Silent installation of Reader 7.0 in WXP

Hi folks,
is there a way to install Adobe Reader 7.0 without user interaction? I've seen this very nice tool called "Acrobat® Enterprise Installation Tool" (AEIT), but it seems to be designed only for previous versions.
Another tool was mentioned (InstallShield Tuner), but apparently not for version 7.
By the way, I would like to create a multi language installation where the user can choose the desired language (EN, DE, FR or ES) at program start.
Has anyone some hints for me?
Regards Bernd

Hi,
1) extract msi package from downloaded exe file - doubeClick on exe, after that browse your temp folder for msi file
2) you can start silent installation with:
msiexec /i yourPathToReader.msi /qb!
Regards
Dariusz

Similar Messages

Popup of reboot notification jumped out when silent installation of Adobe Reader.

Popup of reboot notification jumped out when silent installation of Adobe Reader , but I have used the arguement "/norestart"
Command line: AdbeRdr11000_zh_CN.exe /sAll /msi /norestart ALLUSERS=1 EULA_ACCEPT=YES
How to suppress it? Thanks !

This is what I found somewhere else
REBOOT="ReallySuppress"

Error in Silent Installation of Oracle Database 10g R2

Hi All,
I want to install oracle DB10gR2 through silent installation(through command) and got the following error druing the prerequesties checks...
Anyone can pl. let me know how to ignore tis error or continue with this installation as we normally do in GUI instllation.
chk d below log for silent installation ...
=================================================================
Performing check for Kernel
Checking kernel parameters
Checking for semmsl=250; found semmsl=250. Passed
Checking for semmns=32000; found semmns=32000. Passed
Checking for semopm=100; found semopm=32. Failed <<<<
Checking for semmni=128; found semmni=128. Passed
Checking for shmmax=536870912; found shmmax=33554432. Failed <<<<
Checking for shmmni=4096; found shmmni=4096. Passed
Checking for shmall=2097152; found shmall=2097152. Passed
Checking for file-max=65536; found file-max=52371. Failed <<<<
Checking for VERSION=2.4.21; found VERSION=2.4.21-4.ELsmp. Passed
Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=32768 - 61000. Failed <<<<
Checking for rmem_default=262144; found rmem_default=65535. Failed <<<<
Checking for rmem_max=262144; found rmem_max=65535. Failed <<<<
Checking for wmem_default=262144; found wmem_default=65535. Failed <<<<
Checking for wmem_max=262144; found wmem_max=65535. Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
Check complete: Failed <<<<
Problem: The kernel parameters do not meet the minimum requirements (see above).
Recommendation: Perform operating system specific instructions to update the kernel parameters.
=======================================================================
Performing check for GLIBC
Checking Recommended glibc version
Expected result: ATLEAST=2.3.2-95.27
Actual Result: 2.3.2-95.3
Check complete. The overall result of this check is: Failed <<<<
Performing check for TotalMemory
===============================================================
Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 496MB
Check complete. The overall result of this check is: Failed <<<<
Check complete: Failed <<<<
Problem: The system does not have sufficient physical memory to perform the install.
Recommendation: Increase the amount of physical memory available to your system before continuing with the installation.
===============================================================

Hi Pierre,
thats fine that I should nt contuinue the installation if the prerequisties isnt match
but my question is "if we are doing the same installation in GUI based then we have to select that failed components and verify it again, i.e. I select that failed component and retry it (that the same thing done by me) and its working perfectly..." and my installation is successfully completed with any errors.
So, how can I do the same thing through command line, IF I want to retry for the failed components?
FYI ...Log for kernel parameters, RPM and Memory...
==========================================================
Performing check for Kernel
Checking kernel parameters
Checking for semmsl=250; found semmsl=250. Passed
Checking for semmns=32000; found semmns=32000. Passed
Checking for semopm=100; found semopm=100. Passed
Checking for semmni=128; found semmni=128. Passed
Checking for shmmax=536870912; found shmmax=536870912. Passed
Checking for shmmni=4096; found shmmni=4096. Passed
Checking for shmall=2097152; found shmall=2097152. Passed
Checking for file-max=65536; found file-max=65536. Passed
Checking for VERSION=2.4.21; found VERSION=2.4.21-4.ELsmp. Passed
Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=1024 - 65000. Passed
Checking for rmem_default=262144; found rmem_default=262144. Passed
Checking for rmem_max=262144; found rmem_max=262144. Passed
Checking for wmem_default=262144; found wmem_default=262144. Passed
Checking for wmem_max=262144; found wmem_max=262144. Passed
Check complete. The overall result of this check is: Passed
Check complete: Passed
=====================================================
2) also the GLIBC is already higher version with me..then why it shown me as fail
Performing check for GLIBC
Checking Recommended glibc version
Expected result: ATLEAST=2.3.2-95.27
Actual Result: 2.3.2-95.3
Check complete. The overall result of this check is: Failed <<<<
=====================================================
3) Memory error
Performing check for TotalMemory
Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 496MB
Check complete. The overall result of this check is: Failed <<<<

