Silent blackouts

Our sys admins have been doing patches lately. The patching is causing OEM to send out alerts. To circumvent the problem, I added OEM blackouts to the shutdown/startups scripts, however I still get notifications that the blackout has started or stopped.
Is there a way to enable/disable blackout silently?
TIA

You should check the Notification Rule that you are using for this.
"Database Availability and Critical States" by default
and then go to the Availability tab
Here you have a checkbox for Blackout Started and Blackout Ended.
The checkbox should not be checked.
Something else, if you admin should use the OEM Provisoning and Autoamted Patching feature, this will be taken care of by default.
Regards
Rob
For more info on using OEM GC, you might want to check http://oemgc.wordpress.com

Similar Messages

Why Apple is silent about 4s wifi getting greyed out and not responding to this issue? many ppl suffer from this and this is absurd!

Why Apple is silent about iPhone 4s wifi getting greyed out with iOS updates 8.0.2 and 8.1 and did not respond to this issue officially? Many people are suffering from this affected service. How can you trust us to buy new iPhones when you stop supporting us with the ones we have since they are still upgradable to the latest iOS.
Is there any chance that we will be given the support and would this issue be fixed with any upcoming updates? My iPhone when its battery is drained totally and I start it again the WIFI works until I try to choose another network or somehow I disable it then blackout!
This is definitely a software issue that we never had problems before this update.
Show us that you care for your products at least and provide us with a solution please.

nartal wrote:
That doesn't help at all.. I can only have it enabled if the battery gets drained out totally then when I restart it the WIF is on. then back greyed out.. that is not a serious reply, really!
Yes, it's a serious reply. Did you actually read the information at the link I posted? Especially the last sentence? The fact that it appeared when you updated to iOS 8 has no bearing on the validity of the article. It is not specific to any version.

PSE 10 and Adobe CS6: When running silent install help is not working afterwards

Hello,
I'm not sure if this is the correct forum. If not: Please help me find the correct one.
I have a big issue with Adobe CS6 (and former versions like Photoshop Elements 10): When installing it from DVD running GUI everything is working fine afterwards. If I install e.g. Photoshop Elements 10 using "Silent Installation" help is not working afterwards. It states that it cannot locate the URL. I have not installed AIR and also do not plan to install it.
I have 'played' a little around with Common Files\Adobe\helpcfg and help directory. Now at least I do not get an error message but still it's not the online help which opens in the browser but the web page that is defined as 'home'.
The same I see now in Adobe CS6. I have e.g. packaged After Effects and Illustrator and when deploying it I'm not able to open help as well and I fear that this is the same issue.
Has anyone deeper knowledge about how "helpcfg" is working? Any example files? Any other help appreciated as well.
Kind regards
János

@hannilator Have you checked the exceptions folder contents for instructions on how to push to logged off computers? Here's what I get when I package CS6 (DesignWebPrem) and excude AIR/CHC:
After you have deployed the package, separately install the products in the exception folder.
IMPORTANT: Before you install the products in the exception folder, refer to the following Adobe Knowledgebase article for information on installing these products and configuring the settings correctly:
http://www.adobe.com/go/aamee_exceptions
NOTE: The installation commands provided below will work when the user is logged in to the client machine where the package is being deployed. For the scenario where the user is not logged in, prefix the following string to the command:
sudo launchctl bsexec `ps auwwx |grep [l]oginwindow | awk '{ print $2 }'`
As an example, here is the command to install "Adobe AIR" when the user is not logged in to the client machine (assuming Adobe AIR is part of the package):
sudo launchctl bsexec `ps auwwx |grep [l]oginwindow | awk '{ print $2 }'` Adobe\ AIR\ Installer.app/Contents/MacOS/Adobe\ AIR\ Installer -silent
###################################### Command to install Adobe Dreamweaver Widget Browser ######################################
Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer -silent -eulaAccepted -programMenu WidgetBrowser.air
###################################### Command to install AdobeHelp ######################################
InstallAdobeHelp appVersion=4.0.244 appId=chc pubId=4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 installerArg1=-silent installerArg2=-eulaAccepted installerArg3=AdobeHelp.air

I need to silently upgrade from 3.5 to 7 but get an error message after 7 install. Platform version 7.0 is not compatible with minVersion = 1.9.1

I'm trying to silently upgrade my environment to FF 7. I've gotten the silent install working great, it puts in my Proxy Server info, reassigns the home page and all that. But, the last version we pushed out was FF 3.5. If a user had that on their PC and they run the FF7 install, they get weird messages when clicking on the icon.
XULRunner: Error: Platform version '7.0' is not compatible with minVersion >= 1.9.1 maxVersion <=1.9.1
Another message they get is:
AutoConfigAlert:
Netscape.cfg/AutoConfig failed. Error: pref failed: [Exception... "Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.setBoolPref]" nsresult: "0x8000ffff (NS_ERROR_UNEXPECTED)" location: "JS frame :: prefcalls.js :: pref :: line 70" data: no]
This is on Windows XP

