Silently/remotely upgrading clients from 10.6 to 10.7 via ARD/Script

Hi!
Apple finally made it possible to upgrade from a major OS (10.6 to 10.7) via an application running on the client, rather than having to boot of a DVD on 100 individual computers.
Does anyone know of a way to kick this installation procedure off remotely?
Currently I am remoting onto the machines via ARD and manually clicking the "Install Mac OS X Lion" app, then choosing Next, Next, Next, Install
it would be nice to be able to schedule this via an ARD task so the installer runs silently without the need to click on the GUI to kick off the installation.
Any ideas?
TIA!
FZ

I can add it's the same with upgrading to Lion... So I guess they changed some driver code between 10.6.7 and 10.6.8 and its not compatible with my logic board.
Annoying tbh..

Similar Messages

Issues with upgrading client from 1.2 to 3.0

I've upgraded a bunch of Mac's ARD client from 1.2 to 3.0 using ARD 3 admin's upgrade client feature. On some, I can't Observe or Control. So far I can copy files, run reports, and see current status. I can also ssh into machines with no problems. I've run the updater a second time and no go.
All of these Macs were on 10.3.6. So sshed into them and ran all updaters and repaired permissions. Then upgraded ARD client.
Any thoughts on whats the cause of this problem and how to remedy it?
Any suggestions is appreciated.

More info after some testing.
Noticed machines that started out with base OS 10.3.1 with subsequent updates are the ones having observe/control issue. Most update progressions: 10.3.2, 10.3.3, 10.3.6 combo, 10.3.9 combo.
Machines that started out with base OS 10.3.5 are not effected after upgrading to 10.3.9.
Repaired permissions, updated binding, re-applied 10.3.9 combo update to one machine with no change.
Removed client by taking following steps - KB 108021
$ sudo rm -rf /System/Library/CoreServices/Menu\ Extras/RemoteDesktop.menu
$ sudo rm -rf /System/Library/CoreServices/RemoteManagement/
$ sudo rm -rf /System/Library/PreferencePanes/ARDPref.prefPane
$ sudo rm -rf /System/Library/StartupItems/RemoteDesktopAgent/
$ sudo rm /Library/Preferences/com.apple.ARDAgent.plist not applicable in any of my configs
$ sudo rm /Library/Preferences/com.apple.RemoteManagement.plist
Built an client installer package using ARD 3 admin and still can't Observe/Control but most other items seem to function.
I'm suspecting this has to do with base OS these machines were built on. Running out of ideas. I would like to find out whats preventing me to control machine instead of rebuilding a bunch of machine. Any input is appreciated.

Upgrade Client from 11.2.0.1 to 11.2.0.3 on Windows 7 / INS-30071

Hi,
I want to upgrade the client (Administrator) on my system from 11.2.0.1 to 11.2.0.3. Is this not directly possible due the new Update mechanism in 11.2.0.2? I can choose "Upgrade client", but it fails with INS-30071, and I can't find any logs to analyze this error further. OS is Windows 7.

Pl identify which version of Win 7 - you will need Professional or higher - http://docs.oracle.com/cd/E11882_01/install.112/e24187/pre_install.htm#CIHIAGFG
All you need to do is to install 11.2.0.3 into a new ORACLE_HOME, then uninstall 11.2.0.1
"INS-30071" Error During Upgrade Oracle Client or Server From 11.2.0.2 To 11.2.0.3 [ID 1483670.1]
HTH
Srini

I can't upgrade clients from ARD admin

Hi all,
I am trying to upgrade all my client machines to ARD 3.3.2. But when I try doing this from ARD admin, it comes back failing with no error message returned. What could be causing this?
Thanks in advance...

Have you tried restarting the workstations and then trying the update? That's often cured the problem for me when an update fails.
Hope this helps.