Photoshop Elements 13 Silent Installation

Hi.
I am trying to do a silent installation of Photoshop Elements 13.
We can rollout single installations to specific computers with Enteo DSM (Client Management System).
When i assign an installation to a client, i have the possibility to give the serialnumber with the installationpackage as an variable.
This worked well with PSE10, PSE11 and PSE12.
But with Version 13 the installation routine changed completly. Are there any instructions to do an silent installation with PSE 13 ?
Cheers
Tobi

Shikha,
Silent install worked great but I cant get the adobeID to serialize. I used this for PSE 12 but it's not working on 13.
adobe_prtk --tool=Serialize --leid=V7{}PhotoshopElements-EMT13-Win-GM --serial="xxxx-xx...." --adobeid="[email protected]"
Do I have the right leid? I couldn't find any information on how to get the Adobe ID working.

Need help with a Silent Installer for Photoshop Elements 10

I can't seem to get the silent installer working. I've used the Elements 9 instructions for 10 but I still get pop-ups requesting info:
http://helpx.adobe.com/photoshop-elements/kb/silent-install-volume-license-photoshop.html
I cannot find any info at all relating specifically to Elements 10. Before I go digging into the msi with ORCA (preferable to have something I can deploy in Active Directory through GPO) I tought I'd ask here

@mtarggart
Delete the blank between /UL and 1033, and it will work. :-)
@Davide M, thanks a lot for your helpful article!
mtarggart wrote:
I've tried the above command and I keep getting prompted to select an Install Language. I'm trying to install this on Windows 7 x64 Enterprise. From an elevated command prompt pointed to the directory of the Elements install files (C:\PSE 10), this is what I am typing: start /wait setup.exe /UL 1033 /V"SERIALNUMBER=xxxx-xxxx-xxxx-xxxx-xxxx".
For the ones who want to use installation from a server share,
change "Setup.exe" by using \\Servername\Share\Setup.exe
and set \\Servername\Share to your Servershare.
The last thing I've been searching for was setting the right country
and stopping PSE from asking me which country I am living in.
Seems as if there was an additional switch e.g. "Country=244" for US.

Error 1719 during Office 2010 Silent installation

Hi,
I have created a logoff vbs script enforced through GPO for a silent installation of office 2010 SP. The main part of the script run the following command:
SetupCommand = ShareDir & "\x86\setup.exe /config " & ShareDir & "\x86\ProPlus.WW\config.xml"
ReturnValue = oShell.run(SetupCommand, 1, True)
installation files are located on a network share (permissions: full control for everyone)
The installation seems to work correctly until installation of updates when I get error 1719 Windows Installer service could not be accessed preceded by a warning event 1530:
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
2 user registry handles leaked from \Registry\User\S-1-5-21-682003330-507921405-725345543-4463:
Process 2760 (\Device\HarddiskVolume2\Windows\System32\msiexec.exe) has opened key \REGISTRY\USER\S-1-5-21-682003330-507921405-725345543-4463
Process 2760 (\Device\HarddiskVolume2\Windows\System32\msiexec.exe) has opened key \REGISTRY\USER\S-1-5-21-682003330-507921405-725345543-4463\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts
I've tried the script on 5 different hosts and I always get the same error. I've tried once to use the same script at logon and it worked.
If I run the command manually it works. Do you have any idea why the script is not working at logoff? do you have any workaround to suggest?

