Silent database creation won't configure OEM

Hi All,
Windows Vista 64-bit Oracle 11.1.0.7
I am doing a silent creation of the database which creates the database fine but the OEM - Web front end is not created. I have run netca to create a listener before database creation. Here is my exact syntax I am using from the command prompt:
dbca -silent -sysPassword oracle -systemPassword oracle -continueOnNonFatalErrors true -gdbName 11GORA01 -createDatabase -templateName Test11g -emConfiguration LOCAL -dbsnmpPassword oracle -sysmanPassword oracle
If I then use dbca to try & configure the database options there is an error saying there is no appropriate listener found. There is one thing I did notice that when I did lsnrctl status the database name was in lower case and using the dbca the message 'Configure additional components for database "11GORA01" - is in upper case. Not sure if this is the problem.
Any help would be fantastic
Thanks
Vic

Hi,
Silent database creation won't configure OEM
AFAIK, NO you have to configure separately.
Regards,
Taj

Similar Messages

  • JumpStartKit install hangs at 87% complete during database creation / instance configuration

    Hello folks, I'm wanting to evaluate Oracle WebCenter Portal 11.1.1.8 (huge improvement over 11.1.1.7, which I have already gave a quick try in the VDI provided by Oracle).
    So I found out about this Jump Start Kit, which installs each required piece once you've got a properly configured Linux environment. I had some fun with the prereqs but now that's all completed and I got SO EXCITED to make it past "STEP 4".
    So now I'm encountering the same issue during installation -- in STEP 6 of 22 Configuration of Database Instance (Completing Database Creation) it gets to 87% complete and then nothing seems to happen, it never gets beyond that point even if I wait 10 more hours:
    NOTE: I suspect my issue is not specific to the "Jump Start Kit", but rather it is something others have encountered during the Database creation/configuration step of the Oracle Universal Installer in general. And hopefully others have solved it.
    "/opt/oracle/portal" is my INSTALL_DIR ; I had launched the JSK installer with this command:
    ./runme INSTANCE_PASSWORD=apwd ROOT_PASSWORD=rpwd DOWNLOAD_DIR=/media/sf_Downloads/JSKfiles INSTALL_DIR=/opt/oracle/portal
    - The installer makes it this far, before it seems to get "stuck" -- even after many hours there is no change, HD is not doing anything, CPU stays at <5% usage:
    rtkit.main.JSKStarter - launchScript:172 - Tue Jun 10 15:41:38 MDT 2014: BEGIN STEP 6 of 22: Configuration of Database Instance. Estimated time is around 5 minutes. Please wait..
    10/06/2014 15:41:38.545 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 -
    10/06/2014 15:41:48.222 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Copying database files
    10/06/2014 15:41:48.413 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 1% complete
    10/06/2014 15:41:52.894 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 3% complete
    10/06/2014 15:41:52.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 11% complete
    10/06/2014 15:42:02.917 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 18% complete
    10/06/2014 15:42:32.920 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 26% complete
    10/06/2014 15:42:42.638 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 37% complete
    10/06/2014 15:42:42.640 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Creating and starting Oracle instance
    10/06/2014 15:42:48.568 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 40% complete
    10/06/2014 15:42:56.827 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 45% complete
    10/06/2014 15:42:57.357 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 46% complete
    10/06/2014 15:42:57.526 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 47% complete
    10/06/2014 15:42:57.627 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 48% complete
    10/06/2014 15:42:57.834 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 49% complete
    10/06/2014 15:44:42.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 54% complete
    10/06/2014 15:44:42.963 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 59% complete
    10/06/2014 15:44:43.036 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 60% complete
    10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 61% complete
    10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 64% complete
    10/06/2014 15:44:43.453 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Completing Database Creation
    10/06/2014 15:44:43.493 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 68% complete
    10/06/2014 15:44:43.510 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 72% complete
    10/06/2014 15:44:43.571 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 76% complete
    10/06/2014 15:45:01.516 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 87% complete
    I am using VirtualBox on Windows 7, I have tried it multiple times, first with the guest OS as Oracle Linux 6, and then Oracle Linux 5 (fun learning about updating the version of Java!).
    It always gets to the same point and then it just seems to do nothing -- no progress, but no error message on-screen (see log files below). But it seems to be using less than 5% CPU usage... and waiting 10 hours makes no difference.
    Based on what I found in tons of Google searching, I tried increasing my swap file, adding more memory and HD space (12GB RAM and 10GB sap and 20GB free hard drive space) but still nothing changed.
    In post #2 of this thread I will separately provide the logging details, which I hope will be helpful.
    Thanks in advance!
    Darren.
    PS: moderator, I attempted to create this thread in other Spaces because I did not know about this "Portal JSK" specific one -- was that why my thread was rejected? NO REASON WAS GIVEN. If that WAS the reason, I have to say that it will be nearly impossible for anyone who is able to help me to actually FIND this thread here because as I said I do not think it specific to ONLY the Portal JSK. (But I will post it only here just in case that's the reason for the previous rejections)

