Silly questions are necessary when it comes to CC + CC 2014. Enjoy.

CC and CC 2014 have really been irritating in just the fact that they exist. The individual application discussion boards (Photoshop, Illustrator, etc.) are filled with questions about "Creative Cloud" issues more than they are about the applications themselves. This is concerning.
Anyway, I too have had my share of chat and phone support time with Raj, Saanjh, Kumar, Nishanka, Maadhav, Amal, and the rest of the crew and I don't want anymore. Didn't care for it.
I am about to re-install CC 2014 on a newly formatted Mac and I'd like to just be able to install my software and simply get on with life. And work.
So here is my question:
I remember one time all my errors were supposedly caused by -- and yes, I'm serious about this one -- my language selection. I was foolish enough to have chosen the "English (North American)" option. Yes, I'm in Texas but even though I looked there was not an "English (Texan)" option so I went with the next logical choice. Wow, did't see that one coming.
To the point -- SHOULD I CHOSE THE "ENGLISH (INTERNATIONAL)" OPTION THIS TIME?
And more important, if yes, then WHY IS THERE AN "ENGLISH (NORTH AMERICAN)" OPTION TO BEGIN WITH? I can't see any Photoshop needing to be concerned with what I call a cookie, my British colleagues know as a biscuit. Does Illustrator really need a root level preference to determine between a "truck" or a "lorry". Has Dreamweaver become such a finely tuned program that it must know wether I left my things in the car's "trunk" or "boot"?
On a serious note, this is madness. Adobe - stop it already.

I understand that you had faced the language selection issue for CC which did not make you feel good about it.Still here in forums I can offer you to go through the following links :
How can I change the language of my Creative Cloud installation?
Adjust the install language | CCM
Re: Photoshop CC change language installed
Hope this provides some resolution.
Regards
Rajshree

Similar Messages

What jars are necessary when building an Executable for JAXB??

I'm using JWSDP-1.2. I get the following error when I try to run my executable: DefaultValidationEventHandler: [FATAL_ERROR] Document root element is missing. I was curious which jars are necessary when making an executable for JAXB. So far I have: 1)dom.jar, 2) jaxb-api.jar, 3) jaxb-impl.jar, 4)jaxb-libs.jar, 5)jaxb-xjc.jar, 6)jax-qname.jar, 7)namespace.jar, 8)relaxngDatatype.jar, 9)sax.jar, 10)xalan.jar, 11)xercesImpl.jar, 12)xsdlib.jar . Are there any jars I'm missing? I thought I might be getting the error due to a missing class. I've made sure that the XML document is readable and that it exists. The application runs fine in Eclipse, but when I make an executable I get the ERROR message.

I'll have to read up on the doctype stuff, but I don't have anything like that included. Is it necessary? I read from the same XML document when I run inside Eclipse and also read the same document when I run the jar.
Below is the XML document I use and below the XML code is the code I use for my schema:
<?xml version="1.0" encoding="UTF-8"?>
<Information>
<Employee number="1" TabPn="true">
    <FName>Jack</FName>
    <LName>Perry</LName>
    <Status>Part Time</Status>
    <Title>Software Developer</title>
    <DaysEmployed>
      <WorkDay>Monday</WorkDay>
    </DaysEmployed>
</Employee>
<Employee number="2" TabPn="true">
    <FName>Bob</FName>
    <LName>Smith</LName>
    <Status>Full Time</Status>
    <Title>Janitor</title>
    <DaysEmployed>
      <WorkDay>Monday</WorkDay>
      <WorkDay>Tuesday</WorkDay>
      <WorkDay>Wednesday</WorkDay>
      <WorkDay>Thursday</WorkDay>
      <WorkDay>Friday</WorkDay>
    </DaysEmployed>
</Employee>
<Employee number="3" TabPn="true">
    <FName>Fred</FName>
    <LName>Williams</LName>
    <Status>Full Time</Status>
    <Title>Sales</title>
    <DaysEmployed>
      <WorkDay>Thursday</WorkDay>
      <WorkDay>Friday</WorkDay>
    </DaysEmployed>
</Employee>
</Information>------------------------------------------------------------------------------------------------------------------------------------------------
Schema:
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">

