Silicon S-ATA raid message on boot?

The Silicon S-ATA raid message on boot stays there for (what seems like) an enternity. Can I shorten the time the message is displayed (or go somewhere and disable it?). Thanks! [stats are in sig]

Hi, Yes you can disable it in the bios.  Not sure what bois you are running but it is in there.
Try entering cmos. 4th line down on the left.(advance chipset features)
then the 3rd optioin. (Onboard device)
At the botton of the list you will see onboard sil3132 raid disable enable.  Disable it. save and exit.
Sorry for the line refference but I cannot remember what the line titles are called. (guessed at titles)
Hope you find it ok.

Similar Messages

  • I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2011 MBP upgraded to Mavericks.

    hello,
    And thank you in advance.
    I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 20011 MBP upgraded to OS X 10.9 Mavericks. Any ideas?
    I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive. I tried to create an iso image from my Windows XP machine but recieved messages that Windows 8.1 could not run on XP.  I've ordered the Windows 8.1 backup media.
    Any way to proceed?
    Thanks  Tim

    download the win 8 iso from here;
    http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
    then start over. install on to your usb along with the support software.

  • Installer disk not found message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks?

    I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks. Any ideas?
    I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive.
    Thanks  Tim 

    You might have better luck in the Boot Camp community. I'll ask the hosts to relocate your post.
    Boot Camp Community

  • Warning message on boot.

    I have a Netra ct800 running Solaris 5.8 Generic_108528-07.
    As the machine is coming up I notice a warning message which reads:
    "WARNING: scsb: HSC not initialized or AC not present!"
    My question is, what is this message trying to tell me.
    Is the a repository of error and warning messages that I can search?
    I ruled out AC for the 120v power line. The machine runs on -48 volts in the telco office.
    Thanks.
    Jim

    I had been noticing the fast tsc calibration failed message at boot for quite a long time on my old Samsung Q35 which is a BIOS boot netbook with arch running the x86 system. The message has continued to show up through many kernel updates including 3.17.4-1-ARCH.
    After doing a bit of research I found a simple solution to getting rid of this warning during boot. In my case I use grub as the bootloader and that is where a workaround is possible.
    I edited the following two lines in /etc/default/grub to add in "clocksource=tsc":
    GRUB_CMDLINE_LINUX_DEFAULT="quiet clocksource=tsc"
    GRUB_CMDLINE_LINUX="clocksource=tsc"
    Then regenerated the grub.cfg file with:
    grub-mkconfig -o /boot/grub/grub.cfg
    After rebooting the machine the tsc calibration warning no longer appears.  Presumably similar workarounds are available for other bootloaders also.
    Hope this may help even though I only discovered this workaround 5 months after this thread had its last post!
    Last edited by mcloaked (2014-12-05 21:42:27)

  • Error Message at Boot-Up

    WRT54GX router with Wireless-G adapter ; I get the following error message at boot - "Query My Ca Information: InfoMyCa.exe - Ordinal Not Found - The ordinal 968 could not be located in the dynamic link library LIBEAY32.dll "
    Any help eliminating this message would be appreciated .

    Hi Bettybee2, and a warm welcome to the forums!
    As for deletion, feel free to switch iDisk Sync off and then toss the disk image. If you see a warning that the file is busy when you try to empty the Trash, log out and back in again and then empty the Trash.
    http://www.macworld.com/article/134651/2008/07/massiveidiskarchive.html

  • [SOLVED] strange messages while booting

    Hi everyone.
    Since upgrading open source video card driver (xf86-video-ati), I get the following messages while booting:
    Fri Mar 30 10:26:25 2012: Found hardware: "HDA-Intel" "Realtek ALC272" "HDA:10ec0272,1179ff82,00100001" "0x1179" "0xff00"
    Fri Mar 30 10:26:25 2012: Hardware is initialized using a generic method
    Fri Mar 30 10:26:25 2012: Found hardware: "HDA-Intel" "ATI R6xx HDMI" "HDA:1002aa01,00aa0100,00100100" "0x1179" "0xff80"
    Fri Mar 30 10:26:25 2012: Hardware is initialized using a generic method
    What does they mean?
    Last edited by digitalone (2012-03-31 12:04:34)

    skottish wrote:It's in the ALSA section of the wiki. Just search for 'generic'.
    Thanks, that helped me.

