Silly install question

Does a full "operating system" get installed when you install the server software? Or is it just "server" software that gets installed? Reason I ask is because the one tutorial I viewed (Lynda.com) wants me to erase my hard drive before install. So I'm assuming a full Leopard 10.6.1 is also installed? Thanks for answering such a simple question.

Does a full "operating system" get installed when you install the server software?
Yes.
(47746)

Similar Messages

Please answer asap install question post

https://support.mozilla.org/en-US/forums/firefoxaurora/708210?last=46112#post-46112
please answer asap install question post

Hi C,
No, you should wait till the end of the Welcome video, when the message says it will restart to finish installation it means installation is still in progress, conclude the procedures.
Happy installing, good luck.

Free download, and install question

Free download, and install question.
I need to buy a larger h/d, but till then I would like to put as many programs as possible on a external usb drive that I have hooked up to my PC. I've been able to do this with some other programs, and would like to try it with my Adobe Reader and Flash. When down loading and installing it does not give me the option to install in a defferent location other then my C: drive. Can this be done? Thanks you?

From the MSI you have to create a MST (Transforms). In the MST create now the new property INSTALLDIR=F:\, where F: is your USB-drive. If you use then the command
msiexec.exe /i [MSI] transforms=[MST]
Adobe Reader should be installed to F:
Regards

HT1420 how do i removel the silly security questions, i purchased music in the past and now it asking for them and i can't remember the answers. I dont like this feature if it remembers and verifys your password

how do i removel the silly security questions, i purchased music in the past and now it asking for them and i can't remember the answers. I dont like this feature if it remembers and verifys your password

Click here for information. If the option to have the answers emailed to you isn't available or doesn't work(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section of that article.
(90135)

Silly console question.

Hello All -
I have several 210's up and running happily.
I need to console into one which has gone down.
Using a Cat5E patch cord, and the supplied db-9 to rj45 adapter that came with the server, the silver adapter...I believe it's part number 530-3600-xx?
Connecting to the rj45 serial management port on the back of the server.
Using Hyperterm, 9600 8N1, no flow control (tried hardware and software).
I get 0 output to the console. Powering the server off and on, same problem.
I've swapped laptops, cables, connectors.
Any thoughts as to what the heck I'm missing?

There is no such thing as silly console question ;o)
Try to use your cable on another server ...
Unfortunately the silvery thingies provided by Sun are sometimes DTE (Term) sometimes DCE(Modem). Don't ask
In some occasions using a straight through Cat5 cable is enough to DTE - DCE thing straighten up (it 'swaps' pins 3 & 6 on the RJ45 by sendin 3 to 3 and 6 to 6 the Orand & Orange/White Pair)(see sunfan's post http://forum.java.sun.com/thread.jspa?threadID=5248128&tstart=0) if it does not work try a CrossOver cable in lieu of Straight through (3 to 6 on RJ45)
If things are still not working, which can be the case if V210 needs more than Ground get a standard CISCO DB9 to RJ45 cable to connect to the Serial RJ45 at the back of the server.
If there is nothing of the above working build your own cable, I did mine cutting a DB25 Null Modem cable right in the middle and splicing the wires back (matching colours) together and then cut one end off a Cat5 and slice with the previous Null Modem as follow (see table). One DB25 end would then be DTE and the other one DCE ... I haven't find a server that does not want to print out something ... unless the connector is oxidised (that happens too).
DTE
DB-9     DB-25 Signal Function Adapter RJ-45
8 5 CTS Clear To Send Blue 1
1 8 DCD Data Carrier Detect Orange 2
2 3 RD Received Data Black 3
5 7 SG Signal Ground Red 4
5 7 SG Signal Ground Green 5
3 2 TD Transmitted Data Yellow 6
4 20 DTR Data Terminal Ready Brown 7
7 4 RTS Request To Send White 8
6 6 DSR Data Set Ready     -     -
9 22 RI Ring Indicator     -     -
The console may have been redirected to TTYB ... but at least you should see the ALOM logging.
All the best
Cheers
B.
Sorry the post does not show the table properly ... just tab it.
Edited by: Fortever on Jan 3, 2008 10:42 AM

Workflow install question

Hello.
I am new to Oracle Workflow so please accept my appologies if my question sound silly :)
I am trying to install Oracle http and oracle workflow. the installer keeps giving me this error message:
OUI10066 - Not all dependencies for the component Oracle JDBC/OCI Driver for JDK 1.2.10.1.0.2.6 could be found. Missing component: Missing component oracle.java.jdbc.thin12 10.1.0.1.0
I have chked my DB installetion and in the list of installed products it says that all of the required components for JDK 1.2.10.1.0.2.6 are installed.
I have search metalink - couldn't find anything there that might be helpful.
If you had this problem before or may be know what might be causing it - please share our knowledge.
Thank you very much for your help and support
Vix