<xs:element name="FName" type="xs:string"/>
<xs:element name="LName" type="xs:string"/>
<xs:element name="Status" type="xs:string"/>
<xs:element name="Title" type="xs:string"/>
<xs:element name="WorkDay" type="xs:string"/>

<xs:attribute name="number" type="xs:positiveInteger"/>
<xs:attribute name="TabPn" type="xs:boolean"/>

<xs:element name="DaysEmployed">
<xs:complexType>
    <xs:sequence>
      <xs:element ref="WorkDay" maxOccurs="7"/>
    </xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="Employee" >
<xs:complexType>
    <xs:sequence>
      <xs:element ref="FName"/>
      <xs:element ref="LName"/>
      <xs:element ref="Status"/>
      <xs:element ref="Title"/>
      <xs:element ref="DaysEmployed"/>
    </xs:sequence>
    <xs:attribute ref="TabPn" use="required"/>
    <xs:attribute ref="number" use="required"/>
</xs:complexType>
</xs:element>
<xs:element name="Information">
<xs:complexType>
    <xs:sequence>
      <xs:element ref="Employee" maxOccurs="unbounded"/>
    </xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>

Why does my iPad tell me that the answers to my a security questions are wrong when I know they are correct

I am trying to use my new iPad air to download iBooks with an iTunes gift card and it keeps telling me that my security question answers are incorrect. I do not understand that because they are the answers I provided when asked those questions! Now the darn thing has locked me out of my apple account and every time I attempt to contact support Safari tells me it can't find the server and apparently there is no such thing as 24 hour phone support so what the heck do I do to get my account unlocked and how do I find out what answers apple has for my security questions as apparently they don't have the same ones as I do? I NEED HELP!!

Call Apple in the morning.
Possibility could have been you had caps lock on entering your security answer either now or when you set it up from the beginning.
Apple will help you out and you will be in good shape.
If you are not into phone calls then try to make an appointment at your local Apple store and they can fix it for you in no time.

Which kind of information are necessary when buying AppleCare+ in an Apple Store? Just Apple ID?

A friend pf mine is going to buy an iPhone 5S for me in an Apple Store in Miami. If I want to purchase also AppleCare+ which kind of information do I have to give him? Is Apple ID enough?

wjosten wrote:
Brush up on your reading skills. No where did I mention reqular AppleCare in any post, and the OP never inquired about AppleCare. We're talking about AppleCare Plus.
Whether it's the plus version or regular version, they're both called AppleCare. The only difference between Regular & Plus is the damage protection. You're graspng at straws, wjosten. If I say that I filled up my car with gas, are you going to nitpick about whether it was Regular, Plus or Premium?
Also, where in this document ( http://www.apple.com/legal/sales-support/applecare/applecareplus/docs/applecarep lus_us_tc.pdf ) does it refer to an Apple ID?
You are in error, wjosten. I know you HATE when that happens, but this is one of those RARE cases where you are wrong. Just like the 'passcode lockout' from the other day. As soon as I provided PROOF that you were wrong, you simply ignored the thread. And that's fine. But remember, this isn't personal on any level. It's about providing correct information to those seeking help.

HT1539 security questions are asked when i try to authorize a digital copy on itunes

when putting in a code for a digital copy of a movie i purchased i get the "to help ensure the security of your apple id choose three questions and provide your answers below" thing. why is this happening and how do i input anything? the only planes to type in is the plane for the code itself.

There is no "more like this" button

I am trying to create mobile pages using the steps file new new document page from sample mobile starters jquery mobile (cdn). When "page from sample" is selected, the subsequent options are not available. This seems like a silly question, but how do I

I am trying to create mobile pages using the steps file>new>new document>page from sample>mobile starters>jquery mobile (cdn). When "page from sample" is selected, the subsequent options are not available. This seems like a silly question, but how do I acquire these options?

