Silicon Integrated Systems (SiS) Display Adapter Drivers

Anyone know where I can find drivers for the SiS 5598/6326 Display Adapter for Solaris 8 on Intel ? Direction towards light appreciated (intended pun :-)

You may find a driver for SiS 5598, but not on the SiS web site.
They don't support drivers for Solaris. Related to the SiS6326 driver, I spent two days looking for one and I couldn't find it. Apparently the SiS video adapter is not compatible with Solaris8 intel.
If you want to get more information, there are more posts about SiS drivers on this forum.

Similar Messages

HP ENVY 17-j021nr Notebook PC Need Display adapter drivers for Windows 10

I upgraded to Windows 10 64 bit. After the install my side monitor did not come on. I thought I would have to manually update the drivers. After going to the hp support site: http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-17-Notebook-PC-series/5354973/model/5395122?sku=E0K86UA&ssfFlag=true#Z7_3054ICK0KGTE30AQO5O3KA30R1 I do not see any "video drivers" for my laptop. I also went to the Nvidia site, Downloaded and installed the drivers for the Nvidia Geforce GT 740m but that did not work. I did the "clean intall" option. I Called HP support. They said that i needed a higher level of support and transfered me to a different department. This unknown to me named department states that there is a fix for this. That I would have to pay for at least 1 day of support so they could remote into my system and correct the issue. I said how much? They said $100 I simple need drivers that will work for my video card so that I can start using the HDMI output on my laptop. I need the Nvida card to operate at peak performance at some point but for now I am simply asking for compatible display adapter dri vers.

I am having the same problem withmy display adaptors after updating to windows 10. I can't find any fix online. I think HP has not yet built an update for my driver. If anyone can help, please HELP!!! my driver is an AMD Radeon HD 8400 R3 Series.

Cover Flow - Display adapter drivers

Hi there, I know a lot of people have posted about this problem but I am wondering if anyone can help me out.
I am unable to use cover flow on my pc. I have made sure I have the latest itunes and quicktime. As far as drivers go this is my sticking point. I don't know if there are newer drivers for the display adapters. I have been to the manufacturers website (S3 Graphics) but it seems that it has been discontinued with no further support (I am not sure I am looking up the right drivers anyhow). The display adapter I have is S3 Graphics ProSavageDDR. The driver date is from 2003 (version 6.0.0.0).
Can any techie person help me out here. I would love to get cover flow working on this pc.
Thanks in advance
Poppetbed

Hi there, I know a lot of people have posted about
this problem but I am wondering if anyone can help me
out.
I am unable to use cover flow on my pc. I have made
sure I have the latest itunes and quicktime. As far
as drivers go this is my sticking point. I don't know
if there are newer drivers for the display adapters.
I have been to the manufacturers website (S3
Graphics) but it seems that it has been discontinued
with no further support (I am not sure I am looking
up the right drivers anyhow). The display adapter I
have is S3 Graphics ProSavageDDR. The driver date is
from 2003 (version 6.0.0.0).
Can any techie person help me out here. I would love
to get cover flow working on this pc.
Thanks in advance
Poppetbed
As there is no reply to your message i guess It aint fixed yet.
I've done updating graphics driver, directx, although havent tried updating quicktime cause it came with the itunes install.
What mode ius your graphics card displaying.
Right click in free sapce on desktop click properties then click the settings tab.
Mine is set at High 26.
The graphics card sown menu has options for high medium and "TRUE"