RD Gateway issue from Mac Remote Desktop client - 503 RPC Error: c0021012

I have an employee who is able to use the Mac Remote Desktop client to connect to her office PC via RD Gateway, but after a short time she consistently has her connection dropped with a
503 RPC Error: c0021012. I've researched this a little and apparently it refers to an expected shutdown condition (RPC_P_CONNECTION_SHUTDOWN) rather than a true RPC "exception". Also, the error almost always occurs exactly
10 minutes after the connection is established, so I'm wondering if a timeout is occurring due to a heartbeat/keepalive not getting through, the expiration of a token or credential, or something similar(?). Any help would be appreciated, here's a section
from the log that shows one of her drops:
[2014-Jun-22 23:58:44] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jun-22 23:58:44] RDP (0): client version: 8.0.24875
[2014-Jun-22 23:58:44] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Jun-22 23:58:44] RDP (0): correlation id: 79b9ed3a-2198-784a-8805-0f1d292a0000
[2014-Jun-22 23:58:45] RDP (0): Resolved 'ourserver.oursite.com' to 'x.x.x.x' using NameResolveMethod_DNS(1)
[2014-Jun-22 23:58:45] RDP (0): Resolved 'ourserver.oursite.com'' to 'x.x.x.x' using NameResolveMethod_DNS(1)
[2014-Jun-22 23:59:50] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Jun-22 23:59:53] RDP (0): Exception caught: Exception in file '../../librdp/private/tlsendpoint_openssl.cpp' at line 116
    User Message : TLS1_ALERT_ACCESS_DENIED
[2014-Jun-22 23:59:53] RDP (0): Exception caught: Exception in file '../../librdp/private/tlsendpoint_openssl.cpp' at line 116
    User Message : TLS1_ALERT_ACCESS_DENIED
[2014-Jun-22 23:59:53] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Jun-22 23:59:53] RDP (0): correlation id: 79b9ed3a-2198-784a-8805-0f1d292a0000
[2014-Jun-22 23:59:53] RDP (0): Resolved 'ourserver.oursite.com'' to 'x.x.x.x' using NameResolveMethod_DNS(1)
[2014-Jun-22 23:59:53] RDP (0): Resolved 'ourserver.oursite.com'' to 'x.x.x.x' using NameResolveMethod_DNS(1)
[2014-Jun-22 23:59:53] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Jun-22 23:59:53] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Jun-22 23:59:54] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Jun-22 23:59:55] RDP (0): Server supports RAIL
[2014-Jun-22 23:59:55] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Jun-23 00:10:54] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 217
    User Message : The gateway failed to connect with the message: 503 RPC Error: c0021012
[2014-Jun-23 00:10:54] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 217
    User Message : The gateway failed to connect with the message:
503 RPC Error: c0021012
[2014-Jun-23 00:10:54] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Jun-23 00:10:54] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-23 00:10:54] RDP (0): ------ END ACTIVE CONNECTION ------

Hi,
Is there any error occur on the RD Gateway server? Please make sure that RPC, RPC Locator and RPC Endpoint Mapper service are running on the server. Also, please make sure that the RD gateway
server does not reach the maximum number of connections.
Thanks.
Jeremy Wu
TechNet Community Support

Uninstalling remote desktop client

Hello
OK - a newbie problem having been over zealous with google and not reading about what I was actually installing.
I was interestd in being able to remotely access my mac mini from Windows XP for when I'm at the office. After a bit of googling I turned up a prospective hit and installed the remote desktop client from here :
http://www.apple.com/support/downloads/appleremotedesktop21client.html
now, I have lost the ability to access the Sharing section of the System Preferences .. how do I get this back?? It now tells me that I cannot open the sharing options as they do no run on an Intel based mac ...
Am completely new to Macs, having used PC's for donkey's years .. guess I should have looked before leaping!
Help appreciated !

Hi fourier_2009 & welcome to discussions...
Seen this?
http://support.apple.com/kb/HT2577
Next time - triple check that anything you want to install is fully compatible with Snow Leopard. Otherwise, stay away and wait until you've had more time to learn your new computer in standard configuration first...take it to the nearest Apple Store and let the staff educate you a bit if need be

Specifying port in Remote Desktop Client Version 2.0

Hi,
I have a windows PC behind a router that I am trying to remote desktop to from my iMac. I am using the remote desktop client v2.o which I have downloaded from http://www.microsoft.com/mac/downloads.mspx?pid=Mactopia_RDC&fid=803F9438-8DF3-4 90F-92C6-0E0F92787DB8#viewer
As I am port forwarding on the router to the PC's private IP address, I need to be able to hit port 4000 on the router. When I type in the <hostname>:4000 on the iMac's remote desktop client, it does not like the port number. Would anyone know how I can establish a connection to a port other than 3389 using the Remote Desktop Client from my iMac?
Thanks in advance.

Hello BH,
Thank you for replying and posting the link you did. I would not like to change the listening port on the server side. From the remote desktop client, I would like to change the port that it makes a connection to. By default, if you type in a hostname, the client connects to port 3389. I would like it to establish a connection with port 4000 of the server.
Please let me know if you have any recommendations on how to do this. Thanks.