Hi Michele,
à
get error 1719 Windows Installer service could not be accessed
Please refer to following KB and check if it help you to troubleshoot Windows installer service issue.
How to troubleshoot issues with Windows installer service
Based on your description, I understand that you had configure logoff script via Group Policy to install office
2010. Meanwhile, you had confirmed that logon script will work fine if use same script. So, I guess the script should be correct, there seems to have some issues in Group Policy settings. Please refer to following articles and check relevant log files if find
more clues.
Fixing Group Policy problems by using log
files
Fixing Scripts policy settings problems
If anything I misunderstand or any update, please don't hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Unattended / silent installation

Hi,
I'm looking for a way to install Boot Camp 3.0 and the 3.1 update on Macs silently as a part of a Windows 7 (32- and 64-bit) deployment solution.
I know the BootCamp.msi (or BootCamp64.msi) can be silently installed, but what about the drivers?
Has anybody performed a successful, completely silent, installation?
Best regards,
Mikael Karlsson

Most MSIs support quiet install flags, call the msi from a batch script or directly from the command line with...
msiexec.exe /i "isntaller.msi" /qn
for an install with no user input. Have a look at msiexec.exe /? for more.

Oracle 9.2.0.1 Standard Edition Silent Installation using Response file

Does Oracle 9i Standard Edition come in 3 CDs??. I heard problems about providing response files to silent install Oracle 9.2.0.1 server.
I am about receive a licensed copy of Oracle 9i and I am looking at creating a response file for silent installation.
Is it necessary to copy contents of 3 CDs into one location on a harddrive on our users Server inorder for response file to work???
We will be installing Oracle 9.2.0.1 on Win2000 server.
I really appreciate any help.
Thanks

Hi,
I'm going to work on this subject in the next few weeks on a Oracle Personal v9.2.0.1.0.
I'll try to give you some informations if I can find something helpful for you.
Can you please tell me if you have some informations on your side.
Thanks.

Silent installation of Cloud agent 12c failed on a windows 2003 host

Hello All,
I've done multiple installations by silently installing the cloud agent 12c using a response file. However, the configuration portion failed on this one windows 2003 host.
Has anyone seen this? I've searched on metalink and see other problems like TZ, service already exists, incorrect PERL settings etc..but found nothing that helps so far.
In log file:
The action configuration is performing
The plug-in Agent Configuration Assistant is running
AgentConfiguration:agent configuration has been started
Validating OMS_HOST and EM_UPLOAD_PORT
Performing free port detection..
AgentConfiguration: Executing emctl deploy agent command...
AgentConfiguration:agent configuration finished with status = false
The plug-in Agent Configuration Assistant has failed its perform method
The action configuration has failed its perform method
In Agent Deploy log file:
value passed to dir splitC:/oracle/em/agent_inst
INFO: length of temp is2
INFO: Return value:C:
\/oracle/em/agent_inst
INFO: ** Agent Port Check completed successfully.**
INFO: ERROR: The
Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh
monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent
software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in,
if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-
in, view the plug-in deployment log C:\oracle\em\agent_inst\install\logs to check if the plug-in
configuration for the oracle.sysman.oh monitoring plug-in failed.
INFO:
INFO: perform - mode
finished for action: configure
INFO:
INFO: You can see the log file: C:\oracle\em\core
\12.1.0.3.0\cfgtoollogs\oui\configActions2013-12-23_11-07-08-AM.log
INFO:
INFO: C:\oracle\em>exit
/b 3
INFO: Plugin homes:
INFO: Plugin homes:
INFO: C:\oracle\em\core\12.1.0.3.0\oui\bin
\runConfig.bat ORACLE_HOME=C:\oracle\em\core\12.1.0.3.0 RESPONSE_FILE=C:\oracle\em\core
\12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML=
{oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
SEVERE: ERROR: Agent
Configuration Failed
SEVERE: ERROR: Agent Deployment Failed