Using nvidia display adapter sted integrated graphics with onlocation

Posted this yesterday and thought it was going into the Onlocation forum, but it showed up in the Premiere Pro forum. Looks like all Onlocation posts are being directed to Premiere Pro forum. The most recent posts to the Onlocation forum are a month old. Maybe my mistake, I'm posting this again. The top of my screen shows "Adobe Community>Premiere Pro>OnLocation: Start a New Discussion in OnLocation.
INITIAL POST:
I'm attempting to ensure that Onlocation CS5 uses the fastest display adapter on my laptop. I have a Lenovo laptop with an i7 processor running Windows 7 Professional 64 bit. Under the Device Manager my listed display adapters include the integrated Intel(R) HD Graphics Family, and an Nvidia NWS 4200M card I bought to get the best possible performance when recording video with Onlocation. I've read about using the Nvidia display panel to select the higher power Nvida display under MANAGE 3D Graphics: Global Settings. The choices are: 1 Auto Select. 2. HIgh Performance Nvidia Processor. 3. Integrated Graphics.
I understand Auto Select is a battery saving device so the higher powered graphics card doesn't engage until it is needed.
But...it seems as though this only anticipates the Nvidia card would be used for 3D gaming. When I switch to "Program Settings" to add a program to the list that will always use the higher powered processor, Photoshop and Premiere and Encore are options, but On Location is not.
In this situation, is Onlocation using the Nvidia processor or the built in graphics card?
Should I use the BIOS setup to change the display adapter to nvidia?
Or is there no advantage to switching to the Nvidia display because Onlocation is a two diminsional program?
ADDITIONAL INFO: I looked at my computer's BIOS and it looks like it's set to use the integrated graphics unless more display power is required, when it shifts to the invida card. But I'd appreciate anyone with more knowledge about this weighing in. Hate to think I spent more for an nvidia card if it's not being used.

>Should I use the BIOS setup to change the display adapter to nvidia?
Yes - Dual video laptop problems
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Windows: how do I update the device driver for my video/display adapter?

Installed video drivers may not always support the functionality of the latest Flash Player. If Flash Player does not function correctly, updating the video drivers to the latest available version is one of the first steps to try. Below are instructions how to update the video drivers on Windows systems.
identify the manufacturer and type of your video card
open Device Manager: Start | Run | enter devmgmt.msc
open the Display Adapters drop-down; this will show you the installed video card:
identify the device driver version
right-click on your display adapter entry and select Properties
click on the Driver tab; this will show you the driver version and date:
go to the device manufacturer's support site and download the latest driver
NVIDIA cards: NVIDIA driver download page, or auto-detect
ATI cards: ATI driver download page, or auto-detect
Intel cards: Intel driver download page, or auto-detect
Matrox cards: Matrox driver download page
VIA cards: VIA Arena driver download page (redirects to 3rd-party download site)
SiS cards: SiS driver download page, or auto-detect
S3 cards: S3 driver download page, or auto-detect (option 2 on the download page)
follow the instructions on the manufacturer's support site
Note: some of the auto-detect utilities linked above will only run on Internet Explorer.

Hello,
Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Display Adapter

Greetings,
What's up dudes? I have MSI K7T266 Pro 2 motherboard and at the moment i have Gainward GeForce 2 MX/MX400 display adapter and very soon i have Asus GeForce 4 Ti4200 128 Mt display adapter. I'm a real bonehead when it comes to changing display adapter, can i leave this Geforce 2 MX/MX400 in the motherboard and install GeForce 4 Ti4200 on a different PCI slot?

Quote
Originally posted by osnavi
And I forgot to tell you, that before installing new v. card, you must uninstall all former v.card drivers.
Normally, I would agree wholeheartedly, however, in this situation, the drivers are the same. NVidia uses UDA, Unified Driver Architecture, thereby allowing the removal of one GeForce, and the installation of another exceedingly simple. I made a change from a GF2 to the current GF FX5200 by simply shutting down, swapping cards, and restarting.
As for adding a second display adapter to a system, if one is PCI, and the other AGP, it should work seamlessly. Even with the display adapters using the same exact chipset. It is not always successful, due to some limitations in the system, display adapters, operating system, or motherboard chipset. IRQ's can also create havok when trying this.
Unless there is a specific reason for wanting 2 seperate display adapters, I would just make the change from the GF2, to the GF4. If the GF2 is PCI, I would suggest getting an AGP GF4, not PCI. AGP will give better performance overall vs. PCI.
If you are simply wanting twin monitors, get a dual VGA AGP card. Just insure the AGP driver has been installed, which *should* happen automaticly with the VIA 4 in 1 drivers.

