Silent uninstall issue with JRE Version 1.7.0.60

we use the following install/uninstall string for quite a long time without any problems:
Install:
msiexec /i "%~dp0x86\jre1.7.0_55.msi" PROG=0 INSTALLDIR="%ProgramFiles%\Java\jre1.7.0_55" /qn REBOOT=ReallySuppress /l* Installx86.log TRANSFORMS=jre1031.mst METHOD=joff SKIPLICENSE=1 JU=0 AU=0 REMOVEEXISTING=1 JAVAUPDATE=0 AUTOUPDATECHECK=0 SYSTRAY=0 ENDDIALOG=0
Uninstall:
MsiExec.exe /X {26A24AE4-039D-4CA4-87B4-2F83217055FF} /qn REBOOT=ReallySuppress /l* UnInstall.log
The uninstall script even runs silent when Java runs in a browser while uninstall is executed since version 1.7.0.55.
With the new JRE Version 1.7.0_60 a window appears during silent uninstall saying that i have to close the browser to proceed. I think it has to be a bug because we use the MSI-Installer with "/qn"-property and there should never be any window but an errorcode on the command line.
It happens with x86 and (if a x64 Internet Explorer Tab is open) with x64 silent uninstall.
Can someone confirm this behavior and report this bug? Or can someone tell me where I could report this bug myself?

I'd say you can report the bug on http://bugreport.java.com/ under "Submit a Bug".
-- rpr.

Similar Messages

I have been getting java.lang.ClassNotFoundException: ZeroApplet.class and java.lang.ClassNotFoundException: JavaToJS.class crashes with JRE version 1.6.0_26-b03-384-10M3425 VM executing a Java Applet. Is Apple aware of this problem? No longer supported?

My web page uses a Java Applet to allow my visitors to replay chess games; the Chess Viewer Deluxe applet was written by Nikolai Pilafov some time ago and has been working properly for some time (until recently). I don't monitor this part of my site regularly so I am not sure when it began to fail. On his web site [http://chesstuff.blogspot.com/2008/11/chess-viewer-deluxe.html] he has a link to check LiveConnect object functionality (which fails for OBJECT tags). His recommendation is to "seek platform specific support which might be available from the JRE developers for your platform".
I have been getting java.lang.ClassNotFoundException: ZeroApplet.class and java.lang.ClassNotFoundException: JavaToJS.class crashes with JRE version 1.6.0_26-b03-384-10M3425 VM executing a Java Applet. Until I checked the LiveConnect object functionality, I was unable to identify the source of the console error messages. This does seem to be the smoking gun.
Is Apple aware of this problem? Are these classes no longer supported? Has anyone else had this problem? You can attempt to recreate the problem locally by going to my web page: http://donsmallidge.com/DonSmallidgeChess.html
Thanks in advance for any help you can provide!
Abbreviated Java Console output:
Java Plug-in 1.6.0_26
Using JRE version 1.6.0_26-b03-384-10M3425 Java HotSpot(TM) 64-Bit Server VM
load: class ZeroApplet.class not found.
java.lang.ClassNotFoundException: ZeroApplet.class
    at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:211)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:144)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
    at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:662)
    at sun.applet.AppletPanel.createApplet(AppletPanel.java:807)
    at sun.plugin.AppletViewer.createApplet(AppletViewer.java:2389)
    at sun.applet.AppletPanel.runLoader(AppletPanel.java:714)
    at sun.applet.AppletPanel.run(AppletPanel.java:368)
    at java.lang.Thread.run(Thread.java:680)
load: class JavaToJS.class not found.
java.lang.ClassNotFoundException: JavaToJS.class
    at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:211)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:144)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
    at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:662)
    at sun.applet.AppletPanel.createApplet(AppletPanel.java:807)
    at sun.plugin.AppletViewer.createApplet(AppletViewer.java:2389)
    at sun.applet.AppletPanel.runLoader(AppletPanel.java:714)
    at sun.applet.AppletPanel.run(AppletPanel.java:368)
    at java.lang.Thread.run(Thread.java:680)

I just went up to check the LiveConnect object functionality page AND IT WORKED THIS TIME! I must confess, this is very mysterious. I will do some more checking and reply here if I can determine why it is working now (and more importantly, why it didn't work before).

