Silent startup for 2600 Classic

Is there any way to prevent my Nokia 2600 Classic from playing an infurating tune every time I turn it on? I've managed to find set-up functions to eliminate other annoying noises, such as the bip every time I press a key, but failed to find a way to turn off the start-up tune.
I really don't understand why modern gadgets feel the necessity to make noises every time they do something. I would like to be able to turn my phone on, for example to check messages, in quiet places without disturbing the peace. My old phone did at least confine itself to a relatively innocuous bip, but this new one seems determined to break into song every time. It's driving me up the wall.
Keith (Grumpy Old Man).

I've still not got to the bottom of this. The only time I managed to get my phone to come on without making a noise is when I selected the "Silent" profile. Unfortunately it didn't ring for incoming calls either. I therefore edited the Silent profile, changing "Incom. call alert:" from "Off" to "Ringing". That made it ring for incoming calls but also caused the silly tune to come back when I turn the phone on. Grrrr!
Within each profile, if I choose to edit the profile I get the following options which I can change (my current selection for "General" profile is in brackets):
Incom. call alert: (Ringing)
Ringing tone: (Nostalgia.mp3)
Ringing volume: (Two bricks coloured in)
Vibrating alert: (Off)
Msg. alert tone: (Beep once)
Mail alert tone: (Off)
IM alert tone: (Off)
Keypad tones: (No bricks coloured in)
End of list tone: (Off)
Alert for: (All calls)
Other tones: (Off)
App tones: (Off)
Nothing in there about start-up tones. What is "IM alert"?
I still cannot find a way to set it up so there is no sound (or minimal sound - a short beep would be acceptable) at switch-on but it still rings when someone phones me.
Any suggestions?
Keith

Similar Messages

Silent Camera for Nokia 6220 Classic!?

Greetings from Helsinki Finland!
Please is somewhere available a silent camera for Nokia 6220 Classic?
This 5 mb camera is great but it makes so horrible noice that it is impossible to take great photos while e.g. my puppy starts to follow that sound and stops playing!
It is no way to make this camera silent in this phone, but I know that a good program download would solve this problem.
Where might I download one?
Thank you so much! =)
Jasima

Looks like they have disabled the ability to turn off camera sounds by disabling the warning tones. There are other solutions, but they also invalidate your warranty, hence we can't discuss them here.
Have a look at this link. The same applies in lots of other countries and the list gets longer by the day.

Nokia 2600 Classic Latest Software Version

Hi,
I have Nokia 2600 Classic. It is RM-340 and the version is 6.82.
I have heard that there is a latest version, i.e, 7.60.
So, what's new in 7.60?
And, the current version that i have (v6.82) doesn't show time in main screen with keypad locked (with security key) and is in silent with a new message (Having a bigger display than Nokia 6030 or Nokia 2626, Nokia 2600 classic can display the other icons in the next line). And, the calender tone is default set to ascending. Are these any bugs?
And, i want all the Indian Languages to be retained in the new version (v7.60).
Waiting for reply.
Bye,
PRAVARDHAN

I notice they fix the screensaver bug. Now when you choose "always" option, the screensaver realy stays always!
Nokia 5320 XM Red v4.13

Using a uk tesco sim, with a french 2600 classic? ...

FROM FRANCE, not UK,
I just tried an old Tesco sim (from an ancient Brit cellphone, both dating around 2003-5)
in my french, new Nokia 2600 Classic. This old sim has lasted vey well - and still has £2 + credit to use.
It seems to work - more or less (I have to put a country code on ALL numbers - for France too)
It picks up BT - and then - Bouygues fr.
Id like to top it up and carry on with it - in the new phone - but I do not know if there are likely to be probs with it.
Does anyone have any thoughts on that?
Thanks for reading my Q;!!:womanvery-happy:
H.
Solved!
Go to Solution.

No problem

Nokia 2600 Classic calendar synchronising with Nov...