  • Strange message while booting up.

    I get this message while booting and am wondering if anyone knows how to correct the problem.
    Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
    I haven't found any solutions or much explanation of what it is using google.

    When I read the message I felt brave enough to try installing this mysterious tomoyo-tools, system boots fine like I didn't have it and it's happened about for a week. I forgot to have installed that.
    Today my machine have had strange message and didn't boot, I've tried the fallback and the first time has worked. From fallback I have reinstalled tomoyo-tools, thinking some upgrade could have broken the package.
    Well, reboot the machine and system still not booting, neither fallback this time. WTH!
    I've used the livecd to move the binary /sbin/tomoyo-init (yes of course I can chroot and pacman -R but moving the binary was enough), booting correctly and pacman -R it.
    The last message written was about kernel start etc, and the system stuck.

  • GT683: swapping RAID0 HD config for non-RAID/AHCI SSD boot drive

    A question re: MSI skus which come with 2x HDs in RAID0 config. My system (GT683DXR-603US sku) came with 2x 500GB HDs (WD5000BEKT) in RAID0 config.
    First thing I did was to replace this with a Crucial M4 256GB ssd, though prior to this I took an image of the stock system (prior to even booting it up the first time) and restored said image onto the SSD.
    The first time I booted off the SSD (no other HD in the unit, as I pulled both of the WD 500GB out to try the SSD alone), I went into the BIOS and changed the SATA config from RAID to AHCI. But Win boot cycle almost immediately resulted in a blue screen. I then changed SATA config from AHCI to IDE, w/the same boot result. Finally, set the BIOS config back to the original RAID, and Win7 booted fine.
    Upon confirming SSD Win7 boot and testing operation successfully, I pulled the SSD, place the 2x 500GB HDs back in the system, just long enough to break the RAID 0 array.
    Replaced the SSD in the primary bay, and left one of the 500GB HDs in the 2nd bay, and that's how I'm using the system now: Crucial M4 SSD boot drive, WD Scorpio 500GB data drive ... with the BIOS SATA config set to RAID mode.
    So the system is working now, but question is - should I pursue trying to change the BIOS setting from RAID to AHCI mode? I'm thinking that in order to get the SATA 6Gbps performance out of the Crucial M4, the Intel SATA config needs to be set to AHCI ... yet apparently I first need to modify the Win7 config (the SATA driver, perhaps?), before I can modify the BIOS sata config?
    Any suggestions would be appreciated!

    bump ... any thoughts? I'm thinking to leave my sysetm in RAID mode, as from what I've read recently Intel storage mgr supports TRIM in RAID mode as well as AHCI.