Unternehmenslösung gesucht X1 20A8 mit Microsoft Wireless Display Adapter Probleme

1 Business Case
Im Unternehmen kommen ThinkPad-Systeme der Baureihen Lenovo X1 Carbon, T440 und Yoga zum Einsatz. Die Kompaktbauform der X1 und Yoga-Baureihen machen es schwierig diese zur Präsentationszwecke geschäftlich an bestehende Präsentationsgeräte (Beamer) weiter zu benutzen. Dieses ist begründet durch folgende Gerätebeschränkungen: a.) Fehlende VGA-Adapter  b.) Niedrige Bildschirmauflösung 1024x768 (XGA) oder 1280x1024 (WXGA).
All o.g. Notebooks der aktuellen Baureihe erreichen inzwischen eine Auflösung in Höhe von 1920x1080 (Full-HD), der X1 übertrifft mit eine Auflösung von 2560 x 1440 sogar den Full-HD-Standard.
2 Marktlage
Notebooks ab der INTEL-Haswell Chipbaureihe (Bj 2014 und neuer) und Windows 8.1 vorausgesetzt, unterstützen alle samt Miracast ab Werk.
Bei Miracast handelt es sich um eine auf dem HDMI-Kabelstandard basierte Kabellose Video- und Tonübertragungsart bis maximal Full-HD.
Neben Microsoft mit Windows 8.1 unterstütz auch Google den Miracast-Standard, dieses erlaubt im optimalen Fall zusätzlich die Verwendung von Android Smartphones/Tablets ab Version 4.2.1 die Benutzung von Miracast vorbereitete Präsentationsgeräte.
Miracast Technology setzt auf einen Zusammenspiel von Grafikkarten- und Wireless-LAN-Treiber. Die Wireless-LAN-Übertragung erfolgt im Peer-Peer-Verfahren zum Präsentationsempänger. Diese Verbindung entsteht parallel zu einer eventuell bereits bestehende Wireless-LAN-Router-Verbindung in das Firmennetz / Heimnetzwerk oder Öffentliches Internet.
Intel WIDI (Intel Vorgängerstandard) wird durch Miracast ersetzt. aussagen zur folge soll Miracast weiterhin mit WIDI-Empfänger zusammen spielen können.
Während lichtstarke Full-HD-Beamer im Geschäftsumfeld weiterhin eine Investition in Höhe von € 3.500 oder mehr erfordern. So gibt es bereits großflächige TV-Präsentationsgeräte mit 55 und 60"   (140 cm - 150 cm) für unterhalb von € 1.000. Die zweite Gattung reicht für die optimale Versorgung von Besprechungsräume bis ca. 10 Personen.
3 Ziel
Bereitstellung einer zuverlässigen Unternehmenslösung auf Basis von Lenovo Notebooks, Windows 8.1, Miracast Empfänger welches:
Die Benutzung von TV-Geräte für kleine Besprechungsräume bis 10 Personen ermöglicht. - Aufrüstung vorhanden, mit HDMI-Schnittstelle versehene, Präsentationsgeräte für den drahtlosen Miracast-Empfang.
Darstellung einer PowerPoint-Präsentation sowie abspielen von Präsentations-Filme bis zur einer Auflösung in höher von Full HD mit 1910 x 1080, für die Rückwärtskompatibilität aber auch weniger und somit 1024 x 768 und 1280 x 1024.
Obwohl Miracast eine Tonübertragung von bis zu 5:1 unterstütz, so wird eine 2-Kanal-Stereoton als ausreichend angesehen.
Der Microsoft Wireless Display Adapter ist hat eine späten Martkeinritt und ist seit Sept 2014 auf den USA am Markt. In Deutschland ist dieser ab 01. Februar 2015 im deutschen Microsoft Store zu beziehen. Presseberichte zu folge gibt es keine Probleme.
4 Problembeschreibung
Dieser Thread beschäftigt sich allein mit eine Miracast Verbindungskombination bestehend aus:
Lenovo X1 Carbon Type 20A8 - Bios GRET43WW (1.20), Windows 8.1 Professional 64-bit - Build 9200
an
Microsoft Wireless Display Adapter - MicroosoftDisplayAdapter_C8 - deutsche Lieferung aus dem Microsoft Store mit Lieferdatum 2.2.2015
Aktuell ist ein Verbindungsaufbau mit Video- / Tonübertragung zwischen beiden Geräte nicht möglich.
