Silver/Black BT vision box

We've had our silver vision box for over 2 years now.  I was just wondering, what's the difference?  I noticed the buttons of the box infront is different to the black one though the remote is still the same just in different colour (I think).  Difference with the performance?  Quality? 
Thanks!

MickyG wrote:
As mentioned on two other threads this morning already.....I had an engineer visit this morning. You'll be pleased to know that this is the last time I'll mention it.
Anyway....I said to him that it will be good when BT finally get the HD Freeview box released.
And he said.....that the old silver box couldn't get HD but, come April, when our transmitter goes digital then I will be able to get HD Freeview on my new black box. Ok, so this goes against my understanding from other threads. But he is an engineer, and he did come in a BT van. So I kind of would expect him to know.....
Please don't shoot the messenger though. I'm only repeating what he said.......
Was that a BT Telecoms engineer or a BT Vision engineer.
If the hardware decoder & firmware is not present in the Black box then it cannot decode HD Freeview.  
"I have this awful feeling someone is watching every move I make (one of my pet hates is router location tagging)." Marvin (A paranoid Android)

Similar Messages

  • New Look Black BT Vision Box - Failure to record a...

    I had my original Silver BT Vision box replaced due to catastrophic failure. I was given the new black BT Vision box as a replacement. Not only does it fail to record programmes as outlined in the posting by StuartH, but it has a habit of re-booting itself.
    When setting up recordings on my original box; of there was a recording conflict, I was able to immediatly resolve the problems by being able to see immediatly which programmes I could choose to record. This is not the case with the new box. When trying to set up recordings for the following week on the new box and a conflict occurs where there are more than two programmes selected I get a red banner across the bottom of the screen telling me that "you can only record two programmes at the same time (VRC001)", without being able to easily find out via the box search system which programmes are in conflict.
    I cannot find any reference to this error code anywhere or fault message anywhere on the internet.
    Has anyone else had this problem?

    Hi Expert_Tech,
    Thanks for the post and welcome to the forum.  Sorry to hear of the problem you are having with your BT Vision service.  I would like to look into this for you.  I will need your details to do this.
    Please drop me an email via the 'Contact Us' link in my profile. (click on my name and you will find the link under the "about me" section). Include your BT account details and the link to this thread.
    Cheers
    Sean
    BTCare Community Manager
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Lost HD & Sport channels on black BT Vision box

    Hi, I was advised to do a factory re-set on my black BT Vision box because it was performing so poorly but since doing so I can no longer get my HD or sport channels (BT Sport 1 & 2, Sky Sports 1,2 & 5) back.
    Prior to doing the reset I only had the HD & sport channels as I had such a poor aerial in the roof. Doing the factory re-set meant I had to have a functioning aerial to re-scan for all the channels so I fixed the aerial & whilst it means I can now get all the freeview channels I can't now get any of the HD or sport channels back that I pay for!
    BT initially thought it was an issue at the exhange but having gone through several re-sets, re-scans, re-registers & re-boots they've finally agreed to get an engineer out.
    In another two weeks time!
    Anyone got any suggestions as to what might be causing this & therefore how I might be able to fix without waiting for the engineer visit?
    thanks

    Either the entitlements are missing or you are on the wrong version of the software. This can sometimes happen initially after a reset.
    What does it say for Help & Settings > Settings > System Information > BT TV Release ?
    If it ends in C (such as 8.7.1C) then you are on the version for using a viewing card.
    If it ends in E (such as 8.7.1E) then you are on the version for multicast channels over broadband which is what you need.
    If on the C version then try the following.
    Help & Settings > Settings > System Information > Reset Registration
    Help & Settings > Settings > System Information > Check for Upgrade
    In my experience that usually encourages it to download and install the correct E version again.

  • New replacement (black) BT Vision box

    New black vision box arrived today, installed, but trouble. Most channels are not available and others have distorted sound and picture. ITV1 is OK cannot get BB1 and many others. The Vision box is connected direct to the TV, no other device inbetween. Switched off scanned again. Same result. BT India say I have a signal problem which is not their problem. I had no such problem with the silver box. BT India say I cannot reuse it as it has been deactivated. I am sorry I laid eyes on the black box which I did not want anyway.  Any advice please?
    Solved!
    Go to Solution.

    Does the menu run along top or left hand side.
    If left you are on the new OS and will not be able to check signal strength, sadly.
    Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Helpful Post?
    If a post has been helpful, say thanks by clicking the ratings star.

  • New Black BT Vision box - what is missing, a discu...