Client Migration from SCCM 2007 to SCCM 2012 via GPO

what
installation properties i can use to migrate client from sccm 2007 to sccm 2012 via gpo?
Thanks!!
Atenciosamente Julio Araujo

It all depends on your needs, I suggest that you look at this first :
All properties can be set by using GPO, it's not different from push.
http://technet.microsoft.com/en-us/library/bb632469.aspx
http://technet.microsoft.com/en-us/library/bb633010.aspx
http://social.technet.microsoft.com/wiki/contents/articles/25118.deploying-sccm-2012-r2-clients-using-group-policy.aspx
Benoit Lecours | Blog: System Center Dudes

Using CopyIntoItems from Copy.asmx from a remote soap client

Hello,
I have been working on a soap client that runs on a remote client (not on the SharePoint server) and is platform-independent so that it cannot use the SP Object Model. I have managed to get most of the functionality working using SharePoint web-services except for CopyIntoItems.
My target server is a SharePoint 2007 server and I have a Document Library set up so I can upload files into it.
My soap request looks as follows.
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"> <soap:Body>
<CopyIntoItems xmlns="http://schemas.microsoft.com/sharepoint/soap/">
<SourceUrl>http://null</SourceUrl>
<DestinationUrls>
<string>http://shpt.ad2010.local:35492/sites/targetsubsite/Test List/hello.txt</string>
</DestinationUrls>
<Fields>
<FieldInformation Type="Text" DisplayName="Test Column2" InternalName="Test_x0020_Column20" Id="{8c35c0ca-d578-47fd-b7f3-aed199141c86}" Value="Value 0" />
<FieldInformation Type="Text" DisplayName="Test Column3" InternalName="Test_x0020_Column30" Id="{6c0d3fe3-4f0d-4cff-997b-201747f83315}" Value="Value 1" />
</Fields>
<Stream>WW91IHNheSBoZWxsbywgSSBzYXkgZ29vZGJ5ZQ==
</Stream>
</CopyIntoItems>
</soap:Body>
</soap:Envelope>
The URL I am invoking this on is: http://shpt.ad2010.local:35492/sites/targetsubsite/_vti_bin/Copy.asmx
The response I get back is as follows:
<?xml version="1.0" ?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soap:Body>
<CopyIntoItemsResponse xmlns="http://schemas.microsoft.com/sharepoint/soap/">
<CopyIntoItemsResult>
0
</CopyIntoItemsResult>
<Results>
<CopyResult DestinationUrl="http://shpt.ad2010.local:35492/sites/targetsubsite/Test List/hello.txt" ErrorCode="DestinationInvalid" ErrorMessage="The Copy web service method must be called on the same domain that contains the destination url."/>
</Results>
</CopyIntoItemsResponse>
</soap:Body>
</soap:Envelope>
I am unable to find any help on the error mentioned here. I have tried setting the source URL to something valid (I have to make it up because there really is no source URL as I copy from the remote client).
I wonder if I can even use the CopyIntoItems request (or the Copy web-service as a whole) from a remote soap client, and whether it was only meant to be used for copies between SharePoint Sites. Any clues are much appreciated.

I am trying to use the copy.asmx service to upload a file from a custom sharepoint form into a document library, and I can only use javascript with jquery. (no visual studio)
I have a similar soap envelope.
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"> <soap:Body>
<CopyIntoItems xmlns="http://schemas.microsoft.com/sharepoint/soap/">
<SourceUrl>C://dir/file.txt</SourceUrl>
<DestinationUrls>
<string>http://[server]/sites/subsite/Demo List/sample.txt</string>
</DestinationUrls>
<Fields>
<FieldInformation Type="Text" DisplayName="Title" InternalName="Title" Id="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}" Value="Test Value" />
</Fields>
<Stream>base64Binary</Stream>
</CopyIntoItems>
</soap:Body>
</soap:Envelope>
I'm getting a 500 "internal server error" back.
Can anyone see what I'm doing wrong ?
Kris Blair