    First off, thank you very much for not just deleting the other 2 threads -- I intentionally created them in the other 2 spaces that MIGHT find a set of eyes that can help -- but in both I linked to THIS thread because this is the specific product. So this is the only place replies will be found therefore no "duplication" to worry about... but as I said this is likely not specific to PortalJSK since others on the internet have described a similar problem during the Oracle database installation.
    Second of all. here we go, the log contents...
    ...So in the hope that I could troubleshoot based on some error logging, I had a look inside "/opt/oracle/portal/db/OraInventory/logs/"...
    - "/opt/oracle/portal/db/OraInventory/logs/oraInstall2014-06-10_03-27-37PM.err" is empty (0 bytes),
    - "/opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-27-37PM.log" * (2.3MB) ends with...
    INFO: Terminating all background operations
    INFO: Terminated all background operations
    INFO: Successfully executed the flow in SILENT mode
    INFO: Finding the most appropriate exit status for the current application
    INFO: Exit Status is 0
    INFO: Shutdown Oracle Database 11g Release 2 Installer
    INFO: Unloading Setup Driver
    [eof]
    I am not sure of the value of the additional log files inside "/opt/oracle/run/logs/", here is what they contain...
    - all of the "/opt/oracle/run/logs/xyz_NofN.zip.unzip.out" files are empty (0 bytes).
    - "/opt/oracle/run/logs/install_commands.log" is tiny, it just has this:
    /media/sf_Downloads/JSKfiles/DB/database/runInstaller -invPtrLoc /opt/oracle/run/linux64/dborainst.loc  -ignoreSysPrereqs  -ignorePrereq -force -silent -waitforcompletion -responseFile /opt/oracle/run/linux64/db_generated.rsp
    /opt/oracle/portal/db/ohome/bin/netca /orahome /opt/oracle/portal/db/ohome /orahnam orcl /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /responseFile /opt/oracle/run/linux64/netca.rsp /silent
    /opt/oracle/portal/db/ohome/bin/dbca -silent -responseFile /opt/oracle/run/linux64/dbca.rsp  -sampleSchema true -oratabLocation ORATAB
    - "webtier_prereqs.log" and "ecm_prereqs.log" and "wcprereqs.log" all say that all tests passed.
    (Tests for HD and RAM space and swap size and # of processes etc. are all SUCCESS; and all required packages are installed and high enough version, etc.)
    - "/opt/oracle/run/logs/dbprereqs_log.txt" says this:
    Starting Oracle Universal Installer...
    Checking Temp space: must be greater than 120 MB.   Actual 8855 MB    Passed
    Checking swap space: must be greater than 150 MB.   Actual 4031 MB    Passed
    Preparing to launch Oracle Universal Installer from /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-26-23PM. Please wait ...[WARNING] [INS-13014] Target environment do not meet some optional requirements.
       CAUSE: Some of the optional prerequisites are not met. See logs for details. /opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-26-23PM.log
       ACTION: Identify the list of failed prerequisite checks from the log: /opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-26-23PM.log. Then either from the log file or from installation manual find the appropriate configuration to meet the prerequisites and fix it manually.
    - "/opt/oracle/run/logs/wls-install.log" is the most confusing, maybe this is the reason for getting "stuck"?
    2014-06-10 15:24:38,139 WARN  [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux32_jdk160_29b11.zip not found..
    2014-06-10 15:24:38,143 WARN  [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux_ia32_jrockit_160_29_D1.2.0-10_jdk.zip not found..
    2014-06-10 15:24:38,206 WARN  [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux32_jdk160_29b11.zip not found..
    2014-06-10 15:24:38,209 WARN  [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux_ia32_jrockit_160_29_D1.2.0-10_jdk.zip not found..
    2014-06-10 15:24:38,225 WARN  [home] com.bea.plateng.wizard.installer.silent.tasks.SilentBEAHomeTask - /opt/oracle/portal/fmw directory is not empty. Proceed with installation?
    2014-06-10 15:24:39,223 WARN  [ocmCredVerify] com.bea.plateng.wizard.installer.helpers.OCMInstallHelper - Failed test connection
    java.lang.reflect.InvocationTargetException
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at com.bea.plateng.wizard.installer.helpers.OCMInstallHelper.testConnection(OCMInstallHelper.java:92)
      at com.bea.plateng.wizard.installer.silent.tasks.OCMCredVerifySilentTask.execute(OCMCredVerifySilentTask.java:35)
      at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
      at java.lang.Thread.run(Thread.java:662)
    Caused by: com.bea.plateng.wizard.installer.helpers.OCMException: Connection failed in SSL peer verificaition.
      at com.bea.plateng.wizard.installer.helpers.OCMHelper.testSimpleConnection(OCMHelper.java:54)
      at com.bea.plateng.wizard.installer.helpers.OCMHelper.testConnection(OCMHelper.java:145)
      ... 8 more
    2014-06-10 15:24:39,228 WARN  [ocmCredVerify] com.bea.plateng.wizard.installer.silent.tasks.OCMCredVerifySilentTask - OCMInstallException:
    com.bea.plateng.wizard.installer.helpers.OCMInstallException
      at com.bea.plateng.wizard.installer.helpers.OCMInstallHelper.testConnection(OCMInstallHelper.java:96)
      at com.bea.plateng.wizard.installer.silent.tasks.OCMCredVerifySilentTask.execute(OCMCredVerifySilentTask.java:35)
      at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
      at java.lang.Thread.run(Thread.java:662)
    2014-06-10 15:25:49,347 INFO  [Thread-13] com.oracle.cie.domain.TemplateImporter - Domain Extension Successful!
    2014-06-10 15:25:49,350 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - close template
    2014-06-10 15:25:49,351 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: close template
    2014-06-10 15:25:49,351 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - read domain from "/opt/oracle/portal/fmw/wlserver_10.3/samples/domains/medrec-spring"
    2014-06-10 15:25:49,405 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: read domain from "/opt/oracle/portal/fmw/wlserver_10.3/samples/domains/medrec-spring"
    2014-06-10 15:25:49,405 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: update domain
    2014-06-10 15:25:49,406 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - close template
    2014-06-10 15:25:49,406 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: close template
    2014-06-10 15:25:49,743 INFO  [WizardController] com.bea.plateng.wizard.silent.tasks.LogTask - The installation was successfull!
    ^ ^ ^ BUT IT SEEMS TO END AS A "SUCCESS"!?
    - "install_setup.log" ends with the following -- and so does "JSKDownloader.log" (the "master log"? it contains basically what shows up on-screen)
    rtkit.main.JSKStarter - launchScript:172 - Tue Jun 10 15:41:38 MDT 2014: BEGIN STEP 6 of 22: Configuration of Database Instance. Estimated time is around 5 minutes. Please wait..
    10/06/2014 15:41:38.545 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 -
    10/06/2014 15:41:48.222 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Copying database files
    10/06/2014 15:41:48.413 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 1% complete
    10/06/2014 15:41:52.894 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 3% complete
    10/06/2014 15:41:52.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 11% complete
    10/06/2014 15:42:02.917 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 18% complete
    10/06/2014 15:42:32.920 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 26% complete
    10/06/2014 15:42:42.638 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 37% complete
    10/06/2014 15:42:42.640 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Creating and starting Oracle instance
    10/06/2014 15:42:48.568 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 40% complete
    10/06/2014 15:42:56.827 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 45% complete
    10/06/2014 15:42:57.357 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 46% complete
    10/06/2014 15:42:57.526 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 47% complete
    10/06/2014 15:42:57.627 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 48% complete
    10/06/2014 15:42:57.834 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 49% complete
    10/06/2014 15:44:42.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 54% complete
    10/06/2014 15:44:42.963 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 59% complete
    10/06/2014 15:44:43.036 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 60% complete
    10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 61% complete
    10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 64% complete
    10/06/2014 15:44:43.453 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Completing Database Creation
    10/06/2014 15:44:43.493 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 68% complete
    10/06/2014 15:44:43.510 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 72% complete
    10/06/2014 15:44:43.571 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 76% complete
    10/06/2014 15:45:01.516 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 87% complete
    * Here are the final 261 lines of "/opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-27-37PM.log"...
    INFO: Start output from spawned process:
    INFO: ----------------------------------
    INFO:
    INFO: SaveInvWCCE JRE files in Scratch
    INFO: oracle.installer.mandatorySetup property is set to false, so skipping the execution of additional tools
    INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
    INFO: Config Initialize JRE files in Scratch
    INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
    INFO: Copying Aggr XML for: Oracle Configuration Manager
    INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
    INFO: Copying Aggr XML for: HAS Common Files
    INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
    INFO: Copying Aggr XML for: Oracle Netca Client
    INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
    INFO: Copying Aggr XML for: Database Configuration and Upgrade Assistants
    INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
    INFO: Copying Aggr XML for: Oracle Enterprise Manager Console DB
    INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
    INFO: Copying Aggr XML for: Oracle Database 11g
    INFO: The Top level Aggreage File = /opt/oracle/portal/db/ohome/inventory/ContentsXML/ConfigXML/oracle.server.11_2_0_1_0.xml
    INFO: OUI_CAPlugIn is not found in XML
    INFO: no. of tools to supress: 0 for comp: Oracle Enterprise Manager Console DB
    INFO: cf session will be created for OH: /opt/oracle/portal/db/ohome/ TLAggr: oracle.server instancePath: inventory/ContentsXML/ConfigXML/
    INFO: cf session for OH: /opt/oracle/portal/db/ohome/ TL Aggr: [oracle.server] instancePath: inventory/ContentsXML/ConfigXML/
    INFO: aggr ref length : 6
    INFO: cf session hashcode: 620301082
    INFO: cf session saved with key: OraDb11g_home1 oracle.server
    INFO: cf session is ok
    INFO: created and saved cf session for oh: OraDb11g_home1
    INFO: passing params to cf
    INFO: Handling the storing of variables for aggr name  oracle.sysman.ccr
    INFO: This variable s_OPSNodeInfoString is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable b_createResponseFile is not added to the global context map
    INFO: This variable s_ps is not added to the global context map
    INFO: This variable s_oraName is not added to the global context map
    INFO: This variable s_ccrJarDestination is not added to the global context map
    INFO: This variable b_localInstall is not added to the global context map
    INFO: This variable b_doConfigCCR is not added to the global context map
    INFO: This variable b_ccrUpgrade is not added to the global context map
    INFO: This variable s_rspFilePath is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: for oracle.has.common no aggregate found by cf: no configuration
    INFO: Handling the storing of variables for aggr name  oracle.assistants.netca.client
    INFO: This variable s_swingallName is not added to the global context map
    INFO: This variable s_shareName is not added to the global context map
    INFO: This variable s_runtimeLib is not added to the global context map
    INFO: This variable s_runTimeJar is not added to the global context map
    INFO: This variable s_responseFileName is not added to the global context map
    INFO: This variable s_operatingSystem is not added to the global context map
    INFO: This variable s_netcfgName is not added to the global context map
    INFO: This variable s_netcahelpName is not added to the global context map
    INFO: This variable s_netcaUpgradeFlag is not added to the global context map
    INFO: This variable s_netcaClass is not added to the global context map
    INFO: This variable s_netCA_Args is not added to the global context map
    INFO: This variable s_netCAInstalledProtocols is not added to the global context map
    INFO: This variable s_netAPIName is not added to the global context map
    INFO: This variable s_ldapclnt9 is not added to the global context map
    INFO: This variable s_ldapclnt11 is not added to the global context map
    INFO: This variable s_ldapclnt10 is not added to the global context map
    INFO: This variable s_jreLocation is not added to the global context map
    INFO: This variable s_jreJarFile is not added to the global context map
    INFO: This variable s_jreJar is not added to the global context map
    INFO: This variable s_jewtName is not added to the global context map
    INFO: This variable s_installTypeForLaunchNETCA is not added to the global context map
    INFO: This variable s_icebrowserName is not added to the global context map
    INFO: This variable s_helpName is not added to the global context map
    INFO: This variable s_ewtcompatName is not added to the global context map
    INFO: This variable s_ewtName is not added to the global context map
    INFO: This variable s_ewtFile is not added to the global context map
    INFO: This variable s_ewtCompat is not added to the global context map
    INFO: This variable s_cfgMethod is not added to the global context map
    INFO: This variable s_caHelpZhTwJar is not added to the global context map
    INFO: This variable s_caHelpZhCnJar is not added to the global context map
    INFO: This variable s_caHelpPtBRJar is not added to the global context map