  • Laptop mode -- where to find error messages on boot

    Hi guys,
    I get some error messages when booting. I have the time to read that they are related to laptop-mode, but they quickly disappear.
    I have activated the ENABLE_LAPTOP_MODE_TOOLS in my laptop-mode.conf file, but I can't find the error messages in /var/log :
    /var/log » ll nico@cotier
    total 2152
    -rw-r--r-- 1 root users 24082 20 mars 11:30 Xorg.0.log
    -rw-r--r-- 1 root users 24084 20 mars 10:35 Xorg.0.log.old
    -rw-r--r-- 1 root users 28050 1 juin 2013 Xorg.1.log
    -rw-r--r-- 1 root users 27492 1 juin 2013 Xorg.1.log.old
    -rw-r--r-- 1 root bumblebee 13679 1 juin 2013 Xorg.8.log
    -rw------- 1 root utmp 18816 20 mars 10:18 btmp
    -rw------- 1 root root 32032 20 mars 11:29 faillog
    drwxr-xr-x 2 root root 4096 16 juin 2013 httpd
    drwxr-sr-x+ 3 root systemd-journal 4096 1 juin 2013 journal
    -rw-r--r-- 1 root root 292292 20 mars 11:29 lastlog
    drwxr-xr-x 2 root root 4096 14 mars 2013 old
    -rw-r--r-- 1 root root 159892 19 mars 14:55 pacman.log
    -rw-r--r-- 1 root root 77572 5 oct. 00:47 pm-powersave.log
    -rw-r--r-- 1 root root 3586 1 juin 2013 slim.log
    drwxr-xr-x 2 root root 4096 9 mars 2013 speech-dispatcher
    -rw-rw-r-- 1 root utmp 1745280 20 mars 11:45 wtmp
    Do you know where they might be?
    Thanks!

    grep all these logs and systemd's journal.
    If you have 'quiet' on the kernel line of your bootloader, remove it.
    Last edited by karol (2014-03-20 11:52:42)

  • Udev-acl error message when booting after removing consolekit

    Hi all,
    I remove consolekit (using pacman -Rdds consolekit) after the announcement, but when I reboot I see a lot of error messages (although my system boots OK):
    Nov  1 19:43:42 localhost systemd-udevd[1122]: failed to execute '/usr/lib/udev/udev-acl' 'udev-acl --action= --device=': No such file or directory
    Sure enough, no udev-acl executable under /usr/lib/udev
    any idea on how to get rid of this annoying message on booting?

    Interestingly problem not there on my 32 bit system on my netbook, only on my 64-bit [multilib] desktop

  • Pease help error message panic cpu 0 caller 0x563ebd Unable to find driver for this platforlease help error message on boot up// panic cpu 0 calller 0x563ebd unable to find driver for this platform

    please help errror message panic cpu 0 caller 0x563ebd Unable to find driver for this platform) i started recieving this message upon booting up with the start up chime after foolishly deleting the Apple USB ethernet host in teh system/extensions folder.I Was hoping this would be a repair for a minor error message i was recieving after a recent itunes update & it has gone from minor error message to system no start.any suggestions,i dont have the original snow leopard OSX install disc but if i get one will this fix the problem or have i destroyed my mac,,please help

    Hello jayparks41
    There are a few things to try and the article below can walk you through them before trying to hunt down a Snow Leopard install disk. I will say that it may come down to reinstall Snow Leopard but also before any troubleshooting, make sure to have a safe copy of your data.
    OS X: About kernel panics
    http://support.apple.com/kb/TS3742
    Mac OS X 10.6: Reinstalling Mac OS X
    http://support.apple.com/kb/PH6606
    Regards,
    -Norm G.

  • [SOLVED] How to disable these messages at boot?

    So I managed to install Arch, and set up the network. I have a Broadcom 4313 wireless chip, all I had to do is blacklist the bcma module, because it conflicted with the brcmsmac module, both are loaded by default (no need to add anything to MODULES=(), only the blacklist bcma entry to modprobe.conf)
    So now I have a wlan0 interface that works perfectly fine, only I get these status messages during boot, that are totally unnecessary, see screenshot. These just pop up from nowhere, and annoy the heck out of me, disrupting the login and whatnot.
    So can these be turned off somehow? I suspect they come from the brcmsmac module itself.
    http://dl.dropbox.com/u/20678367/arch-n … ssages.png
    Mod edit:
    The image is too large: https://wiki.archlinux.org/index.php/Fo … s_and_Code
    Last edited by bernarcher (2011-10-18 19:16:57)

    junkie wrote:
    Gusar wrote:Add "dmesg -n 3" to /etc/rc.local
    That seems to solve my problem, thank you!
    Just out of curiosity, what numbers, or levels are available for the -n switch? The man doesn't state that.
    http://mailman.archlinux.org/pipermail/ … 21114.html
    https://bbs.archlinux.de/viewtopic.php?pid=267954 (it's from the German Arch forum, but the loglevel= stuff is in English)
    Full list: http://www.kernel.org/doc/Documentation … meters.txt
    Last edited by karol (2011-10-18 14:02:47)

