Silly question...regarding.. STL iteartor_traits..

Hi,
I am new to Sun CC (WorkShop 6 update 2 C++ 5.3 2001/05/15). I get this
error when compiling...
Error: iterator_traits is not defined.
Code line causing problem:
typedef typename iterator_traits<Ptr>::value_type l_attr;
Compiles fine with "gcc".

Same here: a test case, the options you used, and O/S version so we could reproduce the problem.
- Rose

Similar Messages

Silly question regarding sol 8 containers and disk sizes

I've got what is probably just about the silliest question, but I can't seem to find an answer whilst searching around for the past couple of hours. Say I have 2 boxen, one is a sol 8 server and the other is a brand new install of sol 10/8. They have the exact same hardware, including disk size. If I want to turn the first box into a solaris 8 container running under the second, how do I reconcile the fact that the disk sizes are the same? The sol 8 box is only using, say, 25-30GB of the 72GB on the disk. Do I have to resize the slice into something smaller to enable it fit into a container on the second server? It would seem that is the case, but I didn't know if there was some magic I was not aware of. I've not done a ufsdump or flash archive before so I don't know if the 'empty' space on the disc will be disregarded, possibly allowing me to squeeze it onto my sol 10 server and allow me to resize it smaller in zfs. This topic isn't touched in all the tutorials I've read, so I assume it's either a completely retarded/braindead concern, or everyone always migrates these boxen onto servers with much more in the way of resources.
Sorry if I offended anyone with my ignorance ; P

No. Solaris8/9 containers make use the "branded zones" technology. But it's still the same thing and there's no "disk image", at least not like you might think of for VMware or Xen.
Now if you want to call a ufsdump or flash archive an "image", then that's fine. But you can see in either case, the free space or minor changes is size are irrelevant. You're just copying files. It's a system image, not a "disk image".
                  Installer Options :
                        Option          Description
                        -a filepath     Location of archive from which to copy system image.
                                        Full flash archive and cpio, gzip compressed cpio,
                                        bzip compressed cpio, and level 0 ufsdump are
                                        supported. Refer to the gzip man page available in the
                                        SUNWsfman package.--
Darren

Silly Question regarding extended desktop

I have just ordered a new 24" iMac however, the tech specs for the UK note:
+Support for external display in video mirroring mode+
Where as the US tech specs note:
+Support for extended desktop and video mirroring modes+
Which is correct? Does anyone from the UK have their aluminum iMac running in extended desktop mode?
I am upgrading from a white 20" and I have a second monitor as an extended display. I just want to make sure I do not lose this functionality.

All Intel iMac's will do extended desktop mode (by default) when you connect a second display. The next bullet says
"Simultaneously supports full native resolution on the built-in display, and up to a 30-inch display (2560 by 1600 pixels) on an external display"
so that basically says it will extend the desktop, since it would not support "full native resolution" up to 2560x1600, if it was simply mirroring the built-in 1920x1200 display.
The new iMacs have a Mini DisplayPort (instead of a mini-DVI port), so you will need a new adapter.

Silly question regarding exporting files

If you export as png 8, 24, 32, whatever, does the original
FW file remain the same? In other words, when you export as gif or
jpeg you literally create a new file. When exporting as png you
don't? How then to differentiate between, say, a png 32 and the
original FW file?

Paevo Kelley wrote:
> If you export as png 8, 24, 32, whatever, does the
original FW file remain the
> same? In other words, when you export as gif or jpeg you
literally create a new
> file. When exporting as png you don't? How then to
differentiate between, say,
> a png 32 and the original FW file?
>
As long as you do not use the same file name in your export,
your
original FW png file will not be harmed.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
See my work on Flickr
http://www.flickr.com/photos/jim_babbage/

Silly Question Regarding : Media browser

Hello,
I am sure it something simple, but I am stuck and I have done 3 hrs of searching, restarts and Preference kills.
• Share previews with iLife and iWork is checked in Aperture
• Aperture icon doesn't show up in the media browser
Any ideas?
Thanks in advance,
-J

Note, if you want to "trick" things like this, use a symbolic link, not an alias. Symbolic links ('man ln' from the command line) work for pretty much EVERYTHING like this... the OS really can't tell the difference except in a few cases.
Symbolic links are created ln -s /Volumes/ExternalDrive ./Directoryname
Or thereabouts... reading the man page is a good idea

Sorry another silly question regarding the VCAP 5.5 related to the vMA

If I remember correctly the vMA got dropped from the VCAP 5.5 exam however it is still in the actual exam lab available to use (feel free to correct me if I am wrong, my brain is pretty nuked at the moment from study).
My understanding is that if I invest some time in using the vMA it may be beneficial can I confirm the vMA is ready joined to a any domain and available to use in the actual exam/lab environment? If so I will try to master it and do everything via it during the next few days

You will most likely be using the vMA appliance during the exam.