    INFO: This variable s_caHelpKoJar is not added to the global context map
    INFO: This variable s_caHelpJar is not added to the global context map
    INFO: This variable s_caHelpJaJar is not added to the global context map
    INFO: This variable s_caHelpItJar is not added to the global context map
    INFO: This variable s_caHelpFrJar is not added to the global context map
    INFO: This variable s_caHelpEsJar is not added to the global context map
    INFO: This variable s_caHelpDeJar is not added to the global context map
    INFO: This variable s_authAdaptors is not added to the global context map
    INFO: This variable ps_netCA_Args_OverRide is not added to the global context map
    INFO: This variable b_net8ServerInstalling is not added to the global context map
    INFO: This variable b_javavmIsInstalling is not added to the global context map
    INFO: This variable b_isWindows is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable b_cmanIsInstalling is not added to the global context map
    INFO: This variable b_anoIsInstalling is not added to the global context map
    INFO: This variable s_xmlparservLoc is not added to the global context map
    INFO: This variable s_ouiJlibDir is not added to the global context map
    INFO: This variable s_opsmJlib is not added to the global context map
    INFO: This variable s_ntwkTools is not added to the global context map
    INFO: This variable s_netjlibDir is not added to the global context map
    INFO: This variable s_netcahelpLocation is not added to the global context map
    INFO: This variable s_netcaJlibDir is not added to the global context map
    INFO: This variable s_netcaDocDir is not added to the global context map
    INFO: This variable s_netPropertiesFile is not added to the global context map
    INFO: This variable s_netCA is not added to the global context map
    INFO: This variable s_net8caFileToInstantiate is not added to the global context map
    INFO: This variable s_jre15Location is not added to the global context map
    INFO: This variable s_jlibDir is not added to the global context map
    INFO: This variable s_inventoryPrereqOui is not added to the global context map
    INFO: This variable s_emdwLibDir is not added to the global context map
    INFO: This variable s_caHelpDir is not added to the global context map
    INFO: This variable s_assistantJlibDir is not added to the global context map
    INFO: This variable s_JavaFlag is not added to the global context map
    INFO: This variable b_isOPS is not added to the global context map
    INFO: This variable s_windowsCommandLine is not added to the global context map
    INFO: This variable s_net8caExecutable is not added to the global context map
    INFO: This variable s_netcaUserDirArg is not added to the global context map
    INFO: This variable s_installTypeForNetCA is not added to the global context map
    INFO: This variable s_netcaSilentFlag is not added to the global context map
    INFO: This variable s_netCAInstalledProducts is not added to the global context map
    INFO: This variable s_netcaClasspath is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: ORACLE_HOME is not settable, hence not setting the value
    INFO: Handling the storing of variables for aggr name  oracle.assistants.server
    INFO: This variable s_operatingSystem is not added to the global context map
    INFO: This variable s_jreLocation is not added to the global context map
    INFO: This variable pn_dboffset is not added to the global context map
    INFO: This variable cs_swingName is not added to the global context map
    INFO: This variable cs_komodoName is not added to the global context map
    INFO: This variable cs_kodiakName is not added to the global context map
    INFO: This variable cs_jewtName is not added to the global context map
    INFO: This variable cs_iceBrowserName is not added to the global context map
    INFO: This variable cs_ewtcompatName is not added to the global context map
    INFO: This variable cs_ewtName is not added to the global context map
    INFO: This variable cs_baliShareName is not added to the global context map
    INFO: This variable b_orabaseContainsOrahome is not added to the global context map
    INFO: This variable b_isWINDOWS is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable sl_dbmaParameterListForIcon is not added to the global context map
    INFO: This variable sl_dbcaParameterListForIcon is not added to the global context map
    INFO: This variable s_xmlparservLoc is not added to the global context map
    INFO: This variable s_ouiJlibLocation is not added to the global context map
    INFO: This variable s_oratabLocation is not added to the global context map
    INFO: This variable s_opsmLocation is not added to the global context map
    INFO: This variable s_dbuaLocation is not added to the global context map
    INFO: This variable s_dbcaLocation is not added to the global context map
    INFO: This variable s_OracleBinLocation is not added to the global context map
    INFO: This variable s_dbcaInstLaunchFile is not added to the global context map
    INFO: This variable s_dbcaLaunchFile is not added to the global context map
    INFO: This variable s_dbmaLaunchFile is not added to the global context map
    INFO: This variable s_dbmaInstLaunchFile is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: ORACLE_HOME is not settable, hence not setting the value
    INFO: Handling the storing of variables for aggr name  oracle.sysman.console.db
    INFO: This variable s_sid is not added to the global context map
    INFO: This variable s_serverInstallType is not added to the global context map
    INFO: This variable s_platform is not added to the global context map
    INFO: HashMap added with the key oracle.sysman.console.db and an empty variable Vector
    INFO: Adding the variable s_obfOc4jAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_obfOc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_obfJtaAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_obfJtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: This variable s_nlsLang is not added to the global context map
    INFO: This variable s_emailServer is not added to the global context map
    INFO: This variable s_emailAddress is not added to the global context map
    INFO: This variable s_cfgtyperet is not added to the global context map
    INFO: Adding the variable s_JtaAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_JtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: This variable n_uploadInterval is not added to the global context map
    INFO: This variable localhost is not added to the global context map
    INFO: This variable b_launchTools is not added to the global context map
    INFO: This variable b_launchBrowser is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable b_centralConsole is not added to the global context map
    INFO: This variable USE_HTTP_PROXY is not added to the global context map
    INFO: This variable USE_DB_CONSOLE is not added to the global context map
    INFO: This variable SET_CONSOLE_MODE is not added to the global context map
    INFO: This variable SA_SETUP is not added to the global context map
    INFO: This variable OC4JLOC is not added to the global context map
    INFO: This variable NO_PC_MODE is not added to the global context map
    INFO: This variable LOGGING_LEVEL is not added to the global context map
    INFO: This variable JRE_HOME is not added to the global context map
    INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
    INFO: This variable ISQLPLUS_PORT is not added to the global context map
    INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
    INFO: This variable HOSTNAME is not added to the global context map
    INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
    INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
    INFO: This variable EMPRODVER is not added to the global context map
    INFO: This variable CONSOLE_MODE is not added to the global context map
    INFO: This variable CONSOLE_CFG is not added to the global context map
    INFO: This variable sl_oraclehomes is not added to the global context map
    INFO: This variable s_oc4jDir is not added to the global context map
    INFO: This variable s_oc4jAppsDir is not added to the global context map
    INFO: This variable s_jreHome is not added to the global context map
    INFO: This variable s_configcommand is not added to the global context map
    INFO: This variable b_isRAC is not added to the global context map
    INFO: This variable b_UNIX is not added to the global context map
    INFO: This variable OJSP_JAR_LOC is not added to the global context map
    INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
    INFO: This variable LDAP_JAR_LOC is not added to the global context map
    INFO: This variable JAVA_HOME is not added to the global context map
    INFO: This variable ISQLPLUS_HOST is not added to the global context map
    INFO: This variable EM_UIX_LOCATION is not added to the global context map
    INFO: This variable EM_REPOS_HOST is not added to the global context map
    INFO: This variable EM_PING_COMMAND is not added to the global context map
    INFO: This variable EM_OC4J_HOME is not added to the global context map
    INFO: This variable EM_EAR_LOC is not added to the global context map
    INFO: This variable EMDROOT is not added to the global context map
    INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: This variable s_launchBrowserClasspath is not added to the global context map
    INFO: This variable s_javapOracleHome is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
    INFO: passing params to cf done
    INFO: done saving info by cf
    INFO: This is a shared oracle home or remote nodes are null. No copy required.
    INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
    INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
    INFO: Checkpoint:Index file written and updated
    INFO: Checkpoint:Transfer of file done from remote node
    INFO: Adding iterator oracle.sysman.oii.oiif.oiifw.OiifwRootShWCDE
    INFO: Updating the global context
    INFO: Path To 'globalcontext.xml' = /opt/oracle/portal/db/ohome/install/chainedInstall/globalcontext
    INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
    INFO: Number of root scripts to be executed = 1
    INFO: isSuccessfullInstallation: true
    INFO: isSuccessfullRemoteInstallation: true
    INFO: Adding ExitStatus SUCCESS to the exit status set
    INFO: Completed setting up InstallDB
    INFO: Number of root scripts to be executed = 1
    INFO: Shutting down OUISetupDriver.JobExecutorThread
    INFO: Cleaning up, please wait...
    INFO: Dispose the install area control object
    INFO: Update the state machine to STATE_CLEAN
    INFO: All forked task are completed at state setup
    INFO: Completed background operations
    INFO: Moved to state <setup>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <setup>
    WARNING: Validation disabled for the state setup
    INFO: Completed validating state <setup>
    INFO: Verifying route success
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state finish
    INFO: FinishAction Actions.execute called
    INFO: Completed executing action at state <finish>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <finish>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <finish>
    WARNING: Validation disabled for the state finish
    INFO: Completed validating state <finish>
    INFO: Terminating all background operations
    INFO: Terminated all background operations
    INFO: Successfully executed the flow in SILENT mode
    INFO: Finding the most appropriate exit status for the current application
    INFO: Exit Status is 0
    INFO: Shutdown Oracle Database 11g Release 2 Installer
    INFO: Unloading Setup Driver
    ----------that is all----------
    re. PROCESSES/TASKS at the ending:
    Also I had a look in System Monitor and noticed there a TON of processes ("Sleeping") that show up in System Monitor at this time of "freezing" or "hanging" or whatever you want to call it (where nothing is visibly happening anymore).
    -The most recent shell script is "install_db_instance.sh" (not surprising) with Waiting Channel "do_wait".
    #!/bin/bash
    export JSK_DIR=${PWD}
    . $JSK_DIR/setup_env.sh
    export ORACLE_HOME=$DB_ORACLE_HOME
    export ORACLE_BASE=$DB_ORACLE_BASE
    echo ""
    #$DB_ORACLE_HOME/bin/dbca -createDatabase -templateName $JSK_DIR/General_Purpose.dbc -gdbName orcl -sid orcl -sysPassword $SCHEMA_PASSWORD -systemPassword $SCHEMA_PASSWORD -emConfiguration LOCAL -dbsnmpPassword $SCHEMA_PASSWORD -sysmanPassword $SCHEMA_PASSWORD -datafileJarLocation $DB_ORACLE_HOME/assistants/dbca/templates/ -storageType FS -datafileDestination $DB_ORACLE_DATA -responseFile NO_VALUE -characterset AL32UTF8 -obfuscatedPasswords false -sampleSchema true -oratabLocation ORATAB -recoveryAreaDestination NO_VALUE -silent
    echo "$ORACLE_HOME/bin/dbca -silent -responseFile $JSK_DIR/dbca.rsp  -sampleSchema true -oratabLocation ORATAB" >> $LOGS_DIR/install_commands.log
    $ORACLE_HOME/bin/dbca -silent -responseFile $JSK_DIR/dbca.rsp  -sampleSchema true -oratabLocation ORATAB
    cat $JSK_DIR/dbca.rsp | grep -v -i PASSWORD > $JSK_DIR/dbca_saved_no_passwords.rsp
    rm -f $JSK_DIR/dbca.rsp
    echo ""
    -Immediately after that is "java" with this Command Line:
    /opt/oracle/portal/db/ohome/jdk/jre/bin/java -DORACLE_HOME=/opt/oracle/portal/db/ohome [parameters] -DJDBC_PROTOCOL=thin -mx128m -classpath /opt/oracle/portal/db/ohome/assistants/dbca/jlib/dbca.jar:[otherJarFiles]:/opt/oracle/portal/db/ohome/dv/jlib/dvca.jar oracle.sysman.assistants.dbca.Dbca -silent -responseFile /opt/oracle/run/linux64/dbca.rsp -sampleSchema true -oratabLocation ORATAB
    -There are 7 named "oracleorcl" where the Command Line is simply "oracleorcl (LOCAL=NO)" or "oracleorcl (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))" -- Waiting Channel is "sk_wait_data".
    -There are 52 named "oracle" with various similar-looking Command Lines. The Waiting Channel for these varies: "poll_schedule_timeout", or "hrtimer_nanosleep", or "sys_semtimedop" (the 2 highest ProcessIDs -- aka most recent -- have this, with Command Line "ora_w000_orcl" and "xe_w000_XE").
    -There are 3 named "sqlplus", their Command Lines are "/opt/oracle/portal/db/ohome/bin/sqlplus -S -N" (the oldest 2), or "/opt/oracle/portal/db/ohome/bin/sqlplus" (the most recent) -- Waiting Channel is "pipe_wait".
    Message was edited by: DarrenAg (added PROCESSES/TASKS info)