Do you have other virtualization or security software that might protect .ini and possibly other files in the Firefox program folder (C:\Program Files\Mozilla Firefox\) and prevent Firefox from updating them properly?
You need to do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

Looking for an app that allows a contact to ring even in silent mode

Has anyone come across an app yet that will allow the phone to still ring even in silent mode?
I want to be able to NOT hear any of the emails or texts at night when I go to sleep but at the same time, I want to be able to have the phone ring through from certain contacts - in case of emergencies from my parents or my son.
This seems like a pretty simple request.

there isnt an app, but if you want to spend $99 like i did, you can get the beta version of IOS 6. It has that exact feature built in! It only rings emergency contacts and also if someone calls multiple times in 3 mintues or less. Its a cool feature. With the $99, you get IOS 6 with all the new featues like maps etc... This isnt realeased to public untill fall.https://developer.apple.com/devcenter/ios/index.action

Auto / Silent install of Essbase 6.1.4.0 (Client)

Does anyone know/have the switch(es) for an auto or silent install (client side) for Excel Essbase Add-in version 6.1.4.0?Thank you,Blake

Hi,Install Shield has a silent option that allows to record the options that have to be selected by the user.You first have to launch the install with a record a setup.iss file by launcinh setup.exe /r (or -r)Then setup.exe /f1 with the location and name of the iss file will do the trick.Consult installshield.com knowldege base for more information (perform a search on setup.iss).Please be aware that depending on the OS the iss file may need to be different.EricPartake Consulting

HT201320 I have a new work email that works fine on my iPhone 5. However the tone and vibration do not work on my phone or iPad for this particular account? It is like it is on silent!! All the features are on for tone / vibration and nothing happens!!!

I have a web based new work email account from my Company that is working fairly well on my iPhone 5 and my iPad 4. However no matter what I do in the settings every email that comes in to both device comes in silent with no tone or vibration. Both devices are working fine and my other personal accounts are also working fine with Tones and Vibrations. I do not understand what is going on. I am on a loud Construction site all day and I need to have that working well. Can you help me out?

ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"

IPhone 5s with ios 8.2 - can't use touch function; must double tap each function key; can't shut down phone without a hard reset; every function results in a voice description even in silent mode.

I have a iPhone 5s and just installed the 8.0.2 ios. How do I stop getting audible descriptions of each action I take in silent mode? The Touch ID has ceased to function. The screen icons have to be double struck. I cannot scroll down past the first page of any screen. I must force a shut-down to turn the phone off. How do I fix all these problems?

Hello Gubus 2,
It sounds as though (no pun intended) VoiceOver is enabled on your iPhone. Pressing the Home button quickly three times should turn this feature off. Further information can be found in the iPhone user guide at the link below.
iPhone User Guide - Accessibility Shortcut
http://help.apple.com/iphone/8/
Cheers,
Allen

IPhone 6 silent/ringer switch not working

When I try to put my phone on silent by switching the button on the left hand side. It doesn't seem to do anything now?!?!
The button seems to work fine but its just not silent, I have tried just going into sounds and turning my ringer right down but you can still slightly hear it when it goes off.
Obviously this wouldn't be a problem normally just for times when I need it on but on silent - ie work etc.
Any ideas?

Two options
1. Get your phone looked at by Apple
2. Invoke Settings - General - Accessibility - Assistive Touch - you can turn the mute off or on from there

Iphone 6 ring/silent switch not working

The ring/silent switch on the left side of my iphone 6 is stuck in silent mode and when I try to switch it into ring mode it doesn't stick and just springs back down. Anyone else having this issue?

I am experiencing the same problem with my new iPhone 6 (16 GB, White-Champagne / Sprint).
The switch doesn't work as it should. (Silent or Ring Modes)
When switched the button doesn't change any setting.
Meanwhile at rare moments (has happened 2 times now) the phone quickly alternates between silent & ring modes (like back & forth 5 cycles within seconds) without any activation of switch or any function.
On hold as we speak with Apple tech agent though (1800MYAPPLE), the agent is escalating the problem to her senior tech supervisor we (the agent and I) are waiting for him/her. Will update with outcome shortly.

