could simply export the master and virtual copies to JPEGs and then import these in the Photoshop HDR Pro tool but I don't think I would get the same results right ?
    Thank you for your help.

    Depending on the image ISO and overall content, you can get some pleasing DR pickup using this routine over simply hitting the fill light slider up and the exposure slider down.  I never really liked the PS approach since it seemed to require too much tweaking inside PS.  I have experimented with LR/Enfuse and Photomatix plug-ins and have settled on Photomatix for my HDR exposures (both "real" with multiple images and "fake" with a single image as you have described).  I think LR/Enfuse is donation ware so you might want to start there.  In both cases, the resultant image still needs a little adjusting back in LR after it is automatically imported into the Library.
    Jeff

  • I installed my new iMac with my Macbook Pro 2008 backup and created a network with the iMac and now the Macbook Pro cannot get internet.

    I installed my new iMac with my Macbook Pro 2008 back up.  I created a iMac network with Airport extreme, but now my Macbook Pro cannot get internet.  any ideas on why or what to do about it.

    Hello 1BillyMac,
    It seems you have a network conflict that isn't allowing your MacBook Pro to connect to the internet. This may be caused by both computers sharing identical network settings. You may want to consider creating a new network location on your MacBook Pro to assign new network settings. The following article will instruct you on how to do that:
    OS X Yosemite: Add a network location
    A network location is a group of network settings
    A network location is a group of network settings for your various network services (Ethernet or Wi-Fi for example).
    If you often change network settings, you may find switching between locations quicker and easier than repeatedly modifying individual groups of settings. 
    For example, you might want to make a location for “home,” where you connect to the Internet with a telephone modem, and a location for “office,” where you connect to your company network and the Internet using Ethernet or AirPort. 
    Choose Apple menu > System Preferences, then click Network.
    Click the Location pop-up menu, choose Edit Locations, then click Add . 
    Enter a name for the location, then click Done.
    Enter settings for each network connection service you want to use in that location.
    After you create your locations, you can switch all of your network settings by clicking the Location pop-up menu and choosing a different location.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • I cannot print anymore and get the message /usr/libexec/cups/backend/usb failed", with both imac and my mac book pro

    Today, after printing normally, wanted tp print another page with oki ES3640a3 and epson 7900 too.
    received the message that the printer stopped, and than
    "client-error-not-possible"
    and 
    "/usr/libexec/cups/backend/usb failed"
    can anyone help, I am a professional photographer and cannot miss the epson 7900.
    I received the messages on my imac OSx 10.5.8
    and my mac book pro OS Lion
    thanks

    Hi, did you restart the printers?
    Is there a stuck job in them?
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    Choose System Preferences from the Apple menu.
    Choose Print & Fax from the View menu.
    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."
       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • Assistance needed with SG300-10 and QNAP TS-459 Pro II Link Aggregation

    All,
    As the subject specifies, I have a pair of devices on a local network that I would like to play nicely together.
    My problem:
    If the TS-459 is configured for standalone (No Link Aggregation), then I can access the NAS via Ping, web interface, NFS, etc.. however, If I try enabling Link Aggregation, then I lose TCP/IP connectivity to it and must use QNAP's Finder utility to change Link Aggregation mode back to Standalone.
    What I'm asking is - has anyone here configured a QNAP NAS appliance with Link Aggregation enabled with an SG300 or similar?? If so, could you kindly provide a walk-through on the appropriate settings for each?
    My first attempts on the NAS side were to choose the "Balance-alb" (automatic load balance) and "Balance-tlb" (adaptive transmit load balance) - The QNAP_Turbo_NAS_User_manual_V3.4_ENG.pdf states that these two modes are for "General Switches", so I assumed they should work.. unfortunately, no luck for me..
    Next up, I tried the IEEE 802.3ad / Link Aggregation setting on the NAS, while the device was rebooting, I configured the two GB ports on the SG300 to be a LAG with LACP enabled. Unfortunately, this too did not work as I had hoped.
    I called QNAP support and of course they don't have an Sg300-10 to test with, but will test their TS-459 Pro II to confirm the Link Aggregation settings function as advertised. I hope to hear back from them later this evening. In the meantime, if anyone here has insight, it would be very much appreciated. The NAS and SG300 are for a home lab consisting of a pair of Dual-six core systems with 48GB of mem each for vSphere.
    NAS Details:
    Model: QNAP TS-459 Pro II
    Firmware: 3.4.4 (0718T)
    Drives: Seagate 2TB x4
    Switch Details:
    Model: Cisco SG300-10
    Firmware version active image: 1.1.0.73
    Thank you,
    Burke