    Maybe it's just me but here is a list of things which are currently missing or wrong with the new BT Vision box (black edition with new interface and OS). Thought it might be useful to keep a list of these going which people can add to.
    would also appreciate it if anyone can help with any of these issues in case i've missed something
    Red button doesn't work - believe this is  'coming soon'. you can still access the channels by going to 301 or 302
    Teletext doesn't work - the button pops up a message saying it's not available, coming soon?
    There is no way to set recordings to over run? - this used to be very handy on old box, particularly with live shows. is this being brought back?
    No signal strength tester - you used to be able to check digital signal reception strength and quality from the settings menu, not any more
    Pressing 'play' when viewing a recording doesn't flash up the progress bar - any other good way to do this, used to be handy. Fix: pressing "select" does the trick
    no HD Freeview - the box isn't capable, wondering whether they might upgrade us to YouView later on for this?
    No options to set resolution - used to be able to define 720p or 1080i for instance, not any more
    Sky Sports small white box - a small logo in the bottom right area, not sure what this is or why it's now there?
    Subtitles on iPlayer missing
    Some reported picture quality issues - both on SCART and HDMI
    On the plus side:
    Bigger capacity on the hard disc
    Faster inteface and movement between sections
    Nice new design and sharp interface resolution
    Channel logos / graphics now in the information bar menu
    When in the TV Guide there's still a small box showing you what you are watching on the current channel
    Music playlist
    Bookmarks
    Reinstatement of the 30s jump and better fast-forward / rewind (30s jump doesn't work on Sky Sports)
    Ability to jump to specific point in recordings (you need to start it first, then stop and go back into it to have option)
    Ability to reenter a recording at a time offset
    Icon to show which recordings have been watched
    HD iPlayer
    Recently viewed in iPlayer
    Ability to resume a programme on iPlayer
    Ability to resume on demand
    Disk usage on Recordings page
    Auto switching format for HDMI and SCARTOne-press toggling of Subtitles and Audio
    Previous channel facility
    'Play all' feature for On Demand series
    anything else people want to add?

    Subtitles on iPlayer
    Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Helpful Post?
    If a post has been helpful, say thanks by clicking the ratings star.

  • Signal strength finder via black bt vision box

    I have recently changed from sky (could be a big mistake) and have had constant troubles ever since.
    The latest is I am getting pixelation on all tv channels.
    Looking at the online "help" I have checked the aerial connections (all good), Aerial (brand new £50) and pointed in the correct direction. The next item was to use the handy signal strength checker as per BT's instructions. 
    However these do not appear to match what appears on screen.
    You can check your Freeview signal using your Vision+ box, but please be aware that checking your signal will interrupt any recordings that are in progress. You only need to check the signal of one channel in a multiplex to know what signal you'll be getting for the whole multiplex.
    How to check your signal:
    Press the BT Vision button on your remote control.
    DID THIS
    Scroll across to Settings.
    SCROLL ACROSS GOES TO TV SO I SCROLLED DOWN.
    NO "SETTINGS" PAGE SO WENT TO "HELP & SETTINGS"
    Select TV Settings.
    DID THIS
    Select the DTT Signal Strength page.
    NO "DTT SIGNAL STRENGTH" PAGE THE ONLY OPTIONS ARE 1/sCAN FOR CHANNELS, 2/ CHANNEL MANAGEMENT, 3/ TV SHAPE.
    The minimum signal strength and quality you need for a good picture is: 
    Signal Strength - 55% 
    Signal Quality -70%
    Am I going mad ?
    Can anyone help please?
    Solved!
    Go to Solution.

    There is good news and bad news. The good news is that you are not going mad. The bad news is that you have a new version of the software which unfortunately doesn't include a signal strength tool.
    Does your TV have a Freeview tuner? If so, try using signal strength on that.
    Your signal could be too weak or too strong. If it's too weak you may be able to use a booster. If it's too strong you can use an attenuator.

  • Up grade software on black bt vision box and new b...

    Just had upgrade on bt vision box and states i have no broadband connection. (direct connection to router)  I had to go into router and turn off smart set-up.  now what ever happened to the old plug and play.  your standard job bloggs is going to rip his hair out.  found no information any where.  GOOD LUCK PEOPLE.

    Subtitles on iPlayer
    Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Helpful Post?
    If a post has been helpful, say thanks by clicking the ratings star.

  • Black BT Vision+ box keeps rebooting.

    Our box keeps switching itself off, then going through the start up procedure 3 or 4 times a night for quite a while now. This makes watching anything impossible and very frustrating. We had the update on 09 Sep but it is still rebooting! I have contacted BT re this and waiting for a reply. Has anyone else had this problem?

    Sorry to hear about your problem.
    Please go to Help & Settings, Settings, TV Settings and select Scan for Channels. This should take 3 or 4 minutes. It won't affect any existing or future recordings but will stop any recordings currently in progress, so make sure nothing is being recorded or about to be recorded.
    This may resolve your reboot problem as it causes various internal databases to be rebuilt. Please let us know if it helps.
    BT TV Expert
    I am a BT Employee and an expert on TV queries. I am here to give advice primarily on the BT Vision+ box. Go Here for more info.
    If my post has been helpful, please click on the Ratings star on the left-hand side of the post.