  • Configure oem on oracle 10g

    Hi,
    I am trying to configure oem in 10..2.0.3 database, but it gives me the below error
    emca -config dbcontrol db -repos createIncorrect usage:
    oracle.sysman.emcp.EMConfigAssistant [options] [list of parameters]
    Options:
    -a :configure for an ASM database
    -b :configure for automatic backup
    -c :configure a cluster database
    -e <node> :remove a node from the cluster
    -f <file> :specify the file name that contains parameter values
    -h :help
    -m :configure EM for a central agent
    -n <node> :add a new node to the cluster
    -r :skip creation of repository schema
    -s :silent mode (no user prompts
    -x <db> :deletion of a SID or DB
    -RMI_PORT <port> :specify the RMI port for DB Control
    -JMS_PORT <port> :specify the JMS port for DB Control
    -AGENT_PORT <port> :specify the EM agent port
    -DBCONSOLE_HTTP_PORT <port> :specify the DB Control HTTP port
    The script will prompt for any required data that is not specified in a configuration file. The script always prompts for all required passwords. If you use a configuration file, the file may contain any of the following specifications, as shown, with the specified values correctly filled in:
    Parameters for single instance databases:
    HOST=<Database hostname>
    SID=<Database SID>
    PORT=<Listener port number>
    ORACLE_HOME=<Database ORACLE_HOME>
    LISTENER=<Listener name>
    HOST_USER=<Host user name for automatic backup>
    HOST_USER_PWD=<Host user password for automatic backup>
    BACKUP_HOUR=<Automatic backup hour in number>
    BACKUP_MINUTE=<Automatic backup minute in number>
    ARCHIVE_LOG=<Archive log>
    EMAIL_ADDRESS=<Email address for automatic notification>
    MAIL_SERVER_NAME=<Email gateway for automatic notification>
    ASM_OH=<ASM ORACLE_HOME>
    ASM_SID=<ASM SID>
    ASM_PORT=<ASM port>
    ASM_USER_ROLE=<ASM user role>
    ASM_USER_NAME=<ASM user name>
    ASM_USER_PWD=<ASM user password>
    EM_HOME=<Enterprise Manager ORACLE_HOME>
    DBSNMP_PWD=<Password for dbsnmp>
    SYSMAN_PWD=<Password for sysman>
    SYS_PWD=<Password for sys>
    Parameters for cluster databses:
    HOST=<Database Instance hostname>
    PORT=<Listener port number>
    LISTENER=<Listener name>
    ORACLE_HOME=<Database ORACLE_HOME>
    CLUSTER_NAME=<Cluster name>
    DB_NAME=<Database name>
    SERVICE_NAME=<Service name>
    HOST_USER=<Host user name for automatic backup>
    HOST_USER_PWD=<Host user password for automatic backup>
    BACKUP_HOUR=<Automatic backup hour in number>
    BACKUP_MINUTE=<Automatic backup minute in number>
    ARCHIVE_LOG=<Archive log>
    EMAIL_ADDRESS=<Email address for automatic notification>
    MAIL_SERVER_NAME=<Email gateway for automatic notification>
    ASM_OH=<ASM ORACLE_HOME>
    ASM_PORT=<ASM port>
    ASM_USER_ROLE=<ASM user role>
    ASM_USER_NAME=<ASM user name>
    ASM_USER_PWD=<ASM user password>
    EM_HOME=<Enterprise Manager ORACLE_HOME>
    DBSNMP_PWD=<Password for dbsnmp>
    SYSMAN_PWD=<Password for sysman>
    SYS_PWD=<Password for sys>
    Please suggest
    Regards

    it seems database install was not successful some binaries is missing in your OH.
    Can you check by installing another database