4.1 Verhalten beim Verbindungsaufbau
Verbindungsaufbau wird initiiert
über Charms-Bar -> Geräte -> Projiziern -> Mit einer anderen Anzeige Verbinden – Auswahl der Gerät „MicrosoftDisplayAdapter_C8“
Verbindungaufbau beginnt
Computername erscheint am externen Bildschirm mit Meldung "Verbindung wird aufgebaut"
Miracast-Treiber werden korrekt und vollständig übertragen auf X1, diese kann betrachtet werden unter unter Charms-Bar -> Einstellungen -> PC-Einstellungen -> PC und Geräte -> Geräte
Nach einiger Zeit erscheint eine Abbruchmeldung.
3. Lösungsverlauf bisher…
3.1 Review Intel/ Miracast compatibility list unter http://supportkb.intel.com/wireless/wireless-display/templates/selfservice/intelwidi/#portal/1026/ar...
Intel Core i7-4600U Haswell CPU 2.10 Ghz - OK
Intel Wireless Adapter - Intel® Dual Band Wireless-N 7260 - OK
Intel HD Graphics Adapter - OK
3.2 Used Intel Driver Update Utility and updated
a.) Intel HD Grahics Driver for Windows 8.1 from 10.18.10.2960 to 15.36.14.64.4080
b.) Intel PROSet /Wireless Software and Drivers from 17.13.2.2 to 17.13.11.5
c.) Intel PROSet/Wireless Software for Bluetooth from 17.13.2.2 to 17.1.1411.01
3.3 Enable Logging
Um Miracast-Logging zu ermöglichen und zu aktivieren ist es erforderlich das ein Paarung zwischen PC und Miracast-Empfänger bereits erfolgt sind. Bei meinem Szenario war dieses der Fall.
Öffnen des Programm Regedit
Navigation zum Registry-Key [HKEY_LOCAL_MACHINE\Software\Intel Corporation\Intel WiDi]
Erstellung eines neuen 32bit DWORD Key namens "LogEnable" d.Wert setzen auf 1
Folgender Ordner auf der lokalen Festplatte erzeugen C:\Temp
Nach dem start einer Intel® WiDi/Miracast* Sitzung wird eine Logdatei erzeugt Bei mir C:\Temp\WiDiWinNext.20150207.143059.wdl
Die Logdatei ist kryptisch, und dient lediglich den Intel-Support.
4. Zusatz wissen.
a. Netgear Push2TV (PTV3000)
Test von Mitte 2014 – Zuverlässig im Verbindungsaufbau. Probleme bei Bildpropotionen wenn Auflösung niedriger Full-HD.
b LG-Systeme – Lenovo X1 läuft erfolgreich gegen folgende Miracast-Empfänger.
LG PF80G LED Beamer – Miracast integrierter ab Lichtschwacher 1000 Lumen Full-HD Home Beamer für < € 1000
LG55LB700V Full-HD TV – Mediamarktgerät mit integrierten Miracast-Empfänger
Geräteauslieferungen aus 4. Quartal 2014 – Test aus Januar 2015 - Verbindungsaufbau ist zuverlässig. Bild und Ton ist gut. Mauszeiger ist verzögert.
c. TVPeCee HDMI-Stick MMS-895mira+ Android basiert mit Miracast und iOS-Mirroring Kauf aus Nov. 2014, Test aus Dezember 2014.
Von 3 getestete Lenovo X1 läuft ein Gerät einwandfrei, 2 Geräte haben Probleme mit Verbindungsaufbau – Problem verhält sich wie oben beschreiben mit dem Microsoft Wireless Adapter.
d. Miracast Recierver für Windows
Im standard kann Windows 8.1 lediglich per Miracast senden. Der erste Miracast reciever für Windows 8.1 Liefert die Firma Airserver seit Dezember 2014 aus. Bisher war Airserver bekannt für Lösungen auf basis von Apples Airplay. Bisher habe ich hiermit noch keine Erfahrung.
e. Actionic ScreenBeam Pro Business Edition - Eine bisher durch die Firma Microsoft bevorzugte Lösung steht mit einer zweiten Miracast-Gerätegenation in den Startlöcher. Es handelt sich um eine Baureihe mit Enterprise-Unserstützung. Bisher nicht lieferbar.
5. Frage an die Community
Nach meiner bisherigen beaobachtung steckt Miracast (oder der Lenovo X1) noch in den Kinderschuhen.
Es wäre spannend zu erfahren welche Erfahrungen andere Community-Teilnehmer bisher mit dem Thema gemacht haben.