Having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

AirPort Utility in Mountain Lion will not support the older versions of the AirPort Express.....model numbers A1084 and A1088. Check on the side of the Express for the model number.
In addition, AirPort Utility in Mountain Lion will not support the older "round" or "dome" shaped versions of the AirPort Extreme.
Can you check to see how your devices might be affected?

How can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

how can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

It's hopelessly outdated. It's simply not compatible.
Mylenium

Issues with Mac Version of Adobe Captivate 6

I am having issues with Adobe Captivate 6 for Mac. I am missing functionality. Specifically the advanced actions dialog box. I get "null" value in all the fields in the dialog box. Also when I open captivate the welcome screen is blank. I tried uninstalling and re-installing but I am still having the same issues. Am I missing something on the install? Has anyone else experienced these issues?

Hi,
Did it worked fine previously? Can share some more information like your Mac version?
Can you share the screenshot of the problem screens?
Also, Try to follow these steps, to verify in case your Preferences have not gone corrupted--
1) Close Captivate
2) Launch Finder
3) Go -- Go to Location
4) ~/Library -- Go to Preference>Adobe> Adobe Captivate 6, Rename the Folder to 'Adobe Captivate 6_Old '
5) Relaunch Captivate and verify if thing improve.
Thanks,
Anjaneai

Query caching issue with Toplink version 10.1.3.5.0

We are in the process of upgrading the toplink version from 9.0.4.7 to 10.1.3.5.0
We are finding an odd issue with insert statements generated for an aggregate collection mapping with addTargetForeignKeyFieldName.
We have a Table Ticket and Table Task with Table Activity as a child for both.
Table Ticket
Ticket_Key (PK)
Table B
Task_Key (PK)
Table C
Activity_Key (PK)
Task_Key (FK)
Ticket_Key(FK)
Notes
Version
Here are the mappings from
Ticket Project
AggregateCollectionMapping activitiesMapping = new AggregateCollectionMapping();
        activitiesMapping.setAttributeName("activities");
        activitiesMapping.setReferenceClass(com.common.Activity.class);
        activitiesMapping.dontUseIndirection();
activitiesMapping.privateOwnedRelationship();
        activitiesMapping.useCollectionClass(java.util.ArrayList.class);
        activitiesMapping.addTargetForeignKeyFieldName("ACTIVITY.TICKET_KEY", "TICKET.TICKET_KEY");
activitiesMapping.useBatchReading();
        descriptor.addMapping(activitiesMapping);
Task Project:
AggregateCollectionMapping activitiesMapping = new AggregateCollectionMapping();
        activitiesMapping.setAttributeName("activities");
        activitiesMapping.setReferenceClass(com.common.Activity.class);
        activitiesMapping.dontUseIndirection();
activitiesMapping.privateOwnedRelationship();
        activitiesMapping.useCollectionClass(java.util.ArrayList.class);
        activitiesMapping.addTargetForeignKeyFieldName("ACTIVITY.TASK_KEY", "TASK.TASK_KEY");
activitiesMapping.useBatchReading();
        descriptor.addMapping(activitiesMapping);
The tickets and tasks with activities gets inserted in the same transaction.
Here are the queries that what we get from the toplink version 9.x
2013-10-29 10:30:50,582 - SELECT SEQ_ACTIVITY.NEXTVAL FROM DUAL
2013-10-29 10:30:50,582 - INSERT INTO ACTIVITY (TASK_KEY, VERSION, NOTES, ACTIVITY_KEY) VALUES (?, ?, ?, ?)
2013-10-29 10:30:50,582 - bind => [2900830, 0, Create Task, 8590870]
2013-10-29 10:30:50,926 - INSERT INTO ACTIVITY (TICKET_KEY, VERSION, NOTES, ACTIVITY_KEY) VALUES (?, ?, ?, ?)
2013-10-29 10:30:50,926 - bind => [326450, 1, Created Ticket, 8590860]
Here are the queries generated from toplink version 10.x
2013-10-26 23:31:10,426   SELECT SEQ_ACTIVITY.NEXTVAL FROM DUAL
2013-10-26 23:31:10,430   INSERT INTO ACTIVITY (TASK_KEY, ACTIVITY_KEY,NOTES, VERSION) VALUES (?, ?, ?, ?)
2013-10-26 23:31:10,430   bind => [2900690, 8590500, Create Task, 0]
2013-10-26 23:31:10,509 INSERT INTO ACTIVITY (TASK_KEY, ACTIVITY_KEY, NOTES, VERSION) VALUES (?, ?, ?, ?)
2013-10-26 23:31:10,510   bind => [null, 8590490, Created Ticket, 1]
It appears like the new version of the toplink caching the prepared statements and it is not recognizing the targetForeignKeyFieldName mapping of the Ticket Project.
Any help in resolving this issue is appreciated.
Thanks

