Silent switch just stopped working

Ok so my silent switch was working just fine. And as I was going to sleep one night and trying to swtich it to silent, it stayed on loud no matter how many times i flicked the switch. I didn't drop the phone or do anything to it. What's wrong ?

you can try the restore first to make sure it is nothing software related. makesure to back up information and restore as new. after that it is hardware if your with in the limited hardware warranty and can be replaced for free if you are not then it can be replaced for 149$ if it is a iphone 4 or lower

Similar Messages

Iphone ring/silent switch has stopped working

My iphone 3gs ring/silent switch has stopped working, whenever i switch it over to silent, it vibrates but then flickers between ring and silent and then ends up staying on ring, even when it is in the silent position. HELP!

Have you dropped your phone? Is it still under warranty? Does sound like a physical hardware issue, and I doubt anyone here can help further than telling you to make an appointment at a genius bar and get it fixed or replaced if allowed.

Imac 20" just stopped working - just switches off

Hi I'm running an imac 20" intel and its about a year old - I've had no problems with it until now - I installed ilife 08 last week and also added a 4 port USB extender cable but it worked ok for a few days after.....Now it has suddenly started turning itself off and I have to unplug the power cable before turning on again and even then it starts to boot and then switches off........fortunately I backed everything up the first time it did it but is it the power cable or a computer issue? I'm in Singapore...
Thanks for the help
I'm running OSX Tiger and am fully updated.

my imac does the same thing. have you gotten any resolution to this? I have had my mac only working first 2 months after i bought it.been sitting in box in closet now for over a year. Because it just "stopped working" . turns on -get the apple screen then click -off. help if u got any.

I've set up a new iMac and transferred my library. Now, when I switch on iTunes Match it gets to about 25% on stage 1 and just stops working, Anyone know how to fix this?

I've set up a new iMac and transferred my library. Now, when I switch on iTunes Match it gets to about 25% on stage 1 and just stops working, Anyone know how to fix this?

Ok, so the likely cause is 1 or more Songs are tripping up iTunes Match. To resolve, move to Song view, switch on iCloud Status and iCloud Download fields - sort the view on iCloud Status - identify Songs with status other than Purchased, Matched or Uploaded. Temporarily remove them from the library, allow iTunes Match to complete the 3-step process. Gradually import the Songs back in - any that cause a repeat failure, place in a playlist, burn to audio CD and import as 256k AAC.
Note: iTunes Match service in UK at present is intermittant, may be worth trying from 1200 tomorrow to give Apple the chance to complete its current updates.

My click sounds and ringer sounds on my iphone4 just stopped working....what can i do to fix it?

my click sounds and ringer sounds on my iphone4 just stopped working....what can i do to fix it?

Is the mute button on the side of the phone switched on?
Also go to settings, scroll to the bottom and ensure that "Keyboard Clicks" is set to on. Make sure that the "Ringer and Alerts" volume is not set at zero in this menu.

Wireless just stopped working..

Hi,
My wireless used to work but not it just stopped working and it works sometimes but mostly not.
I have three other mac laptops in my house and a few computers and they all work with the linksys router and they get on wireless fine.
but when I try to connect with the windows vista laptop it says this computer does not have a wireless network adapter installed and configured...?
and the wireless switch is always orange no matter which way I turn it.
how do i connest to wireless!
thanks so much in advance
the model is a 32-bit hp pavilion dv600 - dv6405us
Message Edited by computersrcool on 08-22-2009 04:37 PM

You may want to ask this on this forum for computer networking. This one is more for networked printer problems.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Nano just stopped working???

My ipod has just stopped working. I was listening to it this morning and there was more than enough charge in it. I go to turn it on now and nothing, checked to make sure it was not locked and still nothing. Connected it up to the computer and it doesn't even see it as and external device - it's just dead. I only purchased this ipod less than 60 days ago. I did have a weird thing happen about 2 weeks ago as well.......the music stopped and all the pictures were scrambled lines all the graphics on the ipod were gone. I did manage to reset and re sync with my computer that time, but I'm thinking maybe I got a lemon? How do I go about getting this issue resolved? Looking forward to anyones suggestions. BTW I did try to take it back to Walmart where I purchased it and they won't take it back after 10 days what a bunch of crap.