  • Only one HDU on ctrl ATA RAID

    Hi!
    It is possible to use connector ATA RAID with a solo harddisk (in modality stipe)? Thanks.
    Federico

    it would be but its a bit pointless as it can only be slower
    http://www.msi.com.tw/program/service/forum/index.php?threadid=292&boardid=16&styleid=1

  • Error messages when booting up

    Receive 3 error messages when booting up PS using Win 8. "Could not load the FastCore Routines Module, could not load the MMX Core, could not load the Multiprocess Support Module." Any explanation?

    Ah-ha! Seems there are two Adobe program folders, one under Program Files and one under Program Files (x86). I did not know about the one under Program Files.
    According to System Info:
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
    Creative Cloud app keeps wanting to update Photoshop CC but keeps failing. The error code is U44M1P7.
    Following is all of the System Info, showing the third-party plug-ins that I installed a few hours ago from onOne and Topaz. I can't see anything odd in this, and System Info says all the plug-ins loaded.
    Thanks for your help.
    Quote
    Adobe Photoshop Version: 14.1.2 (14.1.2 20130923.r.427 2013/09/23:23:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 2
    Logical processor count: 4
    Processor speed: 3093 MHz
    Built-in memory: 6088 MB
    Free memory: 4429 MB
    Memory available to Photoshop: 5289 MB
    Memory used by Photoshop: 59 %
    Image tile size: 1024K
    Image cache levels: 4
    Display: 1
    Display Bounds: top=0, left=0, bottom=900, right=1600
    OpenGL Drawing: Enabled.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Drawing Mode: Basic
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    NumGPUs=1
    gpu[0].OGLVersion="3.0"
    gpu[0].MemoryMB=2108
    gpu[0].RectTextureSize=8192
    gpu[0].Renderer="Intel(R) HD Graphics 2000"
    gpu[0].RendererID=258
    gpu[0].Vendor="Intel"
    gpu[0].VendorID=32902
    gpu[0].HasNPOTSupport=1
    gpu[0].DriverVersion="9.17.10.3347"
    gpu[0].Driver="igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumd32,igd10umd32,igd10umd32"
    gpu[0].DriverDate="20131031000000.000000-000"
    gpu[0].CompileProgramGLSL=1
    gpu[0].TestFrameBuffer=1
    gpu[0].OCLSupported=0
    gpu[0].CUDASupported=0
    gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 - Intel Build 9.17.10.3347"
    gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447]
    gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
    gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[16]
    gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
    gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
    gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
    gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[512]
    gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[1024]
    gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[41]
    gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
    gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
    gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
    gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
    gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
    gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
    gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
    gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
    gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
    gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
    gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=0
    Serial number: 96040202581963319193
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
    Temporary file path: C:\Users\RUSSEL~1\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      C:\, 1.35T, 1.10T free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
    Installed components:
       ACE.dll   ACE 2013/07/14-12:09:50   79.543790   79.543790
       adbeape.dll   Adobe APE 2013/02/04-09:52:32   0.1160850   0.1160850
       AdobeLinguistic.dll   Adobe Linguisitc Library   7.0.0  
       AdobeOwl.dll   Adobe Owl 2013/03/03-12:10:08   5.0.13   79.533484
       AdobePDFL.dll   PDFL 2013/03/13-12:09:15   79.499517   79.499517
       AdobePIP.dll   Adobe Product Improvement Program   7.0.0.1786  
       AdobeXMP.dll   Adobe XMP Core 2013/03/13-12:09:15   79.151481   79.151481
       AdobeXMPFiles.dll   Adobe XMP Files 2013/03/13-12:09:15   79.151481   79.151481
       AdobeXMPScript.dll   Adobe XMP Script 2013/03/13-12:09:15   79.151481   79.151481
       adobe_caps.dll   Adobe CAPS   7,0,0,21  