also....
ich habe einen Carbon X1 20A7005RGE und bei mir läuft alles anstandslos...
(Netgear Push2TV PTV3000 ,Microsoft Wireless Display Adapter etc..etc..).
melden sie sich bei mir ...ich weiss wo der fehler liegt.....der liegt bei ihnen sprich in den einstellungen..
und das hat überhaupt nichts mit Lenovo X1 oder Microsoft..oder Intel zu tun... etc..
mfg....Semy

ITunes 8 messes up display adapter

I have bought an iPhone and had to upgrade my iTunes (which was ver. 7.0.2 and worked just fine). So I upgraded using Apple Upgrade tool. After I restarted the system screen turned 65K colors 1024x769 and poped up a messageth at new hardware found. This hardware was VGA compatible device. I tried to uninstall it and install drivers for my display adapter (which was Intel GMA900). It didn't work. Restarts, drivers updates don't help. I restored the system and tried to install iTunes manually. Result is the same. It messes up my screen resolution and colours (that is noticeable, who know what else is broken).
I am guessing it installs its own drivers that conflict with existing ones.
How could it be fixed ?

I also am having the same problem.
Computer fine. Successfully load iTunes 8.x. Reload. My display adapter has been uninstalled. Only successful way back to "computer fine" is to use System Restore.
I have attempted to upgrade my driver for my display adapter using ATI's page and some other websites "driver update" packages, but eiter I am doing something wrong or there is something wrong with the package or my computer.
Anyone have any thoughts?

Win 8.1, Clean Install, No AMD Display Adapter Found

I have a C55D-B5203 AMD basec Laptop. After a restore from backup failure, I had to do a clean 8.1 install. The recovery partition was damaged. Only the Microsoft Basic Display Adapter is found, not the AMD adapter. I have tried to install the Catalyst based driver, but that also doesn't detect the A600 adapter. What should I try next?