    Hi Burke,
    You can use link-aggregation 802.3AD with the sg-300. Try to make the trunk in the sg-300 with LACP enabled (before you make the trunk, otherwise LACP is disabled and you will only be able to do so by deleting the trunk and add it again). Flow control is enabled in the sg-300 (altough i'm not sure if this is needed). I've got the sg-300 and the QNAP TS 439 pro II+.

  • How can I tell the differences between the new MacBook Pro with retina display and the old MacBook Pro with retina display by looking

    I'm just wondering the differences between the new MacBook Pro with retina display which was just released in October 2013 and the old MacBook Pro with retina display.

    Thank you for the reply! As you said they looked exactly the same, so I'm not able to tell the differences just by looking, right? I'm thinking to buy a new 13-inch MacBook Pro with retina display, but I'm not buying the MacBook in Apple Store, I'm buying it in other shops, how can know whether they are not selling me the old model of MacBook Pro with retina display?

  • Probs with k8t neo and radeon 9500 non pro

    Hi!
    I´m totaly new with amd and i got a msi k8t neo and a sempron 2800+ with 1gb memory and a saphire radeon 9500 non pro and the computer does not start with that graphiccard.The processor fan just spins up a bit then it dies. But with a gforce 5200 card the computer works fine. I have tryed the saphire card in my server with a P4 1,6ghz and on that motherboard it works just fine.
    Im from sweden so my english is not the best ;-)

    Quote from: qTj on 17-November-05, 20:25:05
    Yes i have tryed all those things. But my card works perfectly in 2 diffrent computers. So i dont think that the vidccard is broken.. But what do i know...
    Well you know that othergfx cards do work oin ur board, so I still say you RMA it, or swap if with another card that will work
    Quote
    "drulleförsäkringen"
    translates like "fools insurance", apperently in Sweden U get a refund when u buy something and wreck it 

  • New bag with asus p67 and x-fi titanium

    hi, I install tvtuner averTV 509 on my asus sabertooth p67 and when I try to see TV I saw the horizontal bands (interference)? making a couple of tests, I realized that the noise is x-fi titanium. When I enable onboar audio the?interference disappeared?. then I enable x-fi and I have interference again. Then I chang the tuner audio from PCI sound to line-in(x-fi) from tuner line-out the?interference disappeared?. Then I enable? "to listen to this device"? in windows 7 audio settings and I have interference again?.
    I try different tv tuners(aver tv 509 ,avertv 507, avertv MCE36 Plus compro? M5F?) and all of them have this interference .
    On my old mainboard P5KC on p35 chip all work OK. I concluded that this is another bug x-fi titanium with asus P67 mainboard
    ps I have windows 7 x64?

    helped install the card in slot x6, interference gone. I think it's the same problem that the loss of sound with plug and unplug headphones on P67 motherboard. because it also helps to install card in the slot x6, but in this case, my video card operates in x8? mode. Please pass this information to creative Labs let them make a workable soundblaster x-fi Titanium card of the motherboards based on intel p67 chipset in x slots.

  • My friend have new Macbook Air with OSX Mavericks and I have Macbook Pro with OSX Mountain Lion, Can I create a bootable maverick in pendrive from macbook air and perform a clean installation/update on my macbook pro with osx mountain lion?