  • Can I get a new Black BT Vision box?

    I have noticed of late my silver box is being very tempremental with recordings not working correctly, I have been with BT for 2 years and have just signed up to another year in Feb. Is it possible I can get one / order one for free?

    You should have negotiated it as part of your contract renewal.
    If you're having problems speak with the helpdesk. If they think it needs replaced you might get lucky and get a black one, although they could replace like for like.
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution’

  • New BT Vision Box delivered out of the blue

    I have had a brand new black BT Vision Box delivered this morning out of the blue(I currently have on of the old silver boxes). The letter indicated that they were issueing everyone with a new box due to features being rolled out and that the silver box will stop working in 28 days. I have an almost full hard drive of programs and films and there is no way of transfering the data accross. They advise us to watch everything before sending the box back in a prepaid envelope.
    As I don't want anything new to be recorded on the old box can I set up my new black box and still watch the recordings on the old box?
    Solved!
    Go to Solution.

    rewsan wrote:
    As I don't want anything new to be recorded on the old box can I set up my new black box and still watch the recordings on the old box?
    Yes you can, but what you would need to do is -
    leave the silver box plugged in to the mains and connected to the hub via the ethernet cable
    then remove the ethernet cable from the silver box and connect this cable to the black box
    switch the black box on and allow it to boot up
    The silver box will then run and allow you to watch your recorded content
    (putting the silver box in to standby is fine, but don't unplug the mains supply)
    -+-No longer a forum member-+-

  • New standard Bt vision box v Youview box

    I am bit confused, I know BT vision is about to start giving Humax Youview box to it subscribers I thought this was to replace the old silver BT vision Boxs howevervier I notice that bt has already started supplying new ( black) BT vision box's. Are the youview box replacing the these black standard  BT visions box or are both types still likely to be supplied. If the later what do you get on the black standard Bt vision that you can not get on the youview box?

    The 1st generation BT Vision box was the grey one you refer to.
    The 2nd generation BT Vision black box has been in use for a few years now.
    There are suggestions that BT are testing a 3rd generation BT Vision HD box, but this is still under development and there are no official details on that yet.
    The BT Youview HD box will be a separate thing. It is not designed to replace the BT Vision boxes. It gives those who want to make use of other non-BT Youview services an option to do that. However the BT Vision services via Youview will not be as comprehensive as those provided via the official BT Vision boxes.
    See this BT help page.
    BT Youview v BT Vision
    Also see this previous thread discussing the differences.
    Bt-vision-2-vs-you-view
    Personally I don't really see the point of BT having their own branded Youview box. If people want a Youview box they can just go and choose one from those on offer in the shops. As far as I know Sky have no plans to create a Sky branded Youview box, yet they will still offer services on Youview. But who am I to say. 

  • BT Vision Box unable to show Freeview HD channels ...

    I have been sent a BT vision box due to the fact my Youview Box is unable to have the skysports channels I was told this was a newer box I was told on the phone and my youview box was outdated when I suscribed to the Skyports channels just last week. I plug in my BT vision box everything is fine except I am unable to watch Freeview HD channels.
    The Problem is my BT Vision Box shows the Sport Channels except the freeview HD Channels, I get them on normal.
    My Youview box shows the Freeview HD Channels and everything else expect the Sky sports channels.
    I have spent 2 hours on the phone last week with the technical support team and probably even more as I called twice they even put me through to the sales team because I said I wasnt suscribed to freeview channels (because thats what it says on the TV) and everyone was telling me I was suscribed and I was unable to view the Freeview HD channels. I even took a day off work which I will not get back to get a freeview engineer guy to come to my house which the BT technical team sent and tell me theres nothing he can do and he checked my signal and said it was perfect and told me the Youview box was newer and the BT vision box was older even though I was told vice versa by a BT sales rep when I bought the Skysports channels.
    So can someone help me so I can view all my channels I have and not have to swap between boxes and I do not want to speak people on the other side of the world to sort my problem out.
    I have done the search channel and reset the box which has not worked.

    bruceg87 wrote:
    I have been sent a BT vision box due to the fact my Youview Box is unable to have the skysports channels I was told this was a newer box I was told on the phone and my youview box was outdated when I suscribed to the Skyports channels just last week.  
    Utter nonsense! The black BT Vision+ box came out at least 3.5 years ago. The BT Youview box came out just over 1 year ago.
    The reason you can't have Sky Sports over Infinity on the BT Youview box is because Sky haven't agreed to let BT resell Sky Sports on that platform. It's not due to any technical limitation. BT have asked Ofcom to look into this.
    The reason you can't pick up the Freeview HD channels over the aerial using the BT Vision+ box is because it is a much older box and doesn't have Freeview HD (DVB-T2) tuners. You need to pick them up over Infinity by getting the 'PSB HD' multicast entitlement added to your account.
    The person on the phone was talking rubbish. The engineer was talking sense. His trip to your house sounds like a total waste of both your time and his time. At least BT paid for it I assume.