Satellite C55D-B5203
Downloads here.
Essentially all the drivers and utilities at that site need to be installed for the laptop to operate as designed - and the order matters. You can stuggle with that if you have the time. I don't and would restore the hard disk to its original out-of-the-box contents using Toshiba recovery media.
If you failed to create recovery media, obtain it from Toshiba. Scroll down to Get Recovery Media here
See the instructions in the section Restoring from recovery media, which begins on p. 49 of the User's Guide.
Satellite/Satellite Pro C40/C50/C70-B Series User’s Guide

Trouble loading Mac driver for Display Adapter (connecting Mac to flat screen TV)

Howdy:
I'm trying to connect my Mac (OSX 5) to a flat screen TV. To do so I just bought a USB 2.0 to HDMI® Display Adapter w/ Audio (1920 x 1080). The mini CD containing the DisplayLink software drivers that came with the unit won't fit in my Mac CD drive. I then tried to download the correct driver from the DisplayLink website, "DisplayLink USB Graphics Macintosh Driver" which appears to be appropriate for OSX 5 (at http://www.displaylink.com/support/mac_downloads.php). This proceeds through the installation steps, then bombs out with the error message that "The following install step failed: run preinstall script for DisplayLink software. Contact the software manufacturer for assistance."
In the hopes of finding a compatible driver, I looked for an earlier version of the driver on the DisplayLink site, but couldn't find one.
Help!

Your 20" 2007 iMac has a mini-dvi video out. Forget about using usb and installing drivers and just use a mini-dvi to HDMI adapter and an HDMI cable instead.
Mini-DVI to HDMI Adapter
Then connect your audio line out (headphone) to your TV's audio in and you should be set to go.

Display adapter randomly resetting

I'm having two issues which may or may not be related. My display adapter keeps resetting itself. Sometimes it works and I can continue working.other times I get a screen full of vertical lines and have to reboot. The computer will also not bout or run on battery power. If it's on and I unplug the a.c. adapter it well shut off. Any ideas on how to solve my envy dv7 issues? It's windows 8 that I'm currently running after doing a complete restore yesterday in the hope that if would solve the problem. If didn't.
This question was solved.
View Solution.

ACCER,
Thanks for getting back to me. In all honesty, it seems like the hardware is starting to go.
However, my last suggestion is to reinstall the operating system. This is because their may be a software or virus causing the issues you are describing. It's a long shot, but since you will need to back everything up anyway, you might as well do this.
First, please ensure you backup your files. Here is information on how to do this: Backing Up Your Files (Windows 8)
Once this is done, it is safe to reinstall the operating system. Performing an HP System Recovery (Windows 8)
If the same situation occurs, the computer likely has faulty hardware. At that point, please contact HP phone support, or take it to a local repair shop to get it evaluated.
If you appreciate the information I provided, please mark my posts with Kudos and "Accept as Solution"! It would be helpful to me, and help anyone else come across this information in the future.
I will look forward to your reply!
Mario
I worked on behalf of HP.

System-config-display, gnome-display-properties - inconsistent R5 U5 64bit

Hi all,
I have OEL Rel 5 U5 (64-bit) installed and running on an IBM x3200 which has Radeon integrated graphics, with a IBM ThinkVision LCD monitor (1280x1024 max)
Problem I have is eventhough system-config-display lets me select 1280x1024 I can't actually get it to switch. Upon log-off/log-in, reboot, restart, etc... it still returns to 1024x768 mode.
Running gnome-display-properties only gives me a choice of 1024x768, 800x600, or 640x480.
I've also tried xrandr and trying to force it to 1280x1024 but it tells me I only have the 3 choices given by gnome-display-properties.
My xorg.conf file is configured with 1280x1024, 1024x768, and 800x600 modes, so I'm baffled at where gnome-display-properties and xrandr are getting their mode choices...
Can anyone shed some light on this?

