Silly question - but how do I add arrows to my presentation?

Hi all - just wanted to know if you can add arrows to presentation in FCE? I tried to add objects using LiveType but was unable to find anything there.
I just need to add some arrows to motion video to point out certain things.
Thank you!

Hi(Bonjour)!
There're a lot of free quality plugins available on the web.
See Stib's FXscript web site:
http://www.fxscript.org/plugins.html
There is a good arrows generator included in the package that's works well with FCE HD. Be sure to select the "pre-FCP 5" one.
See the demo reel:
http://www.fxscript.org/demos/arrows.html
Michel BOissonneault

Similar Messages

  • This may be a silly question but how do I get my music from my old ipod to the Ipod touch. when I go to move my music a error pops up saying your music wasn't copied to this ipod because it can not be played on this ipod.  what can I do??

    This may be a silly question but how do I get my music from my old ipod to the Ipod touch. when I go to move my music a error pops up saying your music wasn't copied to this ipod because it can not be played on this ipod.  what can I do??

    You will need to do it using a third-party utility such as Phone to PC. Also, see:
    How to dowload purchased music
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • This is a silly question but how do you close the angle editor in the timeline and go back to my master multicam clip for editing? I'm having a brain **** right now...

    This is a silly question but how do you close the angle editor in the timeline and go back to my master multicam clip for editing? I'm having a brain **** right now...

    Never mind...found the cure  Command-{  ...thanks to a  TWolfsky thread...

  • I am trying to create mobile pages using the steps file new new document page from sample mobile starters jquery mobile (cdn).  When "page from sample" is selected, the subsequent options are not available.  This seems like a silly question, but how do I

    I am trying to create mobile pages using the steps file>new>new document>page from sample>mobile starters>jquery mobile (cdn).  When "page from sample" is selected, the subsequent options are not available.  This seems like a silly question, but how do I acquire these options?

    You can get the latest jQuery Mobile Themes directly from jQuery Mobile's web site.
    https://demos.jquerymobile.com/1.1.0/docs/api/themes.html
    Or roll your own with ThemeRoller
    http://themeroller.jquerymobile.com/
    Nancy O.

  • This may seem a silly question, but how can I create a new mailbox on my iPad?

    This may seem a silly question, but how can I create a new mailbox on my iPad?

    A new mailbox/folder - you can't, not yet. If you're using an IMAP mail account, you can create a mailbox on the server (either through webmail or desktop mail) and it'll appear on the iPad.
    We've been told the upcoming iOS5 will allow you to do so (I assume, provided you have IMAP).
    Matt

  • I want to send a normal pages document as a attachment to someone (non Mac PC). How do I convert the file so they can open it? Silly question but I'm new to Mac.

    I want to send a normal pages document as a attachment to someone (non Mac PC). How do I convert the file so they can open it? Silly question but I'm new to Mac.

    A Pages (.pages) document is only viewable with Apple's Pages application on the Mac, or via Pages for iCloud beta. You should export it to either MS Word (.doc/x) or PDF. The Share menu will let you do this directly into a Mail attachment.

  • This is a silly question, but I cannot fix it! The icons that appear on my photos after I edit them, have gone away. The only way I can see them is in the Grid view. How can I get the icons back on the thumbnail photos of the full gallery that is loaded?

    This is a silly question, but I cannot fix it! The icons that appear on my photos after I edit them, have gone away. The only way I can see them is in the Grid view.
    How can I get the icons back on the thumbnail photos of the full gallery that is loaded? TIA =)

    You have likely dragged the size of the filmstrip thumbnails to a small size that prevents Lightroom from displaying the badges. Using your mouse, mouse over the top line of the filmstrip and then drag it supports to increase the size.

  • This may seem like a silly question but I need it answered plz

    This may seem like a silly question but I am pretty new to
    dreamweaver but I am learning it. The question I have is this. When
    your typing a paragraph and hit enter to make the next line of text
    it goes down 2 spaces. Sometimes I don't want those two spaces. I
    want no space between the two sentences. How do you put one
    sentence below another with no spaces? Thanks in advance. I seems
    to have figured out all the other basic stuff except for this one
    thing lol. Thanks for the help in advance.

    >>>This may seem like a silly question
    There are no silly questions, only stupid answers.
    Alan sorted you, don't be afraid of asking questions.
    Kind Regards
    Paul Dell
    Photography and Web
    www.dellimages.com
    Blog
    www.paul-dell.com
    "ancientone567" <[email protected]> wrote in
    message
    news:fq4is3$mln$[email protected]..
    > This may seem like a silly question but I am pretty new
    to dreamweaver but
    > I am
    > learning it. The question I have is this. When your
    typing a paragraph and
    > hit
    > enter to make the next line of text it goes down 2
    spaces. Sometimes I
    > don't
    > want those two spaces. I want no space between the two
    sentences. How do
    > you
    > put one sentence below another with no spaces? Thanks in
    advance. I seems
    > to
    > have figured out all the other basic stuff except for
    this one thing lol.
    > Thanks for the help in advance.
    >

  • Dumb question but How do you know what generation iPad you have?

    Dumb question but how do you know what generation iPad you have?  I got mine as a gift on Xmas day 2012 but don't know how to find out what version/generation it is.  Can someone help me find that info?  I have looked within settings &amp; elsewhere and I cannot find it.  Thanks in advance!

    Append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
    (83797)

  • HT204053 Stupid question, but how do I get to/access my iCloud?!