Hi
No worries :)
Ok so you have Oracle up and running - always a good start :)
The next thing i did was to install Oracle HTTP server. I used the database installer - go to your start menu -->program files -->oracle -->oracle installetion products and from there select oracle universal installer. You can use the one that comes with the CD but for me it didn't work. So i used the one from the database.
Once you launched Oracle Universal installer from your database it should automatically pick up Oracle companion CD (i saved mine on my drive so it was picked up from there). If not - just browse to whenever your oracle CD is.
Once you start - have a read through the three options it gives you (you have to choose what you want to nstall). You need to option that gives Oracle HTTP and Workflow Middle Tier. Just expand that option and select ORacle http. then follow the instructions.
Once you installed Oracle http - launch the installer again and choose the option that gives you the actuall oracle workflow. phew!
This is how i did it
Hope it make sense this time :)
Vix

Silly Newbie questions...

OK....I'm sorta new to all this, so here's some silly questions for you. Also, I'm at work right now, so don't have much in the way of specs at hand right now. I can post that kind of stuff tonight some time if needed.
1...I installed matched memory, but is there any way within windows that I can verify that the ARE workign as dual channal? (I've heard that SiSoft Sandra will check for this?)
2...I've installed 2 10k rpm raptors SATA drives (36.7 gb) in a raid on the promise controller....but I'm just not seeing the performance that I've expected, or been told that I can expect by others running single SATA drives. For instance, a friends system with 1 7200rpm SATA boots windows from power down in about 15 seconds, I take more like 35-40, which is no improvement at all over my old 7200 rpm P-ATA.
2.5....will running 2 P-ATA drives on IDE 1 and 2 reduce the performance of my raided SATA drives that are installed thru the Promise driver?
3...What temp should I be aiming for on a P4 3.0? Currently I'm running around 50c at low loads (IE, sitting in windows, doing driver installs)
Thanks for the time!

1. Get CPU-Z to show the dual-channel staus as well as many other useful things.
2. 15 seconds?!? That is very quick! It would help to know what motherboard and other equipment you have but sounds like some kind of FIS2R. The speed of the raptors won't really help you at boot time. Windows has to load raid drivers and get itself going before it even realises,"hey! those are raptors! I better get moving!" Seriously though, you won't get 15 seconds but you might speed things up a little by changing some bios settings.
Enable quick-boot
Disable full-screen logo
Set your boot drive 1st in the boot sequence. if you want to boot off the floppy/CD, there should be an F key to get a boot menu when you start computer. F11 for me.
Disable floppy seek
Disable anything you're not using(com1+2, Promise controller, Firewire...whatever)
Set others from Auto to enabled or specific setting if it applies.
Some programs can defragment your boot files. Bootvis from mrsft does this but I haven't used it in a while.
To test the performance of those raptors, get a program like Aida32. you can see the kind of bench it uses in This Thread.
2.5 Any one device you have has the potential to affect the performance of any other device connected to your computer. The scenario you describe is more unlikely than if they were on the same controller though. All you can do is monitor/test performance and if it falls into the normal/better category, don't worry about it.

Upgrading to Mountain Lion Pre Install Questions

HI:
I will be installing Mountain Lion Next week.
I have read through many of the turotrials and quired most of the following I still have a few questions.
I have some concerns in particular regarding the contents of my mail boxes and mail.
I have backed up unto an external harddrive using time machine. When I click on the mail app I can't access it and see if the contents are there. I just get a window showing the specs.
From what I have read all my documents applications and system info are backed up.
1} Will the contents of Mail Inbox and personal Mail Boxes be either on the external drive or in Mail itself after I upgrade?
2} Will I need to up grade iWork and other Mac programs after the upgrade?
3} Does time machines automatic backup, back up everything or do I need to do a manual back up for some thing?
4} Will I need to load new drivers for external devices such as my printer and mouse?
5} Will I need to reload third party soft ware such as Adobe Elements 9?
6} Will my bookmarks and homepage be saved in Safari?
Lot's of Questions, I have limited broad band width and will need to do most of this from a friends and internet cafes so I need to be prepared time wise and finanancialy as some things will have to be done at home and are going to push me into the next teir of my flex plan, possibly past the final teir.
Any and all advice will be appreciated.
Pantheria