Based on Xorg log I'm guessing the monitor driver just will not support the higher res and apparently that's where 'gnome-display-properties' gets its info regardless of what I try in Xorg.conf.
I'll see if I can manipulate the monitor settings and see where that gets me...
I see the following in the log:
(II) RADEON(0): Monitor1 EDID data ---------------------------
(II) RADEON(0): Manufacturer: IBM Model: 29a Serial#: 16843009
(II) RADEON(0): Year: 2003 Week: 16
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 30 vert.: 23
(II) RADEON(0): Gamma: 1.00
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 65.0 MHz Image Size: 300 x 225 mm
(II) RADEON(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Serial No: Reserved
(II) RADEON(0): Monitor name: IBM RSA2
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): DFP table revision: 3
(II) RADEON(0): Panel infos found from DDC detailed: 1024x768
(II) RADEON(0): Valid Mode from Detailed timing table: 1024x768
(II) RADEON(0): Valid Mode from standard timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Total of 12 mode(s) found.
Here's video info from lspci:
0a:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA controller])
     Subsystem: IBM Unknown device 0325
     Flags: bus master, stepping, fast Back2Back, medium devsel, latency 66, IRQ 11
     Memory at d8000000 (32-bit, prefetchable) [size=128M]
     I/O ports at 6000 [size=256]
     Memory at d0800000 (32-bit, non-prefetchable) [size=64K]
     [virtual] Expansion ROM at d0820000 [disabled] [size=128K]
     Capabilities: [50] Power Management version 2
Xorg.conf:
# Xorg configuration created by system-config-display
Section "ServerLayout"
     Identifier "single head configuration"
     Screen 0 "Screen0" 0 0
     InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
     Identifier "Keyboard0"
     Driver "kbd"
     Option     "XkbModel" "pc105"
     Option     "XkbLayout" "us"
EndSection
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
     Identifier "Monitor0"
     ModelName "LCD Panel 1280x1024"
### Comment all HorizSync and VertSync values to use DDC:
     HorizSync 31.5 - 64.0
     VertRefresh 56.0 - 65.0
     Option     "dpms"
EndSection
Section "Device"
     Identifier "Videocard0"
     Driver "radeon"
     Option     "AccelMethod" "UXA"
EndSection
Section "Screen"
     Identifier "Screen0"
     Device "Videocard0"
     Monitor "Monitor0"
     DefaultDepth 16
     SubSection "Display"
          Viewport 0 0
          Depth 24
          Modes "1280x1024" "1024x768" "800x600"
     EndSubSection
     SubSection "Display"
          Viewport 0 0
          Depth 16
          Modes "1280x1024" "1024x768" "800x600"
     EndSubSection
EndSection

In systems preferences display there is no arrangement tab, in systems preferences display there is no arrangement tab

in systems preferences display there is no arrangement tab
i had it in OSX 10.8 but not in mavricks

The Mac uses a heavily parameterized Driver for the graphics cards, rather than drivers for each attached display. For this reason, displays MUST respond to requests for their identity and capabilities, so that the parameters can be set properly to get a picture.
You can see whether the display has responded to the request by looking in:
About this Mac > ( More Info ) > Graphics & Displays
to check for the name of the display. "No Display Connected" is exactly the problem you need to solve. Sometimes the ( Detect Displays ) button will help, but sometimes the Display itself needs its settings changed so that it knows the HDMI port is actively connected to a computer.
[√] Mirror displays is RARELY helpful, because it requires both the built-in and the TV to use the same resolution. This does not work very often -- one or the other may go dark. Uncheck this until you get it going.

Messaging system and XI Adapter

Hi Experts,
I've came across a scenario /people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi which explains "message flow in XI".
Q1. my question is under "RETURN JOURNEY" section in Point 1. the author is saying "So the XI Integration server will send the message to the messaging system of the Adapter Engine (AE)" i want to know what is message system and its purpose? will it store converted messages.
Q2. wht does an XI Adapter do and wht is the purpose of using it?
thanks
Faisal
points will b rewarded for useful answers.....