Upgrade Database from 10.2.0.5.0 to 11.2.0.3.0 in Silent Mode

Hello there,
Previously, I had posted a thread on how to upgrade database from 10.2.0.5.0 to 11.2.0.3.0 through the wizards provided (GUI-based) and had successfully upgraded the database. Now, I am attempting to upgrade the database from 10.2.0.5.0 to 11.2.0.3.0 once more but this time, in silent mode (console-based). Unfortunately, I am lack of knowledge regarding the installation of the software and upgrading the database in silent mode.
I managed to figure out this much so far:
1 . Traverse through the installation directory to the directory shown below:
       11.2.0.3 > Extracted > database > response
2 . Fill up the blanks of db_install.rsp file:
       oracle.install.option=INSTALL_DB_SWONLY
       SELECTED_LANGUAGES=en
       ORACLE_HOME=C:\Oracle\11g\DBSwLoc
       ORACLE_BASE=C:\Oracle\11g
       oracle.install.db.InstallEdition=EE
       oracle.install.db.EEOptionsSelection=false
       oracle.install.db.isRACOneInstall=false
       oracle.install.db.config.starterdb.memoryOption=true
       oracle.install.db.config.starterdb.installExampleSchemas=false
       oracle.install.db.config.starterdb.enableSecuritySettings=true
       oracle.install.db.config.starterdb.control=DB_CONTROL
       oracle.install.db.config.starterdb.automatedBackup.enable=false
       oracle.installer.autoupdates.option=SKIP_UPDATES
3 . Save new db_install.rsp file to a new location (shorter path name without spacing will be best recommended)
4 . Traverse through the installation directory to where the setup file is located.
5 . Execute the following command:
       setup.exe -silent -waitforcompletion -responseFile C:\db_install_updated.rspThe result I received is as shown below:
Starting Oracle Universal Installer...
Preparing to launch Oracle Universal Installer from C:\Users\...\Temp\OraInstall2012-12-13_03-16-43PM. Please wait ... [WARNING] - My Oracle Support Username/Email Address Not Specified
[SEVERE] - Provide the My Oracle Support password.
Please press Enter to exit...
Previously in the db_install_updated.rsp response file, I had set autoupdate option to SKIP_UPDATES but why does it still prompt me for the Oracle Support account?
Edited by: Maxwell T on Dec 13, 2012 4:05 PM

After running the command below to upgrade the current database (Oracle 10.2.0.5.0):
dbua -silent -sid DB01 -oracleHome C:\Oracle\10g\DBSwLoc -oracleBase C:\Oracle\10g -diagnosticDest C:\Oracle\11g -sysDBAUserName sys -sysDBAPassword password -autoextendFiles -upgradeTimezone -commonFileLocation C:\Oracle\11g\DBSwLoc\oradata\database -recompile_invalid_objects true -degree_of_parallelism 7 -dbsnmpPassword DefaultPassword1 -sysmanPassword DefaultPassword1 This is the result:
Oracle recommends gathering dictionary statistics prior to upgrading the database. Refer to the Upgrade Guide for Performing Pre Upgrade
UPGRADE_PROGRESS : 0%
UPGRADE_PROGRESS : 4%
Upgrading Oracle Server
UPGRADE_PROGRESS : 5%
UPGRADE_PROGRESS : 6%
UPGRADE_PROGRESS : 7%
UPGRADE_PROGRESS : 8%
UPGRADE_PROGRESS : 9%
UPGRADE_PROGRESS : 10%
UPGRADE_PROGRESS : 11%
UPGRADE_PROGRESS : 12%
UPGRADE_PROGRESS : 13%
UPGRADE_PROGRESS : 14%
UPGRADE_PROGRESS : 15%
UPGRADE_PROGRESS : 16%
UPGRADE_PROGRESS : 17%
UPGRADE_PROGRESS : 18%
UPGRADE_PROGRESS : 19%
UPGRADE_PROGRESS : 20%
UPGRADE_PROGRESS : 20%
UPGRADE_PROGRESS : 21%
UPGRADE_PROGRESS : 22%
UPGRADE_PROGRESS : 23%
UPGRADE_PROGRESS : 24%
UPGRADE_PROGRESS : 25%
UPGRADE_PROGRESS : 26%
UPGRADE_PROGRESS : 27%
UPGRADE_PROGRESS : 28%
UPGRADE_PROGRESS : 29%
UPGRADE_PROGRESS : 30%
Collecting information from database
UPGRADE_PROGRESS : 31%
UPGRADE_PROGRESS : 32%
UPGRADE_PROGRESS : 53%
Modifying and starting Oracle instance
UPGRADE_PROGRESS : 58%
Copying database files
UPGRADE_PROGRESS : 60%
Switching database files
UPGRADE_PROGRESS : 62%
UPGRADE_PROGRESS : 63%
ORA-01167: two files are the same file/group number or the same fileORA-00202: control file: 'C:\ORACLE\11G\FULLCLIENT\ORADATA\DATABASE\LV01\CTRLLV01.ORA'Any suggestions for this error?
Thank you in advance.