1. You have a backup of your mailboxes in Time Machine that you can restore, but Mail won't modify your mailboxes during the upgrade. The first time you open Mail after the upgrade, it will upgrade your mailboxes to be able to work with that new version.
2. If you upgrade from Snow Leopard, you should know that there's a newer iWork '09 version for Lion and Mountain Lion that make it compatible with iCloud, so you will have to install updates for iWork at least. Respecting to other apps, you have to consult it with the developer.
3. Time Machine makes a backup of everything in your OS X partition, and it makes automatic, hourly backups. If you want, you can also make a clone with Carbon Copy Cloner or Disk Utility's Restore feature in another external disk. The advantage is that you can start the Mac from it.
4. Theoretically, Snow Leopard, Lion and Mountain Lion use the same printer drivers. Respecting to the mouse, if you are using a third-party mouse, you have to consult with the developer if your mouse is compatible with OS X Mountain Lion.
5. Third-party apps won't be deleted unless they aren't compatible. See > http://www.roaringapps.com
After downloading OS X Mountain Lion, I recommend you to make a bootable copy with Lion Diskmaker, so you won't have to download OS X Mountain Lion each time you have to reinstall OS X Mountain Lion

Bootcamp and Windows XP/7 Install Questions

I got an iMac a few months back and want to set up BootCamp for a Windows install.
I have a Windows XP Full install disk w/the product key.
I also have a Windows 7 Upgrade disk.
From what I have read, the newest version of Bootcamp will not install XP, which I could then upgrade to W7 (I assume this is correct).
Can I then install from the Windows 7 Upgrade disk and at some point indicate the XP Product Code?
Secondary question - assuming I get Windows installed and running properly, if I boot to the Mac OS, can it see/access the Windows partition?
Thanks,
Steve

If the Windows 7 Upgrade is a full install. What you would do is install, then reinstall over itself. And only then will it activate.
There are upgrades that are to go from Home Premium to Pro and that isn't a full install.
Windows 8 CP is free and works.
Windows 7 System Builder are $99 for Home Premium 64-bit

Hard drive install question

I want to install a second hard drive in my HP dv7-6c95dx. the main drive that is in it now is a,
750GB 5400RPM hard drive with HP ProtectSmart Hard Drive Protection
I want to put in a second drive (the one above) for a total of 1.5TB of hard drive storage. ok now my question,
is the "HP ProtectSmart Hard Drive Protection" a gimmick or does it really work? should i just get a drive of the same brand and forget about the "HP ProtectSmart Hard Drive Protection"? I want to get the exact matching drive but HP wants $256 for it (ouch!),
and that does not include the cable. is it worth the extra $130 or so for the matching "HP ProtectSmart Hard Drive Protection"?
Or should i just get a matching brand hard drive and forget about the "HP ProtectSmart Hard Drive Protection"?

Hi,
Sorry, I should have been clearer on this, I meant that you should physically check the drive currently installed in your notebook.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Acrobat Media Disk install question

My question is if there is any fundamental difference between the optical media contained in boxed products of Acrobat and the media kits that come with volume licensing agreements.
IE: Can you install a license using a volume license key with boxed product media.
If not why not? With product activation this would not make sense to me.

Historically the volume license versions have sometimes differered
from the retail versions, not only in packaging, but technically. For
example, with Terminal Server systems, you needed the Volume License
version of Acrobat Professional 7.0, as the retail version did not
work.
Aandi Inston

InDesign CS3 - Vanilla Install - Question Marks All Over My Content

Yes, I'm still using InDesign CS3 on my MacBook Pro from 5 years ago. CS3 has worked like a charm and I've never had a problem with any files until this morning.
I've got a 120 page book, each page with images and text boxes, none of which are threaded. I opened my file this morning and all my content boxes: images and text have question marks on the top left corner.
I have no plug-ins. The installation is straight out of the box with the occasional updates, which stopped quite awhile ago.
The error that pops up when I place the cursor in a text box is: "31-40-TasksAssemble-Instal.incx" cannot be located. Another error is: "31-40 TasksDirectly supe-1.incx cannot be located. I have no idea what these mean and when I did a Google search there were only 3 returns and they were from what appeared to be software pirate sites. I can't find a reference to this on the Adobe forums either.
I've saved under a different name, different file type and replaced the preferences, all to no avail. I think the application is behaving as though I've "checked out" the content, but I don't share my files with anyone and the file itself isn't on a network - there is nowhere to check out to, and the commands to check in is grayed out so I can't reverse the behavior.
I'm stumped and I have a deadline! Can anyone help??
thank you!
Message was edited by: dnetmike