    I have late 2012 edition Macbook Pro, I have a internet connection with does not run smoothly It gets disconnected and reconnects Thus I failed everytime when I update my OSX Mountain Lion to Mavericks in App Store. My friend just bought 2013 end Macbook Air whicch have OSX Mavericks pre installed.
    I was hoping if I can create a OS X version in pendrive from his laptop and use that to install and thuss also update OS on my Mountain Lion.
    Kindly explain me in detail how to perform this.
    I have already taken back up of all files and I am ready to total clean my laptop.
    And I want to update to Maverick so I can thus further update to upcoming OS X Yosemite.

    The Mavericks on the Air is probably machine specific since it came pre-installed, so it wouldn't work on your computer. See if your friend will let you access the App Store, where you can sign in using your Apple ID and download the installer. You can use this free program to copy the installer and update your computer.
    Bootable USB Flash Drive – Diskmaker X

  • Problem with Fader Banks and Channel in MCU PRO with Logic Pro X

    I purchased a Mackie Control Universal Pro earlier this week, and I have talked with Mackie support techs twice and they have not been able to help me. My problem is that everything seems to work well with Logic X talking with the MCU with the exeption that the Fader Banks function will not move left to channels 1-8, they are stuck at channel 9-16, and will move to the right on to 17-24 and so on,  but it doesnt move to 1-8 when the left fader bank motor is pressed.  However when you toggle tany channel 1-8 levers on the computer screen, the corresponding lever on the Mackie goes up and down,  but the reverse does not occur. The Mackie folks say this is a problem with Logic Pro X, not the MCU.  Perhaps they are correct,  because I still have Logic Express on my Mac and when I close Logic X and Open Logic Express the fader banks move perfectly from 1-8, 9-16, and so on as do the tracks.   My computer is update with Mavericks. 
    I would appreciate any help! I am not a techie, an old guy who used to record on 4 track computers, and want to get away from a mouse control,  but I'm going to take the Mackie MCU back if I cant get this straight,  I've spent a lot of time on this.  Help!

    thank you Pete in Denver,  I actually made some progress today, in setting up the control surface of the Logic Pro Control Surfaces Support Manual, around page sixteen gave me a partial answer.  I had the Mackie icon first, then the Logic Control,  and it said to drag and drop the preferred icon to the left or first place.  that solved my not being able to access channels 1-8, I was able to press the fader bank left button and - voila!.  so that saved my initial problem,  but I still have some issues in moving faders and banks in existing projects,  some tracks show up lit up in the tan colors others don't,  but that is probably due to the way i would move tracks around once I received tracks on drop box from a friend and created new tracks, and I changed a lot of the order of the tracks.  ANyway.  I did make progress.  Thanks!

  • Intermittant problems with slow motion and crash of Premiere Pro

    Many complain about Premiere Pro's instability.
    Since a couple of days I have the same problem. Every time I want to navigate from A to B, Adobe seems to either introduce a severe SLOW MOTION effect on it's own accord, that I never put in !!!, or it just CRASHES with an error message along the lines "Problem, Try again" or similar.
    This is utterly frustrating !!! I have been trying for over 6 hours today to get this remedied, but no luck.
    Looking back over the past days, the problems seem to have grown exponentially both in frequency and in duration.
    Of course, this is not about the program, but about the Premiere Pro Forums.
    Is there a 300-day refund period for Jives???
    I suggest you use that opportunity Adobe. This is

    OK, that makes sense.
    OS: Vista 64 Business
    Browser: Firefox 3.5.2 and IE 8.06
    Symptoms:
    1. The connection has been reset, try again. Often after 15 minute waits.
    2. Nothing happens, just waiting for Adobe and even after 30 minutes, still waiting.
    3. After posting, nothing happens. You press the post button, nothing for ages. You press Cancel, nothing.
    4. All other pages load without problems and are responsive.
    5. Top participants listing and most popular discussions are not displayed.
    Do you need further information?