Just got this from some else's question about a dead ipod and this worked...Thanks glad I visited the site.
You may need to reset it. So first thing to try is...
Put the hold switch to the OFF/White position. Now toggle it ON/orange then back off again. Then press and hold both the MENU and center buttons on the iPod and hold them for a good 15 seconds or so. Your iPod should reboot starting with the Apple Logo screen.
If it doesn't work the first time, give it a second or third go. Sometimes it takes a few/several tries.
See this thread as an example of what I mean by needing to try it many times...
http://discussions.apple.com/message.jspa?messageID=5065208
http://www.apple.com/support/ipod/five_rs/
Patrick

Airport Extreme Card just stopped working -help!!

I've had my MacBook Pro since mid August with a built Airport Extreme Card. It has for most of the time been working fine with my Netgear router. Yesterday it just stopped working. The black bars aren't showing on the aiport, it keeps refusing to accept the WEP password.
I have tried switching the airport on and off, and have also switched off the router and re started it, all to no avail. The WEP password is correct.
I have a WIFI printer connection and the airport will not connect to that either.
This has happened once before about 6 weeks ago but I can't remember what I did, if anything, to remedy the situation.
I have 3 other laptops all working perfectly well on the system, and all printing from the printer without any problems.
Any suggestions before I and the laptop go hurtling through the first floor window?

Hello MiBy. Welcome to the Apple Discussions!
I've had my MacBook Pro since mid August with a built Airport Extreme Card. It has for most of the time been working fine with my Netgear router. Yesterday it just stopped working. The black bars aren't showing on the aiport, it keeps refusing to accept the WEP password.
Try resetting your MBP's PRAM ...
Reset the PRAM
o Shut down the computer.
o Turn on the computer.
o Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
o Hold the keys down until the computer restarts and you hear the startup sound for the second time.
o Release the keys.
(ref: Resetting your Mac's PRAM and NVRAM)

NF 980 PS2 Mouse & Keyboard PS2 IC just stopped working.

Hello, My PS2 Mouse & Keyboard intergrated circuit connections just stopped working. My Rig is only 6weeks old & was using Win 7 Ultimate 64bit. Everything was fine untill yesterday. all of a sudden the connections don't work. I tried doing a system restore. rebooted several times, unplugged & reconnected both mouse & Keyboard plugs to the PS2 connections & still not being recognized at boot up. I plugged in a USB Mouse & Keyboard adaptor & is working fine. I'm thinking something happend to the IC chip. Are these Mobo's known for this problem? I don't think I'm going to RMA the Mobo unless something else happens.
Please let me know what you think. Thanks.

Quote from: vcooper1 on 27-January-10, 13:26:40
Hey Fredrik,
Thank you very much. All I did was shut down & remove the power plug like you suggested & removed the USB Mouse/Keyboard adaptor, & plugged back into the PS2 IC Connections, & it's working great.
Could you explain what happen?
Hi,
Keyboards and mice have electronic circuitry. When you just reboot or reset the machine, voltage still goes to the peripherals like the keyboard and mouse.
It sounds like, for some reason, the keyboard and mouse got into a non-working state, but when you rebooted or reset your machine, since power was still going to the keyboard and mouse, they didn't get reset.
When you unplugged the power, that removed power from everything (well, almost), including the peripherals, so that would've reset the keyboard and mouse.
If you have an external/USB hard drive, you can see this behavior by watching the drive light. When you shutdown your machine, the drive light will stay on, unless you unplug from the wall, or flip the switch on the back of the power supply.
Jim

Exposé and now gestures just stop working?!?