Problems performing silent install of CR XI Rel 2

We are using the instructions from the installation guide to perform a silent install by running the command
setup.exe ADDLOCAL=ALL EXCLUDEDOTNETFILES=1 EXCLUDEJAVAFILES=1 EXCLUDERDCFILES=1 CLIENTLANGUAGE=EN REBOOT=ReallySuppress PIDKEY=(actualKey) INSTALLDIR="C:\Program Files\Business Objects\Crystal Reports 11.5" /live c:\temp\cr_11.log /qn
The installation runs but fails at the end of the installation when attempting to put the shortcuts in the users or All users Start Menu with the error of MainEngineThread is returning 1603 (when under user ID) or MainEngineThread is returning 1604 (when under All Users). The installation is being run with an administrator access login ID, so access to either area should not be a problem.
The installation is on both Windows 2000 and XP pc's and the win32 directory of the msi installation files have been copied locally to the machine as part of the process to eliminate network lag.
Does anyone have any suggestions on how to get past this?

Check the readme and help files on how to.

Yoga 2 13 - Fan speed goes almost silent in tablet mode

I find that the fan generates too much noise on my Yoga 2 13 (not pro), even when the laptop is completely idle.
It seems that somehow the temperature threshold for triggering the fan is set a bit too low (same problem seen on the lenovo yoga first version)
However, I noticed that when I fold my Yoga into tablet mode the fan goes almost silent (which is awesome).
Am I the only one experiencing this issue ?
Is there maybe a way to set the fan speed in laptop, tent and stand mode at the same speed as in tablet mode ?
Any help would be greatly appreciated.
Regards,
Mat.

I was going to reccomend you use the Notebook fan control program, and I went to go find you a link for it. However, when searching for it, I discovered that the Notebook fan control program doesn't work for the yoga 2 13 although it does work for my yoga 13. It seems to be because the yoga 2 13 only has one fan while the yoga 13 has two fans. I'm not sure.
The best bet for you is to search around on forums to see if anyone has discovered a different program that works. I tried searching around but I couldn't find anything.
check at these two sites:
http://forum.notebookreview.com/ideapad-essential/755553-yoga-2-13-any-fan-control-software-works.ht...
https://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-2-13-non-Pro-Incredibly-loud-and-ru...

MacBook Air Mid 2013 - Random system blackouts

Hi,
I just got the latest MBA 2013 about 3-weeks ago.
I have been noticing quite frequent system blackouts with regards to the laptop.
By system blackouts, the system responds as if it had entered a sleep state and returns back to its wake state a few seconds later.
This problem happens quite randomly, sometimes even when I am simply just typing or surfing the web when it is firmly seated on a table.
Twice, it entered the blackout and the keyboard died, forcing me to reset the system entirely in order to resume normal functions.
I have check the web and some say that it is a problem with Mountain Lion that could be observed since 2012. Is this true? Or is it possibly a hardware sensor issue?
Thanks
David

A new Mac is in warranty for 1 year from the date of purchase.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare.
Best.

Disable calls with video silently in jabber 9.2.6

Hello,
My company just bought Jabber 9.2.6 and as an application packager I was selected to create a package that installs Jabber completely silently. I have no problems with the installation but they gave me instructions to select the "Never start calls with video" option and I cannot find how to disable this silently anywhere. I found that for previous Jabber version this was set in the jabber-config.xml file but I cannot find it anywhere in the 9.2.6 install. I thought this maybe was set through the registry but couldn't find any registry keys for this either. the only configuration files I see in Jabber install folder are "log4cxx.properties", "jabber-config-defaults", "jabber-plugin-config", "jabber-ui-config", "plugin-config" and "StartupHandlerConfig". I couldn't find anything about calls with video in these files. Does anyone have any idea on how to enable this "Never start calls with video" option in Jabber 9.2.6 please?

Hi Gabriel,
you should follow instruction from CUCM docs :
Migration of Cisco Jabber Video SettingsIn Cisco Unified Presence Release 8.x, the Always begin with video muted setting is configured in Cisco Unified Presence Administration under Application > Cisco Jabber > Settings. This setting is not migrated during the upgrade to the current release. In the current release, this setting is configured in Unified Communications Manager as a Cisco Jabber Enterprise Parameter called Never start call with video. The default value for the Never start call with video setting is False. If you want to configure calls to not start with video, you must set the Never start call with video value to True in theUnified Communications Manager Enterprise Parameter configuration window.
And from Jabber side you should set StartCallWithVideo parameter in jabber-config.xml.
In short:
Admin should set Never Start Call with Video parameter to True.
Admin should set StartCallWithVideo option to False in jabber-config.xml.
Regards,
Nebojsa

E72 problem to activate silent mode with 031.023

now it is very difficult to activate silent mode with the ctrl key !

I think this is not a bug, but a fix. In the previous FW it was TOO easy to switch to Silent mode and that would happen quite often by mistake (at least to me).
So I think that Nokia corrected this problem, but did not communicate properly with their customers....
2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

Silent blackouts

Similar Messages

Maybe you are looking for