RDP via remote web workspace from Server 2012 R2 Essentials on Win 8 Client unable to connect to local printer.

Hi,
Having an issue redirecting to a local printer when using a remote desktop session initiated through from a Essentials 2012 R2 server via remote web workspace on a Win 8.1 client, it doesn't pick up the Local printer, or even give the option of which
local resources to use on connection, just goes straight through and displays the remote desktop on connection.
I know its not a server global policy issue as it works fine on a Win 7 client with the same user being able to print locally whilst in a RD session
Any idea's as to how I can resolve this issue and enable local redirected printing or at least give me the options of specifiying which resources to connect on the local machine at the start of a session.
It's complicated I think as the essentials box is acting as the gateway so I cannot setup a session directly, the certificates are all working correctly so I am confused as to whats causing the issue.
Any help would be appreciated.

Hi,
Thank you for posting in Windows Server Forum.
Please try to connect the printer with IP address and check the result. You can go through beneath article might helpful in your case.
Windows Server 2012 Essentials : Add a Network Printer
Try to change the selected print drivers:
1. Return back to the Devices and Printers window
2. Double click on your printer, and then double click on Customize your printer
3. Click on the Advanced tab, and change the print driver to the one we just installed.
4. If you wish, you can also click on the Sharing tab, and make the printer available.
More information.
Installing Network Printer to Windows Server 2012 Essentials
Hope it helps!
Thanks,
Dharmesh

Error in calling EJB Client from Remote Machine.

While running the client from local machine, it works perfectly.
But when I try to run the same client from remote machine it gives me the error.
I deployed the ejb in sun server 1.4 with jndi as "xxx.xxx.xxx.xxx/MyTemperature".
Following is the code snippet from the clint.
Context initial = new InitialContext();
          Object objref = initial.lookup("192.168.0.20/MyTemperature");
          home = (TemperatureHome) PortableRemoteObject.narrow(objref, TemperatureHome.class);
          Temperature degreeConverter = home.create();Following is the error
E:\EJBRemoteTest>java TempClient.TemperatureClient
May 14, 2008 10:00:24 AM com.sun.corba.ee.impl.legacy.connection.SocketFactoryCo
nnectionImpl <init>
WARNING: ORBUTIL.connectFailure
org.omg.CORBA.COMM_FAILURE:   vmcid: SUN minor code: 201 completed: No
        at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(O
RBUtilSystemException.java:1739)
        at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(O
RBUtilSystemException.java:1757)
        at com.sun.corba.ee.impl.legacy.connection.SocketFactoryConnectionImpl.<
init>(SocketFactoryConnectionImpl.java:74)
        at com.sun.corba.ee.impl.legacy.connection.SocketFactoryContactInfoImpl.
createConnection(SocketFactoryContactInfoImpl.java:77)
        at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.begin
Request(CorbaClientRequestDispatcherImpl.java:152)
        at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaC
lientDelegateImpl.java:121)
        at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClie
ntDelegateImpl.java:214)
        at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
        at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java
:69)
        at com.sun.enterprise.naming.SerialContext.getProvider(SerialContext.jav
a:58)
        at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:126
        at javax.naming.InitialContext.lookup(InitialContext.java:347)
        at TempClient.TemperatureClient.main(TemperatureClient.java:17)
Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection ref
used: connect
        at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSock
etFactory.java:520)
        at com.sun.corba.ee.impl.legacy.connection.SocketFactoryConnectionImpl.<
init>(SocketFactoryConnectionImpl.java:58)
        ... 10 more
Caused by: java.net.ConnectException: Connection refused: connect
        at sun.nio.ch.Net.connect(Native Method)
        at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:460)
        at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
        at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSock
etFactory.java:511)
        ... 11 more
Caught an unexpected Exception!
javax.naming.CommunicationException: Can't find SerialContextProvider [Root exce
ption is org.omg.CORBA.COMM_FAILURE:   vmcid: SUN minor code: 201 completed: N
o]
        at com.sun.enterprise.naming.SerialContext.getProvider(SerialContext.jav
a:66)
        at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:126
        at javax.naming.InitialContext.lookup(InitialContext.java:347)
        at TempClient.TemperatureClient.main(TemperatureClient.java:17)
Caused by: org.omg.CORBA.COMM_FAILURE:   vmcid: SUN minor code: 201 completed:
No
        at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(O
RBUtilSystemException.java:1739)
        at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(O
RBUtilSystemException.java:1757)
        at com.sun.corba.ee.impl.legacy.connection.SocketFactoryConnectionImpl.<
init>(SocketFactoryConnectionImpl.java:74)
        at com.sun.corba.ee.impl.legacy.connection.SocketFactoryContactInfoImpl.
createConnection(SocketFactoryContactInfoImpl.java:77)
        at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.begin
Request(CorbaClientRequestDispatcherImpl.java:152)
        at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaC
lientDelegateImpl.java:121)
        at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClie
ntDelegateImpl.java:214)
        at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
        at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java
:69)
        at com.sun.enterprise.naming.SerialContext.getProvider(SerialContext.jav
a:58)
        ... 3 more
Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection ref
used: connect
        at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSock
etFactory.java:520)
        at com.sun.corba.ee.impl.legacy.connection.SocketFactoryConnectionImpl.<
init>(SocketFactoryConnectionImpl.java:58)
        ... 10 more
Caused by: java.net.ConnectException: Connection refused: connect
        at sun.nio.ch.Net.connect(Native Method)
        at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:460)
        at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
        at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSock
etFactory.java:511)
        ... 11 moreThis is a stateless session bean.
Can anybody provide me solution for this
I also tried with java.util.Properties class but result is same.