  • While Installation of 11g database creation time error ORA-28056: Writing audit records to Windows Event Log failed Error

    Hi Friends,
    OS = Windows XP 3
    Database = Oracle 11g R2 32 bit
    Processor= intel p4 2.86 Ghz
    Ram = 2 gb
    Virtual memory = 4gb
    I was able to install the oracle 11g successfully, but during installation at the time of database creation I got the following error many times and I ignored it many times... but at 55% finally My installation was hanged nothing was happening after it..... 
    ORA-28056: Writing audit records to Windows Event Log failed Error  and at 55% my Installation got hung,,,, I end the installation and tried to create the database afterward by DBCA but same thing happened....
    Please some one help me out, as i need to install on the same machine .....
    Thanks and Regards

    AAP wrote:
    Thanks Now I am able to Create a database , but with one error,
    When I created a database using DBCA, at the last stage I got this error,
    Database Configuration Assistant : Warning
    Enterprise Manager Configuration Failed due to the Following error Listener is not up or database service is not registered with it.  Start the listener & Registered database service & run EM Configuration Assistant again....
    But when I checked the listener was up.....
    Now what was the problem,  I am able to connect and work through sqlplus,
    But  I didnt got the link of EM and when try to create a new connection in sql developer it is giving error ( Status : failure - Test Failed the Network Adapter could not establish the connection )
    Thanks & Regards
    Creation of the dbcontrol requires a connection via the listener.  When configuring the dbcontrol as part of database creation, it appears that the dbcontrol creation step runs before the dynamic registration of the databsase with the listener is complete.  Now that the database itself is completed and enough time (really, just a minute or two) has passed to allow the instance to register, use dbca or emca to create the dbcontrol.
    Are you able to get a sqlplus connection via the listener (sqlplus scott/tiger@orcl)?  That needs to be the first order of business.

  • Problem during Database Creation of 8.1.7 in Linux7.2

    hello folks,
    i am having a problem in creating database of 8.1.7 in Linux7.2 RedHat.
    after successful installation,,and after even successfull listener configuration,,
    when database creation assistant is creating database; On 82%
    At "Initializing database"
    it comes::
    ORA-03114: not connected to ORACLE
    and if we keep on ignoring it ,then it comes:
    end of file communication channel.
    plz help me what i would do,,
    regards.

    Hi,
    seems that your oracle database went down. just check if oracle is running or not by using ps command.
    if its not running go to $ prompt and start the database either using sys or internal user i.e
    $svrmgrl
    connect internal
    $startup or startup force
    let me know the result.
    Yogi
    [email protected]

  • Oracle 9i installation hanging in "Clone Database Creation in Process"

    Hi all,
    I have been struggling in installing the 9i in my laptop.
    Here is my setup,
    OS: Windows Server 2003 Enterprise Edition SP2 in VMWare
    Database: Oracle 9i 9.2.0.1.0
    When it automatically comes to "Database Configuration Assistant", there are 4 steps.
    Copying Database files
    Initializing Database
    Creating and starting Oracle Instance
    Completing database creation
    The 1st 3 steps has been completed and the installation just hangs at the last step when the completion rate is 88%.
    Anyone got problem like this ?
    Here are the details I have so far for the DBCA during installation process,
    Listener Control complete.
    Listener start failed. Listener may already be running.
    Listener configuration complete.
    Default local naming configuration complete.
    Oracle Net Services configuration successful. The exit code is 0
    Since I am completely new to installing DB, please help me to get rid of this frustration.
    Thanks !
    Regards,
    Chris