Question regarding Business Rule

Hi,
If I updated the business rule by updating any parameter in the Dev environment, do I need to export this business rule into Prod environment or Can I directly change the code in the production environment.
Please advice me on this.
Regards,
Upendra.

John:
Thanks alot for your quick response. And I have very silly question here. I am not sure how to import the file from dev to production.
I checked in the EAS console,there is Export option is there. After saving that rules in xml format, how to import into prod environment. I know, this is a simple question but as I don't know about this, this being a major question for me.
Thanks,
Upendra.

Silly question I am sure....but do you have to pay for iTunes radio? Thanks

Silly question.....Do you have to pay for Itunes Radio ....for my Mac?

The ad-supported version of iTunes Radio is free. You can get the version without ads by subscribing to iTunes Match which is $24.99 US per year.
Regards.

Question regarding security on this forum please

I am new here (am assuming label 'Newbie' is related to posts etc?) - can anybody help with this please? When I click on my user ID when I'm signed in I can see my email address under 'Public Statistics' - yet I can't see anybody else's. Is it only me that can see it? I ask because I really don't want my email address visible in case spam robots read it - this might be a silly question to an experienced user of this forum but do I need to worry? Thanks! Dave T.
Solved!
Go to Solution.

No probs
Ah, beginner status already - you could have a quick read of http://community.bt.com/t5/Forum-Guidance-Ideas/Ranking-structure/td-p/145 for a bit (12 pages!) of info regarding the ranking structure.
-+-No longer a forum member-+-

This may seem like a silly question but I need it answered plz

This may seem like a silly question but I am pretty new to
dreamweaver but I am learning it. The question I have is this. When
your typing a paragraph and hit enter to make the next line of text
it goes down 2 spaces. Sometimes I don't want those two spaces. I
want no space between the two sentences. How do you put one
sentence below another with no spaces? Thanks in advance. I seems
to have figured out all the other basic stuff except for this one
thing lol. Thanks for the help in advance.

>>>This may seem like a silly question
There are no silly questions, only stupid answers.
Alan sorted you, don't be afraid of asking questions.
Kind Regards
Paul Dell
Photography and Web
www.dellimages.com
Blog
www.paul-dell.com
"ancientone567" <[email protected]> wrote in
message
news:fq4is3$mln$[email protected]..
> This may seem like a silly question but I am pretty new
to dreamweaver but
> I am
> learning it. The question I have is this. When your
typing a paragraph and
> hit
> enter to make the next line of text it goes down 2
spaces. Sometimes I
> don't
> want those two spaces. I want no space between the two
sentences. How do
> you
> put one sentence below another with no spaces? Thanks in
advance. I seems
> to
> have figured out all the other basic stuff except for
this one thing lol.
> Thanks for the help in advance.
>

Question Regarding MIDI and Sample Accuracy

Hi,
I have 2 questions regarding MIDI.
1. MIDI is moved by ticks. In the arrange window however, you can move a region by samples. When doing this, you can move within values of the ticks (which you can see on your position box that pops up) Now, will this MIDI note actually be played back at that specific sample point, or will it round the event to the closest tick? (example, if I have a MIDI note directly on 1.1.1.1, and I move the REGION in the arrange... will that MIDI note now fall on the sample that I have moved the region to, or will it be rounded to the closest tick?)
2. When making a midi template from an audio region, will the MIDI information land exactly on the sample of the transient, or will it be rounded to the closest tick?
I've looked through the manual, and couldn't find any specific answer to these questions.
Thanks!
Message was edited by: Matthew Usnick

Ok, I've done some experimenting, and here are my results.
I believe those numbers ARE samples. I came to this conclusion by counting (for some reason it starts on 11) and cutting a region to be 33 samples long (so, minus 11, is 22 actual samples). I then went to the Audio Bin window, and chose to view region length as samples. And there it said it: 22 samples. So, you can in fact move MIDI regions by samples!
Second, I wanted to see if the MIDI notes in the region itself would be quantized to the nearest tick. I cut a piece of audio, so it had a 1 sample attack (zoomed in asa far as I could in the sample editor, selected the smallest portion, and faded in, and made the start point, the region start position). I saved the region as a new audio file, and loaded it up in the exs sampler.
I then made a MIDI region, with and triggered the sample on beat 1 (quantized, on the money). I then went into the arrange window, made a fixed cycle length, and bounced the audio. I then moved the MIDI region by one sample to the right. I did this 22 times (which is the number of samples in a tick, at 120, apparently). After bouncing all of these (cycle position remained fixed, only the MIDI region was moving) I imported all the audio into the arrange on new tracks, and YES!!! The sample start was cascaded by a sample each time!
SO.
Not only can you move MIDI regions by sample, but the positions are NOT quantized to Logics ticks!
This is very good news, and glad I worked this out!
(if anyone thinks this sounds wrong, please correct me, but I'm pretty sure I proved it, in my test)
Message was edited by: Matthew Usnick

Question regarding homehub and Open reach router -...