       AGM.dll   AGM 2013/07/14-12:09:50   79.543790   79.543790
       ahclient.dll    AdobeHelp Dynamic Link Library   1,8,0,31  
       aif_core.dll   AIF   5.0   79.534508
       aif_ocl.dll   AIF   5.0   79.534508
       aif_ogl.dll   AIF   5.0   79.534508
       amtlib.dll   AMTLib (64 Bit)   7.0.0.169 BuildVersion: 7.0; BuildDate: Mon Apr 8 2013 2:31:50)   1.000000
       ARE.dll   ARE 2013/07/14-12:09:50   79.543790   79.543790
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2013/07/14-12:09:50   79.543790   79.543790
       BIBUtils.dll   BIBUtils 2013/03/19-12:09:02   79.535293   79.535293
       boost_date_time.dll   DVA Product   7.0.0  
       boost_signals.dll   DVA Product   7.0.0  
       boost_system.dll   DVA Product   7.0.0  
       boost_threads.dll   DVA Product   7.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.1.6.30929   2.1.6.30929
       CITThreading.dll   Adobe CITThreading   2.1.6.30929   2.1.6.30929
       CoolType.dll   CoolType 2013/07/14-12:09:50   79.543790   79.543790
       dvaaudiodevice.dll   DVA Product   7.0.0  
       dvacore.dll   DVA Product   7.0.0  
       dvamarshal.dll   DVA Product   7.0.0  
       dvamediatypes.dll   DVA Product   7.0.0  
       dvaplayer.dll   DVA Product   7.0.0  
       dvatransport.dll   DVA Product   7.0.0  
       dvaunittesting.dll   DVA Product   7.0.0  
       dynamiclink.dll   DVA Product   7.0.0  
       ExtendScript.dll   ExtendScript 2013/03/21-12:10:31   79.535742   79.535742
       FileInfo.dll   Adobe XMP FileInfo 2013/03/19-12:09:02   79.151561   79.151561
       filter_graph.dll   AIF   5.0   79.534508
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       imslib.dll   IMSLib DLL   7.0.0.116  
       JP2KLib.dll   JP2KLib 2013/02/19-12:28:44   79.248139   79.248139
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libiomp5md.dll   Intel(R) OMP Runtime Library   5.0  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0  
       LogSession.dll   LogSession   2.1.2.1785  
       mediacoreif.dll   DVA Product   7.0.0  
       MPS.dll   MPS 2013/03/15-13:25:52   79.535029   79.535029
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       ONCore7.dll   ONCore   7.0.0.0  
       ONCore8.dll   ONCore   7.0.0.0  
       ONCoreFoundation7.dll   ONCoreFoundation7   7, 0, 0, 0  
       ONCoreFoundation8.dll   ONCoreFoundation7   7, 0, 0, 0  
       ONDocument7.dll   ONDocument   7.0.0.0  
       ONDocument8.dll   ONDocument   7.0.0.0  
       ONProxySupport7.dll   ONProxySupport   1.0.0.0  
       ONProxySupport8.dll   ONProxySupport   1.0.0.0  
       PatchMatch.dll   PatchMatch 2013/06/11-12:08:08   79.542390   79.542390
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CC   CC  
       Plugin.dll   Adobe Photoshop CC   CC  
       PlugPlugOwl.dll   Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit)   4.0.1.34  
       PSArt.dll   Adobe Photoshop CC   CC  
       PSViews.dll   Adobe Photoshop CC   CC  
       SCCore.dll   ScCore 2013/03/21-12:10:31   79.535742   79.535742
       ScriptUIFlex.dll   ScriptUIFlex 2013/03/21-12:10:31   79.535742   79.535742
       svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0  
       tbb.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003  
       updaternotifications.dll   Adobe Updater Notifications Library   7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   7.0.1.102
       WRServices.dll   WRServices Mon Feb 25 2013 16:09:10   Build 0.19078   0.19078
    Required plug-ins:
       3D Studio 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Accented Edges 14.0
       Adaptive Wide Angle 14.0
       Angled Strokes 14.0
       Average 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Bas Relief 14.0
       BMP 14.0
       Camera Raw 8.0
       Camera Raw Filter 8.0
       Chalk & Charcoal 14.0
       Charcoal 14.0
       Chrome 14.0
       Cineon 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Clouds 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Collada 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Color Halftone 14.0
       Colored Pencil 14.0
       CompuServe GIF 14.0
       Conté Crayon 14.0
       Craquelure 14.0
       Crop and Straighten Photos 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Crop and Straighten Photos Filter 14.0
       Crosshatch 14.0
       Crystallize 14.0
       Cutout 14.0
       Dark Strokes 14.0
       De-Interlace 14.0
       Dicom 14.0
       Difference Clouds 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Diffuse Glow 14.0
       Displace 14.0
       Dry Brush 14.0
       Eazel Acquire 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Embed Watermark 4.0