    Stupid question, but how do I get to/access my iCloud? All this time, I've been under the impression that every time I plug in &amp; lock my screen, things on my phone are backed up in my cloud, but I've never been able to find it to check! And, yes, I'm blonde! Please help me!

    You can't see the backup, all you can do is confirm that it was successfully completed.  To do this, go to Settings>iCloud>Storage & Backup and look at the very bottom under Back Up Now.  It will show the time/date of your most recent backup.  If you see this, you do have a backup in iCloud and can restore it to your device in the future if you ever need to.  (You also can't see any of the files in a backup, you can only restore it to your device.)

  • HT4522 Sounds fine but how do I add partitions in air port utility

    Sounds fine but how do I add partitions in air port utility

    It is possible to partition the drive, but you have to physically pull the hard drive from the Time Capsule and place it in a separate enclosure for the formatting operation, then reinstall the drive again back in the Time Capsule.
    Unfortunately, in addition to a lot of work, this will void the warranty on the Time Capsule.
    It is possible to create one or more disk images on the Time Capsule using Disk Utility.
    While a disk image is not technically a "partition" in the normal sense, it will allow you to specify and reserve a given amount of space on the drive for the image or images that you create.

  • Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

    Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

    Hi Winterwilly,
    Welcome to Apple Support Communities. 
    The article linked below answers your question of how to use QuickTime to record something on your MacBook Pro’s screen.
    QuickTime Player 10.x: Record your computer’s screen
    Cheers,
    -Jason

  • I got birthdays in my ical on mac and iPhone 4 but how can i add anniversaries

    I got a mac pro and have updated to mountain lion, i use the mac cal to synchronize to mac cal on iphone 4s and vise versa, I got birthdays on my cal but would like to add anniversaries to it as well how do i add them so i dont forget important dates and also in my icloud i have 3 colours for different entries e.g. green for holiday , blue for home and green for work, so how do i add another colour for something else for a different entries called "events" and add anniversaries like birthdays. Ta Juss p.s i also have a problem with birthdays they all duplicated.....

    Go to "File" and create a new calendar, name it "Events" or whatever you like and pick a color.  Then, go to the date you want the anniversary on and create an all-day event naming it however you like.  Under repeat, choose to have it repeat every year and select never for when it should end.  You will now have a calendar of anniversaries and other events.  Just make sure to select repeat every year and never end on each item you want in that calendar.

  • As a new user I received an answer to my question but how do I stop the barrage of incoming mail - local advisor suggested Junk mail, but is this the answer?

    As a new user I received an answer to my questions, but now my mailbox is flooding with the Support Communitees Aperture updates.
    How can I stop this? My local advisor suggested Junk mail, but is this the answer?
    Thanks

    In addition to Corky's suggestion on the right hand side of your profile page is this box:
    Click  Manage email notifications.  This manages any current email notifications you are receiving.

  • Might be a silly question but...

    As the folks Demotivators said, "There are no stupid questions, but there are a lot of inquisitive idiots." So here goes.
    Why should I be using Filevault. I had it turned on for awhile after I bought the Mini, but after noticing the huge amount of harddrive space it used up, I turned it off. Now however, with my FTP running, is it something I should consider turning back on?
    I've read up on Apple's site on what it does, how it would take 149 trillion years and whatnot to crack it it, encrypts and decrypts on the fly, etc. But what's all that mean for me. Can anyone put it into laymens terms on what exactly it's function is and who it prevents from doing what? If I have it turned on and I've got the login screen on, will it take them 149 million years to break go around it or something?
    Thanks,
    Stephen
    Mac Mini   Mac OS X (10.4.5)  

    Stephen,
    An Unencrypted Look at FileVault, by François Joseph de Kermadec is an excellent discussion of the features, pitfalls, and cautions regarding Filevault.
    Although the article discusses Panther and is dated 12/19/2003, the concepts as they apply Tiger have not changed.
    The cautions and warnings are prominent in any of the Apple Knowledge Base articles referring to the use of FileVault. If a user is unfamiliar with any aspect of FileVault, it should not in my opinion be activated.
    As good as FileVault is in protecting your sensitive data, it also presents the danger of locking up your files in an irretrievable ball of one's and zero's. Backups are critical. You must ensure that you have a comprehensive backup plan. Backup and Recovery, by Dr. Smoke is a fine example of what you need to consider.
    ;~)

Maybe you are looking for

  • SSRS Dataset Filter Operator

    Hi -- I have a Dataset which returns data based on a multi select parameter. It uses a filter to achieve this and works as expected (based on the IN Operator). Now I have to update the report so it also returns records for this parameter value which

  • Upgrading to CS3 from DW trial version

    I downloaded the DW trial and when it was over, uninstalled it and installed a full version of CS3 Web Premium that I had purchased. When I try to open a CS3 app, I get the message that the licensing has stopped working. I have followed instructions

  • Hashing API's

    Guys , Any one have any idea how i can produce a hash of a String using OIM APi's or anything else . Thanks Suren

  • Masterdata infobject data changes report

    Hi all, i have a query regarding Infobject Data changes to be tracked through Technical content cubes. we have many TC cubes in BI were we can track Infobjects last changes and so on . Now req is that when anyone changes the Infobject Data it should

  • How to handle goup sub total for each group in oracle query ?

    hi, i want to handle one complex thing in oracle query. i have a grouping in my oracle query. i want to do sub total for each group in query and after that i want to subtract one group sub total from previous group subtotal ? so how can i handle this