Hi Abdul,
Q1. my question is under "RETURN JOURNEY" section in Point 1. the author is saying "So the XI Integration server will send the message to the messaging system of the Adapter Engine (AE)" i want to know what is message system and its purpose? will it store converted messages.
http://help.sap.com/saphelp_nw04s/helpdata/en/8f/d906d01f77fa40a4c84683c3f8326f/frameset.htm
Purpose
You use the Adapter Engine to connect the Integration Engine to SAP systems (RFC adapter) and external systems. You use the various adapters in the Adapter Engine to convert XML- and HTTP-based messages to the specific protocol and format required by these systems, and the other way around.
Q2. wht does an XI Adapter do and wht is the purpose of using it?
Purpose
You configure the XI adapter to exchange messages with an Integration Engine. Both XI 3.0 and XI 2.0 message protocols are supported. You also use the XI adapter to exchange messages between SAP Exchange Infrastructure and the Partner Connectivity Kit (PCK).
You can use security settings to sign messages and check the signature. You can encrypt and decrypt message payloads.
Features
·        To receive XML messages from a sender system, configure the sender XI adapter.
If messages are sent from the Integration Server to the PCK, you must create a sender XI adapter in the PCK.
·        To send XML messages to a receiver system, configure the receiver XI adapter.
If messages are sent from the PCK to the Integration Server, you must create a receiver XI adapter in the PCK.
XI Adapter in the Integration Server
A communication channel with a receiver XI adapter can be created automatically for business systems that are defined in the System Landscape Directory. See also: Creating Communication Channels Automatically
regarding security setting,, check below
http://help.sap.com/saphelp_nw04/helpdata/en/86/0222417c22f323e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/06/e92041c877f623e10000000a155106/frameset.htm
   XI adapter sends the data through XI protocol which works on HTTP and XML.
So, security for XI adapter means
1) HTTPS(Communication channel security)
2) Message Level Security( You can send messages further in encrypted form)
The communication via web service may have advantages, if you want communicate with non XI systems.
In your scenario, there is direct communication between XI engines, so you can go for XI adapter. The XI adapter which is normally used to configure the exchange of messages with in an Integration Server, canbe extended to exchange messages between the two Integration Servers in the scenario.
Please verify if if you have the common SLD for both XI systems. its preferable to go for seperate SLDs
Check out the similar threads, XI to XI scenarios:
XI adapter there is one option "Security Settings"..
You can do client authentication, 128-bit encryption etc
btw,we can do kind of data encryption in the mapping with java classes and you can pass the value.. but it is just a data level or message level
But generally use cerfticates in the adapters for the secuity purpose. these will help you to give more inputs
/people/rahul.nawale2/blog/2006/05/31/how-to-use-client-authentication-with-soap-adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0650f56-7587-2910-7c99-e1b6ffbe4d50
Thanks,
Satya Kumar

1,280 x 1,024 32-bit color video display adapter (true color) 128 MB or greater, Direct3D capable

I want to run AutoCad 2009 and work in 3d. Which lenovo meets the minimum reqs.? i.e. Intel or AMD Dual Core processor, 2.0 GHz or greater • 2 GB RAM or greater • 2 GB free hard disk available not including installation • 1,280 x 1,024 32-bit color video display adapter (true color) 128 MB or greater, OpenGL®, or Direct3D® capable workstation class graphics card. For Windows Vista, a Direct3D-capable workstation-class graphics card with 128 MB or greater is required.
Which model is the least exspensive with the minumum reqs.?
Clarification: I want to run AutoCad 2009 in 3d. Re: 1,280 x 1,024 32-bit color . . .
Note from Moderator: Please don't post the same message in multiple boards/threads as it splinters the discussion. Duplicate(s) removed.
Message Edited by JaneL on 02-08-2009 10:01 PM
Solved!
Go to Solution.

Any ThinkPad with discrete or switchable graphics will work...T400/500, R400/500, W500/700...make sure that you're not getting the one with Intel integrated GPU and you'll be all set...
FWIW, even T61/p with discrete GPU will run this with no sweat...
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Silicon Integrated Systems (SiS) Display Adapter Drivers

Similar Messages

Maybe you are looking for