       Entropy 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Extrude 14.0
       FastCore Routines 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Fibers 14.0
       Film Grain 14.0
       Filter Gallery 14.0
       Flash 3D 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Fresco 14.0
       Glass 14.0
       Glowing Edges 14.0
       Google Earth 4 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Grain 14.0
       Graphic Pen 14.0
       Halftone Pattern 14.0
       HDRMergeUI 14.0
       IFF Format 14.0
       Ink Outlines 14.0
       JPEG 2000 14.0
       Kurtosis 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Lens Blur 14.0
       Lens Correction 14.0
       Lens Flare 14.0
       Liquify 14.0
       Matlab Operation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Maximum 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Mean 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Measurement Core 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Median 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Mezzotint 14.0
       Minimum 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       MMXCore Routines 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Mosaic Tiles 14.0
       Multiprocessor Support 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Neon Glow 14.0
       Note Paper 14.0
       NTSC Colors 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Ocean Ripple 14.0
       Oil Paint 14.0
       OpenEXR 14.0
       Paint Daubs 14.0
       Palette Knife 14.0
       Patchwork 14.0
       Paths to Illustrator 14.0
       PCX 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Photocopy 14.0
       Photoshop 3D Engine 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Picture Package Filter 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Pinch 14.0
       Pixar 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Plaster 14.0
       Plastic Wrap 14.0
       PNG 14.0
       Pointillize 14.0
       Polar Coordinates 14.0
       Portable Bit Map 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Poster Edges 14.0
       Radial Blur 14.0
       Radiance 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Range 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Read Watermark 4.0
       Reticulation 14.0
       Ripple 14.0
       Rough Pastels 14.0
       Save for Web 14.0
       ScriptingSupport 14.0
       Shake Reduction 14.0
       Shear 14.0
       Skewness 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Smart Blur 14.0
       Smudge Stick 14.0
       Solarize 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Spatter 14.0
       Spherize 14.0
       Sponge 14.0
       Sprayed Strokes 14.0
       Stained Glass 14.0
       Stamp 14.0
       Standard Deviation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       STL 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Sumi-e 14.0
       Summation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Targa 14.0
       Texturizer 14.0
       Tiles 14.0
       Torn Edges 14.0
       Twirl 14.0
       Underpainting 14.0
       Vanishing Point 14.0
       Variance 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Variations 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Water Paper 14.0
       Watercolor 14.0
       Wave 14.0
       Wavefront|OBJ 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       WIA Support 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Wind 14.0
       Wireless Bitmap 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       ZigZag 14.0
    Optional and third party plug-ins:
       Perfect Batch 8 8.1.0
       Perfect BW 8 8.1.0
       Perfect BW 8 Filter 8.1.0
       Perfect BW 8 Smart Filter 8.1.0
       Perfect Effects 4 4.0.4
       Perfect Effects 4 Filter 4.0.4
       Perfect Effects 4 Smart Filter 4.0.4
       Perfect Effects 8 8.1.0
       Perfect Effects 8 Filter 8.1.0
       Perfect Effects 8 Smart Filter 8.1.0
       Perfect Enhance 8 8.1.0
       Perfect Enhance 8 Filter 8.1.0
       Perfect Enhance 8 Smart Filter 8.1.0
       Perfect Mask 8 8.1.0
       Perfect Mask 8 Filter 8.1.0
       Perfect Mask 8 Smart Filter 8.1.0
       Perfect Portrait 8 8.1.0
       Perfect Portrait 8 Filter 8.1.0
       Perfect Portrait 8 Smart Filter 8.1.0
       Perfect Resize 8 8.1.0
       Perfect Resize 8 Engine Automation 8.1.0
       Perfect Resize 8 Engine Filter 8.1.0
       Perfect Resize 8 Filter 8.1.0
       Topaz Adjust 5 10.0
    Plug-ins that failed to load: NONE
    Flash:
       Kuler
       Adobe Exchange
    Installed TWAIN devices: NONE