I have been successfully using the sync capability for a year or so on the version of pc suite prior to Ovi, for managing my calendar appointments (using Novell Groupwise) on my pc then uploading to my phone Nokia 2600 Classic.
Now that I have downloaded the Ovi suite to my phone, the synchronising no longer works, although all other elements of the software works ok.
Can anybody offer any advice?
Regards
Frostywasp

10-Aug-2008 01:29 PM
outsider wrote:
Hi all,
just to follow up on this issue, I thought some might like to know I've been in touch with the novamedia.de support team. They sent a new version of the plugin, and now I have calendar syncing via bluetooth working (like a charm). However the contacts syncing is still one-way only, from the phone to the computer. Will post here when (if?) this is sorted out
Cheers
Duncan
HI guys,
I STRONGLY SUGGEST NOT TO BUY THIS MODEL!!!
I hv bought this set and am struggling too! I hv bought this set only because, this supports data sync with PC. I hv given it back at the service center but they r clue less. U cannot write anything from PC to Mobile via bluetooth. More over, data cable is not supported by this model, which is agreed by the service center people.
I am gonna ask for compensation for this if they r not able to resolve this problem.
They can't take the consumers for ride like this.
I hv provided them with good support, in the nokia PC suit, the handset shows a lock symbol after pairing. It means there is some software lock which prevents us from writing to mobile from PC.
Any opinions or solutions solicited.
Regards
Prasanna

2600 classic not keep settings when turned off and...

I bought my 12 yr old daughter a Nokia 2600 classic as her first phone, and it won't keep her display or theme settings. When she turns phone off and back on the settings are back to originial (default)?
Is this becaiuse we are not unsing it right.
Do I take it back under warranty?

have you tried to create a profile then activate it this was a common fault with the nokia 6500 due to loose back cover and storing items on memo card but thisphone does not take a memo card
try taking out the battery for 5 mins then a factory reset,the code is 12345 then create and activate a profile.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

2600 classic newbie

I have just bought a 2600 classic, and am in the middle of entering all of my contact numbers. I would like to put them into seperate groups, so I don't have to scroll through all the numbers.
When I add a number to a group, it remains in the main list, which defeats the purpose (for me at least) of putting them in the groups.
Is there a way to do this? Its probably easy, but I can't see how.
Thanks in advance (and don't laugh too hard at me

the numbers will remain on list, when you look at groups they will appear as you have selected for each group
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

2600 classic battery live

Hi, I just bought a 2600 classic. The battery live should be max. 560 hours, but after 4 days I have to recharge. What can be the reason? **mail address deleted by moderator - please use PM system only**
Message Edited by romanov on 06-Jan-2009 06:55 PM

When phone manufacturers quote a standby time it's under ideal conditions.
Ideal conditions are when the phone has a very strong constant signal and is not being used or moved at all. All data and connectivity features are disabled. No calls, messages or even having it's keys pressed are allowed under testing.
In the real world you'll never get battery life like that.
4 days is very good for that model. My friend has the same phone and only gets 2 days.
Message Edited by psychomania on 06-Jan-2009 07:23 PM

2600 Classic, connecting to PC

hi, I have a 2600 Classic, is there a data cable available to be able to connect it to a PC?
otherwise how do you get images you have taken on the phone onto the PC?
i have read somewhere data transfer isn't possible... in which case, what is the port on the side of the phone for, between the headphone socket and charging socket?
thank you!

WIDCOMM and Microsoft Bluetooth are listed. The WIDCOMM one is checked as this was installed with my Sitecom bluetooth dongle. The MS one is unchecked.
I've tried unchecking both and checking on again but to no avail.
When I go through the "get connected" wizard, PC Suite finds my N95 etc but at the end of the wizard "no phone connected" remains displayed and the red cross in the PC Suite system icon remains. I can, however, send/receive things by bluetooth but as PC Suite isn't recognising it being connected, I can't sync stuff which is the only thing I desperately need to do!
F

2600 Classic, pre-installed games

My 2600 Classic (on AT&T Wireless) came with 3 pre-installed game demos, one of which was Tetris. Following the links in the phone, I purchased the registered version of Tetris. I was charged $6.99 USD, the game downloaded, and a screen came up that said the application was now unlocked. When I tried to start the game there was an error that said that my license was unable to be validated. After fighting with it for a while and checking all of my network settings, I called AT&T Tech Support. Get this one... They said that Tetris is not compatible with the Nokia 2600 Classic model phone. What a load of **bleep**, Nokia pre-installed the game to begin with. Nokia has been the only mobile phone brand that I have ever purchased. In about 15 years, I am on my 6th Nokia phone. It is really dissapointing to see just how poor their selection of bar phones has become. This model doesn't even have a calculator any more.

Hi,
Ive looked on a few download sites for the tetris game and it does not seem to be compatable with the Nokia 2600 like you say.
Maybe you could contact Nokia or at&t and plead your case for a refund on the download fee. Its down to who put the game software on ! Obviously not java supported.
Silly to impose a demo game on a fone and then does not allow an upgrade.
Nokia Lumia 520
 iphone 6 Plus.
Be happy !!