Hi James,
1)Yes it supports IE 8 .Please review the below link for certification details on browers :-
    http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BAJGCBEA
     Note: Oracle Application Server supports only those browsers.
2)Forms only support Windows 7 32 bit only.
    Please refer to the note:1292919.1 "Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit)"
3)Could you provide more information of JVM because when you install 10gR2 it has JDK and JRE present in it.
Regards,
Prakash.

Is anyone having issues with Android version 4.3 for Galaxy III throwing in zeroes into text messages?

I received a message on Christmas Eve that a free update was available for my Samsung Galaxy III. I accepted the download and discovered some enhancements and fixes that I liked (finally, my voicemail icon displays the number of waiting voicemails that I have!) but I've noticed to glaring issues:
1. When I send text messages that include numbers (a phone number for example) the OS throws in random zeroes into the number. I have to usually touch the ENTER key and type the number on a new line and play around with it until the number stays in the message correctly.
2. I've had occasional lockups using the media hub which, when I do a restart, causes my settings to revert to the default factory settings....kind of a pain.
There may be other issues.
Q. Has anyone out there experienced this same thing?
Q. Is Google going to fix these issues? I noticed that on Christmas day a half dozen or so updates were made, but these to things still are a problem.
Q. Also, the Verizon Wireless Software Upgrade Assistant on my laptop insists that my version is not supported. I can still access photos and music, but it's a little annoying...

I'm sorry you're having issues with your phone after your update BigLouie1124. I recommend enabling safe mode to see if any of your apps are causing issues with your new software. If so, you can remove them. Here are the steps http://vz.to/1cD0kqT . If you continue to have issues the last step would be a factory reset to clear up some of your issues http://vz.to/JCsr33 . Please keep us posted and continue to clear unwanted message threads and clear your browser history periodically.
KinquanaH_VZW
Follow us on Twitter @vzwsupport

IE 7 problem with jre version 1.4.1

We are experiencing a problem with a site that is running java applets. It requires version 1.4.1. After logging into this site, a second window should appear. There are several times when that second window will attempt to open but then closes immediately. The only fix that I have found is to open the Java Console (tools>Sun Java Console) with the browser open and then immediately close the console.
Is there another workaround or fix?
Thanks

Starting in JRE 5.0u7 and 6, we have family clsid support for the 1.4.2 and 5.0 JRE family. Please refer to Deploying Java Applets With Family JRE Versions in Java Plug-In for Internet Explorer for details. In your HTML page you can specify the 1.4.2 family clsid so that the latest installed JRE 1.4.2 version on the machine will be used. Note that we no longer support JRE 1.4.1. Please migrate your applet to JRE 1.4.2 or newer JRE versions.
http://java.sun.com/developer/community/askxprt/2007/jl0212.html
=> upgrade to the latest jre

Issues with newer version of Acrobat Reader

I'm not looking for advice or a fix for this problem. I'm simply posting it so that hopefully, the folks at Adobe will get a clue & take the issues with their software seriously. The real fix here is for them to quit ignoring bugs in their software and correct the code. Anyway...
In the most recent versions of Acrobat Reader (looks like specifically to X & XI), it seems to be hit or miss as to whether Reader will open PDF attachments in Outlook email. Typically, when I double-click on a PDF attachment, nothing happens. An instance of AcroRd32.exe is created as a process (which hangs), but the PDF file doesn't open. If I make the mistake of double-clicking on the file again, another instance of AcroRd32.exe sucks up more of my system resources. This will occur for each time I double-click on the attachment. Sometimes I get lucky, and it will open the PDF file. Sometimes, if I right-click on the attachment and select open, it will do so. Most times, it just does the same thing as double-clicking.
I've scoured the forums, searched online... Lots of people have reported this or similar problems. Solutions have been offered up, which don't work for most users. etc., etc., etc.
It's just like the issue that Adobe has had for years with Acrobat - The software is notorious for remaining in memory as a process, long after you've closed the PDF file you opened. And likewise, for each PDF file you open, yet another instance of the software loads into & consumes memory.
Adobe has had problems like this for years. They never have taken it seriously, they never choose to fix it.
So, as I said in the beginning of the post - I'm not looking for a fix. I came up with my own fix - I deleted version XI, located an old copy of 9.4 & installed it.
Nope, I'm not looking for solutions or support. I simply wanted to ***** about it.
Doubt Adobe will even notice the post, and if they do, they'll just operate like they always have... Hope that their sloppy code just magically fixes itself.