  • K8N SLI-F: RAID won't boot windows?

    I just installed this motherboard yesterday and it seems to recognize the RAID no problem, and Windows MCE installs just fine.  but after the install is complete and it restarts the computer, the systems fails to boot and gives me a safe mode option or Start Windows Normally, etc...  I try both and it just automaticly resets the computer both times.  I've tried reinstalling 3 times now and I get the same result everytime.
    I have a 200GB Western Digital backup hard drive and it installs windows and boots just fine.  weird? (I have to disable the IDE drive when istalling the raid, or it tries to make the IDE boot a dual boot instead of keeping the RAID as Master Boot, and yes I switch the master boot in the BIOS and it keeps installing window on the IDE unless I disable it, but it still doesn't start Windows in dual boot mode either)
    -=Mark=-
    P.S. I just noticed while gettng here that there is a V1.6 bios for generic K8N SLI Series Motherboards, but under K8N SLI-F motherboards there is only a V1.3.  can I use the generic K8N SLI Series BIOS or is that for a different MB?

    was searching the forums some more and seen someone had a similar problem and he did like I did and only removed the power cord from my IDE drive and left the PATA cable connected.  well I removed the cable and reinstalled windows again and all is fine now.
    Thanks for you time.
    -=Mark=-

Maybe you are looking for

  • My nano is stuck in "safe mode" still and will not update.

    The original problem:When I was trying to update my nano ipod to 2006-03-23 it ended up going to a black and white screen which said do not disconnect. The updater wouldn't work, it kept saying that the firmware (or whatever the name of the maker is)

  • Service Registry containend in SOA Suite?

    Bonjour! I just downloaded and installed Oracle SOA Suite 10.1.3.1 plus patch set 10.1.3.3. But now I wonder whether the Oracle Service Registry is really contained in the suite (as said in the documentation) and how I can configure it? Is there any

  • Weblogic 12c + ohs 11.1.1.5

    Hello: I would like to know if it is possible to make an installation in AIX 6.1 of Weblogic 12c with Oracle Http Server 11.1.1.5. Is it certified? Thanks.

  • Cannot set property 'readyState' of undefined?

    Cannot set property 'readyState' of undefined este es mi error cuando utilizo Websocket de coldfusion! Alguna solucion?

  • Crop and straighten

    Crop and straighten tool no longer work correctly in PSE 11, windows 7.  Problem surfaced in the last week.  Have done a complete reinstall and problem still exists.  Appers to be an instability error.