You can get the latest jQuery Mobile Themes directly from jQuery Mobile's web site.
https://demos.jquerymobile.com/1.1.0/docs/api/themes.html
Or roll your own with ThemeRoller
http://themeroller.jquerymobile.com/
Nancy O.

My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>

Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

I start my macbook air up and a file comes up with a question mark. When I go to Disk Utility I go to update things or erase everything and my disks don't show up or anything. Anyone know what to do?

I start my macbook air up and a file comes up with a question mark. When I go to Disk Utility I go to update things or erase everything and my disks don't show up or anything. Anyone know what to do?

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

There are times when I try to start firefox 3.6 that it does not come up,but when I click it again, I get fire fox is running but not responing, close fire fox, or shut down computer. There are other times that it starts up normaly wit no probs

# Question
there are times when I try to start firefox 3.6 that it does not come up,but when I click it again, I get fire fox is running but not responding, close fire fox, or shut down computer. There are other times that it starts up normally wit no probs
..

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

HT1660 My itunes library has automatically started to list my songs alphabetically. I do not want this. How do I change it so that when albums come up, the songs are listed in the order of the imported album, NOT alphabetically.

My itunes library has automatically started to list my songs alphabetically. I do not want this. How do I change it so that when albums come up, the songs are listed in the order of the imported album, NOT alphabetically.

For the missing Artists on your iPod, make sure their tracks in iTunes are not marked as "Part of a compilation" in iTunes. You can do this by highlighting the track, right->clicking on them and choosing "Get Info" from the shortcut menu. When the window pops up, head over to the Info tab and make sure there is NO tick mark next to this option in the lower right hand corner. Lastly, sync the updated changes to your iPod.
B-rock

I updated my iPhone 3GS on iOS 5.1 everything is ok but when I tap a message in notification area a SMS error comes "This URL wasn't loaded: sms:/open?groupid=1." and when i tap on messages app open and then close certainly... Please anyone helpe me......

I updated my iPhone 3GS on iOS 5.1 everything is ok but when I tap a message in notification area a SMS error comes "This URL wasn't loaded: sms:/open?groupid=1." and when i tap on messages app open and then close certainly... Please anyone helpe me......

Forgot to mention I live in Peru Southamerica, the cell provider is Claro (America Moviles).

I have a DVD I recorded from my tv. I am trying to make copies and when I insert the DVD I get a message saying it is blank even though it is not. My question are: Why does my computer think it's blank? And how can I copy a DVD?

I have a DVD I recorded from my tv. I am trying to make copies and when I insert the DVD, I get a message saying the DVD is blank, which it is not. My questions are: Why does my computer think it's blank? And how can I copy the DVD providing my computer recognizes there is content on it?
Thanks, Sheila

TV video typically is copyrighted content. We'd be breaking several rules trying to help you. Good luck!

This may be a silly question but how do I get my music from my old ipod to the Ipod touch. when I go to move my music a error pops up saying your music wasn't copied to this ipod because it can not be played on this ipod. what can I do??

This may be a silly question but how do I get my music from my old ipod to the Ipod touch. when I go to move my music a error pops up saying your music wasn't copied to this ipod because it can not be played on this ipod. what can I do??

You will need to do it using a third-party utility such as Phone to PC. Also, see:
How to dowload purchased music
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Hello. I have some questions. I use Adobe CC and when it comes to photoshop, it's so slow and often

Hello. I have some questions. I use Adobe CC and when it comes to photoshop, it's so slow and often cannot open files(or create a new one)..what am I supposed to do?! Really don't know what to do..I'll wait for your reply

Amazon allows for at least so far when I have an issue like mentioned above a re-download.
Yes it does. So does the iTunes Store:
Download past purchases from iTunes in the Cloud - Apple Support

My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Silly questions are necessary when it comes to CC + CC 2014. Enjoy.

Similar Messages

Maybe you are looking for