Assign tone Nokia 2600 Classic

Plse Help me,
how to create a assign tone for a specific number or Name in Nokia 2600 Classic Mobile phone

hey just get a CA-50 data cable.
Download the nokia PC Suite version 7.1.26 from nokia website,
Attach the data cable to your phone and PC.
The Pc Suite will detect your NOkia 2600c-2.
Now in PC Suite click on "connect to internet".
Thats all, you have a one touch access to the internet on your PC.
You can also transfer images, ringtones, etc. through PC Suite.

Feature Request - Please allow for a "classic" view option.

Please allow for a "classic" view option like you have in Mail. Miss the sidebar that had a list of all the calendars using. The pop up list is not nearly as functional. iCal in Lion may be great for touch screen users but is a step back on the intuitive scale for Mac users.
Also, the delete / revert button are too close to the done button. Too easy to hit on accident.

This is a good feature request and should be submitted here: Adobe - Feature Request/Bug Report Form
The team reviews all the requests that come in through that form. It is a guaranteed way to get your request seen while we do not always see everything that gets posted to the forums.

PO output for Extended classic Scenario from the R/3 backend

Hi,
1) Does the PO output (ignoring the config maintained in SRM server 5.5 for the output) through R/3 backend is standard or it is mandatory to give local outputs from SRM only incase of Extended classic scenario?
Regards,
DV

Hi Anil,
We are working on extended classic scenario with SRM 5.0 & ECC6.0.
Please explain how we can take "PO output for Extended classic Scenario from the R/3 backend ".
Please send the related document to [email protected]
Thanks in advance
Ashutosh

How to run a silent configuration for Forms and Reports 11g ?

Hi all,
I've run a silent installation for Oracle Forms and Reports 11g R2 in Windows 7 64 bit.
I made it using a response file called install_only.rsp. Now I want to run the configuration also in silent mode.
How can I do it ?
I know that I can use a template called configure_only.rsp. However, i don't know what is the correct syntax for the command to start configuration.
Should I use the same setup.exe installer and inform configure_only.rsp as response file ?
The command below is the appropriate command for this task:
setup.exe -silent -response configure_only.rsp
Or is there another way to be followed?
Thanks a lot.

Alright, I eventually found the answer.
Configuration must be run from directory on windows.
Command is shown below:
<FORMS_HOME>/bin/config.bat -silent -response <path-to-response-file>

Configuration steps for Extended Classic Scenario

Hi All,
Could you please let me know what are the configuration steps required for extended classic scenario.
Thanks in advance

Hi,
Important Settings that Determine the Extended Classic Scenario
The following settings are required for the extended classic scenario:
u2022 At least one backend materials management system and accounting system is connected to the SAP SRM system and defined in the configuration setting Define Backend Systems.
u2022 Product categories from the backend procurement system are replicated and used in the SAP SRM system.
u2022 The target system for each product category is the backend system in the configuration setting Define Backend Systems for Product Category. Optionally, BADI BBP_DETERMINE_LOGSYS is implemented to determine the backend system.
u2022 The extended classic scenario is activated in the configuration setting Activate Extended Classic Scenario. Alternatively, BAdI BBP_EXTLOCALPO_BADI is implemented to control the extended classic scenario based on customer defined rules.
u2022 If the backend system is an SAP R/3 version lower than 4.6B, you must define local purchasing organizations and purchasing groups.
u2022 If the backend system is an SAP R/3 version 4.6B or higher, you need to map the purchasing group used in the purchase order to the backend purchase group in one of the following ways:
u2022 Use a backend purchasing organization and purchasing group in the shopping cart and purchase order.
u2022 Use BAdI BBP_PGRP_FIND to determine a backend purchasing group in the shopping cart.
u2022 If a local (created in SAP SRM without reference to a backend system) purchasing group and purchasing organization are used, then a valid backend purchasing group is assigned to the RFC user that created the backend purchase order. This assignment is made in the backend system using user parameter EKG in Transaction code SU01.
u2022 Implement the user exit of the BAPIs BAPI_PO_CREATE1 (EXIT_SAPL2012_001 and EXIT_SAPL2012_003), and BAPI_PO_CHANGE (EXIT_SAPL2012_002 and EXIT_SAPL2012_004) to determine the purchasing group with a customer- specific logic.
This is for your additional information.
Hope this helps.
Regards,
Vikas

Silent startup for 2600 Classic

Similar Messages

Maybe you are looking for