    Capacity Planner 9.2.0.1.0
              Enterprise Manager Events 9.2.0.1.0
              Enterprise Manager Base Classes 9.2.0.1.0
              Required Support Files 9.2.0.1.0
              Enterprise Manager Installation Prerequisite Checks 9.2.0.1.0
              Utilities Common Files 9.2.0.1.0
              Enterprise Manager Quick Tours 9.2.0.1.0
              Oracle Display Fonts 9.0.2.0.0
              regexp 2.0.20.0.0
              Oracle OLAP Worksheet 9.2.0.1.0
              Oracle OLAP API 9.2.0.1.0
              Oracle Developer Server Forms Manager 9.2.0.1.0
              Oracle Intelligent Agent Base Component Files 9.2.0.1.0
              Oracle Internet Directory Client Common Files 9.2.0.1.0
              Sun JDK 1.3.1.0.1a
              Oracle Directory Manager 9.2.0.1.0
              Visigenics ORB 3.4.0.0.0
              Assistant Common Files 9.2.0.1.0
              Enterprise Manager Paging and OMS Common Files 9.2.0.1.0
              XML Parser for C 9.2.0.1.0
              Oracle Net Configuration Assistant 9.2.0.1.0
              Character Set Migration Utility 9.2.0.1.0
              Enterprise Manage Website Translated Files 9.2.0.1.0
              Oracle Net Manager 9.2.0.1.0
              Oracle Net 9.2.0.1.0
              Oracle Perl Interpreter 5.00503.0.0.0c
              Apache Web Server files 1.3.22.0.0a
              Oracle JDBC/OCI Driver for JDK 1.4 9.2.0.1.0
              Database Configuration Assistant 9.2.0.1.0
              Oracle JDBC/OCI Driver for JDK 1.2 9.2.0.1.0
              Oracle INTYPE File Assistant 9.2.0.1.0
              SQLJ Runtime 9.2.0.1.0
              Oracle JDBC/OCI Interfaces 9.2.0.1.0
              Advanced Queueing (AQ) API 9.2.0.1.0
              Oracle Caching Service for Java 2.1.0.0.0a
              Recovery Manager 9.2.0.1.0
              JSDK 2.0.0.0.0d
              Apache JServ 1.1.0.0.0g
              Oracle interMedia Java Client 9.2.0.1.0
              Oracle Java Layout Engine 2.0.1.0.0
              Oracle Administration Assistant for Windows NT 9.2.0.1.0
              Oracle XML SQL Utility 9.2.0.1.0
              SQLJ Translator 9.2.0.1.0
              Enterprise Login Assistant 9.2.0.1.0
              Oracle Services For Microsoft Transaction Server 9.2.0.1.0
              Enterprise Manager Paging Server 9.2.0.1.0
              Oracle Java Tools 9.2.0.1.0
              Oracle ODBC Driver 9.2.0.1.0
              Authentication and Encryption 9.2.0.1.0
              Oracle Wallet Manager 9.2.0.1.0
              Oracle Database User Interface 2.2.11.0.0
              Oracle SNMP Agent 9.2.0.1.0
              Oracle Provider for OLE DB 9.2.0.1.0
              Oracle Objects for OLE 9.2.0.4.4
              Oracle C++ Call Interface 9.2.0.1.0
              Oracle OLAP Cube Viewer 9.2.0.1.0
              Oracle OLAP CWM Lite 9.2.0.1.0
              Object Type Translator 9.2.0.1.0
              SQL*Plus 9.2.0.1.0
              Oracle Call Interface (OCI) 9.2.0.1.0
              SQL*Loader 9.2.0.1.0
              Secure Socket Layer 9.2.0.1.0
              Oracle Internet Directory Client 9.2.0.1.0
              Oracle Net Listener 9.2.0.1.0
              Advanced Replication 9.2.0.1.0
              Oracle Complete DSS Starter Database 9.2.0.1.0
              Oracle Complete OLTP Starter Database 9.2.0.1.0
              Oracle Starter Database 9.2.0.1.0
              Oracle Message Gateway Common Files 9.2.0.1.0
              Oracle Common Schema Demos 9.2.0.1.0
              Change Management Common Files 9.2.0.1.0
              Oracle UIX 2.0.20.0.0
              Oracle Help for the Web 1.0.7.0.0
              XML Class Generator for C++ 9.2.0.1.0
              XML Parser for C++ 9.2.0.1.0
              XML Parser for Oracle JVM 9.2.0.1.0
              XML Transx 9.2.0.1.0
              XML Transviewer Beans 9.2.0.1.0
              XML Class Generator for Java 9.2.0.1.0
              XSQL Servlet 9.2.0.1.0
              XML Parser for PL/SQL 9.2.0.1.0
              Oracle SQLJ 9.2.0.1.0
              Enterprise Manager Common Files 9.2.0.1.0
              Common Files For Generic Connectivity Using OLEDB 9.2.0.1.0
              Oracle SOAP Client 2.0.0.0.0a
              Oracle Workflow Manager 9.2.0.1.0
              Oracle Net Integration 9.2.0.1.0
              Oracle XML Runtime Components 9.2.0.1.0
              Enterprise Manager Database Applications 9.2.0.1.0
              Oracle SOAP Server 2.0.0.0.0a
              Oracle Database Demos 9.2.0.1.0
              Oracle Ultra Search Common Files 9.2.0.1.0
              Enterprise Manager Console 9.2.0.1.0
              Enterprise Manager Integrated Applications 9.2.0.1.0
              Enterprise Manager Client 9.2.0.1.0
              Database Workspace Manager 9.2.0.1.0
              Oracle interMedia Java Advanced Imaging 9.2.0.1.0
              Oracle interMedia Client Compatibility Files 9.2.0.1.0
              Oracle interMedia Java Media Framework Client 9.2.0.1.0
              Oracle interMedia Client Demos 9.2.0.1.0
              Oracle interMedia Web Client 9.2.0.1.0
              BC4J Runtime for Database 9.0.2.692.1
              Oracle Change Management Pack 9.2.0.1.0
              Oracle interMedia Annotator 9.2.0.1.0
              Data Management Services Common Files 9.2.0.1.0
              Oracle interMedia Common Files 9.2.0.1.0
              Oracle interMedia Image 9.2.0.1.0
              Oracle interMedia Audio 9.2.0.1.0
              Oracle interMedia Video 9.2.0.1.0
              Database Upgrade Assistant 9.2.0.1.0
              Oracle Intelligent Agent Config Tool 9.2.0.1.0
              Oracle Intelligent Agent 9.2.0.1.0
              PL/SQL Embedded Gateway 9.2.0.1.0
              Oracle HTTP Server Extensions 9.2.0.1.0
              Oracle eBusiness Management Extensions 9.2.0.1.0
              Oracle EMD Agent Extensions 9.2.0.1.0
              Oracle interMedia Client Option 9.2.0.1.0
              Oracle SOAP for JServ 2.0.0.0.0a
              MIcrosoft SQLServer(TM) Extensions 9.2.0.1.0
              Oracle Management Pack for Oracle Applications 9.2.0.1.0
              Oracle Windows Interfaces 9.2.0.1.0
              Export/Import 9.2.0.1.0
              Apache Configuration for Oracle XML Developer's Kit 9.2.0.1.0
              Oracle Tuning Pack 9.2.0.1.0
              Oracle Forms Extensions 9.2.0.1.0
              Oracle XML Developer's Kit 9.2.0.1.0
              Oracle Java Server Pages 1.1.3.1.0
              Oracle Diagnostics Pack 9.2.0.1.0
              Oracle Ultra Search Middle-Tier 9.2.0.1.0
              Oracle Dynamic Services Server 9.2.0.1.0
              Oracle Mod PL/SQL Gateway 3.0.9.8.3b
              Apache Configuration for Oracle Java Server Pages 1.1.2.3.0
              Oracle Text 9.2.0.1.0
              Generic Connectivity Common Files 9.2.0.1.0
              New Database ID 9.2.0.1.0
              Database SQL Scripts 9.2.0.1.0
              Generic Connectivity Using OLEDB - SQL 9.2.0.1.0
              Oracle HTTP Server 9.2.0.1.0
              XML 9.2.0.1.0
              Generic Connectivity Using OLEDB - FS 9.2.0.1.0
              iSQL*Plus 9.2.0.1.0
              Generic Connectivity Using ODBC 9.2.0.1.0
              Enterprise Manager Webserver Integration 9.2.0.1.0
              Reporting Framework 9.2.0.1.0
              Oracle interMedia Locator 9.2.0.1.0
              Oracle Management Server 9.2.0.1.0
              Oracle Ultra Search Server 9.2.0.1.0
              Oracle interMedia 9.2.0.1.0
              Oracle Trace 9.2.0.1.0
              Oracle9i Syndication Server 9.2.0.1.0
              Enterprise Manager Web Site 9.2.0.1.0
              Oracle Applications Extensions 9.2.0.1.0
              Oracle Intelligent Agent Extensions 9.2.0.1.0
              Oracle Programmer 9.2.0.1.0
              Migration Utility 9.2.0.1.0
              Oracle Enterprise Manager Products 9.2.0.1.0
              Oracle9i Development Kit 9.2.0.1.0
              Oracle Advanced Security 9.2.0.1.0
              Oracle JVM 9.2.0.1.0
              Database Verify Utility 9.2.0.1.0
              PL/SQL 9.2.0.1.0
              Oracle Database Utilities 9.2.0.1.0
              Oracle9i 9.2.0.1.0
              Oracle Net Services 9.2.0.1.0
              Oracle COM Automation Feature 9.2.0.1.0
              Oracle Data Mining 9.2.0.1.0
              Oracle OLAP 9.2.0.1.0
              Oracle Spatial 9.2.0.1.0
              Oracle Partitioning 9.2.0.1.0
              Enterprise Edition Options 9.2.0.1.0
              Oracle9i Database 9.2.0.1.0
    Starting to execute optional autolaunch configuration tools
    Launched configuration tool Oracle Net Configuration Assistant
    Command which is being spawned is C:\Program Files\Oracle\jre\1.1.8\bin/jrew.exe -Duser.dir=C:\oracle\ora92\network\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.8\lib\rt.jar;C:\oracle\ora92\jlib\ewt3.jar;C:\oracle\ora92\jlib\ewtcompat-3_3_15.jar;C:\oracle\ora92\network\jlib\NetCA.jar;C:\oracle\ora92\network\jlib\netcam.jar;C:\oracle\ora92\jlib\netcfg.jar;C:\oracle\ora92\jlib\help3.jar;C:\oracle\ora92\jlib\oracle_ice5.jar;C:\oracle\ora92\jlib\share.jar;C:\oracle\ora92\jlib\swingall-1_1_1.jar;C:\Program Files\Oracle\jre\1.1.8\lib\i18n.jar;C:\oracle\ora92\jlib\srvm.jar;C:\oracle\ora92\network\tools" oracle.net.ca.NetCA /orahome C:\oracle\ora92 /orahnam OraHome92 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp,tcps /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile C:\oracle\ora92\network\install\netca_typ.rsp
    Configuration tool Oracle Net Configuration Assistant succeeded
    Result code for launching of configuration tool is 0
    Launched configuration tool Oracle Database Configuration Assistant
    Command which is being spawned is C:\Program Files\Oracle\jre\1.1.8\bin/jrew.exe -DORACLE_HOME="C:\oracle\ora92" -DJDBC_PROTOCOL="thin" -classpath ";C:\Program Files\Oracle\jre\1.1.8\lib\i18n.jar;C:\Program Files\Oracle\jre\1.1.8\lib\rt.jar;C:\oracle\ora92\jlib\ewt3.jar;C:\oracle\ora92\jlib\kodiak.jar;C:\oracle\ora92\jlib\ewtcompat-3_3_15.jar;C:\oracle\ora92\lib\xmlparserv2.jar;C:\oracle\ora92\jdbc\lib\classes111.zip;C:\oracle\ora92\classes;C:\oracle\ora92\jlib\gss-1-1.zip;C:\oracle\ora92\jlib\oembase-9_2_0.jar;C:\oracle\ora92\jlib\srvm.jar;C:\oracle\ora92\assistants\jlib\assistantsCommon.jar;C:\oracle\ora92\jlib\share.jar;C:\oracle\ora92\jlib\swingall-1_1_1.jar;C:\oracle\ora92\assistants\dbca\jlib\dbca.jar;C:\oracle\ora92\jlib\help3.jar;C:\oracle\ora92\jlib\oracle_ice5.jar;C:\oracle\ora92\jlib\netcfg.jar;C:\oracle\ora92\lib\vbjorb.jar;C:\oracle\ora92\lib\vbjtools.jar;C:\oracle\ora92\lib\vbjapp.jar;" oracle.sysman.assistants.dbca.Dbca -progress_only -createDatabase -templateName General_Purpose.dbc -gdbName orcl -sid orcl -datafileJarLocation C:\oracle\ora92\assistants\dbca\templates -datafileDestination C:\oracle\oradata -responseFile NO_VALUE -characterset WE8MSWIN1252 -passwordDialog true Protected value, not to be logged