This is a user forum, and not the place to file bug reports to Adobe. So you are right: your post won't be noticed by the Acrobat developers. Nor would it give them enough information to reproduce the problem.
P.S. I never had a problem opening Outlook attachments with Adobe Reader. If I had, I would start by disabling Protected Mode, which is the most common cause for a multitude of problems in Adobe Reader.

ISSUE WITH NEW VERSION OF BLACKBERRY MESSENGER ON DIFFERENT BLACKBERRY PHONES

Dear Madam / Sirs,
I would like to seek assistance in resolving an issue with my BLACKBERRY TORCH 9810 I installed the new version of BLACKBERRY MESSENGER on my phone and it does not work on WIFI ONLY MODE.
For example I traveled to Mexico and Panama and was on a WIFI ZONE with open access and tried to use my BLACKBERRY MESSENGER and it did not work...I tried to deleting the application and installing a previous version but was not possible. The same issue occurs on a different BLACKBERRY phone that it was working perfectly...but after updating to the new version of BLACKBERRY MESSENGER it did not work.
Please help me resolve this issue.
Thanks in advance
Polk Marin
E-mail: (personal info removed)@yahoo.com

and what version do you have installed? I dont see this on ver 6.2.0.56
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

I am having issues with new version of Final Cut Pro, is there away to download the last version so I can finish my projects?

I am having major issues with the new version of Final Cut x, I have missing clips and my computer is locking up, I need to finish some projects so is there away to go back to the last version before the new update?

Not unless you have saved a copy of the previous version; also, any libraries that you have updated to use in the newer version will not be usable in the older version anyway.
Rather than going back you should try and figure out what is wrong. The current version works great for most users. Start by clearing your preferences: hold down command and option keys while starting FCP X, and confirm when asked. Many different issues can often be solved by just that.
In case it doesn't solve, please provide more detailed information like OS version, Ram, drive and connection, etc

Issue with planning version in KP98

Hi Team,
I have an issue with KP98 transaction when copying the actual data to plan data . The problem which I am facing is we are copying period 1 to 6 actuals data to 1 to 6 Forecast version 82 and after executing it copies the data in to old tables COSP but it is not updating FAGLFLEXT table.
We have created a planner profile with summary table FAGLFLEXT and posted the data using KP06 and GP12N.
To update data we are executing FAGL_CO_PLAN transaction and it load the data in to FGALFLEXT table . Please help me to understand why data is not loaded when using KP98 and why it is loading when using FAGL_CO_PLAN.
Thank you
Srivani

Hi Srivani
As far as I know, KP98 is meant to copy the Plan / Actual data from one version to another. It is not designed to update FAGL tables
I am not sure if there is an option to copy the data similar way in New GL planning or not. But what you are doing currently seems to be the right way to me
Br, Ajay M

ISSUE WITH LATEST VERSION 7.6.9. QT

I have a quick time movie showing a 360' photograph which had previously worked ok in qt but since installing new version it crashes in every browser.I have uninstalled and gone back to earlier version though this means I can't update itunes.
Error given was that the QuickTime PlugIn 7.6.9 crashed.
Can anyone shed some light? I include link to site.Thanks.
http://themuseumofsoho.org.uk/colony4.html