Thanks for the reply Rahul.
I've used that same response file for deployments on other servers without any problem.
See response file below: (note i've changed the server name)
## copyright (c) 1999, 2012 Oracle. All rights reserved.          ##
## Specify values for the variables listed below to customize     ##
## your installation.                                             ##
## Each variable is associated with a comment. The comment        ##
## identifies the variable type.                                  ##
## Please specify the values in the following format:             ##
##         Type         Example                                   ##
##         String       "Sample Value"                            ##
##         Boolean      True or False                             ##
##         Number       1000                                      ##
##         StringList   {"String value 1","String Value 2"}       ##
## The values that are given as <Value Required> need to be       ##
## specified for a silent installation to be successful.          ##
## This response file is generated by Oracle Software             ##
## Packager.                                                      ##
RESPONSEFILE_VERSION=2.2.1.0.0
#OMS_HOST:<String> OMS host info required to connect to OMS
#EM_UPLOAD_PORT:<String> OMS port info required to connect to OMS
#AGENT_REGISTRATION_PASSWORD:<String> Agent Registration Password needed to
#     establish a secure connection to the OMS.
#AGENT_INSTANCE_HOME:<String> Agent instance home is the location of agent state directory.
#AGENT_PORT:<String> Agent port on which the agent process should be started.
#b_startAgent:<boolean> Agent will not be started after configuration if the value specified is false.
#ORACLE_HOSTNAME:<String> Fully qualified domain name of host where is the agent is deployed.
#s_agentHomeName:<String>Customized Oracle home name for the agent home. Example: s_agentHomeName="agent12gR1"
OMS_HOST="omshost.company.com"
EM_UPLOAD_PORT="1159"
AGENT_REGISTRATION_PASSWORD="complicatedpassword"
AGENT_INSTANCE_HOME="e:/oracle/em/agent_inst"
AGENT_PORT="3872"
b_startAgent=true
ORACLE_HOSTNAME="targetserver.company.com"
#s_agentHomeName=<Value Unspecified>
#s_agentSrvcName:<String> Sets the agent Service Name and this variable can be
#      used to overrite the agent service name calculated by the install. This is
#      required for only Windows.
#      Example:
#      s_agentSrvcName = "GridAgent"            ; User specified value
#s_agentSrvcName=""
#Please Don't change the values of these variables
#EM_INSTALL_TYPE:<STRING> install type
EM_INSTALL_TYPE="AGENT"

Integration 10g silent installation will not install WebLogic Workshop

Hello,
I am attempting a silent installation, using wli10gR3_win32.exe. I have created a silent.xml using the information on this page: http://download.oracle.com/docs/cd/E13214_01/wli/docs85/install/silent.html.
I have used that page in the past to successfully create silent installations for versions 8 and 9 of Weblogic, but for version 10g it is not quite working as advertised. I have not found instructions for a silent installation for 10g.
My silent.xml file contains the following line:
<data-value name="COMPONENT_PATHS" value="WebLogic Server|WebLogic Workshop|WebLogic Integration|WebLogic Portal" />
When I run the package with this line, an error is produced in the log file stating that WebLogic Workshop cannot be found.
When I remove the WebLogic Workshop part of the line then Server, Integration, and Portal all install without errors. Unfortunately, Workshop was requested as well.
When I run the installation manually, I am offered Workshop as one of the products.
If somebody can point me to the correct installation documentation or provide the correct syntax for the silent.xml file that would be swell.
thanks.

Hi,
I had faced the same issue today, So I had removed workshop and the installation was successful. But the weird thing is after the installation I could see the "workshop" was installed under BEA_HOME.
Did any one face the same issue?
Thanks.
Vijay Bheemineni.

10gAS Silent Installation on Red Hat Linux AS 3.0

Silent installation on RHL AS 3.0 fails with Error : Packages version not per Installation requirement.
OUI is erroring out on gcc, compat-* packages. These packages on my machine are more recent than than the one required by the installer.
The install completes successfully if i skip the warning in interactive mode. Does any one know of any flag or environment variables that would skip the package check and proceed with silent installation?
Thanks

I use a little script which says:
echo Y | {path}/runInstaller -responsefile {path}/my.rsp
This echoes the mandatory Y into runInstaller.