Hi everyone,
   So I had this issue in Snow Leopard where occasionally, in the middle of the day, Exposé, Spaces, and my Hot Corners would just stop working for no apparent reason. Seems to always occur after I return from lunch.
   Well, today I upgraded to Lion, and this afternoon am having the same issue, only this time more pronounced. Absolutely NONE of my Magic Trackpad gestures are working now. They do work within applications, but I can not invoke Mission Control, Exposé, Launch Pad, or desktop switching from my Magoc Trackpad. I do not have this same issue with my home machine, (a same - generation 8-Core Mac Pro).
   I should add that the trackpad is a recent purchase (just this past Friday), but the seemingly identical (SL) Exposé issue was presenting itself long before.
Any thoughts?

Really? Nothing? C'mon guys... I can't be the only one to be having this issue...

TS3274 why would touch screen just stop working?

The touch screen just stopped working, it is charged, can not turn off, can't do anything with screen. Has anyone else had this problem and any suggestions
as to how to fix. Thanks in advance

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Microsoft exchange just stopped working.

Microsoft exchange just stopped working, getting error message "cannot get mail, the connection to the server failed" no settings have been changed on my iPad.

Handed it over to my LAN administrator and they managed to sort it out. Basically deleted everything and switched it off then re loaded mail account. Now it works.

Wifi just stopped working on an iPhone 4S, iOS 8.1.3. Have reset to factory settings and restored, still no wifi.

Wifi just stopped working on an iPhone 4S, iOS 8.1.3. Have reset to factory settings and restored, still no wifi. Will next release of iOS address this problem?

Hey there kevin8!
I have an article for you that can help you continue to troubleshoot this issue with the Wi-Fi on your iPhone. The article can be found right here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Hopefully that will help resolve your issue. Thanks for using the Apple Support Communities!
Cheers,
Braden

Hi, i have an IPod Touch 4g. One of the earphones just stops working after while,no matter how many times i replace them. What do i do?

Hi, i bought my IPod 4G about 7 months ago. After about a mont of buying them, one the earphones just stopped working which became extremely annoying..so i bought a new set of earphones and they worked well for about 5/6 months and then one of them stopped working as well. About 2 weeks ago, i bought a new set of earphones and now the right earphone of that has stopped working as well. The thing is, the earphone doesnt just stop working on my IPod, it also stops working on my laptop...and now i am very confused as to where the problem lies. I can't keep buying headphones every other week cos that is just too expensive and i dont know if the problem lies with my IPod or what! The same thing is happening to my sister's IPod as they were purchased at the same time. What do we do??

This previous discussion discusses the same if not similar problem.
https://discussions.apple.com/message/6750990#6750990

Can't open a dng or raw file in cs5, just stops working. So many problems in cs5!

I totally feel for you. Just upgraded from cs4 to cs5 and it was the biggest mistake i ever made. It will probably end my livelihood as a photographer since EVERY time i open a raw file it crashes photoshop, makes it freeze up after i have adjuted the file in camera raw then I hit open; i get a few bars then it just stops working.
Even got tech help, which helped when i was on the phone with them. The next day the problem came back even when I danced the same jig that I did when I had the guy on the phone - he had me move a raw file on to the desktop rather than take open from my hard drive, then I was able to open it, so we came to the conclusion that my drive was corrupt. I had the same information backed up on a brand new hard drive so we compared files from the each drive against the other. The files from the new drive opened successfully. Yesterday. Now Photoshop cs5 doesn't open any raw or dng files at all from anywhere so it can only be a problem with photoshop. We thought we had the problem solved but we did not. This never happened on CS4 unless i was trying to open 30 or more raw files, and even then it gave me a warning that it had no more ram, it didn't just lock up and do nothing. I'm at my wit's end. Even though there are a lot of great new things in cs5, they aren't very useful if you can't use the product to do the simplest thing.

1) Install the Photoshop 12.0.1 update
2) Install the latest ACR update.
If problems continue after that, then there probably is something wrong with your system.

Silent switch just stopped working

Similar Messages

Maybe you are looking for