Hi all,
I had infinity installed earlier this month and am happy with it so far. I do have a few questions regarding the service and hardware though.
I run both my BT openreach router and BT Home hub from the same power socket. The problem is, if I turn the plug on so both the Homehub and Openreach Router start up at the same time, the home hub will never get an Internet connection from the router. To solve this I have to turn the BT home hub on first and leave it for a minute, then start the router up and it all works fine. I'm just curious if this is the norm or do I have some faulty hardware?
Secondly, I appreciate the estimated speed BT quote isn't always accurate, I was quoted 49mbits down but received 38mbits down - Which I was happy with. Recently though it has dropped to 30. I am worried this might continue to drop over time. and as of present I am 20mbits down on the estimate . For the record 30mbits is actually fine and probably more than I would ever need. If I could boost it some how though I would be interested to hear from you.
Thanks, .

Just a clarification: the two boxes are the HomeHub (router, black) and the modem (white). The HomeHub has its own power switch, the modem doesn't.
There is something wrong if the HomeHub needs to be turned on before the modem. As others have said, in general best to leave the modem on all the time. You should be able to connect them up in any order, or together. (For example, I recently tripped the mains cutout, and when I restored power the modem and HomeHub went on together and everything was ok).
Check if the router can connect/disconnect from the broadband using the web interface. Leaving the modem and HomeHub on all the time, go to http://192.168.1.254/ on a browser on a connected computer, and see whether the Connect/Disconnect button works.

Question regarding IWDTree and context Value Node naming

Hi,
I have a question regarding the IWDTree / IWDTreeNodeType components.
I have a context looking like this:
Context
+ ResponseNode
    + PersonNode (1..1)
      + PersonAddressNode                    (empty node, placeholder)
      | + AdresNode (0..n)
      + PersonChildNode                      (empty node, placeholder)
      | + PersonNode (0..n)
      |   + PersonAddressNode                (empty node, placeholder)
      |     + AddressNode (0..n)
      + PersonParentsNode                    (empty node, placeholder)
        + PersonNode (0..n)
          + PersonAddressNode                (empty node, placeholder)
            + AddressNode (0..n)
The context represents a person, a person's address, and a person's children and parents with their respective addresses.
As a result, on different branches, a PersonNode and AddressNode can appear.
And for some strange reason, all PersonNodes and AddressNodes link to the same ResponseNode.PersonNode.PersonParentsNode.PersonNode and ResponseNode.PersonNode.PersonParentsNode.PersonNode.PersonAddressNode.AddressNode respectively, irregardless of their branch...
Is it illegal to have multiple PersonNode and AddressNode node names, and should they be named uniquely?

Generally, node names need to be unique inside the context, attributes in different nodes can have same names. I wonder if the context structure you described will result in code without compile errors.
The WD Tree can only be used with recursive context nodes or with a hierarchy of non-singleton child nodes.
Can you give an example how your tree should look like at runtime?

Question regarding roaming and data usage

I am currently out of my main country of service, and as such I have a question regarding roaming and data usage.
I am told that the airplane mode is sufficient from keeping the phone off from roaming, but does this apply to any background data usage for applications and such?
If the phone is in airplane mode, are all use of the phone including wifi and application use through the wifi outside of all extra charges from roaming?

Ann154 wrote:
If you are getting charged to use the wifi, then it is possible. Otherwise no
Just to elaborate here, Ann154 is referring to access charges for wifi, which is nothing to do with Verizon, so if you are using it in a plane, hotel, an internet cafe etc that charges for Wifi rather than being free . Verizon does not charge you (or indeed know about!) wifi usage, or any other usage that is not on their cellular network (such as using a foreign SIM for example in global phones) So these charges, if any, will not show up on the verizon bill app. Having it in airplane mode prevents all cellular data traffic so you should be fine

Question regarding MM and FI integration

Hi Experts
I have a question regarding MM and FI integration
Is the transaction Key in OMJJ is same as OBYC transaction key?
If yes, then why canu2019t I see transaction Key BSX in Movement type 101?
Thanks

No, they are not the same. The movement type transaction (OMJJ) links the account key and account modifier to a specific movement types. Transaction code (OBYC) contains the account assignments for all material document postings, whether they are movement type dependent or not. Account key BSX is not movement type dependent. Instead, BSX is dependent on the valuation class of the material, so it won't show in OMJJ.
thanks,

**question regarding 3G and wif**.

I have a question regarding 3G and wifi. I have #G activated as well as wifi, when I go to retrieve mail for example I get a pop up asking me if I want to connect to a wifi network…should I have wifi and 3G activated at the same time, and why am I getting the pop up…
Thanks

You can have them on at the same time, but they will not be used at the same time for data. The order of preference for data is WiFi > 3G > EDGE > GPRS. You're getting the pop up, most likely, because you have Settings > Wi-Fi > Ask to Join Networks set to ON. You can set that to OFF, and the iPhone will still join known (i.e. previously used) WiFi networks automatically.

Silly question...regarding.. STL iteartor_traits..

Similar Messages

Maybe you are looking for