  • Database creation in oracle 8.0.4

    Hi,
    I'm creating a database in Oracle 8.0.4. I choose the custom option to give all the parameters. One of these parameters is the password of internal user. I give it as oracle. After giving all the other parameters and then click on finish to create the database, i get ORA-01017 error and i'm being forced to abort the database creation.
    After this error has occured, i've created another two databases with a different names and all went fine. I didnt have any problems while creating the databases. Again after the creation of the new databases, i tried to create the old database. Even then i got the same error.
    can anyone let me know what might be the reason for this and the solution to overcome this problem.
    Thanks in advance,
    Jaikanth V Garlapati.

    Found this in Oracle Doc,
    NLS_DATABASE_PARAMETERS is the one you set when you do Create Database.
    NLS_INSTANCE_PARAMETERS is the one you set in your spfile when you start instance.
    So if you didn't set NLS_INSTANCE_PARAMETERS in spfile, then instance will start with NLS_DATABASE_PARAMETERS
    And alter session will over write them all.
    It's not new behavior in 10.2.0.4
    ==============================================
    NLS Database Parameters
    When a new database is created during the execution of the CREATE DATABASE statement, the NLS-related database configuration is established. The current NLS instance parameters are stored in the data dictionary along with the database and national character sets. The NLS instance parameters are read from the initialization parameter file at instance startup.
    You can find the values for NLS parameters by using:
    NLS Data Dictionary Views
    NLS Dynamic Performance Views
    OCINlsGetInfo() Function
    NLS Data Dictionary Views
    Applications can check the session, instance, and database NLS parameters by querying the following data dictionary views:
    NLS_SESSION_PARAMETERS shows the NLS parameters and their values for the session that is querying the view. It does not show information about the character set.
    NLS_INSTANCE_PARAMETERS shows the current NLS instance parameters that have been explicitly set and the values of the NLS instance parameters.
    NLS_DATABASE_PARAMETERS shows the values of the NLS parameters for the database. The values are stored in the database.

  • Creation parameters not taking effect after database creation in 10.1.0.4

    I created a database using DBCA, changed the default nls settings, then finished the database creation.
    The alert log reports the parameters as different than the defaults
    However, when starting the instance, the nls parameters are only set at the instance level and not the database level.
    Has anyone seen something similar in 10.1.0.4?
    Thanks

    Found this in Oracle Doc,
    NLS_DATABASE_PARAMETERS is the one you set when you do Create Database.
    NLS_INSTANCE_PARAMETERS is the one you set in your spfile when you start instance.
    So if you didn't set NLS_INSTANCE_PARAMETERS in spfile, then instance will start with NLS_DATABASE_PARAMETERS
    And alter session will over write them all.
    It's not new behavior in 10.2.0.4
    ==============================================
    NLS Database Parameters
    When a new database is created during the execution of the CREATE DATABASE statement, the NLS-related database configuration is established. The current NLS instance parameters are stored in the data dictionary along with the database and national character sets. The NLS instance parameters are read from the initialization parameter file at instance startup.
    You can find the values for NLS parameters by using:
    NLS Data Dictionary Views
    NLS Dynamic Performance Views
    OCINlsGetInfo() Function
    NLS Data Dictionary Views
    Applications can check the session, instance, and database NLS parameters by querying the following data dictionary views:
    NLS_SESSION_PARAMETERS shows the NLS parameters and their values for the session that is querying the view. It does not show information about the character set.
    NLS_INSTANCE_PARAMETERS shows the current NLS instance parameters that have been explicitly set and the values of the NLS instance parameters.
    NLS_DATABASE_PARAMETERS shows the values of the NLS parameters for the database. The values are stored in the database.

  • Install hangs in "Clone Database Creation"

    I try to install Oracle 11g on my computer. The installation pass all the checks and completes installing the files, then go to "Oracle Database COnfiguration Assistant".
    In the "Database Configuration Assistant" dialog, it displays the progress bar to 46% and said "clone database creation in progress", and then the whole progress hangs for 8 hours without any changes. So I think the installer is dead.
    I shutdown the installer and computer. Then restart. Then stop all the Oracle services, then call the deinstall to deinstall everything, remove all the registry entries and installed files.
    I then restart computer and reinstall Oracle, but the installation hangs on the same progress again. I repeat this for several times. But always cannot complete the installation.
    I think maybe there are some problems in cloning the database, so I check the log file, which is appended in this article. One problem is that the creating time of the log is about 8 am, but when I wait to 16 pm, the progress is still hangs and the creating/updating time of the log file is still 8 am, means Oracle does not update for about 8 hours.
    The computer environment: Lenovo T500 laptop with WIndows XP(SP3) installed.
    Log file:
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0641: "EXECUTE" requires connection to server
    SP2-0640: Not connected
    Database closed.
    SP2-0640: Not connected
    Database dismounted.
    ORA-28056: Writing audit records to Windows Event Log failed
    OSD-792246492: Message 792246492 not found; product=RDBMS; facility=SOSD
    O/S-Error: (OS 1502) ??????????????????
    ORA-01081: cannot start already-running ORACLE - shut it down first
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0641: "EXECUTE" requires connection to server
    SP2-0640: Not connected
    SP2-0641: "EXECUTE" requires connection to server
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    ERROR:
    ORA-28056: Writing audit records to Windows Event Log failed
    OSD-216442576: Message 216442576 not found; product=RDBMS; facility=SOSD
    O/S-Error: (OS 1502) ?????????????????? ORA-28056: Writing audit records to
    Windows Event Log failed
    OSD-216442576: Message 216442576 not found; product=RDBMS; facility=SOSD
    O/S-Error: (OS 1502) ??????????????????
    specify password for SYS as parameter 1:
    specify password for HR as parameter 2:
    specify password for OE as parameter 3:
    specify password for PM as parameter 4:
    specify password for IX as parameter 5:
    specify password for SH as parameter 6:
    specify password for BI as parameter 7:
    specify INPUT metadata import file as parameter 8:
    specify INPUT database backup file for tablespace EXAMPLE as parameter 9:
    specify OUTPUT database file for tablespace EXAMPLE as parameter 10:
    specify OUTPUT log directory as parameter 11:
    Sample Schemas are being plugged in ...
    ERROR:
    ORA-28056: Writing audit records to Windows Event Log failed
    OSD-216442576: Message 216442576 not found; product=RDBMS; facility=SOSD
    O/S-Error: (OS 1502) ?????????????????? ORA-28056: Writing audit records to
    Windows Event Log failed
    OSD-216442576: Message 216442576 not found; product=RDBMS; facility=SOSD
    O/S-Error: (OS 1502) ??????????????????
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0641: "EXECUTE" requires connection to server
    SP2-0640: Not connected
    SP2-0641: "EXECUTE" requires connection to server
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    Edited by: 1006616 on 2013-5-18 下午3:08

    1006616 wrote:
    The event log problem is not fatal. It will popup a warning said cannot write into the event log, and I click "Ignore" to continue. But the installation still hangs at 46%. I try to purge the event log, and try again. The install will still hangs.
    ORA-28056: Writing audit records to Windows Event Log failed
    you are entitled to your opinion, regardless of how misguided it may be.
    You don't have to convince me, about your reality.
    If you want Oracle to install correctly, you need to make sure that NO errors get thrown.
    Only you can fix what is wrong on your system.