  • Wee Problem with Parallels Desktop and the Westmere Mac Pros

    Just got my new Westmere 8-Core Mac Pro last Friday, and spent the last four days in agony.
    I used Migration Assistant to transfer over my accounts from my old Mac Pro, but it crashed hard -- so hard that I had to reformat the hard drive and do a clean install of the system. So I decided to do a clean install of all of my programs as well, and the Westmere crashed on the Parallels Desktop installation. And, again, it crashed so hard that I had to reformat the hard drive and do a clean install of everything all over again.
    Today, I read a review of the Westmere Mac Pros in Macworld (http://www.macworld.com/article/153704/2010/08/quad8_core_macpro_2010.html?lsrc=top2), and learned:
    We ran into a problem running Parallels on the Westmere-based Mac Pros, so we could not complete the Speedmark 6 suite of tests. When booted into 64-bit mode (as the new Mac Pros do by default) the systems would crash with Parallels installed. Booting into 32-bit mode would allow the systems to start up, but we still couldn’t use Parallels. We eventually tried a complete wipe and reinstall from the Mac Pro’s systems disc and downloaded the very latest version of Parallels to eliminate any other potential problems, and had the same issue. Apple and Parallels are aware of the problem and assure me that Parallels is working diligently on a fix. The application worked just fine on the new quad-core Mac Pro with the Nehalem processor.
    Hoped I saved somebody some time.

    Hi akapod,
    Looks like they may have the fix out.
    Mac Pro (Mid 2010): Kernel panic when installing or restarting Parallels Desktop 5 for Mac
    Please let me know if it's available and fixes it.
    Thanks,
    ivan

  • Problem with FW CS5 and my new Macbook Pro

    i own an MBP, i5, 4gb ram.
    FW performes quite slow. especially show/ hide edges, or switching to the prewiev mode lasts very long. about 10 sek. within this time the whole OSX dosnt work.
    i dont have this problems at any other adobe products.
    can anyone help?

    Here are a few links regarding the battery in your MBP:
    http://www.apple.com/batteries/notebooks.html
    http://support.apple.com/kb/HT1446
    http://support.apple.com/kb/TS1473
    Battery life is a function of how much you make the MBP work.  Games and video the battery resources get used up very quickly.  Text edit and email, you will approach the advertised figure, but probably never reach it.
    Ciao.

  • Ethernet configuration with SMC router and Titanium

    This concerns a Titanium Powerbook G4/500 and an SMC 2804WBR router.
    I plugged in a known-working Ethernet cable, and in System Preferences/Network, under Network Status for Built-In Ethernet, I got the message "The cable for Built-In Ethernet is not plugged in." A hardware test shows the Ethernet port to be functioning, but the TCP/IP tab, set for Using DHCP, shows no IP address, subnet mask, or router address. Renewing DHCP lease accomplishes nothing.
    I went to the Ethernet tab and set the drop-down to Manually (Advanced) instead of Automatic. With a little experimentation I found that 10baseT/UTP in either full- or half-duplex connects with the router and lets the machine go on the Internet, but 100baseTX will not. The router lights for link and 100baseTX go on, but no addresses appear in the TCP/IP tab.
    I use 100baseTX with a G4 and a Pismo Powerbook, so I know the router can work just fine at that speed using an Ethernet cable. Is there some glitch or weirdness peculiar to the original G4 Powerbook that won't allow it to communicate with the router at full speed? Is there some configuration through Terminal or elsewhere that will fix that?

    Hi,
    the PVDM is used when you E1/T1 interface. in your scenario you need to configure SIP trunk between your Voice GW and ISP.
    you need to confirm the below settings:
    Codec
    SIP sever ip address
    DTMF
    you will create voip dial-peer toward your ISP and another dial-peer toward your call manager.
    in this you are deploying CUBE. you need to configure
    voice service voip
          allow sip to sip
    don't forget to add CUCM and ISP in the trust list under voice service voip
    HTH
    Anas
    don't forget to rate the helpful posts

Maybe you are looking for