We too have this issue. We deliver QuickTime .mov file panoramic images via our product. The problems as well an the amount and type of new issues we have with QuickTime player are staggering!!
The latest is occurring after upgrade to new iTunes and QuickTime 7.6.9.
Upon trying to launch the images in QuickTime Player we get the following error:
Problem signature:
Problem Event Name: BEX
Application Name: QuickTimePlayer.exe
Application Version: 7.69.80.9
Application Timestamp: 4cf444ff
Fault Module Name: QuickTimePlayer.dll
Fault Module Version: 7.69.80.9
Fault Module Timestamp: 4cf444e1
Exception Offset: 00005b6d
Exception Code: c0000409
Exception Data: 00000000
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 3aba
Additional Information 2: 3aba12579abe99f5f6f6dab7232769e3
Additional Information 3: 4057
Additional Information 4: 4057dbe815d85f100b6ba5a14c8eb1c7
When trying to view any QuickTime .mov files embedded in a page we get:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iexplore.exe
Application Version: 8.0.7600.16700
Application Timestamp: 4cd23213
Fault Module Name: QuickTime.qts
Fault Module Version: 7.69.80.9
Fault Module Timestamp: 4cf4536a
Exception Code: c0000005
Exception Offset: 00111013
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
We have tried to run msconfig and disable all non windows software with no help. If anyone has any ideas we would be very grateful!!

Issues with different versions of Oracle.DataAccess.dll

I have a .net web service application which references version 10.2.0.100 of Oracle.DataAccess.dll. A client has setup Oracle 10g database on the server, but I think the server has a patch set installed so it appears that the versions of Oracle.DataAccess.dll in my web service and on the database server do not match. When I issue a query via the web service on my local machine using my oracle 10g client, the web method returns the correct data. If I issue the same query using the same .net web service on the clients database server, I get the following error: Oracle.DataAccess.Client.OracleException: ORA-00923: FROM keyword not found where expected. There's nothing wrong with the query syntax, I can run the same query from SQL Plus on the database server and get the correct data. Could it be a compatibility issue between the Oracle.DataAccess.dll referenced in my web service application and the file on the sever. I'm not sure what else to look for, any advice is greatly appreciate, and I can answer any questions if needed.
Thanks,
NA

I would not expect an ORA-923 if your the Oracle client was not installed properly. I would expect an exception or a crash.
You can run an ODP.NET trace to find out what query is getting the ORA-923 by doing the following:
1) Shutdown web server on the machine that runs the webservice (middle tier),
2) In windows registry, on the machine that runs the webservice (middle tier), change registry value \\HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ODP.NET\4.112.1.1\TraceLevel to 1
3) Reproduce the ORA-923 only
4) shutdown webserver
5) Undo the registry value (set it back to 0)
6) In the generated file (c:\odpnet2.0.trc) do a search for "923", hopefully you can find it. Just before that error, you should see the SQL that was executed. This will obviously not be what you expect and will hopefully point you to the cause of the problem.

Issues with old version of Quicktime and Windows Vista

I have recently upgraded a PC of mine to Vista. In doing so, I seem to have issues installing an old application that used Quicktime 1.6 (yes, 1.6, you read that right). It is an old piano teaching application called Piano Discovery) that uses QT1.6 to play video and audio files as part of the instructional process. It was originally written to run on Windows 3.1. The problem is that sometimes it will install in Vista and sometimes it will not. It seems that if a fresh clean install of vista is done, and the program is installed immediately thereafter, before any updates from microsoft, it works. But not always. When it does not work, trying to install QT1.6 as part of the program installation results in the following error:
QTINSTAL caused a general Protection Fault in module QT16INST.EXE at 0002:5DA9
The installation then fails. Now you are all probably wondering why I don't use a newer version of Quicktime. Tried that. Won't work, unless there's something I need to do to quicktime settings to make it look like the older version so the piano software will recognize it and use it.
I realize I may be SOL here, but thought I would post in hopes that someone might have a solution. Thanks.

Ok, so you need to install this on multiple systems and need to determine what steps work and which ones don't as the variables that you can discern don't seem to play a role... repeating what appear to you to be the same steps on two different systems yields two different results. And, if this is a classroom setting, you don't want to have to depend on virtualization because the important thing is that the app is simple to access. I'd also guess that there's some other reason for the push to Vista or you'd have stayed with what works (I've worked in situations where, for whatever reasons, decisions are made and you just have to work with what you're dealt!)
I'd think you're correct in that there's probably not a provision for the latest QuickTime to behave like the older version as large portions of the API has been rewritten over the years.

Silent uninstall issue with JRE Version 1.7.0.60

Similar Messages

Maybe you are looking for