No one has worked on or had access to this file but me. I'm on a network but I'm a Mac in a PC world and no one would even know how to find my hd, let alone do anything on it.
I have to believe it is related to my moving my entire project folder to an external hd (not just the file as I mentioned before) as a means of backup. I don't know why it would matter or what it could have done unless there are files created in the Library that are somehow related/linked to the stories.
I'm still searching the Adobe Forums for something related but all ID/IC related discussions relate to people actually using IC!
I've unlinked all of my content from IC and now I'll have to see what happens.
[POSTSCRIPT]
I've been editing my layout most of the day and so far so good.
The oddity of each box asking for a link to InCopy, which has never been used, happened only after I dragged my project folder to an external hard drive as a precautionary backup. All InDesign files in both original and backup folder suffered this problem. I didn't dare open any other ID files for fear of corrupting them so I can't say how widespread this problem would have been.
I do not know why making a copy of a folder would have created this problem and I can't find any discussion thread that talks about it, much less sheds any light on the subject.
After unlinking all of the boxes from their non-existent "host file" the boxes remained intact complete with images and formatting. I saved often!

Door speaker install question(s)

I purchased Polk DXI 6500 component door speakers and I am going to have them installed in a 2010 Camaro, that did not come with the Boston Acoustic stereo. I had an amp installed in the trunk over a year ago at best buy it's an alpine 710 watt five channell and it is only running my 10 inch alpine sub right now and want it to run the polk's once there installed. My question is what else do I need to buy before I go to the best buy installers?. a year ago I was going to have them install the speakers and there were multiple mix ups on there part. So I want to make sure I have everything when I take it in. have already ordered brackets specifically for the camaro so the actual doors speaker installs should be much easier for the techs, but I know that I need to buy LOC for the back of the radio (I think)and some more wire, but I would just like someone to point me in the right direction on the Best buy web site so I could purchase all the items ahead of time so I don't run in to the crap I did last year when I brought my car in!

if you are wanting to run the rest of your speakers off of the factory radio than all you will need is another line out convertor. Are you replacing all 4 or just the front? since you already have the amp installed you might not need another line out since it is a 5 channel amplifier. If you are going to run all 4 speakers off of the factory radio than what i would have you purchase is a isve61 it is a 53.99 dollar part that all installation bays should have. That part will act as 2 line out convertors and make for a cleaner install instead of running 2 line outs.
If you are only going to be runnin the front two than all you would need is 1 line out convertor that is 14.99 fierce audio. again it all just depends on how they decided to do the initial amp installation.
If you came to my shop and wanted all 4 done i would add on speed wire that is 30 dollars, that is so that i can make all my connections from the back of the stereo and have all the wires cleanly ran in one big loom, instead of multiple wire runs, but i would debate doing this for jsut 2 speakers. I would personally just call the techs that are working there and see what they want to do since they did the original installation.
Good luck!
I am a CAR Geek Squad installer tech lead, but my views that i post are my own and not that of best buy. if you like my posts give me some kudos, if you need further help contact your local Geek Squad installation bay!
Please read my posts with a smile, cause thats how I write them.Although i have a cool avatar by my name, I am just a member of the community that works for Best Buy.
***KNOW THAT I CANNOT ISSUE OFFICIAL RESPONSES AND THAT MY POSTS ARE ONLY HERE TO HELP BEFORE A OFFICAL RESPONSE IS MADE BY A MODERATOR.***

Oracle 10g Install Question

Hi All,
I have to install oracle 10g onto a server where there is existing oracle 9i software.
Is it safe to go ahead with the install, while the 9i databases are up?? what are the consequences of doing this?
OS patches and kernel parameters as required for oracle 10g have already been changed.
10g is being installed into a different oracle home and i would choose not to overwrite any of the files as asked by root.sh script.
OS is hp-ux 11i (11.11).
Thanks & Regards
Chandar
Edited by: chandark on Dec 9, 2008 9:50 PM

Hi,
Thanks for your reply.
Sorry for not being clear in my question earlier.
I am planning to install Oracle 10g on a server with existing 9i software. My question is whether we should shutdown all 9i databases for the duration of the install or we can leave them running as long as we do not overwrite any 9i files including files in /usr/local/bin directory that contains oranev etc...
To be on the safer side it is always recomended to shutdown any oracle instances running before we start the install. Wanted to know the consequences if we have them up and running for the duration of the install.
Thanks & Regards
Chandar

Lion install questions

Hi, I Have A Couple of questions about installing lion, first can you run snow leopard apps? and second, i have root enabled in snow leopard, onced installed will i have to reenable it? thanks!

SilverArrow23 wrote:
first can you run snow leopard apps?
If by "snow leopard apps" you mean ppc apps, no you can not run those in Lion. check here for a compatibility list. Not sure about the other question.

Silly install question

Similar Messages

Maybe you are looking for