You are running on Windows 9x or Me, right? The darn OS has 300 or so bytes allocated for environment by default.
Try setting the Initial environment to 4096 in the Properties|Memory tab for the batch file. That will get rid of "Out of environment space". The syntax error is another matter; Windows (except NT and derivatives) shells do not allow '=' in an environment variables value. You cannot overcome that. Some software (Sybase for instance) interprets # as = just because of that. Unfortunately, the JVM doesn't take such an approach.
Better, grab copies of Unix utilities for Windows (www.gnu.org) including the wonderful shell 'bash' and write .sh scripts, which are inherently more powerful.

What is the impact of upgrading JMS client from 3 to 5?

Hi,
I'm new to JMS client. Recently, I was tasked to look into re-writing
one of our old applications that was using JMS client 3.0.
The company is going to upgrade all the existing JMS client from
3.0 to 5.0 and Sonic MQ from 4.0 to 6.1
Please advise how should I go about doing it? Will there be any
major changes in my JMS client when it upgrades from 3 to 5?
It will be great if you can pinpoint me to any resources on the web that
I can read and research on.
thanks
Kenny

JDBC 10g works just fine against 9.2 database. See the interopeability matrix on the JDBC portal http://www.oracle.com/technology/tech/java/sqlj_jdbc/index.html
Kuassi - blog http://db360.blogspot.com/

Upgrade the Essbase Client from Version 11.1.2.1 to 11.1.2.2 on LINUX 64 BI

Hi All,
Can any one please let me know the process to upgrade the Essbase Client from Version 11.1.2.1 to 11.1.2.2 on LINUX 64 BIT Server. Is it possible to upgrade the essbase client alone or do we need to upgrade the Essbase Server as a whole? Also, does Essbase upgrade is possible from 11.1.2.1 to 11.1.2.2 on LINUX ?
If Essbase client upgrade is not possible, can you please tell the list of Files that need to be download to Install Essbase server V 11.1.2.2 on LINUX.
Thanks
Reddy

Have a read of the following doc in Oracle Support - "How to Install the Essbase Client Tools MaxL and ESSCMD on a Planning Server Installed on Unix Server [ID 1477705.1]"
I know the title of the doc is not exactly the same as the question but it gives you an idea of the process based on 11.1.2.2, the easiest solution is probably to apply the maintenance release to upgrade from 11.1.2.1 to 11.1.2.2
Cheers
John
http://john-goodwin.blogspot.com/

Upgrade Oracle client from 10.2.0.1 to 10.2.0.4

Hello Folks,
I need to upgrade oracle client software from 10.2.0.1 to 10.2.0.4 on Windows.
1) do I need to apply just 10.2.0.4 patch or do I have to apply 10.2.0.2 and 10.2.0.3 as well?
2) also do we get the separate software for upgrading client versions.
I am trying to check under Patches tab in metalink and unable to get any output.
thanks!

Hi,
1) do I need to apply just 10.2.0.4 patch or do I have to apply 10.2.0.2 and 10.2.0.3 as well?U can directly apply patchset 10.2.0.4 on client 10.2.0.1.
The patch number for patchset 10.2.0.4 is *6810189*
Regards,
X A H E E R ....

Silently/remotely upgrading clients from 10.6 to 10.7 via ARD/Script

Similar Messages

Maybe you are looking for