Oracle Client 11g Release 2 silent installation.

Hi, I try to make a silent installation of oracle client 11g release 2 for windows 7 enterprise edition.
I'm familiar with the response file, and how to create this in earlyer versions.
But the "-record -destinationFile <filepath>" switch do not work, and when I run "setup -help" the -record switch is gone.
How do you create a response file with 11g release 2?
Best regards
Lansti

Hey Hans - We shouldn't have to read the manual each time a new installer comes out...why would there be a need to constantly redo how the installers works from a general standpoint (like -record)?? Stupid doesn't even begin to describe it.
Edited by: user10051782 on Jun 2, 2010 1:07 PM

Adobe Air installation status issue via silent installation

I installed adobe air silently, then installed an adobe air applicaiton silently. Everything works, and I can launch the application. However, if I use the status check via air.swf file it has the "available but not installed" and it can't retrieve the version of my air application. Once I double click on "any" .air file, it launches the non-silent installer, and I don't have to even install or update the app, just lanching the iapp nstaller non-silently seemed to correct something. From then on air.swf statu now returns "installed" and it can read the version of my app. Can anyone tell me what's going on and how can I correct this?

Ok, I understand. So before we continue, we really need to figure out what the exact error is. Can you, on at least 2 systems, generate the MSI logs we'll need? Here's a document that explains how to enable logging and where to find the logs once they've been created:
How to enable Windows logging
Once you've enabled logging, try installing again. Grab the newly created msi logs and either post here or email me at [email protected] I'll examine the logs and see if we can find a common issue between the systems.
Thanks,
Chris

Silent installation and adobe air message

Hi all,
i hope anybody can help me here.
I have create a cs4 silnet package. The silent installation is running well only the adobe air message appears a view times during the installation and i have allways to klick to "ok"
Adobe AIR
This application requires Adobe AIR to function.
Please download the latest version of the runtime from http://www........ and so on
I just want to dsiable all messages
I tried with 10.5 and 10.4 Mac OS X

nobody who can help me here?

Silent installer simply doesn't work

I downloaded the AIR_Win_installer_files.zip file in order to do a side-car AIR installation. I created a directory (AIR_bundle) and unzipped the downloaded file into that. In that directory, I end up with:
Adobe AIR Installer.exe
Adobe AIR/
where the latter is a sub-folder containing lots of other files. On the command-line, I execute the exe file passing only the -silent option, and I get an error dialog that says:
This application requires a version of Adobe AIR which cannot be found. Please download the latest version of the runtime from http://www.adobe.com/getair, or contact the application author for an updated version.
Why? FYI: there is no AIR installed on the computer at all (which should be OK since I'm trying to install it using the silent installer).

Hi Folks,
Restarting an Adobe AIR Application is not working during Silent installation.
If I install testapp.air(which has following code) on a machine that already has Adobe AIR installed on it and I click on
   the 'Restart' button in the testapp it works fine. (The app is closed and restarted and the window reopens)
import mx.core.Application;
import mx.core.WindowedApplication;
import adobe.utils.ProductManager;
public function reStart():void
    var app:WindowedApplication =
        WindowedApplication(Application.application);
    var mgr:ProductManager =
        new ProductManager("airappinstaller");
    mgr.launch("-launch " +
        app.nativeApplication.applicationID + " " +
        app.nativeApplication.publisherID);
    NativeApplication.nativeApplication.exit(0);
Now, we have a need to bundle Adobe AIR with our app and install Adobe AIR in 'silent' mode. I followed the directions in the Adobe
AIR bundling agreement and used the following command to install it:
testappInstaller.exe -silent -eulaAccepted -location "C:/Program Files/" -desktopShortcut testapp.air
If I do this, when I click on the 'Restart' button it does NOT restart the application. The issue seems to be related to installing
Adobe AIR in silent mode.
I would greatly appreciate any assistance Adobe is able to provide for this issue.
-Dhamu

Silent installation of Reader 7.0 in WXP

Similar Messages

Maybe you are looking for