  • Database creation process hangs

    I am manually creating a database on Windows 2k3 server using Oracle 11 r2. Using the Database Configuration Assistant to create a database, the process hangs for hours.
    I figured out and triedthe following:
    1. I have attempted using the GUI tool more than once to create the database and each time it hangs.
    2. Using the scripts have been created using the with configuration tool, I manually attemped to create database. -- I have attempted more than once.
    3. The database creation process hangs while running the EXECRM.SQL file that is called by the CATPCNFG.SQL which is called by CATPROC.SQL which is called by CreateDBCatalog.sql
    3. The EXECRM.SQL file hangs on the following statement EXECUTE DMBS_RMIN.INSTALL;
    I'm not sure why the PL/SQL packag is hanging at this point. Any help is appreciated.
    Thanks,
    Sheila

    I was able to create the databases prior to installing Enterprise Manager Grid control. I deleted the databases to re-create so they would be registered with Enterprise manager. Once I install Enterprise manager the creation process hung. I have also installed Essbase and Oracle/Hyperion Enterprise Performance Management Suite on the server. I'm trying to do some research on these BI tools.
    I'm tempted to uninstall Essbase and the Hyperion producst along with Enteprise Manager and start from scratch to test to see if I can create a database without these other products.

  • Error while configuring OEM

    Dear all,
    While manually configuring OEM in my database with the command emca -config dbcontrol db in the directory $ORACLE_HOME/bin, I am facing the following error immediately
    $ORACLE_HOME/jdk/bin/java: No such file or directory
    db version 11g
    platfrom linux
    Pl help
    Regards,
    Charan

    Hi;
    While manually configuring OEM in my database with the command emca -config dbcontrol db in the directory $ORACLE_HOME/bin, I am facing the following error immediately
    $ORACLE_HOME/jdk/bin/java: No such file or directoryPlease be sure you source env file and echo $ORACLE_HOME return correct path
    Also see:
    How to create OEM 10g in EBS?
    How To Drop, Create And Recreate DB Control In A 10g Database [ID 278100.1]
    Problem - emctl start dbconsole Fails with Error OC4J Configuration issue OC4J_DBConsole__ not found [ID 555218.1]
    Regard
    Helios

  • Configuring OEM in oracle 9i version

    In oracle 10g we can use emca command to configure oem..
    is there any command to configure oem in 9i data base .

    Yasser, -prelim is feature of Sql*Plus 10g and latter.
    So as long you have any Sql*Plus 10g or latter version (ex. from client installation) and a valid net service name to connect to your 9i database you should be able to establish a "backdoor" connection.
    You can do the following:
    $sqlplus -prelim /nologand once you are in, just connect to the database using SYSDBA account
    SQL> connect sys/password@net_service_name as sysdba
    Prelim connection establishedCheers,
    Mihajlo

  • Database creation best practices.

    Hi,
    We are planning to setup new database, oracle-10G on Sun and AIX. It is a datawarehose environment.
    Can anyone please share me the documents which speaks about best practices to be followed during database creation/setup. I googled and got some douments but not satisfied with them, so thought of posting this query.
    Regards,
    Yoganath.

    YOGANATH wrote:
    Anand,
    Thanks for your quick response. I went thru the link, but it seems to be a brief one. I need a sort of crisp/summary document for my presentation, which speaks about:
    1. Initial parameter settings for an datawarehouse to start with, like block_size, db_file_multiblock_read_count, parallel server etc...
    2. Memory parameters, SGA, PGA (say for an sever with 10GB RAM).
    3. How to split tablespaces, like Large, small.
    If someone has a just a crisp/outline document which speaks about the above mentioned points, it will be grateful.
    Regards,
    YoganathYou could fire up dbca, select the 'data warehouse' template, walk through the steps, and at the end do not select 'create a database' but simply select 'create scripts', then take a look at the results, especially the initialization file. Since you chose a template instead of 'custom database' you won't get a CREATE DATABASE script, but you should still get some stuff genned that will answer a lot of the questions you pose.
    You could even go so far as to let dbca create the database. Nothing commits you to actually using that DB. Just examine it to see what you got, then delete it.
    Edited by: EdStevens on Feb 10, 2009 10:41 AM

  • Database creation scripts from a running RAC

    Hi all
    We have a two node Oracle 10g R2 RAC running on SLES 10 SP2 Itanium systems.
    We have 4 database instances running on the two nodes.
    I need to create database creation scripts for one of the databases. eg. the script should contain all current configuration of the database (i.e i dont want the script which would have been created at the time of creation of the database)
    Is this possible to achieve?
    thanks

    Hi,
    You can follow this steps to create yours scripts using notes below:
    Create Database Manually
    *How to create a RAC database using DBCA generated scripts from templates [ID 856783.1]*
    Create Database Service Manually
    *How To Configure Server Side Transparent Application Failover [ID 460982.1]*
    *10g & 11g :Configuration of TAF(Transparent Application Failover) and Load Balancing [ID 453293.1]*
    Regards,
    Levi Pereira
    Edited by: Levi Pereira on Mar 18, 2011 11:36 AM

  • RH2.1AS FireWire OCFS database creation issue

    I have 2 nodes configure with firewire device and ocfs. Firewire device mounted and oracm started on both node. Database creation looks fine from alert log file. When I try to startup from either node I got ora-0439: feature not enabled: Real Application Clusters. Is any one running into the same problem or just missing some step from my end?
    Garry

    I find the option 'Oracle9i Real Application Clusters' under Enterprise Edition Options. As long as OCM is running, I don't know why you wouldn't see it...
    Regarding gsd and srvctl: as far as I know they weren't deprecated or anything with 9.2.0.3. If there's something else you're supposed to use to start and stop nodes and/or the whole cluster I'd be interested to hear about it. Anyway, gsd and srvctl have been working fine, even after patching to 9.2.0.3.
    For what it's worth, we gave up on OCFS (for now). We're using RedHat Advanced Server 2.1 Developer's Edition, and the kernel update (2.4.20) from www.ocfs.org. We spent a lot of time trying to get OCFS 1.0.8 to work but were never fully successful. Most of the time we couldn't run OCM on more than one node. Occasionally it worked, but then Oracle would report strange IO errors at the system level. After we switched to using raw devices on the shared firewire drive everything worked perfectly. We're going to wait and see what further OCFS development brings...

Maybe you are looking for

  • TS3540 Iphone 4S won't sync with iTunes after update to 11.1.3

    I have updated all softwares on my Macbook Air 10.7.5, included the iTunes 11.1.3. Once i plugged my Iphone 4S IOS 7.0.3, iTunes wouldn't see it, recognize it or sync. Other iphones show up. What is up? HELP! It's driving me crazy! Thank you! Melanie

  • Sesion bean client not running with comand line

    This is a session bean client program created using Netbeans 5.0 and Sun Application Server 9. Everything is normal as long as you run the client application from Netbeans. I have been trying to run the .jar file (created by Netbeans) from the comman

  • Where can i download a mail server from

    Hi I'm trying to create a mail tool. my workplace uses lotus notes so i'm presuming thats why it doesn't work at the moment - i need a SMTP server. i get error messages of .. "MessagingException: Could not connect to SMTP host: xxxxx" "ConnectExcepti

  • Why is the iPad camera kit not supported by iPad?

    When I connect the camera connection kit to iPad a message appears "this accessory is not supported by iPad. It is the right cck for ipad1. I have tried switching iPad off and then back on with cck already connected. Any ideas?

  • Security on EJB

    Hi, I'm writing an application using architecture applet-servlet-EJB, can anyone help me on applying RDBMSrealm on my application?? I really don't have any idea!! Thanx in advance. Albert