  • BT Vision box and infinity

    Hi
    We are considering changing to BT Infinity from normal BT broadband.
    We currently have a black BT Vision Box (not yet updated) connected to an upstairs hub using the plug in black powerline adapters.
    We paid about £60 to buy the box outright a couple of years ago so don't pay any monthly fee for Vision. We do occasionally 'buy' a film and the cost of this is added to our monthly BT bill. As this dosn't happen very often there is no ongoing cost to us of using the Vision Box for BBC iplayer or for recording, rewinding live TV etc
    Would this change if we upgraded to infinity as I can only see the option of about £5 a month to use a vision box
    Thank you

    Not in the least. There is no problem at all in upgrading to Infinity it will not affect your PAYG option.
    Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Helpful Post?
    If a post has been helpful, say thanks by clicking the ratings star.

  • BT Vision box freezing but tv picture still in the...

    Hi,
    I am hoping someone can help.
    I have the black bt vision box and it appears to have stopped working.
    When I reboot it I have about ten seconds where I can control it using the remote. After that whatever menu is on the screen after that point stays jammed on the screen yet the tv picture in the background continues to stream live. I can't do anything at all except continue to watch what channel is on the screen when it stops responding.
    Any help is much appreciated. I've had a search and can't find anyone with the same problem.
    Solved!
    Go to Solution.

    As a test what happens if you reboot with the aerial and Ethernet disconnected? Does it remain responsive after a few minutes?
    If so start a "Scan for channels" in TV Settings and immediately reconnect the aerial.
    It is just a hunch but I'm thinking the TV Guide EPG database may have been corrupted causing it to crash as soon as it receives a new EPG update. A tuner scan well flush the EPG database and may fix it.

  • BT Vision Box and Remote Control not working prope...

    Hi,
    Can anybody help me please?
    I have a black BT Vision Box. The remote control had increasingly been sticking so tonight I just turned the power off tonight, left it off for 20 seconds and turned it back on.
    It seemed to turn back on and reboot itself normally, it took the amount of time it normally does on a couple of occasions when it froze a few months back. However since I rebooted it approximately 3 hours ago it has been turning itself off and rebooting itself every 10 minutes or so. On one occasion when I turned it off on the front of the machine and left it for a few minutes, it turned itself on and started rebooting itself again. 
    The remote control is worse than when it was sticking, now there is a delay of up to 30 seconds after I press a button. Sometimes it does not work at all, when that happens it just becomes stuck and eventually reboots itself.
    So far I have tried turning it off and on again, I have also tried rebooting the internet connection (which is working fine). I have tried pressing the off button on the actual box for 10 seconds and resetting it that way. I have put new batteries in the remote. Nothing has worked. If anyone can help me that would be great.
    Solved!
    Go to Solution.

    Hi, 
    Unfortunately I can't get that far now.
    I turned all TV related systems off last night in an effort to see if it would work properly today.
    I came home from work and turned everything on. The system boots itself up until it gets to a grey screen that says "Nearly there..." with the BT logo in the bottom right corner. It stays like that for approximately one minute. Then it turns itself off and starts rebooting itself again. 
    I have tried pressing the on/off button on the front of the box and holding it in for 10 secs or so until the box turns itself off and reboots but the effect is still the same as above. 
    Do you have any other suggestions pleaase, aside from throwing it in the bin?

Maybe you are looking for

  • Filename variable w/out filename extension

    Hi, Is there a less kludgy way to create a variable that returns the filename without the filename extension, than putting a small, filled white box on top of it? Thanks, Mats Broberg

  • My ipod nano 6g don't turn on

    I can not connect my iPod nano, it only works when connected to your computer, just take it clears and does not care more

  • Wireless Mesh losing connectivity

    My client has a Cisco 2504 controller running 7.5.102.0 code.  They have 2602E APs as Mesh Root AP and Mesh APs.  The distance between the antennas is approximately 30 feet.  The client is complaining of constant drops.  To date I have configured pre

  • I keep getting Error 150:30 on my iMac 10.9.5 when I try to open CS4

    I recently updated my iMac, now I get the Error 150:30 when I try to open CS4 and Elements...I've already tried to troubleshoot as suggested in other threads and it does not work. Please Help?

  • Upgrade to SQL Server 2008 R2 fails

    I'm trying to upgrade from SQL Server 2008 Express to SQL Server 2008 R2 Enterprise. The installation is failing. I get two log files. The first appears to be a summary. The second is an MSI install log file. The MSI log is too large to paste in here